Used Thermal Transfer Printing System + Punch for sale (47,026)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers Ndjdpjzvcknefx Agreb • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Ndedpsxy R Ezofx Agrjb

Condition: excellent (used), Mettler Toledo Model: TGA/DSC 3+ Mettler Toledo TGA/DSC 3+ HT Thermoanalysis System + GC401 + XP5U + Huber Ministat – incl. STAR Software & Dongle For sale is a complete, fully operational thermoanalysis system from Mettler Toledo in high-temperature configuration (up to approx. 1600 °C), including software license (STARᵉ) with hardware lock (dongle). System configuration: - TGA/DSC 3+ (combined thermogravimetry + DSC) - High-temperature furnace (HT, up to approx. 1600 °C) - Sensor: FRS2 SDTA - Gas controller: GC 401 - Microbalance: XP5U - Temperature control system: Huber Ministat 230-MT (Pilot ONE) - Software: STARᵉ Software Version 16.00b - License: Hardware lock (USB dongle, green) Software & license: Included in delivery: - STARᵉ Software (Version 16.00b) - Original hardware lock (USB dongle) Functions: - Thermogravimetry (TGA) – Mass change (µg range) - DSC / SDTA – Heat flow measurement (mW range) - Temperature analyses up to high-temperature range - Measurements under defined gas atmosphere Technical data (excerpt): - Temperature range: RT up to approx. 1600 °C - Heating rate: typically 10 K/min - Gas flow: Air: 30 ml/min Nitrogen: 20 ml/min - Temperature accuracy: Indium: ±1.5 °C Aluminum: ±2.5 °C Gold: ±3.0 °C Palladium: ±4.0 °C - Weighing accuracy: 1 g: ±50 µg 5 g: ±250 µg Temperature control unit Huber Ministat 230-MT: - Temperature range: -40 °C to +200 °C Njdpfsyxcqvjx Agrjdb - Voltage: 230 V - Power consumption: max. 11 A Dimensions & weight: - Total weight: approx. 100–150 kg - Multi-component system (laboratory equipment) Scope of delivery: - Complete TGA/DSC system - High-temperature furnace - GC 401 gas controller - XP5U balance - Huber Ministat 230-MT - STARᵉ Software incl. USB dongle - Documentation and accessories as shown in the photos Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors!) For further inquiries, please feel free to contact us by phone.

Condition: used, This listing is for a Woosim System Porti-S Data Printer. The unit is in full working condition and is ready for immediate release. Elevate your mobile printing experience with the compact and versatile Woosim System Porti-S. Designed for efficiency and portability, these printers are perfect for on-the-go applications in libraries, utility billing, law enforcement, and more. Key Features: - Compact Design: Lightweight and portable, ideal for mobile use. - Direct Thermal Printing: Clear, high-quality prints without the need for ink or toner. - Clamshell Easy Load Mechanism: Effortlessly load paper rolls—no mess, no hassle. - Tear Bar Cutting System: Quick and simple cutting of printed receipts or labels. - Versatile Connectivity: Compatible with RS232-based systems and equipped with Bluetooth for seamless wireless printing. - Software Compatibility: New range maintains compatibility with previous Porti series models, ensuring an easy transition for existing users. Specifications: - Print Width: Up to 80mm - Print Speed: Up to 100mm/sec for efficient, fast output - Battery Life: Long-lasting battery designed for extensive mobile use - Interface Options: RS232, Bluetooth, and USB (depending on the model) - Paper Type: Direct thermal paper (compatible with various roll sizes) - Paper Specifications: 57mm wide, 30 or 40mm diameter (available in boxes of 20 rolls) - MaxStick linerless label roll compatibility Applications: Ndjdpsxxx Stsfx Agrsb - Ultra-compact, mobile printers are ready to go anywhere to provide truly portable receipting or ticketing. The Porti-S series can work with RS232-based systems, but most applications utilize Bluetooth for wireless connectivity. They're compatible with many PDAs, smartphones, and laptop PCs.

Condition: ready for operation (used), Year of construction: 2006, A complete screen and gravure printing system for paper and non-woven wallpapers is available. Output: 15000 rolls/24h, substrates: paper: 80g-150g/m², non-woven: 50g-150g/m², printing width: 1060mm, working width: 1200mm, printing speed: 5m-150m/min. Components: Preconditioning, gravure printing unit, 5x screen printing units, 2x screen gravure printing units, 5x intermediate dryers (standard version), 2x intermediate dryers (1.5 times dryer height), 1x main channel with 6x 4m zones, roller/unwinder, register embossing, double-head printing units. Including various peripheral devices and units. Total dimensions X/Y/Z: approx. 60m/8m/6m. Documentation available. On-site inspection is possible. Nedpfxst Rkate Agrodb

Condition: like new (used), Year of construction: 2019, Mossini Transfer Press PDM/4BLD Pressing force: 2,000 kN Table area: 6,000 x 2,500 mm Slide area: 6,000 x 2,500 mm Stroke height: 900 mm Strokes per minute: 10 - 25 1/min Slide adjustment: 400 mm Overall height: 1,270 mm TOTAL STROKES: 1,000,000 strokes NORDA Transfer Ndsdpfez Dw U Usx Agrsb X-axis travel: 0 - 1,200 mm Y-axis travel: 0 - 1,125 mm Z-axis travel: 350 mm Max. transport weight: 200 kg Mill tool strip system Strip width max. up to 1,850 mm Strip thickness: 0.5 - 3.0 mm Coil load capacity: 24,000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, total length: 1,250 mm, total height: 1,900 mm, total width: 2,000 mm, overall weight: 1,850 kg, No minimum price – guaranteed sale to the highest bidder! Lease return due to factory closure. Machine for the automatic and precise separation or singulation of printed circuit boards from a PCB panel. MACHINE DETAILS New price 2024: €149,000.00 net Processed printed circuit boards: 42,680 pieces Dimensions of pallet (L x W x H): 1,250 x 2,000 x 1,900 mm Machine weight: approx. 1,850 kg EQUIPMENT Cutter diameter control Wear parts package DIVISIO Automatic transport width adjustment SMEMA transport height Separation module, shank cutter 500 W Hardware module, camera Software module, teach function for camera Software module, fiducial mark recognition Extension, 8-position tool changer Extraction hose, manual Monitoring of suction power ASYCAM CAD data conversion A Adrep Offset main switch ESD energy chains and P-hoses, standard Packaging size, group 3 pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. • The sale is made without any guarantee or warranty. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends. Ndedszvb I Ejpfx Agrjb

Condition: ready for operation (used), Year of construction: 2016, A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 201482Y, year of construction: 1989. 12) Inclined conveyor belt, working width: approx. 1000mm, length: approx. 3000mm. 13) Centralized supply and exhaust air unit SitVerba, year of construction: 2016, supply air fans: 7, exhaust air fan: 1. The entire system was equipped with new direct drives, drive control, system control, control cabinets, piping construction, process air technology, etc. and completely overhauled in 2016. Documentation available. On-site inspection is possible. Nedpfx Agswqqv Dorsdb

Condition: excellent (used), Here, we offer you a TOX full-punch riveting system. TOX full-punch riveting system, type TZ-VSN. The full-punch rivet first severs all joining partners and then punches the rivet button out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, expands its range of products and services with a forward-looking process. Full-punch riveting provides an additional mechanical sheet metal connection, which is of great importance for lightweight constructions and the joining of hybrid parts and assemblies. The rivet feeders, clamp and tool holders are also designed to be universal, so that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand clamps and TOX robot clamps. Type TZ-VSN Press force 55 kN Total stroke 140 mm Rivet type: diameter 5x4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Type: TZ-VSN Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) Nedpszdn S Tofx Agrjdb We would be happy to answer any further questions you may have by telephone. Written orders can be placed by email or fax.

Condition: excellent (used), Here, we offer you a TOX full-punch riveting system. TOX full-punch riveting system, type TZ-VSN. The full-punch rivet first severs all joining partners and then punches the rivet button out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, expands its range of products and services with a forward-looking process. Full-punch riveting provides an additional mechanical sheet metal connection, which is of great importance for lightweight constructions and the joining of hybrid parts and assemblies. The rivet feeders, clamp and tool holders are also designed to be universal, so that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand clamps and TOX robot clamps. Type TZ-VSN Press force 55 kN Total stroke 140 mm Rivet type: diameter 5x4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Nsdpozdtffefx Agrodb Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Type: TZ-VSN Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by telephone. Written orders can be placed by email or fax.

Condition: used, This listing is for Applied Biosystems Verity 96-Well 9903 Thermal Cycler The unit is in full working condition and ready for immediate use This premium PCR system features VeriFlex technology for precise temperature optimization across six independent zones. It provides an intuitive touchscreen interface for easy protocol programming and delivers reliable, high-throughput DNA amplification for demanding laboratory environments. [[1](), Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Ndedpfx Agezf Nfderjb Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: excellent (used), REF: MM5767 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Ndjdpfx Aeulc Sqogreb Manufacturer - Adpak Machinery Systems Ltd Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies.

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Nodpfx Agov Si Szerodb Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: like new (used), Year of construction: 2023, functionality: fully functional, paper width (min.): 2,100 mm, paper height (max.): 120 mm, total length: 3,300 mm, total width: 3,500 mm, total height: 2,100 mm, Bürkle LFC 2100 Liquid Coating System Object: For liquid coating of digitally printed media. Suitable for applying primers or protective coatings, as well as for the full-surface finishing of digitally printed media in a continuous process using solvent-free UV coatings and direct coating curing using UV radiation from above. Condition: Like new (date of purchase 2023) Availability: Immediately Brief Description For sale is a high-performance coating system from Bürkle, model LFC 2100. The machine was acquired from the company Welte in 2023 and has only been in operation for a few hours since then. It is in excellent optical and technical condition (demonstration condition) and offers a first-class solution for UV finishing of large-format prints. The machine also includes a cleaning or washing unit with extraction, as well as a second roller (smooth roller). Technical Data & Highlights Maximum working width: 2,100 mm Substrate thickness: Flexibly adjustable up to 80 mm Throughput speed: Continuously adjustable (up to 25 m/min) Drying: Includes a powerful UV drying unit (TRUV) for immediate further processing Control: Modern control panel for precise process control Asking price Nodpfxsy Szwuo Agrsdb €150,000 (negotiable) plus VAT | ex works (EXW) Contact & Inspection The system is still assembled and can be inspected and tested on site after prior appointment. (Location: St. Martin bei Lofer, Austria)

Year of construction: 2018, condition: used, functionality: fully functional, Pneumatic transfer press carousel with 8 work plates, each 500 x 400 mm, also including sleeve plates and children's plates. Nodpeyhmyfofx Agrodb

Condition: used, Year of construction: 2000, MANZONI Transfer Press Type: T6302MR/2/12/TE, Year of manufacture: 2000 Pressing force: 6,300 kN Stroke rate: 10-45 1/min Stroke: 600 mm Ram adjustment: 200 mm Table area: 4,100 x 1,700 mm Ram area: 4,000 x 1,700 mm Installation height: 1,100 mm Control system: SIEMENS S7 Transfer distance: 0-800 mm Opening/closing distance per slide: 150 mm Lifting stroke: 150 mm Distance between gripper slides in the closed position: 500-1000 mm Ndjdpfx Agez Dxiajrjb PBK strip feeding system Strip thickness: 0.2 - 3.5 mm Strip width: 120 - 1,200 mm Coil capacity: 10,000 kg

Year of construction: 2011, condition: excellent (used), Wölco Lupo VPAB-53 labelling machine  Fully automatic labelling machine for professional labelling Wide-belt multi-labeler Manufacturer: Wölco Machine. Type: Lupo VPAB-53 Year 2011 Connection: 400V Current 3 x 16 A Power: 2,5 kW Air: 6 bar Wide-belt multi-labeler Wölco Lupo VPAB-36 Manufacturer: Wölco Machine. Type: Lupo VPAB-36 year 2011 Connection: 400V The Lupo VPAB-36 is the ideal machine for permanent industrial operation, if precise and variable label printing with position-accurate application is required. Sato printer S84 ex label printing system Ndodjh N Sa Repfx Agreb The SATO S84-ex/S86-ex printer is a very powerful, automated label printing system with a user-friendly design and a wide range of functions. This printer with its solid design is designed for continuous operation. The main functional features of the printer are: - Two-colour LCD backlight and two-colour status LED for optimised print status monitoring. - Solid design for harsh environments - Very fast print throughput with a maximum print speed of 16 ips and adjustable retract speed control - Printhead can be easily replaced without tools - Newly developed sensor cover with a non-stick surface that can be easily removed and cleaned without tools - Easy upload/download to/from SD card or USB memory and without using the SATO "All In One Tool" application - Supports external printer settings via the SATO "All In One Tool" application or a web browser - Supports multi-language display menu and Asian font printing - Supports emulation in standard firmware - Supports various communication interfaces - Supports SNTP protocol Financing through our bank is also possible. komplett-konzept.leasingo.de More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2021, This PREMETEC universal stamping and riveting machine will be auctioned off online in our industrial auction / machine auction follow-up auction, J&S GmbH Automotive Technology - Machine Park. Njdpfxozyf A Is Agrjdb You can find this and many other items on our platform.

Condition: used, Year of construction: 1991, Technical details: operating pressure: 160 bar distance between columns: 2000 mm throat: 1000 mm operating pressure: pneum. min/max 6/8 bar operating pressure: hydr. min/max 160/210 bar voltage: 380/50 V /Hz table surface area: 1900x1000 mm height over floor: 1000 mm tool clamping area: 1600x350 mm quantity of oil : 400 l total power requirement: 25,0 kW weight of the machine ca.: 7,1 t dimensions electric cabinet LxWxH: 1,0x0,3x1,4 m dimension machine xH: ca. L:2,2xB:3,4xH:2,2 m Nsdpfsu Icxdjx Agrjdb CLIP PUNCHING DEVICE or CUTTING PRESS or CLIP PRESS hydraulic - There are two machines on sale! - type of machine: folded punching device The machine has been used to punch holes in dashboards of cars. (incl. upper and lower tool) On the table are mounted the material intake and the sliding unit for the cut and hole punching. equipment: - light curtain - hydraulic pack - electric cabinet - control panel - workpiece counter - manual- and automatic operation possible - emergency stop On sale as is. i.D. *

Condition: like new (used), Year of construction: 2024, For sale: 8-colour offset printing press RMGT 970PF-8, configuration 8/0 or 4/4, with convertible perfecting unit. The machine is designed for high-quality industrial printing and is equipped with an extensive range of automation systems, including presetting, register control, cleaning systems, and colour measurement. Main technical specifications: Maximum paper size: 650 × 965 mm Minimum sheet size: 290 × 410 mm Minimum sheet size in perfecting mode: 370 × 410 mm Maximum printing area: 640 × 930 mm Maximum printing area in perfecting mode: 630 × 930 mm Maximum printing speed: 15,000 sheets/hour Stock thickness: 0.04–0.5 mm Plate size: 700 × 945 × 0.30 mm Feeder pile capacity: 1,100 mm Delivery pile capacity: 1,100 mm Machine dimensions L × W × H: 12,960 × 3,453 × 2,011 mm Equipment and features: PCS-G Printing Control System Rotary stream feeder Static eliminator on delivery Mechanical double-sheet detector Vacuum suction-type feeder board Paper size preset system Registration device Vertical and lateral image micro-adjustment Ultrasonic double-sheet detector Slewed sheet detector Side lay detector Front-lay Bernoulli device Side lay preset Printing, inking and dampening units: Straight edge plate clamp with positioning pins Infed lower swing gripper feed drum Gripper margin: 10 mm Remote control for vertical, lateral and diagonal register 19 inking rollers, including form rollers 4 dampening rollers R-matic dampening system Oscillating bridge roller Double-double-single perfecting cylinder configuration Delivery section: Static eliminator Chain gripper delivery Delivery jam detector De-curler device Board insertion device Powder sprayer High pile delivery Delivery area sensor Paper size preset system Paper guide under the first delivery drum Delivery belt guide Belt-type vacuum slow-down wheels Additional options: Automatic feeder pile lateral alignment function Blower guide under the swing Pneumatic pull side guide Feeder air preset Impression pressure preset Impression cylinder cleaning function Feed drum fan-out adjustment mechanism Automatic blanket cleaning device Automatic ink roller cleaning device Smart-FPC plate changing device Ink form rollers 1st–3rd oscillating Hollow rollers for ink roller temperature control system Ndodjy S S Azopfx Agreb R-matic_D remote ON/OFF Technotrans alpha.c chiller with alcohol density control Photo-type delivery pile lowering sensor Delivery fan antistatic eliminator PPC Server III for CIP-4 file transfer Press information display LithoFlash® Inline RMGT 970 Recto Verso automatic inline measurement system LithoFlash software package: LithoDyn ADR, LithoDyn JobChange, LithoFlash OneShot Machine raised by 200 mm The machine has CE marking, safety covers, tools, and documentation in English. The machine is sold in its current condition and at its current location — “as is, where is”. Inspection is possible by prior arrangement. An excellent solution for printing companies requiring a modern, high-performance 8-colour offset press with 8/0 and 4/4 printing capability and advanced process automation.

Year of construction: 2009, condition: used, This listing is for 2009 Applied Biosystems 2720 Thermal Cycler The unit is in full working condition and ready for immediate use This thermal cycler is a high-quality lab instrument manufactured by Applied Biosystems (Model: 2720 Thermal Cycler). A proven and robust PCR workhorse delivering precise thermal control for dependable DNA amplification. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Njdpozqf Nvofx Agrsdb Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2017, condition: ready for operation (used), The Trans-Blot Turbo transfer system combines traditional blotting techniques with modern filter paper and buffers, allowing rapid transfer of proteins from gels to membranes with minimal preparation time. The system integrates a high amperage power supply that directs current between a built-in platinized titanium anode and a stainless steel cathode. This enables highly efficient and rapid transfer in as little as 3 minutes. The entire system is in a ready-to-use format that allows researchers to obtain their results faster and easier, with reproducibility that is difficult to achieve using traditional blotting methods. Rapid transfer — transfers mini or midi gels in as little as 3 min Ndedpfx Agoy D D Rhorjb High throughput — can transfer 1–4 mini or 1–2 midi gels in a single run Greater transfer efficiency — higher transfer efficiency compared to other transfer methods Flexible design — allows user to customize transfer conditions and is compatible with traditional semi-dry consumables Environmentally friendly — environmentally safe consumables eliminate disposal cost Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 1998, machine/vehicle number: 1941, Vollautomatische Hochleisungsstanze - Fully Automatic Punching System Kugler 340-2RBaujahr / Year 1998 - Serial-No. 1941-340-2R Arbeitsbreite / Working width max. 340mm Format / Sizes min. 120 x 105mm Format / Sizes max. 340 x 340mm Stanzstärke / Punching thickness max. 3mm Mechanische Taktleistung pro Minute / Mechanical cycles per minute 80-100 Cycles Anlegesystem für kontinuierliches Arbeiten / Paper feeding for continuous running Kastenauslage mit Rüttler / Paper output with Jogger Inkl. Handbücher / Incl. Manuals Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Nodeiypk Sopfx Agrodb Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11105234, TECHNICAL DETAILS Maximum load capacity: approx. 37 kg Rated load capacity: approx. 30 kg Maximum reach: approx. 2101 mm Position repeatability: 0.05 mm (ISO 9283) Number of axes: 6 Operating ambient temperature: 0 °C - 55 °C (273 K to 328 K) Ambient temperature for storage & transport: -40 °C - 60 °C (233 K to 333 K) Positioner Model: KUKA DKP400 V2 Two-Axis Positioner Electrically insulated faceplate Air chiller Model: Thermo Chiller HRS050-AF-20 MACHINE DETAILS Drive Model: Meltio Engine V2.0 Power: 7.5 kW Frequency: 50/60 Hz Full load current: 22 A 3W + N + PE, 200-240 / 380-415 V, 16A 3W + PE, 200-240 V, 25 A 2W + PE, 200-240 V, 40 A Control Model: KR C5-2, KR C5 Integrated software: Melito Engine Dual Wire & Melito Engine Hot Wire Protection rating: IP65 (IEC 60529) Wrist protection rating: IP65 / IP67 (IEC 60529) Ndodpfx Agsyvzuhoreb Dimensions Overall dimensions (L x W x H): 5,000 x 4,000 x 4,000 mm Sliding door opening dimensions: 2,000 x 3,000 mm EQUIPMENT Laser safety cabin, lightproof 4 controllers in one system Roof closed and removable Note: Images 1 & 2 show the assembled state at the previous operator.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, We have a Kirk-Rudy Firejet C4 inkjetsytem full colour KR519 year 2021 available. Complete with feeder, alignmenttable, mailbase and conveyor. Ndodpfozwlbrox Agrsb This machine has not been used much so now for you a chance to buy a almost new one for a used price!