Used Vernet Behringer Cnc Saw Drilling Line for sale (25,778)

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BCOR12150, BIESSE BREMA EKO 902 CNC and vertical dowel insertion machine for reduced cycle times Equipment Features Ppsdpfx Ajw Nytnsf Rew - Clamping grippers measure the thickness to adjust drilling depth - Laser-based measuring system for detecting the front and rear panel edges - Length tolerance compensation correcting the workpiece length in X - 5-position tool changer - Drilling head with individually retractable spindles and grooving saw - Diameter: 120 mm - Gluing and dowel insertion units mounted on Y and Z axes Options - 4.5 kW electrospindle; 18,000 rpm - Special drilling unit for hinges Technical Data - Panel length: 160 - 3200 mm - Panel width: 35 - 900 mm - Panel thickness: 8 - 80 mm - X/Y/Z axis speed: 100 / 60 / 30 m/min - X axis travel: 3200 mm - Y axis travel: 900 mm - Main spindle power: 4.5 kW - Number of controlled axes: 3 axes - Number of drilling spindles: 20 - Number of tool positions: 5

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 24,000 kg, sheet thickness steel (max.): 60 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO B254 - CNC PUNCHING, DRILLING & THERMAL CUTTING CENTER | YEAR 2015 The Ficep Tipo B254 is a CNC-controlled punching, drilling and thermal cutting center for the complete processing of steel plates and flat products in a single pass. Punching, drilling, countersinking, tapping, marking and thermal cutting via plasma and oxy-fuel are carried out on one machine without intermediate handling. CONDITION Used - technically sound. The machine is currently in productive operation and CAN BE INSPECTED UNDER POWER (by appointment). Handover as preferred: directly from ongoing production (cleaned and serviced) or - at additional cost - reconditioned by ASM. Details on the technical condition are disclosed individually upon serious interest. FUNCTION & APPLICATION The system combines three processing units in one CNC-controlled line: hydraulic punching unit (1000 kN), drilling head (20.1 kW) and thermal cutting unit with plasma torch (Hypertherm HPR 260) plus oxy-fuel torch. All processes run via the Mitrol CNC as automated machining cycles; the machine processes steel plates up to 2540 x 6000 mm. Typical applications: structural steel fabrication, structural engineering and prefabrication of gusset plates, end plates and connection plates. TECHNICAL DATA - Machine type: Automatic CNC punching and thermal cutting system for plates - Year: 2015 | Serial number: 34201 | Machine weight: 24,000 kg - Working height: approx. 1,090 mm | Max. positioning weight (plate): 5,000 kg - Max. plate size: 2540 x 6000 mm | Min. plate width: 508 mm - Punching force: 1000 kN | Stripping force: 100 kN | Punching tools: 8 - Max. punch diameter: 32 mm | Max. punching thickness: 20 mm - Drilling heads: 1 | Drilling tools per head: 8 - Max. drilling diameter: 40 mm | Max. drilling thickness: 100 mm - Spindle power: 20.1 kW | Max. spindle speed: 4000 rpm - Plasma torches: 1 | Oxy-fuel torches: 1 | Plasma source: Hypertherm HPR 260 - Max. plasma cutting thickness: 35 mm (pierce start) / 60 mm (edge start) - Max. longitudinal feed speed: 30 m/min - CNC control: Mitrol CNC (master/slave), online remote diagnostics - Processes: punching, drilling, countersinking, tapping, milling, marking, scribing, oxy-fuel and plasma cutting Min. plate length, max. overall material thickness and cross positioning speed are confirmed during inspection. SCOPE OF DELIVERY - 1 x Ficep Tipo B254 plate processing center (year 2015) - 1 x Hydraulic punching unit 1000 kN with 8-position tool changer - 1 x Drilling unit 20.1 kW with 8-position tool changer Ppedpfxexn T H Do Af Rsw - 1 x Plasma cutting torch | 1 x Oxy-fuel cutting torch - 1 x Hypertherm HPR 260 plasma cutting system - 1 x Marking unit (configuration to be confirmed during inspection) - 1 x Chip conveyor - 1 x Donaldson Torit dust extraction system | 1 x Punching tool set LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in Ficep structural steel machines. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing under power | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2019, Saw blade diameter: 350 mm Cutting area flat 90°: 170 x 100 mm Sawing area flat 45°: 120 x 100 mm Cutting area round: 120 mm Pneumatic Saw Blade Feed Coolant pump / minimum quantity spray device Pneumatic material clamping Pedpfjznxg Nox Af Rspw Presented for sawing of stainless steel Length stop with automatic positioning up to 6200 mm Roller conveyor with 1000 mm left Weight: approx. 800 kg

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Ppjdpfx Aju Tln Nef Row Weight of the chip conveyor approx. 200 kg good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition Pjdpfx Afohik Ezo Ropw

Year of construction: 1995, condition: ready for operation (used), 4 Lenz CNC PCB drilling and routing machines are offered. 1) One CNC vertical PCB drilling and routing machine, Lenz LGX 460-2AL, year of manufacture: 1995, travel X/Y: approx. 550mm/460mm, rapid traverse X/Y: approx. 40m/min, max. drilling rate Z-axis: approx. 500strokes/min, spindles: Precise SC53H, spindle speed: approx. 20000rpm, tool holder: 3mm, tool capacity: 308, control: SIEB & MEYER CNC 44.00. Equipped with a cooling unit and a loader. Overall dimensions of the base machine X/Y/Z: approx. 1650mm/1700mm/2250mm, additional length of the loader unit: approx. 820mm. 2) One CNC vertical PCB drilling and routing machine, Lenz GX 460-2, year of manufacture: 1989, travel X/Y: approx. 550mm/460mm, number of spindles: 2, rapid traverse X/Y: approx. 15m/min, max. stack height Z-axis: approx. 10mm, tool holder: 3mm, tool capacity: 88, control: SIEB & MEYER CNC 45.00, equipped with a cooling unit, overall dimensions X/Y/Z: approx. 2100mm/1450mm/1800mm. 3) One CNC vertical PCB drilling and routing machine, Lenz GX 600-1, year of manufacture: 1991, travel X/Y: approx. 650mm/600mm, number of spindles: 1, rapid traverse X/Y: approx. 15m/min, spindle: Precise SC63, spindle speed: approx. 20000rpm, tool holder: 3mm, tool capacity: 88, control: SIEB & MEYER CNC 44.00. Equipped with a cooling unit, overall dimensions X/Y/Z: approx. 2000mm/1500mm/1800mm. 4) One compact CNC vertical PCB drilling and routing machine, Lenz TB 500-1, travel X/Y: approx. 475mm/390mm, number of spindles: 1, rapid traverse X/Y: approx. 10m/min, spindle speed: approx. 15000rpm, tool holder: 3mm, control: SIEB & MEYER CNC 35.00. Equipped with a cooling unit and a spare control unit, overall dimensions X/Y/Z: approx. 1500mm/1100mm/1520mm. The machines can be purchased individually or as a package. Inspection possible by appointment. Ppjdpfxoznmy Dj Af Rsw

Condition: excellent (used), Year of construction: 2022, CNC through-feed drilling machine KD-612KHSA, year 2022 Ppedpewutrijfx Af Rjw -3 independent drilling units -Spindles: 26 vertical, 12 horizontal (top), 9 horizontal (bottom) -2 routing units (top 5.5 kW, bottom 3.5 kW) + 2 grooving saws -KDT control software, Dell PC, Windows environment -Automatic barcode scanner -Simulator module -2 feed grippers -Side automatic pressure unit -Waste conveyor belt Price is without VAT.

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm Ppodpsq Ii Dlsfx Af Rew undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, machine/vehicle number: 005836, X axis working area: 3000 mm Y axis working area: 1000 mm Main Electrospindle power: 3.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 82 Pjdpfewuckuox Af Rjpw

Condition: used, machine/vehicle number: 008689, X axis working area: 6735 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Ppjdpfsznuxbex Af Rew Maximum edge height: 65 mm Total number of drilling spindles: 30 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 008495, X axis working area: 3050 mm Y axis working area: 1400 mm Working Table: Pod and Rail Ppedpfey Edqqex Af Rjw Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Maximum edge height: 45 mm Total number of drilling spindles: 21 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 007842, X axis working area: 5000 mm Y axis working area: 1200 mm Working Table: Pod and Rail Pedpfx Ajyhbiuef Ropw Main Electrospindle power: 18 KW Number of controlled axes: 4 axes Maximum edge height: 64 mm Total number of drilling spindles: 14 Total number of tool changer positions: 18

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, CNC Drilling and Milling Center Donau DANUSYS 2910, Year of manufacture 2002, overhauled Technical Data: Control: Heidenhain iTNC 530 Travel distances (X, Y, Z axis): 2900 / 1000 / 700 mm Milling capacity in St 60: 300 cm³/min Drilling in solid St 60: ø 40 mm Tapping: M30 Feed rate (X, Y, Z axis): 7 / 7 / 7 m/min Spindle: HSK 63, 15,000 rpm Coolant: internal (IKZ) and external (AKZ) Tool changer with 32 positions, divided into 2 x 16 slots Ppodpfxozlx Axj Af Rew Overhauled components: - Spindle fully overhauled and rewound by the manufacturer - Spindle controller repaired - Overhaul of Heidenhain power supply unit - Main computer (MC422) and control unit (CC422) checked (Heidenhain) - Carriage and guide rail of the Y-axis replaced Additional accessories: Handwheel HR 410 Chip conveyor with integrated coolant tank Documentation (operating manual, various manuals for installed components, circuit diagram, etc.) Sale ex stock; Subject to prior sale

Condition: used, Second-hand machine Second-hand Ganner Compact 30 row drilling machine Features and technical specifications: 2 drilling beams, each with 15 spindles Ppjdpfx Aezk Nwdjf Row Pitch 32 mm Drilling unit position adjustment 0–650 mm Distance between rows of drill holes: at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Maximum workpiece clamping height: 70 mm Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Location: Solingen

Condition: excellent (used), Flexible N.C. line for drilling, routing and "hardware" insertion. Numerical Control "TPA" Albatros. Composed by: 1) Hedgehog loader, with 12 positions (for 12 panels), vertical panel introduction. 2) CNC Drilling and routering machine Mod. Over 25.13 with inserter (for bushes, shelf support and base). - N. 1 operating head (estimated KW 5,5) with tool storing revolver (10 positions) - N. 1 boring head with 24 independent spindles (X axis) - N. 1 boring head with 2 independent spindles (Y axis) - N. 1 boring head with 5 independent spindles (Z axis) - N. 1 insertion unit (bushing screwing) - N. 1 insertion unit (shelf support pressure) - N. 1 storage and feeding tank 3) Unloader (90° side-deplacement), with motorized conveyor for vertical outfeed of the panel. Podehvagkepfx Af Repw 4) Unloader - tilting (0°-90) moves the panel from vertical to horizontal, with motorized conveyor

Condition: excellent (used), 4-SIDES LINE of Sizing-Edge Banding and Drilling, composed of the following machines: A) Loader (portal/bridge) double pick-up station "IMA" with central motorized rollers conveyor. With 2 external on-ground roller ways to in-feed the piles (stacks) of panels to the Loader. B) 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima/N/II/230/A/R3 (mm 1300) C) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. Psdpfeyyb Suex Af Rspw D) 2nd Double-side Sizing & Edge Bander "IMA" Mod. Combima / II /740 / B / R3 + (mm 3300) With KFA 30 (multi-profile copying Unit for fine-trimmimng and corner rounding) E) Drilling machinee "IMA" Mod. I-Magic (with 2 horizontal units + 4 bottom vertical unitsi) F) Motorized rollers conveyor "IMA" G) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. H) Stacker (portal/bridge) double stacking station "IMA" with central motorized rollers conveyor. With 2 external on-ground roller ways to out-feed the piles (stacks) of panels from the Stacker

Condition: new, Year of construction: 2023, machine/vehicle number: MR005937, Universal drilling and grooving CNC machine. Easy to use, compact, and fast in processing. The machine is equipped with the following options: - Panel end sensor - Z-axis pressure increase (recommended for hard materials) - Maestro CNC software Podewy U A Hepfx Af Ropw - Keyboard type: Qwerty - Fan for electrical cabinet cooling - Automatic lubrication system Technical specifications: - Minimum panel thickness: 10 mm - Maximum panel thickness: 50 mm - Minimum panel length: 300 mm - Maximum panel length: 3000 mm - Minimum panel width: 90 mm - Maximum panel width: 900 mm - Positioning speed: 20 m/min - Number of vertical drilling spindles: 7 pcs - Number of horizontal drilling spindles (Y-axis): 2 pcs - Number of horizontal drilling spindles (X-axis): 2 pcs - Integrated grooving saw blade: Yes - Diameter of grooving saw blade: 125 mm - Motor power: 3 HP - Serial number: KK00039354

Condition: used, Second-hand machine Features and technical specifications: - double-sided in-line drilling machine - 2 drilling motors, 1.8 kW each, with oil brake cylinders - Stroke: max. 130 mm - with pneumatic changeover valve Podpfx Aszk Nrbof Rspw - 21 spindles, spindle pitch 32 mm - Drilling spacing: max. 640 mm (by moving the workpiece max. 2656 mm) - Gantry clearance 850 mm - Air consumption at 5 atü: approx. 11 l per cycle - Extraction connection 160 mm Dimensions: approx. 3100 x 1100 x 1800 mm Weight: approx. 350 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2010, Automatic technological line for sawing wood Technical data: Podpfx Aelar Rief Rspw - Max wood diameter 400 mm - Minimum wood diameter 120 mm - minimum timber length 1500 mm - Max log length 3200 mm CAPACITY UP TO 200 m3 per shift The machine consists of the following elements: - Log loader - Sawmill longitudinal feeder - Sawmill TT 5/600/400 G - Motors 75 + 90 kW - Receiving roller table with ejecting mechanism for edgings and side boards - Driven roller table - Base table SB 4000 - Multi-saw WP 210 - 2 x 75kW engines - Receiving table - Lower return conveyor of edgings, waste to the chipper The machine is in good condition, in continuous operation - the possibility of viewing during operation

Year of construction: 1994, condition: ready for operation (used), A refurbished Kaltenbach CNC cold circular saw with an L45NC length stop is available. Year of refurbishment: 2016, max. feed length: 1000mm, miter adjustment: +/-90°, saw blade dimensions X/Y/Z: 400mm/3.2mm/40mm, max. cutting diameter: 130mm, max. cutting capacity for rectangular material: 315mm/40mm, max. cutting capacity for square material: 120mm/120mm, cutting speed: 3000m/min, saw blade feed range: 0mm-1100mm/min, max. material feed speed: 10m/min, machine dimensions X/Y/Z: approx. 2350mm/1250mm/1800mm, weight: approx. 1900kg. Documentation available. An on-site inspection is possible. Pjdezi Ehvjpfx Af Repw

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 Ppsdpfx Asy E N Hdof Rsw 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit

Year of construction: 2016, condition: excellent (used), Voortman V808 CNC Beam Coping Line – Year 2016 (REF: STK‐1549) Pjdpslff H Ejfx Af Rjpw Coping Robot | Automatic in‐feed & out‐feed | 1.25m Sections | Roller Feed Kjellberg SmartFocus 300A Plasma Unit | Donaldson Extraction System

Condition: good (used), Year of construction: 1999, CNC PUNCH / DRILL / SHEARING LINE for angle and plates. TECHNICAL DATA. PUNCH INSTALLATION. MATERIAL SPECIFICATION material sample steel 52 plate size (MM) X (MM) max 300 x 25 material sample steel 37 plate dimension (MM) X (MM) min 60 x 6 max 400 x 20 angle line dimension min 50 x 50 x 5 max 150 x 150 x 5 Punch information TYPE P2- XXX-XX number 2 Psdpfxovkphgs Af Ropw TYPE P3-XXX-XX number 3 TYPE P5-XXX-XX number 5 punching capacity tonnage 110 punching diameter (mm) x thickness (mm) max 32 x 20 Shear UNIT Shear tonnage 180 Capacity max 400 x 20 Stamping UNIT Total number of characters number 40 Maximum number of characters per operation 12 CONNECTION VALUES Voltage 3 phase + Neutral + Earth V 3 X 400 Fuse A 63 slow Power KW 25 Frequency HZ 50 Permitted m-axis tolerance mains voltage % +/- 10 Field rotation Right Air pressure bar 6-8 Air capacity m2 / hour 250

Condition: excellent (used), Year of construction: 2012, · V200 Plate drilling machine (executed with a VD40 drilling unit and an X-Y coordinate table). · VTC 8/40 tool changer (8 places). · Hydraulic numbering unit VN 1/16 · Deburring unit VDB 2 (each hole is automatically deburred). Max. length 1.400 mm* Max. width : 1.000 mm Min/max. thickness : 3 - 60 mm Podewphgdepfx Af Repw Capacity : : 600 kg * Longer lengths (max. 2 400mm) possible by automatic repositioning.

Year of construction: 2012, condition: excellent (used), 3 Spindle. 21 Metres of In‐feed rollers. 21 Metres of Out‐Feed Rollers. 1.25 metres Sections. Psdoh Rrxpjpfx Af Rjpw Roller Feed measuring. Cross Transfers.