Used Varnalis Complete (Stationary) Sawmill for sale (11,915)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, Woodmizer SLP line and extraction system with log turner infeed fully operational video shows complete line with crosscut. £80,000 plus VAT cost over £250,000 just for the sawline. Contact me for any futher information. Pedjyub Ahjpfx Afgept

Condition: used, Year of construction: 1986, functionality: fully functional, We are offering this used Brenta Vertical Band Saw with automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type Progress 750 Machine no.: 409621 S268 N1143886 Maximum cutting length: 12 meters In the various photos, you can see: - overall view of the saw - saw machine nameplate - saw with extraction pit - automatic line behind the saw - pit under the lower wheel - infeed line from outside - infeed line as seen from inside - outfeed line inside - extra hoisting bracket to resaw pieces. This bracket can return the log onto the carriage with a chain - collection bin behind the outfeed line - collection bin seen from the other side. With red button operable both here and from the machine room - overview of the outfeed line - machine plate of the saw carriage - saw carriage in the outer position, where the log can be loaded - control room behind the saw - control room interior. Electronic measurement setting and control of all infeed and outfeed lines - wall-mounted electronics across from saw. Control current with relays, which can also be operated manually - Atlas Copco GX 11 FF compressor - Compressor nameplate, year of manufacture 2005 - Grass Air DW 31 air dryer - Stellite adjustment blocks for the guides where the saw blades run through Ppjdpfoyxhq Uex Afgot Technical information: - The machine must be supplied with air, hydraulics, and electricity (including control current) - The wheels (upper and lower) were ground approximately three years ago and can last for many more years. - Infeed conveyor control cabinet was renewed in 2025 - At the end of the infeed line, there is a crosscut saw which can trim capping, planks, or beams. This can be set electronically for thickness adjustment. This Brenta vertical band saw with automatic turning carriage is an excellent combination. The listed price is based on the EXW Incoterm, with dismantling by the buyer. If you have any questions or require further information, please feel free to contact us or give us a call.

Condition: new, Year of construction: 2025, High-performance industrial bandsaw Wravor WRC 1250 AC – robust, precise, and suitable for cutting large logs. Equipped with automatic control and advanced features for maximum efficiency! 📌 Key features: ✔ strong and stable construction ✔ high precision ✔ high cutting capacity ✔ automatic control ✔ reliable and robust construction Ppjdpfx Afjyz Taasgjt ✔ main wheels made from cast steel, dobule bearing (STABLE CONSTRUCTION!), wheel diameter: 1250 mm, width 135mm ✔ length of saw blade: 160/180 DOUBLE-SIDED) L = 9045 mm ✔ motor power: 55kW -110kW, frequency converter optional Saw width: Approx. 4500mm (depending on equipment) Rail width: Approx. 2300mm (depending on equipment) Saw weight: Approx. 23,500 kg (depending on equipment, on length of chassis) Max cutting width (between guides): 1300 mm

Condition: used, Year of construction: 1993, functionality: fully functional, We are selling our packaging timber sawmill: - Esterer frame saw H30 - EWD step feeder - with stacking system - Costa Multiprisma (35), logs up to 6 meters - Costa double-shaft saw type Leopard - Zeno drum chipper Pjdpfx Aswbpi Dofgspt - with numerous auxiliary machines The machines can be inspected on site by appointment if interested.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, FOR SALE – COMPLETE INDUSTRIAL SAWMILL LINE (EWD / SPRINGER / MICROTEC) High-performance, fully integrated sawmill plant featuring an EWD saw line for efficient industrial log processing. The system combines proven technology with continuous upgrades and is in excellent working condition. Cutting capacity: approx. 120,000 m³ roundwood per year The plant has been regularly serviced, professionally maintained, and is still partially in operation. Inspection during running production is possible by arrangement at any time. Availability: approx. June 2026 Scope of supply Log yard (infeed & preparation): • Sorting, measurement, and debarking line – SPRINGER (Year 2017) • Nicholson debarking machine (Year 1992) • Microtec measurement system (Year 2015) • 30 sorting bins • Cross-cutting plant (Year 2017) Saw line – EWD: • Twin-shaft circular saw DWK 700 (Year 1999) • Profile chipping canter PF 19-3SP/V (Year 2003) • Secondary circular saw BNK 225/6 (Year 2003) • Complete mechanisation and control system • EWD Optimes BK-100B edger Lumber sorting & ancillary equipment: • 7 sorting bins with stacking system • Complete chip and waste wood removal system • Kiln drying chambers and heating system Your advantages • Complete plant – ready for immediate operation • Proven industrial technology Pjdpfeyza D Eex Afgspt • Regularly maintained and modernised • Highly efficient in operation • Compact and high-performance design • Ideal for industrial lumber production General information • Main components built: 1992 – 2017 • Condition: very good • Availability: from June 2026 • Inspection: possible during operation by arrangement This plant represents an economically attractive solution for companies looking for a complete, powerful, and immediately available sawmill line.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 10,100 h, functionality: fully functional, type of input current: three-phase, cutting length (max.): 8,000 mm, overall weight: 19,500 kg, cutting height (max.): 800 mm, input current: 250 A, input voltage: 400 V, saw blade width: 500 mm, main saw diameter: 500 mm, Equipment: cabin, centralized greasing system, scorer, - Log circular saw, fully functional - max. log diameter 800 mm, max. length 6 m, individual pieces up to 8 m Ppjdsyc Ncropfx Afgjt - max. timber size 180/180 mm, in wide board mode 310/180 mm - automatic timber sorting - price includes log feeder, 2x outfeed conveyors, and 1x sorting conveyor

Condition: excellent (used), -1 Horizontal block bandsaw Hänni with tensioning carriage approx. 8 meters Roller diameter 1200 mm incl. accessories - Frame saw system Bögli, passage 700 mm - Tensioning carriage, hydraulic with auxiliary carriage - Split wedge Mara, driven - Powered roller conveyor, length 6 meters / total length approx. 12 meters - Vollmer automatic gang saw sharpener - Manual setting tool for teeth Pjdpjyr Dbuefx Afgept - Sharpening machine for CV saws Vollmer - Waste carriage / 2 electric cranes and various accessories. Can also be dismantled at additional cost.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, cutting length (max.): 8,000 mm, overall weight: 3,500 kg, saw drive: 22 W, total length: 10,000 mm, input current: 100 A, input voltage: 380 V, If you are looking for an optimizer log circular saw in good condition, please check the pictures. The machine is currently in operation. Unfortunately, we can only source small-diameter logs on the market. Efficiency is optimal only with diameters above 400 mm and log lengths of 4-5-6 meters. Thanks to the circular saw technology, high-quality materials can be produced with maximum yield. Maximum workpiece length: 8000 mm. The log infeed unit is a 4-chain design and can hold 5-6 m³ of wood. The machine is capable of bi-directional sawing. Large circular saw blade dimensions: 550x6.2/3.8x30 Z24+6 FZ. Ppjdpfoyv H Uyex Afgst

Condition: ready for operation (used), Year of construction: 2003, A sawmill is for sale. The Linck line is equipped with new automation from the Finnish company OT-Laite, manufactured in 2016. The Linck line speed is 100-120 m/min. It is operated by a single operator. Linck EV45 infeed turning device Chipper canter 1 Linck VM 50 Chipper canter 2 Linck VM 50 Scaner before profiling Lisker Profiscan / Seecon / ProfiTC. automation is made 2016. There is a room with all the necessary sharpening equipment Profiler group 1 Linck VPF340 , for 2 + 2 side boards Linck side board saw/ circular saw. 4 spindle Mechanisation for the removal of side boards Profiler group 2 Linck VPF 340 , for 2 + 2 side boards Linck resaw, max. cutting height 285 mm Transport to timber sorting Pedpfxjxg Ubyo Afgept Capacity: 400 m³ of sawn timber in 8 hours. line is 500 v and including transformer

Condition: ready for operation (used), Year of construction: 1990, functionality: unexamined, Log turning device Linck DV 35, not height-adjustable. Feed rollers are electrically driven. Price is as stated; a general overhaul can be offered on request. Ppedpfsymlm Iox Afgst

Condition: excellent (used), Year of construction: 2000, ARTIGLIO 1300 bandsaw complete with mechanization Ppsdpeyn Nrwjfx Afgst

Condition: used, For sale: BRENTA industrial log bandsaw with Progress log carriage Heavy-duty BRENTA industrial log bandsaw (bandsaw / frame) including Progress log carriage, from a professional sawmill. Pedpfxex Ndpho Afgopt Technical data - log bandsaw Manufacturer: Ateliers de Construction Louis Brenta SPRL (Belgium) Model: ETYELEC Machine serial number: 406341 Motor power: 60 HP (approx. 44 kW) Speed: 340 RPM Bandwheel diameter: Ø 1,400 mm Condition Bandwheels and frame overhauled and ground approx. 1 year ago New bearings on the bandwheels Runs smoothly Progress log carriage Heavy-duty industrial design Mechanical roller conveyor with chain drive

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2025, 1) Log Yard with 10 Boxes (Drop Boxes) – New and Used Log Feed and Sorting Line New Feed rate 50 m/min. as well as the following used components: Comprising: New cross feed conveyor, step feeder Used log transfer carriage, Used log transfer carriage with ejector, Used Cambio 50 debarker, Used split detection unit with belt, Measuring section, sorting log carriage. Including debarking; Inspection and Painting; including log infeed. Without boxes, sheet metal cladding, measuring system, discharge control, or control cabinet. Root reduction. 2) Log Infeed for Canter Line Heavy-duty cross log conveyor NEW Cross log conveyor in 4-strand execution Axle spacing: 7.5 m Total length: 8.0 m Drive shaft: 100 mm diameter Chain: Bush conveyor chain, pitch 100 mm – heaviest version Fixed rear stops, without sheet metal cladding Steel substructure: HEB 200 Construction height: 1000 mm Drive: geared motor 7.5 kW 3) Equalizer NEW Number of chains: 4 Axle spacing [mm]: 3500 Overall width [mm]: 5730 Paddle spacing [mm]: 1000 Drive shaft diameter [mm]: 100 Drive SEW [kW]: 7.5 Speed [m/min]: 10 Design: completely sheet metal covered between chain runs 4) Step Feeder NEW Feed steps: 4 Overall width [mm]: 4200 Plate thicknesses [mm]: moving steps 12 mm, fixed steps 20 mm Drive SEW [kW]: 18.5 Drive via crank mechanism and geared motor 5) Canter Line (WD brand) Log transfer carriage before RB 2 infeed Length extension to 18.5 m – drive and deflection RB 2 infeed with powered steel chain bed, designed for lateral log infeed. Conveyor chain with carrier dogs, frame in welded construction. Intake and centering unit ZE with log rotation unit TDV and centering device. Feeding unit ZE Log length: 2.5 – 5 m Clear width: min. 80 mm Clear width max.: 780 mm Construction height: 1000 mm Weight: 5400 kg Profile canter FZ 3 Machine frame with base frame 2 knife head housings with main shaft bearing, 2 knife heads with finishing segments, Drive power 90 kW Log diameter: min. 100 mm, max. 400 mm Chipping height above the chain max. 515 mm Distance between disks max. 570 mm Distance between disks min. 60 mm Disk diameter: 1260 mm Positioning via electric motors 2 hydraulic units 35 kW hydraulic pre- and post-cut Pre-cut square timber turning device Podeykr Aqspfx Afgopt Electrically powered roller conveyor TR 800 Centering and feeding unit ZE with FZ 3 canter

Condition: used, functionality: fully functional, The primary breakdown section of the saw line is available for sale. The package includes a Heinola (Ahlström) chipper canter and a quad band saw (BM1500), together with centering, infeed, and outfeed conveyors. The equipment is offered as a complete, fully operational solution. Ppodpfxeyka Nrj Afgst

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: Wood-Mizer WB2000 Bandsaw (Year of manufacture: 2020) Offered for sale is a Wood-Mizer WB2000 from 2020, which has only been in operation since 2021. The machine has been regularly maintained, used very little, and is in excellent technical condition. Technical specifications: powerful 30 kW electric motor Log diameter up to approx. 1 m Cutting width up to about 90 cm Load capacity approx. 6 tons Suitable for 90–100 mm wide band saw blades Equipment (included): complete loading/infeed conveyor outfeed table with three-way material distribution (left / right / straight ahead) Camera system for cut monitoring PRO operator panel with touchscreen retrofitted quick-clamping system Ppodpeyha Ipjfx Afgot The machine can be inspected and tested on site; everything works perfectly.

Condition: new, HORIZONTAL BAND SAWING MACHINE A 1200 BIG 150 Successor of A-1200 PLUS In addition to the functionality of its predecessor, the A 1200 BIG 150 is significantly larger, which results in increased performance. It is used for longitudinal cutting of wood in the form of beams, square timbers and planks. Thanks to its design, it can be operated by one person, which is now a valuable advantage of every industrial machine. Fittings: Length of the log cut: individually to the needs of the recipient Diameter of the processed log: 1500 mm Guide wheel of the bandsaw: 600 mm Band saw: length: 61500 mm Width: 40-50 mm Ppsdeu Sg A Ujpfx Afgst Main engine: 15 kW Electric lifting up / down Smooth feedrate control Hydraulic tension of the saw Average efficiency: 1-1.5m3 / hour (Depending on the size of the log) In addition, the A 1200 BIG 150 can be equipped with: increasing power to 18.5kW or 22kW electrically moving roller bark cutter SELBIT ISP-10 microprocessor cutting thickness controller operator seat stationary desktop plank discharge bed extension Hydraulics: Hydraulically raised retaining arms loading of the log leveling holdfast chain rotator leveling with hydraulic drive hydraulic aggregate 5.5kW

Condition: new, ✔ Band sawmills ✔ Multi saws ✔ Edge cutters ✔ Milling machines for pallet boards ✔ Wood cutters Why Boldrew? ✅ Over 30 years of experience in the industry ✅ Professionalism and precision ✅ Customer service in Europe, America and Africa We invite you to cooperate! Mobile band sawmill TS-1200 H Mobile band sawmill TS-1200 H Innovative technology for woodworking professionals The mobile band sawmill TS-1200 H is a technologically advanced machine designed for efficiency, precision and reliability. Thanks to its mobility and modern hydraulic solutions, the machine will meet the expectations of even the most demanding users. --- Technical data ·Length of the cut log: 100–820 cm Track bed: 6 meters, with an additional 4 meter long hydraulically folding segment ·Diameter of the processed log: up to 950 mm ·Band saw guide wheels: Ø 600 mm Band saw: ·Length: 4800 mm ·Width: 40-50 mm ·Main engine: Briggs & Stratton Vanguard V-Twin 35 HP combustion engine ·Generator: 8 kW to power additional components ·Head lifting system: Double-sided chain drive 16 B ·Feed control: Stepless adjustment for maximum control Pjdpfxevvw R Te Afgspt ·Saw tension: Hydraulic ·Debarker for the first log preparation ·ISP 10 cutting thickness gauge ·Electrically operated roller ·Adjustable Angle supports (load capacity 600 kg each) ·LED lighting, ideal for working in different conditions --- Advanced hydraulic kit The efficient hydraulic system allows easy and quick handling of the logs: ·Hydraulic support arms - stabilization of the log during cutting Log loading - 2 individual cylinders for operator comfort ·Wood leveling - 2 adjustment points ·Log pressure - 2 points for precise clamping ·Chain turner - 2 points, facilitates handling of the log ·Hydraulic motor: 8 kW Briggs & Stratton combustion engine with efficient hydraulic pump Mobility and durability Mobile axle: Double ALKO with brake and height-adjustable drawbar Construction: Solid and resistant to difficult working conditions Transport: Easy thanks to mobile chassis and compact dimensions Advantages of Trak A-1200 M 1. Versatility: Ability to cut large logs with different diameters and lengths 2. Mobility: Perfect for working in sawmills and directly in the field 3. Efficiency: Fast and precise cutting thanks to modern hydraulic systems 4. Operator comfort: Intuitive controls and ergonomic solutions

Condition: new, Year of construction: 2024, WRAVOR Horizontal bandsaws WRC 1050,1150,1225,1250,1550,2000 edgers, multirip saws, mechanization etc. Psdpfxetpwgxo Afgspt We are your contact for the company Wravor in Germany. We are happy to offer you the right machines.

Condition: used, Year of construction: 2006, For sale: LBL Brente log transport wagon with debarker – year of manufacture 2006 Ppedpfxsx Ndpbe Afgot We will be selling a complete series of machines from a sawmill. This is the first machine from this lineup – keep a close eye on our website for additional offers. Dimensions and technical specifications can be found in the PDF documents.

Condition: new, Year of construction: 2025, HIGH-PERFORMANCE WRAVOR BANDSAW, SPECIALLY DESIGNED FOR PRECISE AND EFFICIENT CUTTING OF LAMINATED BEAMS. IT ENSURES HIGH-QUALITY CUTS, MINIMAL MATERIAL LOSS, AND OPTIMAL PRODUCTIVITY. 📌 Key features: Pjdpfsvu Um Nex Afgjpt ✔ Precise cutting of laminated beams ✔ Automatic control for increased efficiency ✔ Robust and reliable construction

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 09001M, type of input current: three-phase, cutting length (max.): 10,000 mm, overall weight: 50,000 kg, cutting height (max.): 700 mm, total length: 38,000 mm, input current: 125 A, Complete sawmill with chipper and debarker, including sawdust turbine. For sale: a complete and fully operational KARA Master sawmill—an efficient and robust solution for professional timber processing. The sawmill operates on a 125 Amp electrical supply and is fully functional. It can process logs with diameters up to 70 cm and lengths of 10-11 meters. The sawmill features fully adjustable thickness settings along a rail system, allowing you to pre-set various cutting thicknesses as required. Cutting depth ranges from 13 mm up to 315 mm, enabling production of everything from thin boards to heavy beams—precisely and efficiently. Pedpfx Afoxz Eg Nogjpt The system is equipped with a debarker to protect the saw blade and ensure clean, uniform cuts. For handling residual materials, a chipper is included to facilitate the easy and practical disposal of wood waste. Finished timber can be sorted into three separate stacks, promoting an organized and streamlined workflow. This machine is ideal for larger sawmills and timber companies seeking high-capacity and flexible production. Disassembly and transportation of the sawmill is the responsibility of the buyer. Estimated transport dimensions are 12.5 x 2.5 x 3 meters (L x W x H) per truck, with a total of 3-4 truckloads anticipated.

Condition: excellent (used), functionality: fully functional, Söderhamn small log line with Euromill profiles Debarker Cambio 45 with infeed and guide work after 2D scanner Söderhamn 447 infeed 240-12 chipper canters Pedpswp E E Djfx Afgspt Block tilt and infeed 240-12 chipper canter Euromill profiles Board separator with adjustable center Chip conveyor under saw line Hydraulic units and electrical cabinet.

Condition: excellent (used), functionality: fully functional, ARI high capacity line for big logs Log deck 2 sections Step feeder Ppodpfx Afswp E Tnegjt Log conveyor Debarker infeed (Remill) Debarker Cambio 90-75/6 (or a Cambio 500) 2d scanner for reject boxes Log conveyor with 2 reject boxes Log conveyor, kickers to the left Buffering deck and step feeder Log conveyor Rema 3d scanner AriVislanda LT2 auto log turner 2006 AriVislanda LI-600 log centering infeed 2006 AriVislanda RL-600 Reducer AriVislanda QSS-700 Saw 2011 AriVislanda VFW 600 L 2011 AriVislanda board separator 2006 Block tilt AriVislanda block infeed type Nils AriVislanda RC-600 Reducer Ingvar Persson turn table AriVislanda 500A Infeed AriVislanda 509-7F Multirip AriVislanda boardseparator Beltconveyor Dual Edging lines Söderhamn (1 left 1 right) 2 x 300 m/min Cross conveyors Söderhamn Elevator Söderhamn 483 Scanners Söderhamn 528 Infeed Söderhamn 5100 Edger Söderhamn 5400 Edger outfeed with reject displacement EdgeIT system

Condition: good (used), Year of construction: 1996, functionality: fully functional, Complete Kara Master sawmill Year of construction 1996 CE mark The sawing line consists of 2 Kara Master 08M sawing machines 1 Kara edger Technical data of the KARA MASTER machine Motor: 37kW / 1500 rpm Hydraulic unit: 5.5kW / 1500 rpm / 50 Hz Transfer table 9.5 m long, 0.7 m wide Weight, kg approx. 4900 kg Saw blade diameter 800-1200 mm (with undercarriage 800...1100 mm) Cutting height: 295...495 mm Recommended speed for the saw blade diameter 800mm 1300r/min Ppjdpfx Asum I S Eefgjt 900mm 1170r/min 950mm 1100r/min 1000mm 1050 rpm 1100mm 960r/min 1200mm 880 rpm Diameter of the blade hole: 50 mm 015 mm, distance from blade hole 50 mm 9 m x 660 mm Additional equipment Pump: 34 l/min, 150 bar (blade shaft speed 1100 rpm) 180 bar from the tractor hydraulics (only in mobile) Stepless feed 0...130 m/min Kara Pro 200 control unit Programmable up to 120 sizes in steps of 0.1 mm. Programming addition during sawing, storage of the last dimension used. 9 Feed speed, m / min infinitely variable 0-130 m / min Kara Edger Type 32-250 Year of construction 1996

Condition: used, functionality: fully functional, Equipment: cabin, For Sale: Complete Log Sawing Line Complete log sawing line in excellent condition, ideal for professionals in the wood industry. This robust and high-performance equipment will allow you to optimize your production. Technical details: 23.5 m bark conveyor Storage capacity for 30 logs over a 16 m length 5 stops 4 log turners 5 flippers Double-guided log clamp with independent HYDRAULIC output Straightening function for better log alignment Powerful and precise winch for optimal control 30 m ejection rollers with 4 Left/Right ejections Complete operator cabin, excellent condition Other features: 140 frame LBL slabber Loader Pre-crosscut saw Hydraulic carriage with 5 stops, Gillet brand Psdpfx Afexdc H Esgept Complete mechanization for increased performance For more information, photos, or to arrange a visit, please contact us!