Used Telemecanique Signal Tower for sale (2,736)

Condition: used, Year of construction: 2016, Overview This Scaligera ULISSE 4000 is a sleeve labeling machine for cans, built in 2016 by Scaligera Packaging in Italy. It applies sleeves to sleek and standard cans at up to 4,000 cans per hour and comes with its matching Scaligera steam shrink tunnel from the same year. The line ran carbonated soft drinks in cans and was in production until early September 2023. The machine runs left to right. Sleeves are cut from the reel, opened and placed over the can in the sleever; the steam tunnel then shrinks them tight onto the can body. Technical data - Manufacturer: Scaligera - Model: ULISSE 4000 - Year of manufacture: 2016 - Machine type: sleeve labeler with steam shrink tunnel - Output: up to 4,000 cans/h - Containers: sleek and standard cans Godpfxoz H N Hhe Afujbu - Machine direction: left to right - Power supply: 400 V, 3-phase, 50 Hz - Connected load: 8 kW in total (sleever 2 kW, steam tunnel 6 kW) - Max. current: sleever 7 A, steam tunnel 10 A - Compressed air (sleever): 6 bar - Steam supply (tunnel): 6 bar, up to 200 kg/h - Weight: sleever approx. 850 kg, steam tunnel approx. 350 kg - CE mark on both machine plates Equipment - Scaligera ULISSE 4000 sleeve applicator with infeed screw and guarded, windowed housing - Scaligera TVP2SE steam shrink tunnel (2016) with two inspection windows and pressure gauges - Electrical control cabinet with push-button operation and signal tower Condition Used. The machine was in production until early September 2023 and is now dismantled, so it cannot be shown in operation. Sold without warranty. Availability Immediately. Location: Belgium.

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 300062271 / 800305248, Equipment: CE marking, NEW (USED for 1 test) The HABITAT control tower package is ideally suited for HABITAT’s cell culture applications, enabling advanced monitoring and control of bioprocesses. This package features the control unit with comprehensive connection options for gas supply, liquid addition, sensors, and temperature regulation, complemented by a tablet for straightforward and clear operation of the bioreactor. Process Control & Monitoring: All bioprocess parameters and associated test values can be conveniently managed and monitored via the integrated tablet, which is attached to the control unit. The intuitive, user-friendly software allows selection between batch, fed-batch, and perfusion/continuous operation modes, depending on your cultivation requirements. The new 'Chaotic Mixing' feature enables rapid and effective mixing when needed. The 10.4-inch touchscreen tablet provides direct access to all actuators from the main interface. Key functionalities include clear calibration management, diagram overviews, and comprehensive process documentation. An optional software version compliant with FDA CFR Part 11 requirements is available. Gbodjy D Rq Ujpfx Afuju Key Features: - Compact, space-saving design: 223 x 402 x 450 mm (WxDxH) - Large 10.4-inch tablet for user-friendly operation - Intuitive software with extensive features - 4 integrated Watson Marlow fast-load pumps - Multiple interfaces: USB, PC, RS232, Ethernet, external signal input, external pump, single-use unit, thermostat - Data storage capabilities The 1L vessel set for the HABITAT research bioreactor includes a 1-liter single-walled glass vessel designed for cell culture applications, alongside a compatible stirring drive. In conjunction with the separately available control tower package (e.g., HABITAT cell), you receive all essential components for successful cultivation.

Condition: ready for operation (used), Year of construction: 2025, operating hours: 1,351 h, controller manufacturer: FANUC, controller model: i Series iPlus, This 6-axis DN Solutions DNX 2100S Advanced was manufactured in 2025. It features a FANUC i-Series control, a 6-axis configuration including B and C axes, and a tool magazine with 60 positions. The machine offers full turn-mill capabilities, through-spindle coolant up to 70 bar, and a Renishaw probing system. Consider the opportunity to buy this DN Solutions DNX 2100S turn-mill centre. Contact us for more information about this machine. • Axes Configuration: 6 axes (X, Y, Z, B, C1, C2) • B-axis milling spindle (indexing accuracy 0.0001°) • Milling/Main Spindle: • Tool Interface: HSK-C63 • Max Speed: 12000 rpm • Power: 18.5 / 15 kW • Max Torque: 58 Nm • B-axis Travel: 240° (±120°) • Left Spindle: • Chuck Size: Ø255 mm (10") • Max Speed: 4000 rpm • Power: 22 / 15 kW • Max Torque: 456 Nm • Right (Sub) Spindle: • Chuck Size: Ø210 mm (8") • Max Speed: 5000 rpm • Power: 18.5 / 15 kW • Max Torque: 326 Nm • Tool Magazine: 60 positions • Features: Driven tools, Full turn-mill capability • Through-Spindle Coolant: 70 bar • Programmable Coolant Pressure (7 steps) • Coolant Through Opposite Spindle • Oil Skimmer Gbsdpfx Afozv Ruujuou • Chuck Washing • Work Area Washing: 4.5 bar • Coolant Level and Pressure Monitoring • Oil Mist Collector Preparation • Hinged Belt Chip Conveyor • Renishaw Probing System (Measuring Head Included) • Automatic Tool Measurement • Radio Tool Measurement System RMP60 • Manual Pulse Generator (MPG) • 3-Color Signal Tower

Condition: excellent (used), machine/vehicle number: 203108, Telemecanique Modicon OPC3715004AA Operator Panel Technical Data: Type: OPC3715004AA Serial Number: 203108 Version Number: 192.F Cooling: SS-250U1 100V - 240V 250W Unfortunately, the operator panel and part of the monitor have scratches. Gjdpeu D Eh Hjfx Afuebu Otherwise, the device is in good condition.

Condition: used, Equipment: hydraulics, Product description Every high-rise project is different – and so is every building profile. Our custom-designed common tower is a fully modular system that is designed around the specific shape, dimensions, and logistics of your project. Whether the facade is recessed, curved, or changes profile at a certain height, the tower can be configured to follow the contours of the building, while the construction hoists themselves are installed quickly and in a conventional manner. By consolidating all vertical transport into a single, custom-designed structure, construction logistics become a streamlined process: a single central point for loading and unloading, fewer facade openings, and hoists that operate at full capacity throughout the construction period. Key benefits Centralized loading and unloading – all material and personnel flows via a single logistics point Reduced crane and hook time – the tower crane remains available for structural work Maximum hoist utilization – the hoists efficiently serve every floor from a single tower Minimal facade openings – small anchoring recesses keep the building envelope intact Increased safety – a controlled, protected transport route for people and goods at height Fully custom-designed – tailored to your building profile and construction schedule Faster completion, earlier weather-tightness A custom-designed common tower does more than just move materials. Thanks to a clever anchoring system, facade panels can be installed continuously around the tower, allowing floors to be closed and made weatherproof earlier. This means that finishing trades can start sooner – and your overall construction time is reduced. In combination with high-capacity personnel/goods hoists, the tower also enables the vertical transport of large loads, such as large facade elements and prefabricated units, up to complete bathroom modules. Modular extensions The system can be expanded with practical modules, tailored to your construction site: Gsdpfx Aezmgdtsfusbu Loading docks – loading platforms at truck height, allowing goods to be transferred directly from truck to hoist without a forklift. This reduces handling and waiting times. Integrated stairs – safe, temporary staircases in the tower structure. Ideal as an additional escape route, with fewer anchor points and faster installation than traditional scaffolding stairs. Canopies / crash decks – tower components can be reused for protective decks that shield the area below from falling objects, or to create extra storage and working space – for example, above a public road. Designed for your project Our specialists design each common tower configuration in-house: from structural calculations and anchoring details to installation planning and logistics. The result: a vertical transport solution that fits your building like a glove and keeps your schedule on track, from shell construction to completion.

Condition: good (used), functionality: fully functional, Year of construction: 2013, load capacity: 200 kg, lifting height: 4,500 mm, platform length: 1,195 mm, platform width: 750 mm, overall weight: 485 kg, empty load weight: 285 kg, Power Towers Nano Vertical Manlift – Year of Manufacture 2013 – Used For sale is a used Power Towers Nano Vertical Manlift from the year 2013. This compact, self-propelled aerial work platform was specifically designed for work in confined indoor spaces and impresses with its high maneuverability, ease of operation, and low weight. It is ideal for maintenance, installation, electrical, painting, and renovation work. Technical Data: Manufacturer: Power Towers Model: Nano Vertical Manlift Year of Manufacture: 2013 Self-propelled Godpfx Ajzmfrpjfuebu Maximum working height: approx. 4.50 m Compact design – ideal for narrow passages and indoor areas Low weight – also suitable for sensitive floors The aerial work platform is in used, functional condition and shows the usual signs of wear and tear for its age. If you are interested or have any questions, please do not hesitate to contact us. An inspection can be arranged at any time by prior appointment. *Working Dimensions* - *Maximum working height*: 4.50 m - *Maximum platform height*: 2.50 m - *Platform dimensions*: 1.00 m x 0.73 m - *Footprint*: 1.19 m x 0.75 m - *Permissible load capacity*: 200 kg (1 person + tools) - *Max. manual force*: 200 N - *Max. slope during operation*: 0° - *Max. wind speed*: Only for indoor use, 0 mph - *Manual pushing force on level ground*: 9 kg - *Max. total weight including payload*: 485 kg - *Max. load at wheel contact point*: 180 kg (1.77 kN) - *Max. wheel force*: 1.75 kN *Dimensions in folded state* - *Length*: 1.195 m - *Width*: 0.750 m - *Height*: 1.560 m - *Weight*: 285 kg *Power Supply* - Standard 12V DC electric motor - Or 240V AC electric motor 13A connection - Or 110V AC electric motor 16A connection *Battery Charger - Technical Data* - *Input voltage*: - Single voltage: 90-135V AC (UK) / 180-265V AC (outside UK) - Dual voltage: 90-265V AC - *Frequency*: 45-65 Hz - *Output*: 12V DC, 7A - *Sound power level*: Less than 70 dBA - *Emissions EN 55014N, EN 61000-3-2*

Condition: good (used), Year of construction: 2011, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMU 80 P duoBlock Year of construction: 2011 Control system: Heidenhain iTNC 530 Technical data: Gbedpez Ebzujfx Afuju Travel ranges: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 800 mm Main spindle: Max. spindle speed: 18,000 rpm Rotary table: Table diameter: d 900 x 700 mm Tool changer: Tool holder: HSK-A63 Number of tool positions: 60 Operating hours: approx. 49,285 h Spindle hours: approx. 15,380 h Technical features & accessories: - Universal milling head with controlled B-axis - Coolant tank 500 l - Internal coolant supply 40 bar - Chip conveyor with integrated fabric band filter - Rotating viewing window - Infrared measuring probe, manufacturer Heidenhain TS 649 (if available) - Preparation for 3D quickSET - Signal tower, 4 colors - Flushing gun - Cooling system with compressed air through the spindle center - Electronic handwheel (if available) - Operating mode 4 Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Year of construction: 2014, operating hours: 40,000 h, condition: used, functionality: fully functional, belt width: 560 mm, number of shelf rows: 8, machine/vehicle number: B6, High-Capacity Industrial Ambient Spiral Cooling Conveyor Tower Heavy-duty 8*2 -tier ambient spiral cooling tower engineered for food production and industrial bakery applications. Built entirely with a high-grade stainless steel frame and structure, ideal for washdown environments and strict hygiene standards. Key Technical Specifications: Tier Count: 16 continuous spiral tiers / turns. Belt Width: 560 mm food-grade blue open-mesh modular belt for maximum air circulation and product stability. Drive System: Heavy-duty Brevini / Rossi industrial planetary gear drive motor assembly. Control System: Freestanding stainless steel electrical control cabinet featuring a Siemens SIMATIC HMI touch display panel, integrated VFD variable speed frequency drives, and emergency safety stops. Applications: Suitable for ambient cooling of baked goods, confectionery, wafers, packaged products, and snack items prior to packaging. Gjdjz E A Rkepfx Afusbu Condition: Used, Dismantled ،fully functional, clean, and in very good working condition.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 VACUUM EXTRUDING MACHINE mod. STORM WB Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Turbines capacity (each) Gbodpfx Afstqu Dieuju mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. 5) The automatic filling system activates for the new product.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, overall weight: 300 kg, LANG Clamping Tower 70850 with Grid Plates 75710 and Arbor Clamps 48155-125 2 towers with plates and arbor clamps are available! We offer a high-quality LANG Clamping Tower 70850 with matching Grid Plates 75710 and Arbor Clamps 48155-125. This clamping system is ideally suited for precise and efficient 5-axis machining as well as multi-sided machining on CNC machining centers. Technical data: Manufacturer: LANG Technik Godpfxsztzi Rj Afujbu Type: Clamping Tower 70850 Accessories: 8 x Grid Plate 75710 Clamping system with grid hole pattern High repeatability Robust design for industrial use Ideal for automated manufacturing and setup time optimization Condition: Used, technically perfect. Normal signs of wear and tear consistent with age and use. Scope of delivery: 1 x LANG Clamping Tower 70850 8 x LANG Grid Plates 75710 4 x Arbor Clamps 48155-125 The clamping tower enables optimal use of the machine's working area and increases productivity by machining multiple workpieces in a single setup. Inspection possible by appointment. Shipping or collection by arrangement.

Condition: excellent (used), Year of construction: 2014, 2014 Schneeberger Sirius HPM 6-Axis Tool Grinding Machine With Fanuc Series 31I-Model A5 CNC Control Gbedpfx Afsz E R T Hsuou Gear Tooth Production Steptec GFQ 170E Swivel Spindle Workhead. Travel: 'X' Axis = 420mm, 'Y' Axis = 310mm, 'Z' Axis = 340mm. 'A' Axis (Rotation) = 2,400°/S. ISO40, Centre Height 150mm. Swivel Axis 'B' = 90°, Swivel Axis 'C' = 180°. (1) Hitema Stand Alone Air Cooled Liquid Chiller Type ENR.018/CX.SST.WP.HW.RV.DD.GALV (340kg, 2020). (1) Hyfra Pedia Sigma 13-S Stand Alone Water Cooling Chiller (200kg, 2014). VAS 7041, 400 Litre Stand Alone Filtration System (800mm x 1,300mm x 600mm, 400kg). Sirius S/No. 21828. Quantity of Assorted Arbors, Collets, Grinding Attachments & Associated Tooling to Suit. Probe, Machine Light & Signal Tower. New Battery Fitted 2025. Kraft Bauer Fire Extinguishing System. Elbaron Ronia 100 DV Electrostatic Air Cleaner/Mist Collector. Cosmotec EVE10082207000 7035 Air Conditioner (2013). Power Supply 415 Volt, 3 Phase. Full Catalogues & Manuals Available. Weight of Machine Approx 8,100kg. Dimensions of Machine Approx 1,700mm x 2,270mm x 2,215mm. Note: Client will arrange for the machine to be disconnected and drain the oil (if required) and move to the Exit for collection. During viewing, Client is willing to demonstrate the machine capabilities.

Condition: used, Year of construction: 2005, Overview Gbedpjz Rnduefx Afuju This HEUFT SPECTRUM DELTA-K is a 3-lane bottle distributor (repartitor) from a winery. The bottles pass the HEUFT SPECTRUM control head with signal tower, and three HEUFT DELTA-K rejectors divide the flow onto three lanes. In its last line it handled glass bottles of 375 ml, 750 ml and 1,000 ml at 6,000 bph, feeding a vertical case packer. The bottle conveyors, approx. 10 m, were built by ATECMI (France). The lane guides are adjustable with handwheels and clamping levers. The machine is still installed and can be visited on request. Technical data - Manufacturer: HEUFT, conveyors by ATECMI - Model: SPECTRUM DELTA-K - Year of manufacture: 2005 - Machine type: bottle distributor, 1 to 3 lanes - Containers: glass bottles 375 ml / 750 ml / 1,000 ml - Capacity: up to 72,000 bph (line output 6,000 bph) - Electrical supply: 230 V, 50/60 Hz, 800 VA - Compressed air: 6 to 10 bar Equipment - HEUFT SPECTRUM control head on column, with signal tower - 3 HEUFT DELTA-K rejectors - Bottle conveyors by ATECMI, approx. 10 m, with adjustable lane guides Condition Used, still installed. Availability Available immediately. Location: France. Dismantling and loading are to be organised by the buyer (EXW).

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Equipment: documentation/manual, KONICA MINOLTA ACCURIOLABEL 230 Digital Label Printing Press • Manufacturer: Konica Minolta • Model: AccurioLabel 230 • Year of manufacture: 2024 • Machine has been continuously maintained under a service contract _____ TECHNICAL SPECIFICATION Printing System • Digital toner-based label printing system • Resolution: 1,200 × 1,200 dpi × 8 bit • Equivalent image quality up to 1,200 × 3,600 dpi • Maximum print image size: 1,195 × 320 mm • Web width in present configuration: 325 – 333 mm Production Speeds Depending on substrate: • 23.4 m/min • 18.9 m/min • 13.5 m/min • 9.45 m/min The machine has mainly been operated at 13.5 m/min, as the current owner achieved the preferred print quality at this speed. All four production speed levels are available. _____ CONTROLLER • Konica Minolta IC-605B • Integrated controller Gjdjzx Ri Depfx Afusbu • Operator screen • Direct PDF printing from USB stick possible • Patlite LR4-PP signal tower _____ UNWINDER / REWINDER The machine is supplied complete with: • Integrated BST web guiding system • BST web guiding at both winding units This provides stable and accurate web transport throughout the production process. _____ OVERPRINT EQUIPMENT The machine is equipped with: • Overprint Kit with impression / registration sensor This allows accurate overprinting onto previously conventionally printed label material, making the machine particularly interesting for hybrid production environments. _____ WEB CLEANING & STATIC CONTROL Included: • Web cleaning system for AccurioLabel • Static Eliminator • SWG-400 antistatic brush These systems support clean substrate handling and reliable production, particularly when processing sensitive label materials. _____ SLITTING EQUIPMENT Included: • Longitudinal crush knife system • 3 pneumatic knives • Knife holders According to the present owner, this equipment has never been used. _____ COMPRESSED AIR EQUIPMENT Included:

Condition: not inspected (used), - Siemens 3SE5 122-0CB01 (1 piece) - Telemecanique XC2-JC IEC337-1 NFC63140 (1 piece) - Telemecanique XCKM EN/IEC60947-5-1 (7 pieces) - Telemecanique XCK-M IEC947.5.1 EN60 947.5.1 (3 pieces) - Telemecanique XCKJ EN/IEC 60947-5-1 (1 piece) - Schmersal TS 335-20z IEC60947-5-1 IP67 (1 piece) - Schmersal TV8S 335-11z-M20 IEC 60947-5-1 IP67 (1 piece) - Honeywell 1HP-125 VAC 2HP-250 (1 piece) Are you interested in this product or would you like more information? Please feel free to contact us. Gbodpfx Afezumlmousu Additional photos are available upon request. The price is negotiable. For more parts and other materials, you can also visit our website CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: used, Year of construction: 2011, load capacity: 200 kg, empty load weight: 351 kg, fuel type: electric, Power Tower Nano PTN45. Year 2011. Working height 4.5 meters. Weight 351 kg. Platform capacity 200 kg. 12-volt battery with a 230-volt charger. Operational. Video, photos, and additional information also available via WhatsApp! Gjdpfxoz H Aulo Afusbu Price net + 21% VAT, or net for export with VAT number. We speak Dutch. Wir sprechen Deutsch. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (NL) in as-is condition!

Condition: used, Year of construction: 2007, Overview This Logopak LOGOMATIC 920 II PF, built in 2007, is a print-and-apply labelling system for pallets. It prints labels by direct thermal or thermal transfer and applies them with a telescopic tamp applicator onto pallets standing still beside the conveyor. The machine is still installed at the end of a wine bottling and palletising line and can be inspected on site. Technical data - Manufacturer: Logopak - Model: LOGOMATIC 920 II PF - Year of manufacture: 2007 - Machine type: print-and-apply pallet labeller - Output: 4 labels/min - Print methods: direct thermal and thermal transfer - Label size: 148 x 210 mm (W x H), 3 mm gap - Label roll: max. diameter 400 mm, core diameter 76 mm (150 mm) - Mounting: vertical, print head at the bottom - Control: Logopak POWER LEAP II - Interfaces: W&T COM server, RS 232 - Power supply: 88 - 240 V AC, 50/60 Hz; 7 A at 115 V, 3.5 A at 230 V Gedjz Hbp Iepfx Afusbu - Compressed air: required (valve block and vacuum generator) - Overall dimensions (L x W x H): 1,530 x 1,000 x 2,910 mm Equipment - Labelling unit in a closed cabinet with two windowed doors - Label unwinder, printer and telescopic tamp applicator - Control box on the machine frame with display terminal, start/stop, emergency stop, auto/bypass key switch and main switch - Bypass function and three-colour signal tower - Floor frame with foot plates for anchoring beside the pallet conveyor - CE marked; operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: new, Year of construction: 2023, operating hours: 687 h, functionality: fully functional, machine/vehicle number: 9353740, turning diameter over cross slide: 318 mm, turning length: 470 mm, turning diameter: 260 mm, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 600 mm, spindle motor power: 15 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,900 mm, total length: 2,900 mm, total width: 1,600 mm, feed length X-axis: 220 mm, feed length Z-axis: 600 mm, quill diameter: 52 mm, overall weight: 3,600 kg, bar passage: 52 mm, Equipment: documentation/manual, For sale: High-precision CNC lathe Accuway Machinery UT200-M, equipped with Live Tools and C axis, ideal for demanding and high-speed machining. Key features: - Model: UT200-M - Manufacturer: Accuway Machinery (Taiwan) - Year of manufacture: 2023 - Control unit: Fanuc Series 0i-TF Plus - Built-in manual guide for easier programming and simulation Machine specifications: - Maximum turning diameter: 260 mm - Maximum turning length: 470 mm - Workpiece diameter over bed: 505 mm - Workpiece diameter over carriage: 318 mm - Number of tool positions in turret: 12 - Spindle speed range: 6000 / 4500 / 4000 / 3500 rpm Gjdpfx Afjytpbpousbu - Tailstock diameter: 75 mm - Tailstock taper: MT#4 Dimensions and weight: - Length: 2.9 m - Width: 1.6 m - Height: 1.9 m - Weight: 3,600 kg Included accessories: - 8 tool holders (5 for external turning, 3 for internal turning) - Chip conveyor - Chip collection cart - Signal tower (red/yellow/green lights) – real-time machine status - Manual guide – for easy manual programming and path verification The machine was bought new in August 2024, has seen very minimal use compared to its full potential, and is immediately ready for operation. For any further information regarding condition, price negotiations, technical details or to arrange a viewing, feel free to contact me via message or phone.

Condition: used, Year of construction: 2006, Overview This Kematec MBK 12 AS, built in 2006, places shrink capsules on wine bottles and shrinks them on in 12 heating stations. It runs at 3,000 - 12,000 bottles per hour and covers bottle heights of 235 - 360 mm and bottle diameters of 50 - 115 mm. The machine is still installed in a wine bottling line and can be inspected on site. Technical data - Manufacturer: Kematec - Model: MBK 12 AS - Year of manufacture: 2006 - Machine type: capsule placing and shrinking machine - Output: 3,000 - 12,000 bottles/h - Capsules: shrink capsules, max. length 80 mm, max. diameter 40 mm - Head diameter: 33 mm - Heating stations: 12 - Capsule magazine: 1,800 capsules - Bottle height: 235 - 360 mm - Bottle diameter: 50 - 115 mm - Working height: 1,100 mm (+/- 50 mm) - Direction of travel: left to right Gbedpfez Hbzksx Afuju - Power supply: 400 V, 50 Hz; main drive 0.75 kW - Compressed air: 6 - 7 bar, approx. 350 l/min - Overall dimensions (L x W x H): 3,700 x 2,500 x 2,580 mm - Weight: approx. 1,400 kg Equipment - Capsule magazine with multi-level storage shelves and capsule feed - Rotary capsule placing turret - Rotary shrinking turret with 12 heating stations - Bottle infeed and outfeed on slat chain conveyor with guide rails - Siemens touch panel (French, Dutch, German) with fault list, emergency stop and signal tower - Control cabinet with PLC - Stainless steel frame, enclosure with transparent guard doors - CE marked; operating manual with spare parts list available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,000 h, travel distance X-axis: 1,140 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, controller manufacturer: MITSUBISHI, controller model: M720 SSS, table load: 850 kg, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine. Additional equipment • Air blast through spindle • Rotary table with counter-support and hydraulic lock – 360° rotation • Heidenhain linear scales on X, Y, Z axes; rotary encoders on A and C axes • Coolant through spindle, 20 bar + low-pressure cooling system • Renishaw OMP60 workpiece probe + receiver // Renishaw TS27R tool probe • Chip flushing system • Chain-type chip conveyor • Telescopic covers for X, Y, Z axes • Full machine enclosure with safety door lock • Central lubrication system with oil cooler Machine Benefits Qualitative Machine Benefits Gbedpfxez Ea Sxe Afuju • Condition: very good, low operating hours • Ready for tests Technical Machine Benefits • B-axis (tilting head): –120° to +120° • C-axis (rotary table): 360° continuous rotation • 24-position drum-type tool magazine • Table size: 1300 × 610 mm Extra Information Additional equipment Work area lighting Signal tower Air and coolant guns MPG handwheel Electrical cabinet cooling with air conditioner Temperature control system for spindle and ball screws Coolant oil separator Maintenance tool set

Condition: used, machine/vehicle number: 91671431, Year of construction: 2022, operating hours: 423 h, load capacity: 7,000 kg, empty load weight: 1,500 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Traction force: 7,000 kg MACHINE DETAILS Battery voltage: 48 V Battery capacity: 375 Ah Battery type: 3 PzS Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 2,200 mm Own weight: 1,500 kg Service valid until: 09/2027 UVV (accident prevention regulations) valid until: 09/2027 Operating hours: 423 h EQUIPMENT Cabin Windshield wiper White, non-marking tires Road approval lighting with turn signals, compliant with StVZO (German Road Traffic Licensing Regulations) Safety light at the front formerly a Jungheinrich full-service unit All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Gedpfx Ajz Iwv Tefuobu Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 388

Condition: ready for operation (used), Year of construction: 2021, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information. MasterCut Compact 3001.15P/Me Approx. 3,000 x 1,500 mm Sturdy construction Up to 100 mm material thickness High-quality linear guides and backlash-free drive on both sides Digital, maintenance-free AC servos with IRC Up to 40,000 mm/min IRC 2500 (incremental encoder) • Permissible plate thickness: stable construction up to 100 mm material thickness • Guides/Drives: high-quality linear guides and double-sided clearance-free drive • Axis control: digital, maintenance-free AC servos with IRC Gedpfxjycvq Ae Afujbu • Positioning speed: up to 40,000 mm/min • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic Core gas console • Table surface: grid cover in the cutting table • Height control: "THC" module for automatic height regulation via arc voltage • Marking unit: "MicroPunch" needle marking unit • Safety features: double-sided rope safety system (collision protection) for the gantry via Emergency Stop • Visual signaling: 2-color LED signal tower on the gantry bridge • Operation interface: externally standing MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 710 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 210 mm, spindle speed (max.): 20,000 rpm, number of axes: 3, This 3-axis ISEL FlatCom M30 DoppelFlat 75-35 was manufactured in 2016. It features a complete sound-insulated safety enclosure with sliding viewing doors and a swivel-mounted CNC control console. The machine is equipped with a top-mounted multi-port suction hood and integrated pneumatic pressure regulators. If you are looking to get high-quality milling capabilities, consider the ISEL FlatCom M30 DoppelFlat 75-35 gantry milling machine we have for sale. Contact us for further details. • Machine Type: CNC Gantry Milling (Double Flat / Twin Table Station) • Enclosure: Complete sound-insulated safety enclosure with sliding viewing doors • Control Unit: Swivel-mounted CNC control console with monitor, keyboard, touchpad, status indicator lights, and key switch • Operator Controls: Standalone two-hand safety control pedestal equipped with palm switches and emergency stop button Gbedpfx Aszu Rtusfuju • Extraction System: Top-mounted multi-port suction hoods with 4 flexible extraction hoses • Cooling & Climate Control: Cabinet-mounted enclosure air conditioning/cooling units • Pneumatic System: Integrated pneumatic pressure regulators, air filtration assembly, manifold block, and coiled hose connection • Safety Equipment: Red/Green signal tower light mounted on the frame

Condition: used, Year of construction: 2015, operating hours: 2,500 h, On behalf of our client, we are selling a fully equipped and ready-to-use top-slewing tower crane. * Siemens Simatic/Sinamics HMI touch system * Tagline Master (2.2 tons) * CE certified * Self-erecting * Enclosed operator cabin with elevator * Electric with generator (in container) * Radio remote control * Emergency descent * Hydraulic unit * Hydraulic lifting cylinder * Intermediate platforms * Base plates * Spare parts container * Tool container ----* Jib length: max. 68.5 m * Load capacity up to max. 125 tons * Top-slewing cages, each 7.8 m * Year of manufacture: 2015 * Operating hours: 2500 hours ----NACELLE: Diameter: ¢4800, Clearance: 3500 mm, Height: 4937 mm ----FORCES AT GROUND LEVEL * Base forces: 1670 m (1098 m mast) * In operation: Wind speed 15 m/s * Out of operation: Wind speed 40 m/s ----Moments and forces: M (kNm): 27850 (in operation), 26800 (out of operation) * N (kN): 6580 (in operation), 5130 (out of operation) * a (kN): 120 (in operation), 410 (out of operation) * T (kNm): 800 (in operation), 0 (out of operation) * Deflection, mast (m): 1.500 (in operation), 0.850 (out of operation) * Mast inclination (degrees): 1.100 (in operation), 0.500 (out of operation) * Corner load (kN): 3000 (in operation), 2500 (out of operation) Gbjdpfoz D Ru Isx Afuou ----Errors and prior sale excepted.

Year of construction: 2017, condition: excellent (used), machine/vehicle number: DN-SS-250-1000A, Telemecanique / Schneider Canalis KSA - Busbar System Type KSA, 5-pole - L1 L2 L3 N PE Current stock: 250A - approx. 100m 400A - approx. 400m 630A - approx. 60m 1000A - approx. 110m Voltage Ui max. 690V, Frequency 50 - 60 Hz Busbar lengths available, predominantly 5m and 3m Gbsdez E Dchjpfx Afueu Price per meter from 125 Euros incl. connectors and supports Feeder boxes, end pieces, and tap-off boxes 16-32-63A are available as optional extras (Other tap-off boxes 125 - 160 - 250 - 400A available upon request) The dismantling was carried out by a qualified electrician. Busbars are in TOP condition!!!! Please inquire about the desired lengths or accessories! In stock, immediately available!!! We also have the Kloeckner Moeller BD1 system in stock! (Busbars, corner pieces, feeders, and tap-off boxes) Please inquire! Are you also looking for a crane system?

Condition: good (used), Year of construction: 2014, functionality: unexamined, machine/vehicle number: 68235-1411-265, overall weight: 1,600 kg, total height: 2,850 mm, total length: 1,415 mm, total width: 1,415 mm, space requirement height: 3,200 mm, type of input current: AC, Equipment: type plate available, We are offering this used Lang Technik Eco Tower 60 automation system, manufactured in 2014. Year of manufacture: 11.2014 Serial number: 68235-1411-265 Type: Eco Tower 60 Article number: 68235 in good used condition, consisting of: 1 ECO FEED component placement machine, manufactured in 2014 1 ECO TOWER 60 component placement tower, manufactured in 2014 40 Eco Grip vises, size 77, base body made of steel 20 Eco Grip vises, size 77, base body made of aluminum 4 Eco Grip vises, size 125 1 Vise carriage 1 LANG Quick-Point clamping tower 1 Pneumatic interface between handling system and clamping tower 1 Operating manual and installation guide The automation system is available immediately! Inspection is possible at any time! Gbodpjzvc Rhefx Afuou If you have any questions or require further information, please feel free to send us a message or call us.