Used Walter 2018 Walter Helitronic Micro for sale (3,054)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring Crjdpjzu Aibefx Adrsh - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 150 mm, cutting width (max.): 600 mm, saw blade diameter: 425 mm, chain width: 600 mm, - Operating manual, CE - Year of manufacture: 2020 TECHNICAL SPECIFICATIONS: - Minimum thickness of processed beam: 50mm - Maximum thickness of processed beam: 150mm - Maximum width of processed beam: 600mm - Minimum length of beam: 1200mm - Diameter of lower spindle: 70mm - Maximum saw blade diameter: 425mm - Spindle motor power: 30kW - Feed drive motor power: 2.2kW - Infeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Outfeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Spindle motor speed: 1420 rpm - Feed motor speed: 1420 rpm - Upper sawdust outlet diameter: 200mm Csdpfxex Dkyyo Adrjrh - Lower sawdust outlet diameter: 200mm - Supply voltage: 3x400V, 50Hz Overall dimensions: - Length: 2980mm - Width: 1250mm - Height: 1670mm

Condition: used, functionality: fully functional, Walter HMC 500 WWM 5-axis tool grinding machine Cjdpfx Asz E N Upedrsrh A-axis: 750 mm X-axis: 290 mm Y-axis: 320 mm Z-axis: 660 mm Tool diameter: 200 mm The machine is equipped with linear scales on 3 axes.

Condition: new, Year of construction: 2023, type of input current: three-phase, Walter TD500 KBA prism machine for sale. It was only unpacked for the photo and has never been operated. Purchased for a new production line that was never realized. Lower motor 22kW, upper motor 18.5kW. Can be tested on site. Cedpfx Adey Sw T Sjrsrh

Condition: excellent (used), functionality: fully functional, mileage: 622,000 km, power: 308.91 kW (420.00 HP), first registration: 09/2018, fuel type: diesel, axle configuration: 6x2, next inspection (TÜV): 09/2026, fuel: diesel, gearing type: automatic, number of gears: 12, emission class: euro6, loading space length: 73,000 mm, Year of construction: 2018, Equipment: retarder, Chassis (solo chassis) Euro 6 With TÜV (German technical inspection) valid until 09/2026 Tandem trailer, 18 tons, available at an extra cost Trailer: 7,900 EUR net Crsdpfx Aszxzbqodroh Technically sound and ready to drive.

Condition: used, machine/vehicle number: 516223L00150, Year of construction: 2022, operating hours: 828 h, load capacity: 1,800 kg, lifting height: 5,400 mm, fuel type: electric, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 5,400 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery voltage: 48 V Battery capacity: 625 Ah Battery voltage in idle state: 50.1 V Service valid until: 09/2027 UVV (German accident prevention regulation) valid until: 09/2027 Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,200 x 2,400 mm Own weight: 3,400 kg Operating hours according to display: 828 h EQUIPMENT Former Still full-service unit Free lift 3rd valve Side shifter White, non-marking tires LED work light, front LED work light, rear Safety light, front Safety light, rear Comfort seat Crodpoz Dfn Nefx Adrsh High-frequency charger, year of manufacture 2026 All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 93

Condition: used, Year of construction: 1998, Walter Heli-Power Production 5-Axis CNC Tool Grinder. Serial No. 6802 (1998). Country of Origin: Germany Credpfoz Ar Ebjx Adroh Centralised Cutting Oil Tank and Eclipse Automag Oil Filtration/Separation System (2016) Please note: This item will be awarded to the highest bid from Lot 1, Lot 1A or Lot 2 Location: These lots are located in Sheffield, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser

Condition: excellent (used), functionality: fully functional, empty load weight: 6,760 kg, maximum load weight: 11,250 kg, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, loading space length: 7,300 mm, Year of construction: 2018, Equipment: ABS, cooling unit, tail-lift, Equipped with Thermoking With TÜV certification Year of manufacture: 2018 Crodpfjy Urdksx Adrsh 18 tons gross vehicle weight

Condition: ready for operation (used), Walter Fielenbach - Centrifuge F25 -Payload: 25 kg -Drum volume: 35 liters -Drum wall: 3 mm steel -Speed: 980 rpm Crsdpfszta U Sox Adrsh -Motor power: 4.5 kW -Drive power: 1.5 hp -Material: SM steel Dimensions: L x W x H 0.9 x 0.9 x 1.2 meters / Weight 300 kg Errors and omissions excepted.

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Crsdpfx Adozmt U Eerjh

Condition: excellent (used), functionality: fully functional, mileage: 622,000 km, power: 308.91 kW (420.00 HP), first registration: 09/2018, fuel type: diesel, axle configuration: 6x2, next inspection (TÜV): 09/2026, fuel: diesel, gearing type: automatic, number of gears: 12, emission class: euro6, loading space length: 73,000 mm, Year of construction: 2018, Euro 6 compliant Valid TÜV (technical inspection) until 09/2026 Thermo-King T-1000R Tandem trailer with a maximum permissible weight of 18 tons available at an extra cost Trailer: €7,900 net Crodpfx Aoy Urcyedrsh Technically sound and ready for operation.

Condition: good (used), Year of construction: 1990, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) Cjdjz Atv Iepfx Adrerh • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, throat depth: 455 mm, total width: 860 mm, total length: 2,000 mm, total height: 2,050 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 2,000 kg, sheet thickness steel (max.): 4 mm, Number of strokes 150 / 300 / 600 Min. Maximum sheet thickness 6 mm Horizontal troath 675 mm Vertical troath 455 mm Max. thickness Stainles 4 mm Crjdpfx Adozxf Eysrsh Max. thickness Aluminium 8 mm Motorised ram adjustment 0 - 80 Power 4.5 kW Dimensions (Estimate) Length 2000 mm Width 860 mm Height 2050 mm Weight 2000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 2018, control type: manual, Equipment: documentation/manual, emergency stop, I have an Abus slewing crane for sale. The crane was in working order until it was disassembled. The reach from the pivot axis is 4135 mm, and the height to the hook is 3446 mm. It is sold without warranty or guarantee. Credpfx Adjz Ix Haoroh

Condition: excellent (used), Year of construction: 1988, total width: 810 mm, total length: 1,700 mm, total height: 1,700 mm, overall weight: 1,250 kg, Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T Number of strokes: 300 / 600Min. Maximum sheet thickness:4.0mm Horizontal troath: 460mm Vertical troath: 475mm Max. thickness Stainles:2.0mm Max. thickness Aluminium:5.0mm Motorised ram adjustment:0 - 60 Power: 3.0kW Length: 1700mm Width: 810mm Height: 1700mm Weight: 1250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Crsdpfx Ajzzmtksdreh

Year of construction: 1996, condition: ready for operation (used), Offered is a WALTER 5-axis CNC tool grinding machine for the production and resharpening of rotationally symmetrical cutting tools such as drills, milling cutters, reamers and special tools. Travels X/Y/Z: 400mm/250mm/580mm, C-axis swivel range: +/-200°, A axis: 360°, rapid traverse X/Y/Z: max. 15m/min, linear axis resolution: 0.0001mm, center height range: 130mm-165mm, max. workpiece diameter: 190mm, workpiece mounting: ISO 50, spindle motor power: 4.4kW, grinding spindle speed: 6000rpm, spindle diameter: 70mm, max. grinding wheel diameter: 200mm, control: WALTER HMC 400. Overall dimensions X/Y/Z: approx. 1420mm/2010mm/2150mm, weight: approx. 3100kg. An on-site inspection is possible. Codpfx Ajzpa Scedrjrh

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Heidelberg CX 75 - 4 + L – 2018 Year of Manufacture : 2018 Impression Count : 55 mio imp. 4 colors + coater offset press of size 53 x 75 cm (C-Size) equipped with: • PRINECT PRESS CENTER • EASYCONTROL (Color Measurement System) • AUTOPLATE (automatic plate change) • SPEED : 15.000 Sheets Per Hour • COATING UNIT with chambered doctor blade and Anilox Roller • High Pile Delivery • Infra-Red Dryer • Preset Feeder & Delivery (automatic Size Setting) • ALCOLOR dampening with VARIO Cjdpfxjz E N A Tj Adrerh • Technotrans Central Refrigeration CombiStar • Ink Temperature Control • ALL Automatic washers (blanket, rollers and impression cylinders) • Steel Plate in feeder and delivery (for pallets) • Chromed cylinders • Antistatic Device • Pneumatic compressor • Weko AP 262 Powder Spray • Air Cooled machine • Can print up to 0,8 mm This machine is in excellent condition and is available immediately. It can be seen running in one Print Shop in Germany

Condition: used, Year of construction: 2004, overall weight: 1,300 kg, hopper volume: 3 l, terms of delivery: FCA Pegnitz Csdpfxjz Iuape Adrsrh delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2018, overall weight: 600 kg, load capacity: 10 kg, terms of delivery: FCA Pegnitz Crodpfxsz Hfl Hs Adrsh delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Measuring gauge Manufacturer: Micro-Maag Model: B2 40-100 Stock number: (28690) Measuring range: 40 - 100 mm in 2 mm steps per test gauge 1 test gauge DM 74-76 mm is missing Very precise measurements possible, as measurement is taken at 6 points. Measuring depth approx. 800 mm Cjdpey Ipbmjfx Adrsrh Transport case dimensions: Width: 505 mm Depth: 340 mm Height: 260 mm Weight: 29 kg

Condition: used, Panning machine, Coating pan machine,Pralines and Drages, Used Machine Manufacturer: Walter Brucks Type: I Overall dimensions: 1200 x 1380 x 1800 mm Crsdpfx Aeypvhzedreh Weight: 280 kg Electrical data: 400 V, 3 A Pan size: 1200 mm Ø x 650 mm Pan opening: 740 mm Ø Capacity / mixing: approx. 150 kg

Year of construction: 2019, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 19/018, Dosing and bagging scale for solids and powders: Cedpfx Asz Ehm Rsdrjrh Dosing machine for solid and powdered products (from 5 to 1,000 grams of coffee). The product, stored in the buffer hopper, is automatically dosed by a two-speed vibrating channel into a weighing basket. The operator can control the dispensing of the dosed product into the container to be filled. It is possible to prioritize either dosing speed or weighing accuracy. The machine is supplied with various funnels of different diameters for powders or solids.

Condition: not inspected (used), Year of construction: 2000, Brand: Walter Model: Woodtronic CNC6F Year of manufacture: 2000 Sold as-is, machine for production or resharpening of the sides of carbide-tipped saw blades. - Diameter range: 80 to 800 mm - SIEMENS 840DI CNC control - CNC axes Siemens Simodrive 611 Cedpfxeytn Sye Adrorh - Automatic blade measurement and grinding wheel compensation - Variable spindle speed Images are for reference only.

Condition: excellent (used), Year of construction: 2004, operating hours: 53,676 h, machine/vehicle number: 730301, saw blade diameter: 810 mm, tooth pitch: 4 mm, grinding wheel diameter: 200 mm, total width: 2,074 mm, total length: 3,870 mm, total height: 2,725 mm, type of input current: three-phase, input current: 5 A, year of last overhaul: 2025, input frequency: 50 Hz, grinding spindle motor power: 1,500 W, input voltage: 400 V, overall weight: 2,200 kg, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, coolant pump power: 500 W, feed length X-axis: 350 mm, feed length Y-axis: 350 mm, feed length Z-axis: 250 mm, grinding spindle speed: 3,000 rpm, workpiece weight (max.): 2,800 kg, The machine is in working order and has a valid inspection certificate until 2025. It has been modified to work in conjunction with a Comat machine (an oil coolant cleaning system that manages 4 machines and contains 1100 liters of oil). It is also possible to switch to the internal 175-liter tank. The machine is also equipped with a filter to eliminate oil mist. Crjdpfx Aozyc Unjdrsh All work invoices for the machine, performed by Walter’s technicians, are available.

Condition: used, functionality: fully functional, - Polish production - DTR (Technical Documentation / Operation Manual) - Maximum length of processed material: 2800 mm Crsdoq Rc Rlopfx Adrjh TECHNICAL PARAMETERS: - Minimum length of cut prism: 600 mm - Maximum thickness of cut prism: 110 mm - Maximum width of input material: 450 mm - Maximum width of finished board: 150 mm - Minimum width of finished board: 70 mm - Saw blade diameter: 400 mm - Output capacity up to: 20 m³ - Power of right vertical spindle motor: 3.5 kW - Power of left vertical spindle motor: 3.5 kW - Rotational speed of vertical saw drive motors: 2850 rpm - Power of horizontal saw motor: 22 kW - Rotational speed of horizontal saw drive motor: 2850 rpm - Rotational speed of feed drive motor: 1450 rpm - Feed speed (stepless adjustment): 0 - 20 m/min - Supply voltage (50 Hz): 3×400 V - Machine dimensions (L/W/H): 7250 / 1700 / 1600 mm - Transport dimensions (L/W/H): 4700 / 2400 / 1600 mm - Machine weight: 1300 kg