Used Voumard Schleifspindeln Refu Hf for sale (841)

Year of construction: 1977, condition: used, machine/vehicle number: IntNr231519, A used Jung HF 40 surface grinding machine, manufactured in 1977, is offered for sale. This is a robust, heavy-duty model. Technical data: Type: Hydraulic Table size: 400 x 150 mm Grinding length: 400 mm Tedpfx Akjzqdlioloa Grinding width: 150 mm Grinding wheel diameter: 200 mm Grinding wheel width: 16 mm Spindle speed: approx. 2,800 rpm Table speed: infinitely variable from 2 to 20 m/min Automatic vertical feed: 0.002–0.013 mm Machine weight: approx. 900 kg Machine dimensions: approx. 1,300 x 1,200 x 1,500 mm The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in the technical data and information.

Condition: used, power: 125 kW (169.95 HP), Year of construction: 2026, operating hours: 118 h, Operating hours: 118, First registration: 04/21/2026 Max. lifting capacity: 5,000 kg Max. lifting height: 7,800 mm Max. outreach: 4,200 mm Length to carrier: 4,870 mm Width: 2,350 - 2,530 mm Height: 2,530 / 2,590 mm (CS activated) Total weight with load forks: 9,990 kg Total weight without load forks: 9,700 kg Engine: 4-cylinder FPT N454, displacement 5 l, water-cooled Power: 125 kW (170 hp) 2,300 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable flow rate Motor: Swashplate motor EPD PLUS incl. with optional automatic speed increase Mineral hydraulic oil HVI 46 Transmission: 2 gears Electrohydraulically controlled Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: Enclosed cab Split door 360-degree all-round visibility ROPS/FOPS tested GRAMMER air-suspended seat with safety lap belt Heater Front, roof, and rear window wipers Sun visor 4x1 joystick, electronic with capacitive activation incl. direction of travel switch CS = hydropneumatic vibration damping of the cab Telescopic boom: 2-part with electronic end-of-stroke damping (Soft Stop) and telescopic arm suspension (BSS) Carrier: Quick-change system, type "ZM3" with triple locking, hydraulically controllable from the cab Leveling: hydraulically controlled Steering: Hydraulic steering 3 steering modes: All-wheel steering, front-wheel steering, crab steering Drive: Permanent all-wheel drive Axles: Front axle manually adjustable Rear axle oscillating with differential lock Braking system: Disc brakes on all 4 drive axles Automatic parking brake when engine is stopped Frame design: Made of high-strength steel Hydraulic system: Pump with variable flow rate, type "LOAD SENSING" Flow rate max. 160 l/min Pressure max. 250 bar Flow-sharing control block Hydraulic quick-coupling system Electrical system: Todjzpcu Tjpfx Aklsa 12 V Battery with 100 Ah Alternator 120 A Stabilization control: computer-assisted (ASCS system) with fully electronic stability control and simple weighing function, audiovisual signal and overload shut-down as well as implement recognition Display in the display Warning and shut-down in case of overload Tires: 500/70 R24, agricultural lug profile Additional equipment: EU approval as a tractor/agricultural tractor 40 km/h incl. trailer hitch, height-adjustable, self-locking, 37/38 mm pin, incl. connection for trailer lighting Air conditioning LED work lights on the cab (2 front, 2 rear) instead of the standard halogen headlights 360° LED work lights (incl. 2x LED at the end of the first arm + 4 more LED lights on the machine) Double rear hydraulic connection with switchover Location: 54595 Prüm

Condition: ready for operation (used), functionality: fully functional, Jung HF-50 Tsdpfjzm Un Tsx Aklja

Year of construction: 2021, condition: used, GH INDUCTION | EMMEDI HF welder 100kW In excellent working conditions. Year 2021. Solid-state high-frequency induction heating generator 100Kw for tube welding applications · Welding frequency: 400 KHz · Power: 120 KVA Todpfx Aozkf Thoklsa · Modules: SiC SiliconCarbide IGBT Scope of supply · Power cabinet with digital control (MPC-3 HMI touchscreen interface) · Oscillator module · XYZ motorized inductor positioning system · Operator control desk with diagnostic display, manual/automatic modes · Cooling system with air–water heat exchanger Welding frequency: 400 KHz Power: 120 KVA Modules: SiC SiliconCarbide IGBT

Condition: new, Rexroth Indramat RD500 Refu RD43.1-4R-185-W-NN-FW drive, serial number as shown in the photo, unused, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Tedpei Ecymefx Aklsa

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 89518, type of input current: three-phase, welding current (min.): 5 A, welding current (max.): 350 A, EWM Tetrix 350 AC/DC HF water-cooled TIG welding machine – 350 A For sale is a high-quality EWM Tetrix 350 AC/DC HF TIG welding machine from the inventory of Syntegon Technology GmbH. The machine was used in an industrial environment and is being sold as part of an inventory reduction, as it is no longer needed for production. The machine is fully functional and has been regularly maintained and inspected. The annual safety inspection certificate is available. This welding machine is suitable for both demanding TIG welding applications and electrode welding. The AC/DC technology allows for the processing of steel, stainless steel, and aluminum materials. Technical data: Manufacturer: EWM Model: Tetrix 350 AC/DC HF Year of manufacture: 2004 Welding current range: 5 – 350 A Power supply: 400 / 415 V Welding processes: TIG and electrode Water cooling with water cooler Torch included Condition: Tedozlrnnjpfx Aklja Functional Safety inspected Used, from ongoing production The machine is ideal for workshops, metalworking shops, metal construction companies, as well as training and repair facilities that are looking for a reliable industrial welding machine. Inspection is possible by prior appointment. Loading can be arranged. Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Dismantling, removal, and transport are the responsibility of the buyer and at the buyer's risk. • The buyer is responsible for providing personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 19200, type of input current: three-phase, type of cooling: water, welding current (min.): 5 A, welding current (max.): 300 A, Equipment: type plate available, EWM TIG 300 DC HF TIG welding system with water cooling – functional For sale is a high-quality welding system from Syntegon’s production stock. The system is being sold due to a change in production processes or because it is no longer needed and comes from industrial use. The unit is functional and has been regularly inspected. The annual safety inspection report (UVV) is available. Technical data Manufacturer: EWM Model / Type: TIG 300 DC HF Year of manufacture: 1999 Serial number: 98350019004 Inventory number: 679 361 Tsdpfx Aozlrkisklsa System number: 7000 1520 Welding process: TIG (GTAW) and SMAW (shielded metal arc welding) Welding current: 5 – 300 A Mains connection: 400 V Equipment TIG torch included Water cooling Integrated water cooler included Condition Functional Annual safety inspection report (UVV) available Used, from ongoing industrial operation Important conditions: Giscl Iozhnbpsdcwwjw Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales / Transfer conditions: • Dismantling, removal and transport are the responsibility of the buyer and at his own risk. • The buyer provides personnel, tools and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly.

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 97136003344, type of input current: three-phase, input voltage: 400 V, type of cooling: water, welding current (min.): 5 A, welding current (max.): 250 A, EWM TIG 250 DC HF water-cooled TIG welding machine – 250 A For sale is a used EWM TIG 250 DC HF TIG welding machine from the production stock of Syntegon Technology GmbH. The unit is being sold due to production adjustments and stock reduction, as it is no longer needed. Tsdszlrhhspfx Akloa The machine is functional and in used condition, appropriate for its age. The annual safety inspection has been carried out regularly. Technical data: Manufacturer: EWM Type: TIG 250 DC HF Year of manufacture: 1997 Welding current: 5 – 250 A Mains connection: 400 V Welding process: TIG (GTAW) and electrode (SMAW) Water cooling with existing water cooler Welding torch included Condition: Functional Safety inspection available This machine is ideal for workshops, metalworking shops, metal construction companies, as well as training and repair companies looking for a reliable industrial welding machine. Inspection is possible by prior appointment. Loading can be arranged. Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Disassembly, removal and transport are the responsibility of the buyer and at his own risk. • The buyer is responsible for providing personnel, tools and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 98350019004, type of input current: three-phase, type of cooling: water, welding current (min.): 5 A, welding current (max.): 300 A, Equipment: type plate available, EWM TIG 300 DC HF TIG welding system with water cooling – functional For sale is a high-quality welding system from Syntegon’s production stock. The system is being sold due to a change in production processes or because it is no longer needed and comes from industrial use. The unit is functional and has been regularly inspected. The annual safety inspection report (UVV) is available. Technical data Manufacturer: EWM Model / Type: TIG 300 DC HF Year of manufacture: 1999 Serial number: 98350019004 Inventory number: 679 361 System number: 7000 1520 Welding process: TIG (GTAW) and SMAW (shielded metal arc welding) Welding current: 5 – 300 A Mains connection: 400 V Equipment TIG torch included Water cooling Integrated water cooler included Condition Functional Annual safety inspection report (UVV) available Used, from ongoing industrial operation Todpfxszlrdco Akloa Important conditions: Giscl Iozhnbpsdcwwjw Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales / Transfer conditions: • Dismantling, removal and transport are the responsibility of the buyer and at his own risk. • The buyer provides personnel, tools and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly.

Condition: used, Oscillator tubes (triodes) for HF Welders : - BW 1608J2F-R, made E.E.V. : NEW - BW 1185J2, made E.E.V : Todevtp Huopfx Aklja

Year of construction: 2007, condition: used, THERMATOOL High Frequency Welding CFI 350 kW VF Tedpsymadbefx Aklea Including selectable frequency, in steps of 1kHz, range 180-300 kHz Fully revised in 2026 by Thermatool specialists Technical specifications · Input voltage: 3 x 380 V · Input current: 525 A · Welding frequency: 180 - 300 KHz · Output power: 350 kW · Auxilirary service voltage: 24Vdc · PLC Siemens S7 1. DC Power supply • SCR Power Controller/Stabilizer - Provides constant output power for consistent weld quality. • Rectifier Circuit achieving 6 pulse Rectification. • Solid State Low Ripple Filter - Reduces AC line harmonics and switching transients that can affect weld quality. • AUTOMATIC SPEED POWER CONTROL Automatic Speed Power Control - Automatically ramps power up and down in line with mill speed, minimizes scrap on stopping and starting. • PLC - Controls and monitors welder operation sequences and provides fault and running data for the Alphanumeric display 2. CFI 350KW VF Solid-state HF welder • Compact rugged enclosure - sealed and internally cooled. Provides small footprint whilst ensuring reliable performance in harsh mill environments. • Water cooled high frequency MOSFET power transistor modules – Modular design provides maximum flexibility, long equipment life and reduces time for maintenance. • AUTOMATCH Automatic Load Match – Fully automatic series and parallel load matching system which enables the welder to run at optimum efficiency with guaranteed frequency stability - Assists the tube producer in maintaining repeatability. • High frequency capacitor bank - Designed specifically for the Tube Welding application. Capacitors deliver high power with low voltage to minimize flashovers at the induction coil. • Water flow and temperature protection. • Output bus-bar system - Externally water-cooled for ease of maintenance. INCLUDING SELECTABLE FREQUENCY Selectable frequency, in steps of 1kHz, range 180-300 kHz 3. Remote control console • Display - provides operator and maintenance personnel a constant display of fault and running data for maximum productivity. • Power Control - Preheat and Main power potentiometers ensure precise setting of weld power and minimizes un-welded tube thus reducing scrap. • Pushbuttons and Control Switches - For safe simple operation and protection of plant personnel. Analogue Indication Meters - Provide back-up for Alpha Numeric display. 4. Closed loop cooling system • Plate Type Heat Exchanger - High efficiency reducing raw water consumption. • Stainless Steel Water Pump & Plastic Pipework • Automatic Temperature Control Valve - Maintains a constant water temperature thus avoiding condensation inside the equipment. • Header tank with Level Switch. Comprehensive equipment inspection, supervised by a Thermatool specialist. Input voltage: 3 x 380 V Input current: 525 A Welding frequency: 180 - 300 KHz Auxilirary service voltage: 24Vdc PLC: Siemens 7

Condition: good (used), Year of construction: 1994, Max pressure space : L 1900 x H 1800 mm Tjdpfx Akszi Hpujlsa Incl. OBEL-P High Frequenz unit. Chair seat bending : 3-4 min. pr cycle. Still connected to power. Can be examined in working condition. 1). 3D pressure can meet different shapes of plywood bending requirement and help customer develop more designs. 2). HF heating is dielectric heating. It heats products by friction of water melocules, fast, uniformly and effective 3). HF power is selective heating. It focus on glue heating but not heat the wood material, saving energy. 4). High quality. After pressing, plywood shape is steady and hard to change. 5). HF bending press can work with metal mold, plywood mold as well as MDF mold. There are more choice for end user. Customer can make mold themselves easily. 6). HF power needs only electricity, clean and dust free.

Condition: excellent (used), functionality: fully functional, Year of construction: 1988, loading capacity: max. 3.000 Kg. Tsdpfx Astzwxwskloa table diameter: 1.600 mm strip metal width: max. 150 mm

Year of construction: 2016, condition: used, THERMATOOL CFI 200 HF Welder for tube production, 200 kW solid-state high frequency welding system, manufactured in 2016. THERMATOOL CFI 200 HF Welder, designed for reliable high-frequency welding applications with advanced automatic load matching AUTOMATCH and THERMAVIEW remote control. With interconnecting cables, it is ready for re-installation. In excellent worling conditions. TECHNICAL SPECIFICATIONS - Manufacturer: THERMATOOL - Model: CFI 200 - Year: 2016 - Continuous Output Power: 5 - 200 kW - Nominal Welding Frequency: 400 kHz - Total System Power: 307 kVA - Input Voltage: 400 V - Input Frequency: 50 Hz - Input Current: 464 A - Control Voltage: 110 V SCOPE OF SUPPLY HF CABINET - Compact Rugged Enclosure Design - Water Cooled High Frequency Power Transistor Modules - High Frequency Capacitor Bank - Single Axis Table. - Water Flow and Temperature Protection - ‘Automatch’ - Automatic load matching system - Output Weld Lead Assembly DC CABINET Power Supply - SCR Power Controller/Stabiliser - Solid State Low Ripple Filter - Automatic Speed Power Control - Heavy Duty Power Transformer THERMAVIEW Remote Control Console - PC Panel with Thermaview software - Power Control - Pushbuttons and Control Switches - Analog Indication Meters Todezi Twropfx Akloa OUTPUT BUSBAR - Straight output busbar CABLES / PIPING - Existing interconnecting cables - Existing distilled water interconnecting piping WORKCOILS - 5 workcoils in the range 25 – 76.2mm BENEFITS ✓ Solid-state technology for reliable operation ✓ Automatic load matching to optimize welding performance ✓ Integrated THERMAVIEW control for convenient operation and monitoring ✓ Suitable for a wide range of tube diameters with five included work coils ✓ Designed for efficient production and dependable welding performance For more information, contact Continuous Output Power: 5 - 200 kW Nominal Welding Frequency: 400 kHz Total System Power: 307 kVA Input Voltage: 400 V Input Frequency: 50 Hz Input Current: 464 A Control Voltage: 110 V

Condition: used, Späneförderband / Waste Conveyor Busch KF 110-80 HF 35 Baujahr / Year 2000 Förderhöhe / Conveying height 1100mm Schüttlänge / Length of delivery chute 800mm Todpfsvkuqmsx Akloa Fördergeschwindigkeit bei 50Hz / Conveying speed with 50Hz 0,40m7s Gewicht / Weight 94kgs Waste Conveyors on Saddle-Stitchers, Perfect Binders, Three-Knife Trimmers Späneförderbänder an Sammelheftern, Klebebindern, Dreischneidern Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 1978, grinding length 500 mm grinding width 200 mm Tjdozbczrepfx Aklja

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Todpfx Akot Hwzieloa Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 400 h, load capacity: 4,500 kg, lifting height: 10,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 10,300 kg, total length: 5,040 mm, drive type: Diesel, construction width: 2,350 mm, Rigid telescopic forklift Mast type: Telescopic Technical condition: New Front tires size: 500/70 r 24 michelin xcml Tedpfx Ajxfm Nyoklea Rear tires size: 500/70 r 24 michelin xcml

Condition: used, -type: HF 727091 -Shaft: Ø 25 mm, height of shaft axis 80 mm -Base plate: hole spacing 180/180 mm / M20 -Quantity: 1x bearing block available -Dimensions: 250/230/H115 mm -Weight: 8.8 kg Todpfx Akjuz Ia Holja

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 72 rpm -Power: 0.75 kW -Design: B3 Tsdpjckp S Ssfx Aklsa -Shaft diameter: 25 mm -Protection class: IP 54 -Quantity: 1 piece available -Dimensions: 530/200/H160 mm -Weight: 23kg

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor Tsdpfx Akeu Rv Rxeloa -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Type HF 08.2 -Power: 0.6 kW / 200 Hz -Speed: 1200 rpm -Adjustment ranges: see photos -Number: 2x milling unit available -Price: per piece -Dimensions: 530/490/H600 mm -Weight: 67 kg/piece

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor Tedpfx Akjchq Igjloa -Manufacturer: SEW Eurodrive, gear motor with brake -Type: R43DT90S4BMG/HF/TF -Speed: 97 rpm -Power: 1.1 kW -Design: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Brake: 20 Nm -Number: 5x engines available -Price: per piece -Dimensions: 570/280/H210 mm -Weight: 33 kg

Condition: used, -type: HF 727075 -Shaft: Ø 16 mm, height of shaft axis 70 mm -Base plate: hole spacing 165/150 mm / M16 -Number: 8x bearing block available -Price: per piece -Dimensions: 210/200/H100 mm -Weight: 5.2 kg/piece Tjdpfx Aksuz Iayolsa

Condition: used, Electric motor, three-phase motor -Electric motor: for gear motor -Type gear motor: FA60MT80N80N1/HF -Speed: 750 rpm -Shaft: Ø 12x20 mm -Design: B5 -Protection class: IP 55 -Dimensions: 355/213/H160mm Tjdjdkf I Hspfx Aklsa -Weight: 15kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 23/100 rpm -Power: 0.15/0.6 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 560/230/H200 mm -Weight: 30 kg Tsdpfec Uz Hzex Aklja