Used Walter Heli-Power for sale (38,732)

Condition: excellent (used), Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, - Used continuous processing system (belt grinder) - The processing trough needs to be replaced. Blodpfx Aozqunzsblok

Condition: new, Year of construction: 2026, We have high-quality load banks from our series production for sale, with the following technical specifications: Condition: NEW Areas of application: - Load testing of emergency generators and uninterruptible power supply (UPS) systems - Grid stabilization through power consumption - Engine test benches Technical features: - Load type: Ohmic resistance - Voltage: 400V, also available up to 800V - Frequency: 50/60 Hz - Power factor: 1 - Power: - 250 kW - 500 kW - 800 kW - 1000 kW Blsdpfofm T Eujx Ablsk - 1500 kW - 2000 kW - Load levels can be set via any key combination - Test report printout - Test automation, automatic start of load levels Operation and control: - Directly via the keypad on the load bank - Via remote box (touch panel) - Via potential-free contacts - Optionally available with Modbus for integration into test automation Further features: - Lockable flaps/doors to prevent dust accumulation during storage - Compact design - Lightweight - Portable - Robust construction with container frame - Forklift slots and crane lifting device Includes electrical wiring diagrams Includes manual Includes software Delivery and commissioning possible for an additional charge.

Condition: used, machine/vehicle number: 15199, Year of construction: 2020, operating hours: 100 h, load capacity: 3,000 kg, lifting height: 4,000 mm, load center: 500 mm, fuel type: gas, mast type: simplex, construction height: 2,650 mm, fork length: 1,200 mm, Equipment: cabin, 4478840 Serial Number: 230302F7174 Bledpfxexz Sn Hs Abljk

Condition: used, Year of construction: 2019, Lifting capacity: 150 kg Please contact Gebrauchtgeräte Center for more information Bjdpfozpdraox Ablslk

Condition: used, Year of construction: 2016, Lifting capacity: 150 kg Bljdszm E Auopfx Ablek Please contact Gebrauchtgeräte Center for more information

Condition: excellent (used), Year of construction: 2012, WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm Bledpfxjmv Elpj Ablsk diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg

Condition: used, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 150 mm, cutting width (max.): 600 mm, saw blade diameter: 425 mm, chain width: 600 mm, - Operating manual, CE - Year of manufacture: 2020 TECHNICAL SPECIFICATIONS: - Minimum thickness of processed beam: 50mm - Maximum thickness of processed beam: 150mm - Maximum width of processed beam: 600mm - Minimum length of beam: 1200mm - Diameter of lower spindle: 70mm - Maximum saw blade diameter: 425mm - Spindle motor power: 30kW - Feed drive motor power: 2.2kW - Infeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Outfeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Spindle motor speed: 1420 rpm - Feed motor speed: 1420 rpm Bedpsx Dkyyofx Ablelk - Upper sawdust outlet diameter: 200mm - Lower sawdust outlet diameter: 200mm - Supply voltage: 3x400V, 50Hz Overall dimensions: - Length: 2980mm - Width: 1250mm - Height: 1670mm

Year of construction: 2014, condition: like new (used), WALTER TD500 KBA Sawmill - user manual - CE certificate – after technical review - very good condition – year of manufacture 2014 - feeding table standard 3m + 3m additionally = 6m Bedjmv Ekyjpfx Ablolk TECHNICAL PARAMETERS: main engine 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed adjustable on the inverter feed speed range 0 – 25 m/min feed motor 1.5 kW two rows of pawls disc diameter 500 mm spindle diameter 70 mm spindle support sawdust collection conveyor three pickup rollers spigot diameter 2 x 200 mm dimensions L/W/H 300 x 245 x 180 cm weight ~ 3000 kg

Condition: excellent (used), Walter+Bai LFV100-HH Servo-Hydraulic Universal Testing Machine Manufacturer: Walter+Bai AG, Switzerland Type: LFV100-HH Year of Manufacture: 2019 Machine Type: Servo-Hydraulic Universal Testing Machine / Material Testing Machine Testing Force: 100 kN For sale is a used servo-hydraulic universal testing machine from Walter+Bai AG, including hydraulic power unit PAC-40, PCS8000 Digital Controller, industrial PC, original Walter+Bai testing software, software dongle, GTM load cell, and extensive accessories. The system is suitable for professional tensile, compressive, material, and component testing in testing laboratories, research and development, quality assurance, and industrial production. The original Walter+Bai testing software, the corresponding software dongle, and the industrial PC are included in the scope of delivery. This provides a complete operating and evaluation system for the testing machine. Technical Data: Manufacturer: Walter+Bai AG, Switzerland Model: LFV100-HH Machine Type: Servo-Hydraulic Universal Testing Machine Series: LFV 100 kN Factory Number: 2279 Order Number: K25788 Year of Manufacture: 2019 Maximum Testing Force: 100 kN Control: Walter+Bai PCS8000 Digital Controller Digital testing machine control Original Walter+Bai testing software available Original software dongle available Industrial PC included in the scope of delivery Load Cell: Manufacturer: GTM Testing and Metrology GmbH Type: DR-F Measuring Range: 125 kN Sensitivity: 2 mV/V Serial Number: 68134 Year of Manufacture: 2019 Made in Germany Hydraulic Power Unit: Manufacturer: Walter+Bai AG Type: PAC-40 Factory Number: 2279-1 Year of Manufacture: 2019 Servo-hydraulic hydraulic power unit Water-cooled design Designed for continuous operation PCS8000 Digital Controller mounted Dimensions: Testing Machine (W × D × H): approx. 1,150 × 850 × 2,650 mm Hydraulic Power Unit PAC-40 (W × D × H): approx. 800 × 700 × 1,150 mm Bledpfxezlz Rxo Ablok Overall transport dimensions (L × W × H): approx. 1,600 × 1,100 × 2,800 mm Weight: Testing Machine: approx. 1,350 kg Hydraulic Power Unit PAC-40: approx. 250 kg Total weight: approx. 1,600 kg Shipping weight: approx. 1,850 kg Clamping System: 2 × mechanical wedge clamping heads Walter+Bai WGR-100-M Several sets of clamping jaws Clamping and mounting accessories as shown in the pictures Equipment: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Power Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × mechanical wedge clamping heads WGR-100-M Several sets of clamping jaws Handheld control unit Separate control unit with emergency stop Testing and mounting accessories as shown in the pictures Condition: Used Year of Manufacture 2019 Optical condition as shown in the pictures. Scope of Delivery: Walter+Bai LFV100-HH Universal Testing Machine Walter+Bai PAC-40 Hydraulic Power Unit Walter+Bai PCS8000 Digital Controller Industrial PC Original Walter+Bai Testing Software Original Software Dongle GTM Load Cell 125 kN 2 × mechanical wedge clamping heads WGR-100-M Sets of clamping jaws Handheld control unit Control unit Further accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel Bedjzl D Exopfx Ablolk - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, fuel: diesel, continuous power (apparent): 140 kVA, input frequency: 50 Hz, Emergency generator set Bjdpfsznh Rkex Abljlk Year of manufacture: 2024 – fully functional.

Condition: good (used), functionality: fully functional, Year of construction: 2013, load capacity: 200 kg, lifting height: 4,500 mm, platform length: 1,195 mm, platform width: 750 mm, overall weight: 485 kg, empty load weight: 285 kg, Power Towers Nano Vertical Manlift – Year of Manufacture 2013 – Used Blodjzmfrpopfx Abljk For sale is a used Power Towers Nano Vertical Manlift from the year 2013. This compact, self-propelled aerial work platform was specifically designed for work in confined indoor spaces and impresses with its high maneuverability, ease of operation, and low weight. It is ideal for maintenance, installation, electrical, painting, and renovation work. Technical Data: Manufacturer: Power Towers Model: Nano Vertical Manlift Year of Manufacture: 2013 Self-propelled Maximum working height: approx. 4.50 m Compact design – ideal for narrow passages and indoor areas Low weight – also suitable for sensitive floors The aerial work platform is in used, functional condition and shows the usual signs of wear and tear for its age. If you are interested or have any questions, please do not hesitate to contact us. An inspection can be arranged at any time by prior appointment. *Working Dimensions* - *Maximum working height*: 4.50 m - *Maximum platform height*: 2.50 m - *Platform dimensions*: 1.00 m x 0.73 m - *Footprint*: 1.19 m x 0.75 m - *Permissible load capacity*: 200 kg (1 person + tools) - *Max. manual force*: 200 N - *Max. slope during operation*: 0° - *Max. wind speed*: Only for indoor use, 0 mph - *Manual pushing force on level ground*: 9 kg - *Max. total weight including payload*: 485 kg - *Max. load at wheel contact point*: 180 kg (1.77 kN) - *Max. wheel force*: 1.75 kN *Dimensions in folded state* - *Length*: 1.195 m - *Width*: 0.750 m - *Height*: 1.560 m - *Weight*: 285 kg *Power Supply* - Standard 12V DC electric motor - Or 240V AC electric motor 13A connection - Or 110V AC electric motor 16A connection *Battery Charger - Technical Data* - *Input voltage*: - Single voltage: 90-135V AC (UK) / 180-265V AC (outside UK) - Dual voltage: 90-265V AC - *Frequency*: 45-65 Hz - *Output*: 12V DC, 7A - *Sound power level*: Less than 70 dBA - *Emissions EN 55014N, EN 61000-3-2*

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: F 3790, pressure: 23 bar, temperature: 221 °C, operating temperature: 221 °C, total height: 3,350 mm, total length: 7,512 mm, total width: 2,975 mm, tank capacity: 33,260 l, empty load weight: 35,100 kg, SUMMARY OF TECHNICAL SPECIFICATIONS General Data Equipment: Steam boiler (monoblock, 1-pass) Type: CR1 24000 X 23 Bars Manufacturer: ABB ALSTON POWER (Year 2000, CERNAY/France) Location: ETEX (Ottmarsheim) Application: Saturated steam generation for production Bsdszmfndjpfx Ablelk Pressure & Temperature Design / Operating pressure: 23.0 bar Test pressure: 34.5 bar Max. operating temperature: 221.8 °C Design temperature: up to 273.8 °C (depending on component) Dimensions & Volume Length × Width × Height: 7,512 × 2,975 × 3,350 mm Internal volume: 33,260 litres Heating surface: 700.9 m² Steam output: 24,000 kg/h Construction Horizontal cylindrical welded boiler Internal combustion chamber (smooth/corrugated) + tube bundle Weld joint coefficient: 0.85 (steel) Materials (excerpt) Shell & tube sheets: A48CP (comparable to P265GH) Smoke tubes: ST35.8 (comparable to P235GH) Flanges: BF 42 (comparable to P250GH) Welding & Inspection Welding processes: MAG, ASX, TIG (depending on component) NDT methods: visual inspection, radiography, ultrasonic testing (100 % of tube sheet connections) Qualification according to French regulation (Arrêté du 24/03/1978) Safety Valves 2 units, DN65, set pressure: 23 bar Certified flow rate: 27,845 kg/h each at 23 bar Special Features No post-weld heat treatment No expansion bellows or linings

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. Blsdpfxezlic Nj Ablok This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Year of construction: 2009, condition: ready for operation (used), - USED - ELECTRICAL AUTOMATIC PANEL BENDER FOLD LENGTH: 2150 mm MAX FOLD HEIGHT: 200 mm MIN LENGTH/WIDTH BETWEEN FOLDS: 160-350 mm TONNAGE: 32 ton CONTROL UNIT: SIEMENS 840D Blodpfx Absy T Szyolok WEIGHT: 30000 Kg OVERALL DIMENSIONS: 8500 x 7000 x 2850 mm ACCESSORIES: AUTOMATIC TOOL CHANGE ; MANIPULATOR ; REVERSE BENDING CYCLE ; SHEET METAL CENTERING SYSTEM NOTE: NO 2 ASP/700 CNC AUXILIARY AXIS; ADDITIONAL UPPER TOOL; LOADING/UNLOADING SYSTEM

Condition: new, Year of construction: 2026, Powered Load Moving Skates, compact built with low heights and capacities of 10, 24 and 40 tonnes. Intelligent Single-Joystick Control for all movements. Version with integrated lifting cylinder available as well as DUO controll for two powered skates. Please send us your request for a detailed offer. Bedpfxsgi Dm Ho Abljlk

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: GSEM2302014, overall weight: 4,900 kg, fuel type: diesel, tank capacity: 910 l, color: grey, output current: 630 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power (apparent): 481 kVA, continuous power (apparent): 350 kVA, total length: 4,300 mm, total width: 1,500 mm, total height: 2,300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: YUCHAI, type of cooling: water, Equipment: CE marking, type plate available, REM Power GSEm 350000 SDEW is a high-performance industrial diesel generator designed for professional use in environments where reliable power supply is crucial. This model offers a rated output of 350 kW, maximum output of 385 kW, rated current of 630 A, and operates at 400 V, 50 Hz. It is equipped with a 6-cylinder engine, water cooling, AVR system for automatic voltage regulation, digital display for voltage, frequency, and operating hours, as well as electric start with included battery. The built-in ATS (Automatic Transfer Switch) function ensures automatic generator start-up in case of power failure, with additional protection provided by a low oil pressure alarm. The large steel fuel tank with a capacity of 910 liters enables up to 13.5 hours of continuous operation. The generator features a 3-phase direct connection, dimensions of 4300 × 1500 × 2300 mm, and a total weight of 4900 kg, making it suitable for demanding commercial and industrial applications. ATS cabinet included. For sale: a professional diesel generator REM Power GSEm 350000 SDEW. The unit delivers a rated output of 350 kW and maximum output of 385 kW, operates at 400 V / 50 Hz, and achieves a rated current of 630 A. It is equipped with a 6-cylinder engine, water cooling, AVR voltage regulation, digital displays for voltage, frequency, and operating hours, electric start with included battery, and ATS function for automatic start-up in case of a mains power outage. The generator also features 3-phase direct connection. It comes with an integrated 910 L steel fuel tank, providing up to 13.5 hours of continuous operation. The overall dimensions are 4300 × 1500 × 2300 mm, with a total weight of 4900 kg. Manufacturer’s article number: 39350000502. Technical Data: Manufacturer: REM Power Model: GSEm 350000 SDEW Rated power: 350 kW Max power: 385 kW Rated current: 630 A Voltage: 400 V Blsdey Au Rijpfx Ablek Frequency: 50 Hz Engine displacement: 16,350 cc Fuel: Diesel Tank capacity: 910 L Continuous operation: 13.5 h Dimensions: 4300 × 1500 × 2300 mm Weight: 4900 kg

Condition: excellent (used), Rotary table, manufacturer: Walter Type: RT 630 MP Heidenhain digital display Resolution: degrees-minutes-seconds Clamping surface diameter: 630 mm Height in horizontal position: 180 mm Height between centers in vertical position: 460 mm Motor: 400 volts, 1300 rpm Rotary table speed: 1.37 rpm Transport dimensions: Length: 1050 mm Width: 500 mm (with pallet: 800 mm) Height: 1220 mm Weight: 915 kg Bodpfx Abszk A U Aslolk

Condition: good (used), Year of construction: 1996, Vibratory Finishing Bowl WALTHER TROWAL CD 200 with SM 200 control unit Year: 1996 Capacity: 200 L Bowl dimensions: Ø 1000 mm Width of the opening: 250 mm Maxi pieces height: 250 mm Motor: 2 speeds Motor rotation: 1450 RPM Bodpfx Aoznkmzeblslk 2 possible speed ranges: high speed + low speed Manual hatch Independent electrical panel Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1300 mm Weight: approx 600 kg Can be inspected under power in our warehouse!

Year of construction: 1983, condition: excellent (used), *complete with a RÖHM 4-jaw chuck diam. 200 mm Blodpfomrnkzsx Ablok Center hight: 160 mm

Condition: new, Year of construction: 2024, 5 Axes FSCUT 3000S CNC Control System Bledpjnr Hghofx Ablek DELTA Servo Driver & Motor System Hiwin Guide Liner SMG / KH Rack Raytools / BLT Series Cutting Head HanLi Chiller SMC Proportional Valve. Dairuike Auto Pneumatic Clamp φ220mm Various Diameter Wheels Pneumatic Support Loading Assist System Gross weight around 5.5ton

Condition: new, Year of construction: 2023, Laser source: Raycus 3 to 6kW Laser head: Raytools autofocus Structure: 2 horizontal chucks Loading: 6.5m unloading 2.5m Software: CAD CAM Tubest, Tube pro (Windows 10) Tube diameter: 15-230mm Tube profiles: round, rectangular, square Options: - 3 D swivel head - Automatic bundle loader - Table loader Bjdpfenkailox Ablelk - Conveyor unloader - Weld seam detection - Raybox - Extraction system

Condition: new, Year of construction: 2024, Basic configuration Laser source: Raycus Laser head: Raytool Autofocus Servo: Yaskawa System: FSCUT 5000 A Bedpfx Abjmx R S Nelelk Loading: manual Structure: 3 horizontal chucks CAD CAM: TubesT, TubePro Smoke extractor: Topsin 7.5kW with 6 filters Tube diameter: 15-350mm tube length: 0-4000/0-6000mm Maschinengröße: 13500x3400x2400mm

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Blodpfei Ar Ruex Ablsk Effective working area: 1520x3050 mm Max. positioning speed: 120 m/min Max. acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Max. table load: 1500 kg

Condition: new, Year of construction: 2022, Model DPL-1530HP-4 kW 8 levels, 3000x1500mm (300kg load per level) Loading and unloading system Laser Raycus 4 kW Control system FSCUT 2000ER Laser head Raytools BM115, autofocus Chiller Hanli 3.8 kW Air blower 11kW Nesting software Cypnest-Nesting Software Low-pressure gas alarm, gas pressure monitor, and software control Voltage stabilizer 48-72 KVA Bjdpfxjci Ik Se Ablolk Enclosure according to Laser Class 4 Heavy-duty machine base. High-performance servo motors. Intelligent cutting control system, easy operation Fast tack welding, supported by segment and step tack welding technology Specialized air duct with oversized diameter, ensuring smooth fume extraction. Completely enclosed design European CE standard Dual shuttle tables provide a high level of safety and convenience. Positioning accuracy ±0.05/1000mm Repeat positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. speed 120 m/min Sheet metal loading capacity 1500 kg Size 8907×2813×2658 mm Laser power 6000 W Control system FSCUT 2000 Machine power 32-48 kW Voltage 380V/50Hz Delivery time: 5 months (construction time + transport) Delivery to customer's premises: €3,500 Installation and training: €8,850 Industry 4.0 software: €9,500 FILTERCUBE 2H, 4.0 kW, 40 m²: €10,500 The Filtercube series is a dust extraction system equipped with filter cartridges, used for fume filtration and dust removal.