Used Telemecanique Lr9F5367 for sale (70)

Condition: good (used), Schütz, Schütze, Leistungsschütz Rjdpfob A H Ttox Ammsu -Power contactor: 18.5 kW -Coil voltage: 220 AC -Number: 19 available Price: per piece

Condition: good (used), Contactor, semiconductor contactor, contactor Rjdpfx Aeb A Hdnjmmou -Max. 30 kW 400 V -Quantity: 3 pieces available Price: per piece -Weight: 1.5 kg

Condition: excellent (used), Contactor, semiconductor contactor, contactor -Condition: unused, original packaging Rodpjb A N A Njfx Ammou -Power: max. 540 A 600 V AC -Quantity: 1 piece available -Dimensions: 260/250/H230 mm -Weight: 13 kg

Condition: good (used), Emergency stop switch, emergency pull switch -Type: XY2 CE1A290 Rjdpsb A R U Tofx Ammeu -Rope length: up to max. 50 m -Weight: 2 kg

Condition: good (used), Limit switches, push buttons, safety switches, position switches Rsdpfxsb A R U Sj Ammju Price: per piece -Number: 14 available -Weight: 0.3 kg

Condition: good (used), Position switch, drive for rotary axis actuation, electrical head with rotary axis Rjdpfx Amob A H Sfemou -Type: ZC2-JE01 Quantity: 10 available Price: per piece -Weight: 0.3 kg

Condition: good (used), Position switch, drive for rotary axis actuation, electrical head with rotary axis -Type: ZC2-JE61 Quantity: 5 available Redpfx Aob A Saaemmeu Price: per piece -Weight: 0.3 kg

Condition: good (used), Position switch, drive for rotary axis actuation, electrical head with rotary axis Rjdpfxeb A R U Uj Ammou -Type: ZC2-JE65 Quantity: 15 available Price: per piece -Weight: 0.2 kg

Condition: good (used), Inductive sensor, electronic sensor Rjdpfxsb A Rn Re Ammeu -Manufacturer: Telemecanique -Product Type: XS4 P30PA370B -Quantity: 3 available -Price: per piece -Weight: 0.2 kg

Condition: good (used), Limit switches, push buttons, safety switches, position switches Price: per piece Redob A Skmspfx Ammju -Limit switch: unused Quantity: 15 available -Weight: 0.2 kg

Condition: good (used), Motor protection switch, star-delta switch, reversing switch -Type: GV3 M10 -Adjustment range in Amps: 4-6 Price: per piece -Quantity: 4x Available Rjdpfx Amob A H E Rsmsu -Weight: 0.7 kg

Condition: good (used), Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, load break switches, disconnectors Rodpfx Amjw S Tq Somju -Manufacturer: Telemecanique, motor protection switch unused -Type: GV2 ME10 / 4-6.3A -Undervoltage release: Schneider GVAX385 -Dimensions: 145/90/H85 mm -Weight: 0.7 kg

Condition: excellent (used), machine/vehicle number: 203108, Telemecanique Modicon OPC3715004AA Operating computer technical data: Type: OPC3715004AA Serial number: 203108 Version number: 192.F Cooling: SS-250U1 100V - 240V 250W The control panel and part of the monitor are unfortunately scratched. Otherwise the device is in good condition You can find more items—both new and used—in our shop! Rodpfeu D Eh Hjx Ammsu International shipping costs on request!

Condition: new, Telemecanique TXT LPL7 M37V42 Software ,unused in original packaging, 100% functional, scope of delivery according to photos Rjdpfx Amoxah T Nemju

Condition: new, Telemecanique TSX L PL7 3 V42 software, unused in original packaging, 100% functional, scope of delivery as per photos Redpjxah Tvsfx Ammou

Condition: new, Telemecanique TSX TPE01 Prom Programmer, unused in original packaging, 100% functional, scope of delivery as per photos Rsdexah T Aopfx Ammou

Condition: ready for operation (used), Telemecanique / Schneider ATV58FHD16N4 frequency inverter SN, used, in good condition, 100% fully functional, scope of delivery as per photos. Rodpfxjx Eu Tpo Ammju

Condition: ready for operation (used), Telemecanique ATV18D16N4 ALTIVAR 18 frequency inverter SN:1028116112, used, normal signs of wear, 100% functional, scope of delivery as per photos. Rsdpfsx Dxqgjx Ammeu

Year of construction: 2012, condition: excellent (used), machine/vehicle number: HIKSA250Aneu, Complete Telemecanique / Schneider Canalis KSA - 400A busbar system available! Stock 75 running meters!!! Type KSA 250A / 250 amps - 5 poles - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length predominantly 5m, also 1.5m and 3m available Price per meter including connectors, end pieces and brackets Rsdpepgmryefx Ammsu Feed and outlet boxes 16-32-63A are available as options (other tap-off boxes 125 - 250A available on request) The dismantling was carried out by a qualified electrician. Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system?

Condition: ready for operation (used), Num Telemecanique display unit 1060 / 205202101 control panel SN:1470 with Nokia 44BE 14" monitor, used, normal signs of wear, 100% functional, delivery scope as per photos. Rjdex Et Sdepfx Ammsu

Condition: ready for operation (used), Year of construction: 2007, operating hours: 20,700 h, pressing force: 337 t, overall weight: 24,000 kg, travel distance X-axis: 800 mm, controller manufacturer: DELEM, controller model: DA-66W, number of axes: 6, This 6-axis GASPARINI PSG 330/4000 Variante C was manufactured in 2007. It features a bending force of 330 tons and a useful bending length of 4100 mm. The machine includes a stroke of 400 mm and an X-axis travel of 800 mm. If you are looking to get high-quality bending capabilities, consider the GASPARINI PSG 330/4000 Variante C press brake we have for sale. Contact us for further details. Rjdpfsy U Hwrjx Ammou - Distance Between Uprights: 3600 mm- Stroke: 400 mm- Installation Height: 600 mm- Throat: 500 mm- Approach Speed: 0 - 200 mm/sek- Return Speed: 0 - 125 mm/sek- Working Speed: 0 - 8.5 mm/sek- X-Axis Speed: 300 mm/s- X-Axis Accuracy: ±0.05 mm- R-Axis Stroke: 250 mm- R-Axis Speed: 160 mm/s- R-Axis Accuracy: ±0.1 mm- Z-Axis Speed (Option): 1000 mm/s- Z-Axis Accuracy (Option): ±0.25 mm- Z-Axis Repeatability (Option): ±0.15 mm- Motor Power: 30 kW- Oil Tank Capacity: 420 L- Recommended Hydraulic Oil: Shell Tellus Oil TX 46- Machine Weight: ca. 24 Ton- Table Width: 90 mm- Working Height: 965 mm- Hydraulic Components: Rexroth- Electrical Components: Telemecanique- Pneumatic Components: SMC- Control Unit CNC: Delem DA-66W- Safety System: Nuova Elettronica DFS Laser Beam - RX (Type 4 Safety Device)- Power Supply: 400V / 50Hz- Machine hours: 20,700 / 2,000,000 strokes- CNC controlled Z1-Z2-Z5 with 6-axis control DA - 66 W- Tool holder with upper and lower jaw clamping system Technical Specification Bending Length 4100 mm

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Rodpfx Amjy R Npiemeu Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: VKE / FLPS2 – 4APC/S, type of input current: three-phase, Automatic Vertical Strapping Machine VKE / FLPS2 – 4APC/S Current Status & Availability: The strapping system is fully operational and is currently still in daily use. Availability: The entire system is currently fully integrated into the production process and can be inspected under operating conditions after prior arrangement. The planned dismantling/replacement must be carried out by the buyer during calendar week 46-47 / 2026. Technical Data: Pallet Types: Pallet width 500 to 1000 mm Pallet length 600 to 1200 mm Package height (incl. pallet) min. 500 - max. 2000 mm Conveyor height 500 mm Weight (incl. pallet) 150 to 1000 kg Package stacking method: automatic Under-stretching: no Conveyor speed: 12 m / min Pallet transport direction: lengthwise onto lengthwise boards Centering accuracy: centered on the stop light barrier Machine Components: Pneumatics: Festo Gear motors: SEW Control system: PLC S7-200 Control cabinet: Rittal Protection class: IP 55 Rodpfx Asy Szflommsu Main switch: Möller Fuses: Siemens Relays: Omron Push buttons: Siemens Signal lights: Telemecanique Light sensors / light barriers: Datalogic Inductive proximity sensors: Omron / Siemens Cam switches: Siemens Contactors: Telemecanique

Condition: used, Year of construction: 2003, 1 used very good condition universal milling machine with 3-axis digital display FAGOR, stepless feed and top support drive Make: ARSENAL, Bulgaria Model: FUV 321 M year of manufacture: 2003 Technical data: Spindles: Spindle mounting vertical + horizontal ISO 50 Speed range, vertical, infinitely variable 30 - 2000 rpm Speed range, horizontal, infinitely variable 30- 2000 rpm Table: Table clamping surface 1350 x 320 mm X-axis, manual / mechanical 1100 / 1080 mm Y-axis, manual / mechanical 360 / 340 mm Z-axis, manual / mechanical 460 / 440 mm Upper arm adjustment approx. 600 mm table tiltable ± 45 max. distance table surface to horizontal spindle center 490 mm max. distance table surface to vertical spindle nose 630 mm Rsdpfx Ajbpmuremmsu table adjustment: feeds lengthwise and crosswise, infinitely variable 12.5 - 630 mm/min ditto vertical, infinitely variable 5 - 262 mm/min rapid traverse longitudinal and transverse 2,5 m/min ditto vertical 1,04 m/min Drive drive power 7,5 kW Dimensions and weight Dimensions L x W x H 2000 x 2500 x 2050 mm Weight 3200 kg Accessories / Special features: - 3-axis digital display make FAGOR model NV 300 M - Universal milling head system "HURON" manually adjustable over 2 levels - Stepless feed via joystick and potentiometer in all 3 axes - Stepless speed for vertical + horizontal via potentiometer with 2 servo drives make TELEMECANIQUE model Altivar 28 - Stepless feed and stepless speed with digital display in each case - Upper arm with motor drive of the universal milling head - E [...]

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Rjdpfevf E Avox Ammju Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.