Used Tom Chandley Compacta for sale (3,781)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 18,955 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 203 mm, travel distance Y-axis: 82 mm, travel distance Z-axis: 585 mm, spindle motor power: 15,000 W, total height: 1,852 mm, total width: 1,935 mm, overall weight: 6,000 kg, bar diameter (max.): 65 mm, controller manufacturer: FANUC, controller model: 0i-TF, product length (max.): 2,716 mm, number of slots in tool magazine: 12, number of axes: 4, This 4-axis NAKAMURA-TOME AS-200L was manufactured in 2017. It features a maximum turning diameter of 320 mm and a turning length of 570 mm. The machine includes a 12-station turret and a main spindle speed of up to 4500 rpm. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME AS-200L horizontal turning machine we have for sale. Contact us for further details. Standard Equipment • Turret: 12-station drum turret • CNC control, 4 axes (including C-axis), Fanuc 0i-TF • Anti-collision protection system (mechanical “Airbag”) • Y-axis Kjdpfxjytqpns Aktsdl • 15″ LCD monitor with USB port • Live tooling – 12 positions • Automatic central lubrication system • Machine working area lighting • Coolant pump – 180 W • Initial coolant filling (Blaser coolant)Options included • Transformer • Luck-Beil II (NT Manual Guide – graphical interface for control) • Increased spindle bore to 71 mm (4500 rpm; A2-6) • Upgraded main spindle motor Fanuc 15 / 11 kW (258 Nm) • High-pressure coolant system with Brinkmann pump • Shut-off valve for high-pressure coolant system • Low coolant level sensor • Part ejector cylinder from sub-spindle (cylinder stroke 100 mm) • Signal tower for machine status (3 colors) • Operator shelf under control panel • Type A parts catcher (Ø71 mm / L150 mm / 3 kg) • Preparation for LNS bar feeder • Air blow through main and sub spindle • Manual tool probe (Renishaw, one arm for both spindles) • Spindle cooling system for main and sub spindle • Preparation for oil mist extraction system Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2016, Automatic cutting table system for textiles and leather Manufacturer: Atom Type: FlashCut 2H 1660B UP Year of manufacture: 2016 CNC control Working area: 1,540 x 1,200 mm Cutting area: 1,540 x 600 mm Maximum cutting height: 20 mm Maximum traverse speed: 80 m/min Maximum acceleration: 1G Vacuum power: 1 – 8 kW Connected load: 5.5 kW 380 volts, 3 phases, 50 Hz Compressed air: 6 bar, 200 l/min when using pneumatic tool holder 9 bar, 400 l/min 2 independently operating multi-tool heads consisting of: Tool module for all tool holders Writing nib for applying markings 2 punch nozzles with different diameters Minimum diameter: 1 mm Maximum diameter: 8 mm one needle Circulating conveyor belt (transports the material into the working areas) Vacuum table: divided into squares of 300 x 300 mm High-performance vacuum turbine with Kdedpfx Aksyf Egxstjl frequency control up to 1 – 8 kW High-brightness projector Servo drive for the X, Y and Z axes Safety device with light curtain monitoring and emergency stop switch Machine dimensions: 2,210 x 2,506 x 1,841 mm Weight: 1,630 kg 19526

Condition: used, Year of construction: 1998, Lifting capacity: 70.000 kg Serial number: SC070-1318 Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 0 Transport dimensions (LxWxH): 0x3.18x3.12 Please contact PFEIFER GROUP for more information Kedpexwi R Rofx Aktjdl

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, A log turning (orientation) system for top-end-first positioning is available for sale. The system was in use for only a few years before the entire log infeed was removed. We also have additional components from the same log infeed available. Kodpowkdt Nofx Aktjdl

Condition: new, Catalog number: S0367 TECHNICAL DATA dimensions of the work table: 800x800mm motor power S1/S6: 3.0 / 4.4kW diameter of the hole in the table: 190mm spindle diameter: 30mm spindle tilt: 0° -45° spindle speed: 1400 / 3500 / 6000 / 8000rpm rotation: right, left vertical spindle travel: 175mm working height of the spindle: 125mm max. tool diameter for profiling / for tenon machining: 180/250mm diameter of the extraction nozzle: 120mm dimensions L/W/H: 2800x1800x1090mm weight: 410kg Kdodpfjy Tlqusx Aktjl – machine is new – tilting spindle – with side table Net price: 17200 PLN Net price: 4100 EUR, depending on an exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Kodpfxeuzn Nns Aktjdl Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Kdodpfx Aowypqlektjl Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: used, NAKAMURA-TOME NTRX 300 is a machining and turning center from bar, engineered for precision, high accuracy and reliable production. Main capacities: 6 axes (5 simultaneous), Z travel 1125 mm, X 700 mm, Y ±125 mm, B tilt 225°, C 360° resolution 0.001; workpieces up to 1100 mm length and Ø 640 mm; tool magazine 40 stations, tool Ø max 90 mm, tool length 300 mm. Technical specs: spindle nose Capto C6, main spindle up to 4500 rpm, milling spindle up to 8000 rpm, spindle motor 15/11 kW, rapid traverse 36 m/min, air 5–7 bar, 3x400 V 50 Hz, total power 65.1 kVA, weight ~18000 kg, footprint 4530×2670×2615 mm. Accessories: coolant system, paper filtration, toolholder set, milling cutters, drills, lamp, oil‑mist extractor, bar loader. Achieves tight tolerances; suited for automotive, aerospace, medical, watchmaking and machine‑tool sectors. Kdsdpey S A Rpefx Aktsl

Condition: used, Year of construction: 2011, cutting diameter 335 mm saw band length 4400 x 34 x 1,1 mm Ksdsy Sbkhspfx Aktedl table height 750 mm 550 mm 335 mm 550 x 335 mm 330 mm cutting speed 320 x 335 mm down speed 200 mm dimensions of saw-band 200 x 335 mm workpiece weight 15 - 150 m/min 3,0 kW work height max. 1500 kg connected load 2400 x 2200 x 1900 mm Equipment: - Automatic feed unit - Material end Light barrier - Clamping pressure regulation for automatic machines - Manual saw blade tension - Laser light for cutting line display/scoring saws - Water spray gun

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Kdjdpfoy Snkuox Aktjl Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Kedpfsy Su A Rox Aktodl

Condition: ready for operation (used), Otto Müller SR 30 High-speed radial drill Drill spindle holder (Morse): 40 mm Longitudinal displacement drill head (X-axis): 750 mm Arm travel height (Y-axis): 450 mm Spindle diameter: 70 mm Max drilling depth: 150 mm Speed: 2400 rpm Dimensions: 175x120x235cm (LxWxH) Power supply: 380v Without oil skimmer to the left of the machine in the picture Transport possible at more price. Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Otto Müller SR 30 Fast Radial Drill Drill spindle mount (morse): 40mm Longitudinal displacement drill head (X-axis): 750mm Height displacement arm (Y-axis): 450mm Spindle diameter: 70mm Max drilling depth: 150mm Speed: 2400 rpm Dimensions: 175x120x235cm (LxWxH) Power supply: 380v Without oil skimmer on the left of the machine in the photo Transport possible at an additional cost. Ksdjvilzgjpfx Aktodl Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have any redundant machines, please email them to us with photos and information. The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Otto Müller SR 30 Fast Radialbohrmaschine Bohrspindelaufnahme (Morse): 40mm Length of drilling head (X axis): 750 mm Armhöhenweg (Y axis): 450 mm Spindle diameter: 70 mm Maximum drilling depth: 150 mm Speed: 2400 U/min Abmessungen: 175x120x235cm (LxWxH) Power supply: 380 V Ohne Ölskimmer links neben der Maschine im foto Transport gegen Aufpreis möglich. Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Condition: ready for operation (used), Otto Müller SR 23 Fast Radial drill press Drill spindle adaption (morse): 30 mm Longitudinal displacement drill head (X-axis): 750 mm Arm stroke (Y-axis): 350 mm Spindle diameter: 55 mm Max drilling depth: 125 mm Speed: 2400 rpm Dimensions: 175x130x215cm (LxWxH) Power supply: 380v Completely new controls, ready to put to work. Transport possible at more price. See also our other ads Also throughout the year we are looking for industrial machines. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Otto Müller SR 23 Fast Radial Drill Drill spindle mount (morse): 30mm Longitudinal displacement drill head (X-axis): 750mm Height displacement arm (Y-axis): 350mm Spindle diameter: 55mm Max drilling depth: 125mm Speed: 2400 rpm Dimensions: 175x130x215cm (LxWxH) Power supply: 380v Completely new control, ready to put to work. Transport possible at an additional cost. Also view our other advertisements We are also looking for industrial machines all year round. If you have any redundant machines, please email them to us with photos and information. The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Otto Müller SR 23 Fast Radialbohrmaschine Bohrspindelaufnahme (Morse): 30mm Length of drilling head (X axis): 750 mm Armhöhenweg (Y axis): 350 mm Spindle diameter: 55 mm Maximum drilling depth: 125 mm Speed: 2400 U/min Abmessungen: 175x130x215cm (LxWxH) Power supply: 380 V Völlig neue Steuerung, sofort einsatzbereit. Transport gegen Aufpreis möglich. Ksdpevilzmsfx Aktjdl Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Log turner, infeed-outfeed conveyors, heavy duty construction Equipment from 2019 Kedpfx Aou N Ac Sjktodl

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells Kedjfy T Arepfx Aktjdl The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? Kdjdpfx Akjfz Ndystsl You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Kdedpfx Aofy T Szoktsl Prices are given in the catalog

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations Kdedpfx Aksfz I D Detjl The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Kjdpfx Aksflmdwstodl Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. Kodpfxeflrc So Aktedl There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2004, condition: used, Automatic bar feeder for diameters from 6 to 45 mm and a maximum bar length of 3,300 mm. CE compliant, complete with manuals and certification. Kjdpfx Akjww Hx Istedl

Condition: used, Year of construction: 2004, The used TOP AUTOMAZIONI X-FILES automatic bar feeder is a valid alternative to the more traditional bar pusher for performing unattended bar machining on production CNC lathes. Multilayer, year of manufacture 2004, CE compliant; Kjdpsx Nqi Iofx Aktsdl maximum bar diameter: 75mm maximum bar length: 3300mm

Condition: ready for operation (used), Year of construction: 2013, operating hours: 17,577 h, clamping force: 1,600 kN, total height: 2,060 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 11 Machine Benefits Technical Machine Benefits • Clamping unit: 160 / locking force: 1760 kn / opening stroke max: 495 mm / mould installation height, min: 275 mm / mould installation height, max: 585 mm • Platen distance, max: 1080 mm / mould mounting platens (h x v): 760 x 785 mm / clear column distance (h x v): 520 x 520 mm • Ejector travel: 125 mm / ejector force: 35 kn • Injection unit: 340 / screw diameter: 35 mm / l/d ratio: 20 / injection flow (ps) without accumulator: 288 cm³/s • Metering stroke: 162 mm / nozzle stroke, max: 350 mm / nozzle immersion depth (svo): 20 mm / nozzle contact pressure: 30 kn • Material hopper capacity: 35 l / injection speed, max. , standard: 300 mm/s / injection speed, max. , increased: 500 mm/s • Net weight without oil filling: 7300 kg Extra Information Electrical & Pneumatic Interfaces: Sockets: 2 x Schuko (1Ph, 230V, 10A)/ 2 x IECEE (3Ph, 400V, 16A) – switched off via main switch/ Additional Schuko socket also listed (same rating)/ Valves: 1 x Pneumatic 5/2 valve on movable platen (programmable)/ 2 x Pneumatic 5/2 valves on stationary platen (programmable)/ I/O: 3 digital inputs / 3 digital outputs (freely programmable)/ Terminal board outside control cabinet/ Air & Cooling: Central air supply and piping/ Cooling system: open cycle/ Cooling water controller: 4 circuits with temperature indication (max. 10 l/min per circuit)/ Separate water connection for cooling (mould + machine)/ Switch-off for mould cooling (time programmable)/ Machine Mechanical & Motion Features: Clamp and injection unit colours: Jet black (RAL9005): bed, pump station, lower control cabinet/ Signal white (RAL9003): clamp unit, injection unit, guards, covers, safety doors/ Mould platen layout: E-standard (similar to EUROMAP, March 1996)/ No side ejector platen/ Ejector: held in front position against spring-loaded mold ejector/ Standard mold height/ Standard closing speed/ Kdodpfx Aksx D Hnmotjl Only active movement when safety guard is closed/ Screw: wear-resistant, nitrided barrel, standard L:D, 35 mm diameter/ Non-return valve: 3-piece ring type/ Control, Programming & Monitoring: Inputs/outputs and clamp sequence: freely programmable/ Switching programs (e.g., dry cycle, startup scrap counter, timer-controlled cooling)/ Injection process: Injection force with max injection speed: 200 mm/s/ Back pressure programmable via 6-point polygon/ Follow-up pressure switch-over based on melt pressure/ Follow-up, back pressure, metering: closed-loop control/ Feed throat temp control: closed-loop, max 90°C ±9°C/ Reduced nozzle sealing force (programmable)/ Clamp force: closed-loop control/ Active mold protection: sensor-based during closing/ Hot runner control: 5 zones integrated (2.75 kW total) Display, Software & Data: Coloured data display PDA (Process Data Acquisition): 100% control with graphical parameter recording/ Overlaid graphs for multiple cycles/ External statistical data export/

Condition: ready for operation (used), Year of construction: 2019, operating hours: 25,500 h, clamping force: 10,000 kN, screw diameter: 110 mm, displacement volume: 3,136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Kjdjygk Eiopfx Aktsdl

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1.1 mm table height 750 mm feed 5.0 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 mm capacity 30 degrees: flat 170 x 335 mm 15 - 150 m/min workpiece weight max. 250 kg/m 3.0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system Kedpfx Akeulnb Detodl - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA