Used Unknown Hammer Mill Rotor 730×600 Mm for sale (81,521)

Condition: used, Pair of steel angle plates Slots width: 22 mm Dwsdpfx Akez H I Ahjmjc Oblongs dimensions: 120 x 16 mm Width: 150 mm Depth: 445 mm Total height: 600 mm

Condition: used, Year of construction: 2009, Technical details: rotor dia: 30-500 mm hobbing length: 500-1000 mm total power requirement: 80 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 3,6 x 2,5 x 3,0 m max. module: 8 Dwodpov Hrp Ejfx Akmoc Max. module Et milling = 12 Max. module hobbing = 12 Max. axial travel = 110 to 1100mm Max. cutter speed = 300rpm Max. cutter displacement tangential = -350 to -55mm Max. table speed = 100rpm Table drive: torque motor Filter system: chip conveyor is for magnetic materials, belt filter is for all suspended matter that floats in the oil Including milling mandrel *

Year of construction: 1999, condition: good (used), Specification: Adjustable bed 2 foil pulls Variable Accel / Decel and delay pull pulse – to provide accurate foil pull and prevent preheating of foil. Foil Countdown in metres – this system will provide a warning that a foil change is required and is controlled via the touchscreen. Electronic front and sidelay sensors Auto impression Djdpfxshy N Uhe Akmjwc Preloader Machine has been completely built by Starfoil. Condition as is.

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, roll pitch: 130 mm, total width: 760 mm, total height: 740 mm, total length: 1,730 mm, conveying length: 3,880 mm, construction width: 760 mm, length (extended): 3,880 mm, TAF item number: 1000005781 Manufacturer: Blume Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,730 x 760 x 740 Conveyor length in mm: from: 1,730 to: 3,880 Conveyor width in mm: 600 Conveyor height in mm: from: 730 to: 1,120 Load capacity between 2 feet: Number of feet: 3 Roller type: plastic Rollers per axle: 2 Roller spacing in mm: 130 Roller diameter in mm: 50 Drive: Gravity Net weight: 230 kg Special features: - Dsdpox E U T Njfx Akmjwc Condition: Used / fully functional Function test: OK

Condition: good (used), Year of construction: 2009, Manufacturer: Siebtechnik Year of manufacture: 2009 Model: HM3 Feed opening: approx. 1373x725x760 mm Electric motor: 11 kW Grinding chamber opening: approx. 320 mm Maximum feed material size: 110 mm Dodpfjyfgk Sex Akmewc

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). Holp MultiGrip Bucket / MG.030.060 / MS03 / 600 mm cutting width / HARDOX / NEW Price: €3,320.00 net / €3,950.80 gross - Excavator up to: 3 tons - Weight approx.: 150 kg - Capacity SAE: 78 liters Dodpfx Akjymi Hfomjwc - Cutting width: 600 mm - Maximum opening: 730 mm - The bucket is made entirely of HARDOX. - The MultiGrip combines the two attachments, a deep bucket and a grapple, into a single tool. Advantages of the Holp MultiGrip Bucket: - Cylinder with hardened piston rod - Only the grapple swivel lines are required for operation - Robust mounting in the side wall - Secure gripping and transport - Stable shafts connect the two fingers (form a 3-point grip for small parts) - Significantly lighter than a grapple - Up to 30% more earth can be loaded into the bucket during excavation - Minimization of damage from falling material The MultiGrip is suitable for all excavation and gripping tasks; it is ideal for moving stones, filling earth, and gripping wood and brush, and is significantly faster than a grapple. It can grip and sort all types of materials, even earth or grass. Due to its unique shape, the MultiGrip bucket has optimal penetration and handles bulky material well. We have many other Holp products in stock that are immediately available! Please contact us for this at [phone number] / [email address]. Upon request, we will gladly provide you with a financing offer. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale are subject to change! = Further Information = New: Yes Intended Use: Construction Please contact Marius Herden for more information.

Year of construction: 2017, condition: used, Manufacturer: Tietjen Dwedpjx R Aw Tofx Akmjc Type: NDK 5.2-S Year: 2017 Type : Hammer mill Applications : Designed for wet shredding of bulk food and agricultural products, Motor type : hydraulic Frame and rotor in stainless steel 304, 1.4301. Weight (excluding motor): 1250 kg Injection nozzles for liquids Bearing temperature monitoring Pneumatically operated inlet flap

Condition: excellent (used), Professional height gauge from the renowned Japanese manufacturer Mitutoyo. The device is designed for precise height measurement and scribing on surface plates. This model offers a measuring range up to 600 mm and is equipped with a dial indicator and fine micrometric adjustment, ensuring very precise dimensional control. The robust construction and high-quality workmanship characteristic of Mitutoyo guarantee repeatable and reliable measurements. — Technical data: • Manufacturer: Mitutoyo (Japan) • Measuring range: 600 mm • Mitutoyo dial indicator • Indicator scale division: 2.5 µm • Micrometric adjustment • Stable, heavy base • Clear measuring scale — Applications: • Measurement of component heights • Scribing on granite surface plates • Dimensional inspection • Workshops, tool rooms, quality control departments — Condition: Used, in good technical condition. Shows normal signs of use. Sold exactly as shown in the photos. Dedpfsy Dirqox Akmjwc — Scope of delivery: • Mitutoyo height gauge • Dial indicator • Micrometric adjustment mechanism

Condition: good (used), total length: 1,000 mm, total width: 600 mm, total height: 2,500 mm, load capacity per storage section: 150 kg, TECHNICAL DATA • Manufacturer: META • Frame height: 2,000 mm • Base width: 1,300 mm • Frame depth: 600 mm • Shelf load capacity: 150 kg • Number of shelves per bay: 7 units • Surface: galvanized • Plug-in assembly • Condition: used Large quantities available immediately. Graduated prices net per unit plus VAT: Base bays: 1 - 5 bays: €86.00 6 - 20 bays: €77.40 21 - 50 bays: €73.10 51 - 100 bays: €68.80 From 101 bays: €64.50 Add-on bays: 1 - 10 bays: €64.00 11 - 25 bays: €57.60 26 - 75 bays: €54.40 76 - 150 bays: €51.20 From 151 bays: €48.00 Ex warehouse Nordhorn. Dsdpfxjz Ixxis Akmewc YOUR CONTACT PERSONS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We will gladly assist you with the transport and assembly of the goods. This item is available for pickup. Delivery or shipping is possible for an additional charge. The additional costs depend on the delivery location and the scope of the shipment and can be requested individually. TERMS OF PAYMENT Terms of payment will be agreed upon in the event of an order. The price is understood to be the unit price/net price, or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US The company DLK in Nordhorn trades in new and used products in the areas of warehouse logistics, conveying technology, storage racking, textile storage, as well as machines for trade, industry and crafts. We continuously offer you interesting used products from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us. Four wins – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: new, power: 55 kW (74.78 HP), Year of construction: 2026, A hammer crusher is a machine that uses high-speed rotating hammers to crush and break materials into smaller pieces. It is commonly used in various industries, including mining, cement, construction, metallurgy, and chemical processing. The basic principle of a hammer crusher involves a central rotor with hammers or blades that rotate and impact the material being crushed against a hard surface. Here are the key features and components of a typical hammer crusher: 1. Rotor: - The rotor is a central component of the hammer crusher. It usually consists of a shaft with multiple discs or hammers attached. - The rotor's rotation causes the hammers to swing outward, impacting the material. 2. Hammers: - Hammers are the striking or crushing elements attached to the rotor. They can be fixed or pivotally attached. - The material is crushed as the hammers impact it, generating kinetic energy. 3. Casing or Housing: - The casing or housing encloses the rotor and hammers, providing structural support and safety. - It also serves to contain the crushed material and direct it to the desired discharge point. 4. Grate Bars or Screens: - Positioned at the bottom of the crusher casing, grate bars or screens control the size of the crushed material by allowing smaller particles to pass through while keeping larger ones inside for further crushing. 5. Impact Plate: - Located near the bottom of the crusher, the impact plate absorbs the impact energy generated by the hammers and prevents excessive wear on the casing. 6. Drive System: - The hammer crusher is powered by a motor connected to the rotor through a drive belt or coupling. - The motor provides the necessary power to rotate the rotor, enabling the hammers to crush the material. 7. Adjustable Discharge: - Some hammer crushers feature an adjustable discharge, allowing users to control the size of the crushed material by adjusting the gap between the impact plate and the hammers. 8. Applications: - Hammer crushers are used for crushing a variety of materials, including coal, limestone, gypsum, aggregates, and various minerals. - They are commonly employed in the mining industry for primary and secondary crushing of ore. - In the cement industry, hammer crushers are used to crush limestone and other materials before they are mixed into the raw meal. 9. Maintenance and Safety: - Regular maintenance is essential to ensure the efficient operation of a hammer crusher. This includes checking and replacing worn hammers, inspecting the rotor, and lubricating moving parts. - Safety features, such as access doors and safety guards, are typically incorporated to prevent accidents during operation and maintenance. Technical Specifications (Typical MINGYUAN Series) Dwsdpfx Akeq I Nxdemoc Model Category,Max Feed Size,Capacity (t/h),Motor Power (kW),Rotor Speed (rpm) Small (PC-400), ≤100mm, 5 – 10, 11, "1,000" Medium (PC-800),≤200mm, 20 – 50, 55, 750 – 900 Heavy (PC-1200),≤350mm, 80 – 110, 132 – 160, 600 – 750 Heavy Hammer,"≤1,200mm", "500 – 1,000+ ","400 – 1,000" ,Variable

Year of construction: 2011, condition: used, Max. throughput: 25t/h, inlet width: 1300mm, inlet height: 1200mm, rotor diameter: 1200mm, drive power: 132-315kW, an on-site inspection is possible. Dwedpfszyq T Eox Akmoc

Condition: like new (used), Year of construction: 2018, operating hours: 591 h, load capacity: 2,000 kg, lifting height: 2,500 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, Manufacturer + model: JUNGHEINRICH EJG 320 Mast: 2W2500 ID: 24061.5795 Category: Demo Mast: 2W2500 Dwodpfx Akezv H Scomjc Lowered height: 2120 mm Lifting height: 2500 mm Capacity: 2000 kg Year: 2018 Hours: 591 hours Battery: 24 V / 330 Ah - GEL Options: A VERY unique COUNTERBALANCE stacker!!! Equipped with: - FREE-LIFTING adjustable forklift forks - SUITABLE for all types of pallets - POWER STEERING!!!

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Dedpoyz R Unofx Akmowc Weight: Estimated: Lbs250.0 Dimensions: 700mm X 1450mm

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Dsdpfjb A Iyuox Akmewc -Table surface: 400 x 600 mm -T slots: Slot width 12 mm -rotatable -tiltable and swivelling via cranks -Fits Deckel Mikron WMW and other milling machines -Weight: 200 kg -Quantity: 1 available Price: per piece

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Dwjdpfx Ajwiatiekmjc Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: excellent (used), The device was used for grinding apples for a belt press. The machine is fully functional and ready for operation; the price includes the mill and the pump. Dodpfjy Sibzjx Akmewc Please have a look at my other listings.

Condition: like new (used), Year of construction: 2019, operating hours: 183 h, load capacity: 8,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, construction height: 2,750 mm, Manufacturer + model: KALMAR ECG 80 / 6 * Mast: 3F4700 ID: 26106.8337 Category: Demo Mast: 3F4700 Forks: 2400 mm Lowered height: 2750 mm Lifting height: 4700 mm Capacity: 8000 kg Year: 2019 Hours: 183 hours Capacity: 80v / 1550ah Options: Equipped with: - FULL cabin (safety gates) - Joystick control for forward/reverse - Spreader / S.S. - Complete street lighting!! - LED spotlight Dwodpfozv Rr Hox Akmsc - Triplex FFL mast - Flashing light In complete LIKE NEW condition!!!!

Condition: like new (used), Year of construction: 2004, operating hours: 6,090 h, load capacity: 8,000 kg, lifting height: 5,700 mm, fuel type: electric, mast type: duplex, construction height: 4,100 mm, Manufacturer + model: KALMAR ECE 80 - 6 Mast: 2F5750 ID: 24051.5020 Dwjdpfx Akjzv H Tmjmsc Category: Used Mast: 2F5750 Forks: 2400 mm Lowered height: 4100 mm Lifting height: 5750 mm Capacity: 8000 kg Year: 2004 Operating hours: 6090 hrs Battery: 80 V / 1550 - NEW - Mfg. 09/2024 Options: - FULL cabin - LINDE steering - Duo pedal!!! - Spreader / S.s. - Spotlight - Duplex FFL mast - Completely NEW -> FEM 4 A - FORKS

Year of construction: 2025, condition: new, The LITech hammer mills HM 120/200/300/400 are ideal for the pre-shredding of medium-hard, hard-tough & brittle materials such as floors, precious metals, electronic scrap, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals and much more many more!! Dwjdpfx Ajg Ay Dhjkmoc

Year of construction: 2024, condition: new, The LITech HM 120 / 200 / 300 / 400 hammer mills are ideal for the pre-crushing of medium-hard, tough & brittle materials such as soil, precious metals, electronic scrap, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals and very many more!! Dwodpjgkr E Hofx Akmsc

Condition: used, Jonsored Chainsaw Mill EL-600, 9m cutting length, electric motor, 5.5 kW, 600 kg, maximum log diameter approx. 500 mm Dwsdpfx Aex H Udwjkmjc Prices subject to change without notice; errors, misprints, and typographical mistakes excepted.

Year of construction: 1985, condition: used, functionality: fully functional, Used Poeth Hammer Mill 2x75kW Drive Djdjxx Rzgjpfx Akmjwc Includes various spare parts Includes feeder unit

Year of construction: 2025, condition: new, The rotor mills RM 250 is ideally suited for the milling of soft & medium-hard samples like chemicals, charcoal, limestone, ceramic (porous), coal, chalk, sulfur, citric acid, sugar, titanium chips, glas, tire wire and many more! Dwsdpfef Ulibex Akmoc Max. feed size*

Year of construction: 2025, condition: new, The hammer mill HM 300 is ideally suited for grinding soft, medium-hard, brittle materials such as catalysts, electronic scrap, gypsum, epoxy resin and many more. Max. Feed size Dwedpfof Ulynex Akmoc

Condition: used, Year of construction: 1987, functionality: fully functional, We are offering this used Pallmann PHP 8-12 grinding plant (hammer mill), year of manufacture 1987. The precise diagrams with all individual components are available. Dedey Iu Rmjpfx Akmjwc