Used Tool Master 310 Measurement System for sale (66,070)

Condition: excellent (used), Year of construction: 2018, Model IM-7010, Model Year 2018 Type: Measuring Head Model with Transmitted and Reflected Light Image Sensor: B/W CMOS, 1", 6.6 megapixels Display: LCD Monitor, 10.4" (XGA: 1024 × 768) Lens System: Dual Telecentric Lens Image-based Measurement Measuring Range: - Standard Measuring Mode: 200 mm × 200 mm (4 × R50) - Precision Measuring Mode: 125 × 125 mm Display Resolution: 0.1 µm Repeatability (without stage movement): - Standard Measuring Mode: ±1 µm - Precision Measuring Mode: ±0.5 µm Repeatability (with stage movement): - Standard Measuring Mode: ±2 µm - Precision Measuring Mode: ±1.5 µm Measurement Accuracy (±2σ): - Without stage movement: - Standard Measuring Mode: ±5 µm*1 - Precision Measuring Mode: ±2 µm*2 - With stage movement: - Standard Measuring Mode: ±(7 + 0.02l) µm*3 - Precision Measuring Mode: ±(4 + 0.02l) µm*4 External Remote Input: Voltage-free input (with and without contact) External Output: I.O./N.G./FAIL/MEASUREMENT Photo-MOS Output: Rated load 24 V DC, 0.5 A, ON-resistance max. 50 mΩ Interfaces: - LAN: RJ-45 (10BASE-T/100BASE-TX/1000BASE-T) - USB 3.1: 4 ports (rear) - USB 2.0 Type A: 2 ports (front) Recording: 500GB Hard Drive Illumination System - Transmitted Light: Telecentric transmitted light illumination (green LED) Ring Illumination: Reflected light (ring light) with four segments Klodpfxeyc N Egj Afdsr XY Stage: Travel range 100 × 100 mm (motor-driven), max. load capacity 5 kg Z Axis: Travel range 75 mm (motor-driven) Power Supply: 100 to 240 V AC, 50/60 Hz, max. power consumption 430 VA Environmental Resistance: - Pollution Degree: 2 - Overvoltage Category: II - Ambient Temperature: +10 to +35 °C Relative Humidity: 20 to 80% RH (non-condensing) Weight: approx. 30 kg

Condition: excellent (used), functionality: fully functional, Ball bar interferometer including software Kodjyx Sqfopfx Afdelr

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: M-G1035, input voltage: 230 V, total width: 610 mm, total length: 1,290 mm, total height: 1,750 mm, overall weight: 600 kg, VIO 20|50 linear M-G1035: Microset tool presetter for drilling, milling, and turning tools Adjustment range Ø 420 mm, measuring length 500 mm (travel in X-axis up to 50 mm beyond spindle center possible) Fully equipped with: - Microvision VIO image processing system featuring: PC technology, 24" 10-point multi-touch monitor - Mega-pixel camera with telecentric lens and blue telecentric illumination - Field of view approx. 5.2 x 5.2 mm, full-image display - Display accuracy 0.001 mm, repeatability +/- 0.002 mm - Cutting edge quality control via live image display (edge inspection) - Measurement with fixed and floating crosshair - Intuitive user interface for shortest measuring cycles - Clear, user-friendly screen displays for highly ergonomic operation and workplace safety - Tool lists, job-related for potential data handover to the machine tool - Tool memory with image allocation as well as assignment of parameter and technology data - Password protection for multiple operators (user management) - Extensive functions for data backup and maintenance - Absolute, differential, and chain dimension display, radius/diameter switching - Interfaces: Ethernet, USB and RS232 - Linear drives in X and Z axis for maximum dynamics and positioning accuracy - Collision protection during motorized movements (minimum speed 180 mm/s) - Fast autofocus - Motorized spindle, 36 rpm - Precision via motorized fine positioning - Manual operation with CNC mode for X and Z axes (optimal operating comfort for positioning) - Heidenhain glass scales in X and Z axis - Rigid grey cast iron construction with torsion-resistant machine bed - Edge finder for quick alignment to tool cutting edges - Sturdy metal base cabinet, compressed air maintenance unit, calibration master - Power supply: 100 V - 115 V and 230 V - Power consumption: max. 1400 VA - Pressure: min. 6 bar - Air consumption: max. 10 liters per hour (depending on configuration and working cycles) Weight: up to 600 kg, dimensions without arm (W/D/H): approx. 610/1290/1750 mm M-A2063: Technology package VIO linear Control electronics PC system and 27" monitor 44x magnification of tool display 27" 10-point multi-touch monitor HD display resolution 1366 x 768 (16:9) ITX PC system, keyboard and mouse Machine feet with vibration damping Photo capture of tools with external camera via Microvision HQRID scanner QR code scanner for identification of tool holders / complete tools using a unique label, enabling measurement program selection. M-S1029: ISS - U universal ultra-precision spindle "autofocus" Motorized autofocus for precise tool focusing Runout accuracy at spindle: 0.002 mm Pneumatic, mechanical universal tool clamping ISS Up to 20 kN clamping force Mechanical adapter locking Pneumatic spindle brake Ksdpfsyw Sfyox Afdjlr 4 x 90°, 3 x 120° motorized indexing Automatic positioning to index positions Operator-independent tool clamping High adapter change accuracy Automatic adapter recognition At least one adapter is required for operation. Please select suitable ISS adapters. M-Y0200: Operating system Windows 10

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: DC, input voltage: 12 V, measuring range X-axis: 200 mm, measuring range Z-axis: 350 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 350 mm, input frequency: 50 Hz, Toolset 350 Tool Presetting Device in used, functional condition. Compact and precise measuring machine for the presetting and measurement of CNC tools. The machine features an optical measuring system with camera and digital display, enabling accurate tool measurement. Measurement is performed over the X and Z axes using digital measuring systems. The measuring range is approximately 200 mm on the X-axis and approximately 350 mm on the Z-axis. The measuring accuracy is about 0.005 mm, allowing for precise results in workshop and production environments. The machine is equipped with an ISO40 tool holder (interchangeable), making it ideal for use in CNC manufacturing, toolmaking, and metalworking applications. Klsdpfoyw Sf Tex Afder Electrical connection: 12 V DC Frequency: 50 / 60 Hz Features: • Optical camera system • Digital display with control panel • Reference holder for tool adapters • Interfaces for data transfer Areas of application: • Tool presetting for CNC machines • Tool measurement • Mechanical engineering • Metalworking Inspection by appointment possible. Sale as inspected.

Condition: excellent (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, type of input current: AC, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, Equipment: documentation/manual, We are selling a barely used Keyence IM-8020, purchased in February 2025, together with the IM Editor (IM-H3EE) and a CAD import (IM-H3C) dongle. This allows you to prepare measurement programs from CAD models on an offline computer and import them to the Keyence machine. This model also includes a light probe. Kledpfoyym Dpex Afdor The machine is in mint condition, fully functional, and has seen minimal use.

Condition: excellent (used), We offer you: 3D Manufacturing Measurement System Kjdow H Rb Sspfx Afdslr Manufacturer: Keyence Model: XM-5000 Technical Data: - Maximum measuring range: 2000 × 1200 × 1000 mm - Measuring accuracy: ±(7 + 9L/1000) µm - Repeatability: ±3 µm Accessories, pictured tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to prior sale, changes, and errors in technical data and specifications!

Condition: like new (used), Year of construction: 2019, operating hours: 27 h, functionality: fully functional, overall weight: 8 kg, number of axes: 6, For sale is a high-quality 8520-6 measuring arm from Hexagon. The device was newly purchased in 2019 and is in very well-maintained condition. Due to minimal usage, the measuring arm is now being offered for sale. Features & Scope of Delivery: • Measuring arm including stable base plate with mounting ring, offering a working volume of 2 m • Magnetic mounting plate for flexible installation • 3 mm ruby touch probe • 6 mm ruby touch probe • 15 mm steel touch probe • Calibration sphere (reference sphere for calibration) • Length standard • 2 rechargeable batteries including charger for mobile use • Sturdy transport case + separate accessory case • Hook wrench • Various additional accessories for immediate operation Software: • Quindos 7 basic license included • USB stick with RDS 5.2.0.8058 software and license key Kljdpoykrtcefx Afdsr Other: • Renishaw TP20 touch trigger probe kit Inspection appointments can be arranged on request. If you are interested or have any questions, please feel free to contact us.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: SP.10.93015388, The ARTEC Space Spider is a professional, handheld 3D scanner with ultra-high resolution, utilizing blue structured light technology. It is renowned for its accuracy and stable performance in varying environmental conditions, thanks to its advanced temperature stabilization system. The scanner has seen very little use and is in excellent condition. Included in the set are the original carrying case, battery pack in a protective pouch, original power supply and cables, as well as a calibration kit. The ARTEC Spider is an excellent complement to the ARTEC Eva. The Spider precisely scans fine details requiring high accuracy—tasks that the larger Eva scanner cannot handle as effectively. Scans from both devices can be merged, resulting in a large-scale, accurately digitized model with preserved fine details. Kjdpfx Afjykrlxodolr VAT invoice or bill of sale can be provided. Courier delivery is available after payment has been received by bank transfer. Personal collection is possible after bank transfer or upon cash payment at pickup. Price is negotiable—please inquire for details. We reply only to inquiries from European countries. Specification, key features: - Accuracy: up to 0.05 mm. - 3D resolution: up to 0.1 mm. - Texture resolution: 1.3 megapixels (Mpx). - Scanning speed: up to 7.5 frames per second (up to one million points per second processing rate). - Technology: Blue structured LED light, safe for humans and objects. - Tracking: Hybrid, geometry and color-based, no need for reference markers. - Weight: 0.85 kg, ensuring high mobility. - Compatibility: Works with Artec Studio software, allowing for data processing and export to popular CAD formats (e.g., STL, OBJ, PLY). - Mobility: Can be powered from the mains or an optional battery pack, enabling field operation without a permanent power supply.

Condition: excellent (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, warranty duration: 6 months, type of input current: AC, input voltage: 230 V, price is EX VAT new price is 46 000€, here you can save 22 000€ on a demo unit with extremely little use. Shining 3D FreeScan Trak Nova — Wireless, Marker‑Free Industrial 3D Scanner (very little used demo unit from official reseller) All‑in‑one, metrology‑grade system combining a large‑FOV tracker (UE Nova) with a high‑detail handheld laser scanner (TE Nova). Integrated Video Photogrammetry (VPG) enables marker‑free and fully wireless workflows, so you can capture big parts fast and then zoom in on fine features—ideal for inspection and reverse engineering on the shop floor or in the field. Highlights Wireless, marker‑free scanning via built‑in VPG (faster setup, stable volumetric accuracy) Two scanners in one: UE Nova for large areas + TE Nova for fine details (seamless data fusion) Large field of view for big components; agile in tight spaces Hot‑swappable batteries for uninterrupted work Metrology‑grade performance with traceable calibration Core Specs Point accuracy: up to 0.02 mm Volumetric accuracy: 0.062 mm (12 m³); with VPG: 0.046 + 0.012 mm/m Scan speed: up to 6.14 million pts/s Resolution: 0.01–10 mm Kedpfxsyr A Ute Afdjlr FOV: up to 2.6 × 2.2 m Working distances / DOF: TE Nova 170–550 mm (DOF 380 mm); UE Nova 800–3500 mm (DOF 2700 mm) Connectivity: Wireless or fiber‑optic wired Weights: TE Nova 1.2 kg, UE Nova 1.6 kg Typical battery life (wireless): ~2.5 h (TE) / ~1 h (UE) Certifications: CE, FCC, ROHS, WEEE, KC, FDA, UKCA, IP50, TELEC, TiSAX

Condition: new, Year of construction: 2015, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 57 mm, measuring range Y-axis: 41 mm, measuring range Z-axis: 30 mm, total width: 240 mm, total length: 330 mm, total height: 720 mm, HITEC - Measurement Technology QCM 570 Exhibition machine, absolutely as new, full warranty Year of manufacture: 2015 (RRP €27,000.00) - For highly precise, repeatable measurements of complex workpieces - Various telecentric lenses - Camera system: USB 3.0 / 5 megapixels - Automatic part program recognition M3 Software: - 23" touchscreen - With flexible probe library, tolerance and programming function - Optical display indicating Pass/Fail with trend display - CAD export Measuring range / Field of view: 57 x 42 mm Length measurement deviation: 4.5 µm + L/50 (L in mm) Camera system: USB 3.0 / 5 megapixels Incident light: 4-segment LED ring light Kljdpfxoyvur To Afdor Transmitted light: LED Height adjustment: 30 mm The measuring system can be inspected at any time at the Chemnitz location.

Condition: excellent (used), functionality: fully functional, Very good leak calibration device in a case. Ksdpfsxz R Apsx Afdslr

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, For sale is a Fischercope H100C XYp micro-/nano-hardness testing system by Helmut Fischer (year of manufacture: 2001). The device was last used in a laboratory, but is currently not fully functional and is therefore expressly sold as defective / for repair or as a source of spare parts. Known issues: - Table advance movement does not function correctly (the table is positioned under the measuring head, not under the microscope – precise measurement is currently not possible). Likely an electronic issue. - The measuring table moves independently to the left – possibly a joystick failure. - Indenter change does not work correctly (the probe does not move fully to the end stop). Therefore, the device is particularly suitable for: • Repair by individuals with electronics expertise • Sourcing of spare parts • Research / hobbyists Klodpfx Afoyu Nabsder The optical condition is good for its age.

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Kedpfxsyvv Tre Afdelr Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: #4C0N000333, type of input current: AC, total width: 449 mm, total length: 557 mm, total height: 614 mm, overall weight: 35 kg, Equipment: type plate available, Item description: Keyence IM-8030T measuring system Including measuring head, control unit, rotation unit IM-RU1, 3-jaw chuck, 2-jaw chuck, keyboard, mouse, manual, etc. Technical specifications will follow shortly. ----- Item condition: The item is in very good condition and can be inspected at any time by appointment. Safe transport is ensured as all original packaging materials are available. Klsdpfsyf H S Nex Afdor

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FTB-4PRO-S1-128G, type of input current: AC, input voltage: 230 V, Equipment: documentation/manual, type plate available, Features of the FTB-4 Pro: * Quad-core processor * 4 GB RAM * Windows 10 * Color touchscreen display Kledoydv Idepfx Afder * 1280 x 800 TFT * Diagonal: 256 mm (10.1 inches) * Internal memory: 128 GB (flash) * Rechargeable Li-ion batteries (optional) * Interfaces: o 1x RJ45 LAN 10/100/1000 Mbit/s o 2x USB 2.0 ports o 1x USB 3.0 port o 1x display port o 1x headphone/microphone jack * Dimensions (H x W x D): 199 mm x 333 mm x 170 mm * Weight (without batteries and modules): 4.6 kg * X-720C-Q1-QUAD-EI-EA – TK-y SM/MM OTDR module * EUI-95 * FTBX-882260-10G 10M to 100G Multi-Service Power Blazer test module * GIGE-Bundle – Option 100 Optical + GigE option * 10GIGE – enables the 10GigE LAN/WAN interface * OTN option pack * OTDR + intelligent Optical Link Mapper base software * iOLM Pro * FP435B-V2-APC – Wireless Analysis Digital Video Inspection Probe, MF Ready * FIPT-400-MF Automated Multi-Fiber Tip UPC for MPO * FID-31 R Fiber Identifier * Including transport case

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 226735, type of input current: AC, input voltage: 230 V, Equipment: type plate available, Qualification, commissioning and troubleshooting – intuitive, flexible, fast Ksdpfsygwayex Afdslr High data transfer rates of up to 10 Gbit/s Ethernet and new Power-over-Ethernet applications up to 90 W present entirely new challenges for structured cabling. The NetXpert XG2 offers comprehensive active and passive network testing up to 10 Gbit/s for the qualification, commissioning, and troubleshooting of copper and fiber optic cabling. Featuring the largest touch display in its device class, the NetXpert XG2 guarantees user-friendly operation and a clear presentation of results. At the same time, the NetXpert XG2 ensures maximum reliability of results thanks to the unique combination of up to four different testing methods for analyzing a data link. Flexible, scalable model range – upgradable from 1 to 10 Gbit/s The NetXpert XG2 and XG2-PLUS qualify twisted pair cabling from 1 to 10 Gbit/s. With their unique combination of four measurement methods, these devices verify whether your cabling can support interference-free Ethernet transmission up to 10 Gbit/s. The NetXpert XG2 is available in its base version from 1 Gbit/s and can be upgraded to 10 Gbit/s. The NetXpert XG2-PLUS comes fully equipped to also qualify fiber optic cabling up to 10 Gbit/s. SPECIFICATIONS – ALL VERSIONS Copper Interface 1 x Cat 6A RJ45, replaceable Fiber Interface 2 x SFP slot, 1 - 10 Gbit/s; (SFP modules to be ordered separately!) Length measurement technology TDR (Time Domain Reflectometry) and capacitive Cabling test and ID Up to 305 m Split-pair detection: 1 m to 305 m Length measurement: 0 to 457 m, ± (5%+30 cm) Distance to fault (short circuit): 0 to 200 m ± (5% + 1 m) Compatible with 8 pass-through test and up to 24 ID remote units (RJ45) (ID remote units only) Power over Ethernet (PoE) Tests according to IEEE 802.3af PoE (Type 1, max 15.4 W), IEEE 802.3at PoE+ (Type 2, 30 W) and 802.3bt PoE++ (Type 4, 90 W) Max. voltage Maximum voltage that can be applied to any two test inputs without damaging the tester: RJ-45: 60 VDC or 50 VAC Memory capacity Stores an unlimited number of cable or network tests per project with custom names Tone generator Tone frequencies: 730 Hz and 11.440 Hz Languages English, German, French, Spanish, Italian Battery Li-Ion, 7.2 VDC, 6.2 Ah / up to 4 hours (typical) External power supply 12VDC Permissible temperatures Operation: -10° to 60 °C Storage: -30° to 70 °C Permissible humidity 10% to 90%, non-condensing Housing Plastic injection-molded Display 7" TFT-LCD color display with capacitive touchscreen, 1024 x 600 resolution (WSVGA) Dimensions 245 x 177 x 73 mm (main unit) 130 x 177 x 55 mm (active remote) Weight with batteries 1.2 kg (main unit) 0.6 kg (active remote)

Condition: new, Year of construction: 2019, functionality: fully functional, type of input current: DC, Balancing system for tool holder TD 2009, new. Never used and stored under protection. Ksdpfx Afsycfrvjdslr

Condition: used, Year of construction: 2011, valve dimensional inspection * Kljdpfx Ajyrg E Asfdjr

Condition: like new (used), Year of construction: 2021, functionality: fully functional, System: • Hexagon Absolute Arm 8340, 7-Axis • RS6 Kit • CP-C Installed • Magnetic Base with Mounting Ring • Certified Length Standard – 1016mm (40 inch) • Leap Frog Kit Computer & Software: • Inspire Single Seat License • BendingStudio TUBE • BendingStudio CAD Wizard Klodpfxsymnvrs Afdsr

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 120 mm, measuring range Z-axis: 30 mm, overall weight: 70 kg, workpiece weight (max.): 100 kg, feed length X-axis: 120 mm, Equipment: type plate available, -Leasing option available!!!- ConturoMatic CV120 Contour Measuring Device – "Simply measure contours" - Sample parts for free measurement can gladly be sent within the agreed framework, online DEMO after coordination possible. Ask us about our leasing options – we are happy to refer you to our partner. ✅ Up to 30% declining-balance depreciation on movable assets* Klodpfxsq Nzd Nj Afder ✅ Applies to investments from July 2025* ✅ T&S products are fully eligible for funding* Contour measurement system with traverse unit and motorized Z-column Scope of delivery: - CV120 motorized traverse unit with precision guide - External control and regulation unit - Motorized Z-column - Evaluation PC Desktop version Win11/64 Bit - 24" TFT monitor - ConturoMatic evaluation software; user manual - Cable set - CM software updates FREE!!! Technical Data CV120: Traverse unit (X/Z measuring axis) - Z measuring range: 30 mm - X measuring range: 120 mm - Measuring speed: 0.1–1.75 mm/s - Tilt adjustment: +/-15° - Automatic probe arm lift-off Z-column - Positioning range: 320 mm, motorized Accuracy: X-axis: +/- (1.2 μm + 2Lx / 25) μm* [L = mm] Z-axis: +/- (1.8 μm + 2Lz / 25) μm* [L = mm] Note: To adapt our CV120 to specific measuring tasks and for system extensions, various optional accessories are available, including different probe arms, universal clamping devices or custom sample holders. * as per T&S/CV120 specification -Technical changes reserved- Commodity code: 90318020 -2 year warranty- Photos may show special accessories not included in standard delivery. *For legal reasons, we are not permitted to provide legal or tax advice on this topic, and the above notes must not be considered as advice. Please consult your respective contacts (specialist department or tax advisor) if in doubt.

Condition: used, Year of construction: 2009, measuring range X-axis 0 - 160 mm measuring range Z-axis 0 - 300 mm Kodpfx Afjynbfiedolr tool adaptor SK 40 / BT 40 Resolution 0,001 mm Ambinent temperature 0 - 45 °C dimensions of the machine ca. 0,60 x 0,50 x 0,85 m weight ca. 60 kg Tool Presetter PWB - Tool Master 10 - incl. Measuring Electronics TC100

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Klodexn Ax Aopfx Afdor

Condition: used, This listing is for a Mitutoyo 202TP Vision Measuring System The unit is in full working condition and is ready for immediate release The Mitutoyo 202TP Vision Measuring System is a vision measuring machine — a type of optical metrology system that uses high‑resolution imaging and software to measure the dimensions of parts without physical contact. These systems are widely used for precision inspection of components in industries like automotive, electronics, medical devices and precision engineering. Kljdoxzgtdepfx Afdor Vision measuring systems eliminate many of the errors and limitations of manual microscope measurements by combining controlled lighting, high‑resolution cameras, automatic edge detection, and computer analysis to deliver accurate and repeatable measurements

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Kodewyddgspfx Afdolr Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: like new (used), Mitutoyo Linear Scale AT 600 New in original packaging Kodpfoym Aiyex Afdslr