Used Weinig Planing And Moulding Machine With Feed Unit for sale (90,997)

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Gjdowm Iy Eopfx Afujkc Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: used, Year of construction: 2006, Record PANDA flow-packer with automotion in-feed system. In stock now, more information soon. Gsdpfxez Hq D Uo Afuekc More photos and full specifications: /

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 818745 / (PPS 2013- 001), This machine was updated in 2013 with a two-hand safety system. It is a semi-automatic machine that prints labels and presents them in a fixed position. The operator places the box in the fixture and presses the OK button with both hands for safety. Afterward, the label will be applied. The unit consists of an Allen printer 53XL80 and a table-top version – Herma 414 from 2011. The table height can be adjusted by pressing a button. The control system is integrated into the HERMA 400 labeler. Machine capabilities: Labeling of cartons. Output: max. 30 pcs./min. Size – Cartons (55 x 30 mm and 95 x 120 mm). Label specifications: Label size: 70 x 20 mm, 100 x 70 mm, 100 x 45 mm, 140 x 25 mm. Label specifications: Godezx D I Topfx Afuskc K: Core diameter 76 mm R: Reel diameter max. 300 mm B: Label width max. 160 mm L: Label length max. 800 mm Label winding outside.

Condition: used, Weinig Univar 10 automatic moulding machine for profiling and milling windows and doors, individual components and similar items with circumferential profiles, including a mechanism for single-person operation Units: Technical data: - 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, synchronisation device Gkedpfx Afsztv Eaeujc - 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic,

Condition: ready for operation (used), KUPFERMÜHLE DOMA-g-1620-V44 Four-sided planer with constant table height for varying wood thicknesses Working width max. 1620 mm Gksdpfezlbz Rex Afusc Planing height, 2 sides max. 300 mm Planing height, 4 sides max. 240 mm (OPTION: can be converted to 300 mm) Feed rate in 6 stages 4.5 - 26 m/min Total electrical power 91 kW 4 horizontal planing shafts bottom right 11.0 kW bottom left 15.0 kW top right 18.5 kW top left 18.5 kW 2 vertical milling units x 7.5 kW with mounted aluminum planing heads H 240 mm Machine mounted on a rotary bearing Wood widths up to 820 mm can be planed with energy efficiency with 1 motor at the bottom + 1 motor at the top good technical condition of the machine with functional guarantee year 1981 last inspection by the manufacturer in 2025

Condition: ready for operation (used), KUPFERMÜHLE – 2-sided Planer K43 Working width max. 420 mm Planing height, 2-sided max. 300 mm Feed rate 15 - 90 m/min Gkjdpjzmmrdjfx Afuoc Chip removal, lower cutterhead 15 mm Chip removal, upper cutterhead 20 mm Drive motor, lower shaft 15.0 kW Drive motor, upper shaft 22.0 kW Drive motor, scoring saw, top 7.5 kW Feed motor 7.5 kW Height adjustment 3.0 kW Total electrical power 55 kW Planer heads, aluminum, each with 8 knives D 200 mm 2 pcs Jointing device, bottom and top Overall length 2960 mm Overall width 1630 mm Table height, constant 800 mm Net weight 5300 kg Year of manufacture 1983 Last maintenance by the manufacturer 2024 Condition good This planer was originally purchased new in 1984 as a 4-sided machine. However, the vertical milling units have been removed and are no longer present. OPTION: Machine with 2 vertical milling units available at an additional cost. Machine is located in a soundproof cabin. L 3.8 x W 2.4 x H 2.6 m

Year of construction: 2006, condition: ready for operation (used), TETRA PAK ESL GABLE TOP FILLING MACHINE FOR 1000/500/300 ml WITH TWIST CAP APPLICATOR TETRA REX TR22 FILLER YOM 2006 ESL UNIT INCLUDED CAPACITY 2800 CARTONS PER HOUR 13.300 RUNNING HOURS Gsdpfx Aoz E U Dvsfujkc EXCELLENT TECHNICAL CONDITION

Condition: good (used), Code: 0234 Brand: SPANEVELLO - ITALY Model: SC 17 Automatic 7-spindle moulding machine for window frames, frames, profiles, joinery, carpentry, wooden packaging and various Technical data: Sturdy structure with electro-welded steel base Working width 170 mm Working height 120 mm Variable feed speed 5/25 mt/min Automatic lifting of upper beam Composition: 1° spindle: Surface planer - Motor Hp 4 2° spindle: Right vertical spindle moulder - Motor Hp 4 3° spindle: Left vertical spindle moulder - Motor Hp 4 4° spindle: Right vertical spindle moulder - Motor Hp 4 5° spindle: Thickness planer - Motor Hp 7,5 6° spindle: Right vertical spindle moulder - Motor Hp 4 7° Universal spindle 180° - Motor Hp 8,5 Diameter of shafts of working heads mm 40 Shaft rotations of working heads 6000 rpm Power of feed motor Hp 2 Gksdpfxjxukgus Afuec Suction inlet diameter 150 mm Overall dimensions mm 4800 x 1650 x 1450 h Weight kg 3000

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Gsdpfozrg T Esx Afujkc Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: new, Year of construction: 2025, Case Maker with Robotic Hand – High Efficiency Book Cover Machine We are offering a high-quality case making machine designed for the production of book covers, notebooks, and similar hardcover products. Equipped with a robotic hand, this machine ensures precision, consistency, and efficient handling during the production process. It is suitable for working with a wide range of materials, including gray board, MDF, wooden boards, mirror board, as well as various cover materials such as art paper, specialty metallic papers (gold/silver), fabric, and velvet. Ideal for print shops, binderies, and packaging manufacturers looking to improve productivity and product quality. Working speed: 15-28 pcs/min Godpfx Afey Dqx Sjuekc Max hardcover size: 460x300mm Min Hardcover size: 55x60mm Case Thickness range: 1-12mm Cover Thickness range: 100 -250 g/m2 Case materials range: Gray board, wooden board. mdf, mirror board Cover materials range: Art paper, Silver/gold paper, Fabric, Velvet Machine dimension: 1150x1500x1700mm Machine weight: 650kg

Condition: used, Standard tool set for edge trimming machine. Gsdpfxoz Dp H Nj Afuekc

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Gedpjzt Nbzjfx Afujkc Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: used, machine/vehicle number: 008403, Max. machinable height: 160 mm Maximum machinable width: 250 mm Max. forward feed speed: 24 m/min Operator shafts number: 5 Gkodpeykivhofx Afuec

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams Gjdpfxog Ailce Afuskc 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Year of construction: 1991, used Manufacturer: Casadei Type: FS 51 Year of manufacture: 1991 Machine no.: H 5884 Motor: 4 kW Planing width: approx. 510 mm Planing height: approx. 230 mm Table length: approx. 2200 mm Surfacing tables: can be tilted – complete Table lips: slotted Table lips: low-noise Motorized automatic brake Number of knives: 4 Safety knife shaft Table guide rollers: 1 x Feed rate: 8 + 14 m/min Digital display for planing height Godpfxjz Alb Ao Afuskc Electric height adjustment Dust extraction connection: D 140 mm Space requirement: approx. 2200 mm x 1300 mm x 1000 mm Weight: approx. 900 kg Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Gsdpfxeyyygkj Afuskc Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Power: 3,200 W

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale Gkedpfxoz N R U Hj Afusc The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Gkodsw Iddzjpfx Afusc Max. forward feed speed: 25 m/min Operator shafts number: 6

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Gkjdpfx Aoth Taajfuoc Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Inspection is very welcome.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Type: KF7 Year of manufacture: 1996 Format sliding table 300 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm Gkodpfxjz Eft Io Afujc 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Milling fence with fine adjustment Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm Gedpfx Asxdmgvsfujkc CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: used, Weinig Rondamat 929 knife grinding machine for the manufacture of profiled knives. Production from a straight blank or regrinding of used knives using a template. Gjdpfx Afozrx Hqoujkc Technical data: - Maximum grinding wheel diameter: 225 mm - Maximum tool diameter: 300 mm - Minimum tool diameter: 80 mm - Maximum tool width: 230 mm

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology Gkjdpfjwm Iz Nsx Afusc The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: like new (used), JBT Automatic Can Seamer with 48-Piston Filling Unit – Stainless Steel JBT automatic can seamer with a 48-piston filling unit, designed to integrate product dispensing and hermetic can sealing operations within high-production industrial packaging lines. The unit incorporates a 48-piston filling system, enabling continuous and synchronized dispensing before transferring the containers to the sealing section. Its configuration is specifically designed for installations requiring high production speeds, consistent filling, and reliable container sealing. The machine features a robust industrial design primarily in stainless steel, with a fully enclosed and protected work area to ensure safety during production. MAIN FEATURES -Manufacturer: JBT -Type: Filling + automatic can seamer -Filling unit: 48 pistons -Rotary filling system -Automatic and continuous dispensing -Automatic can feed -Synchronized transfer between filling and sealing -Automatic cap feed/positioning system -Mechanical hermetic can sealing -Continuous industrial operation Gkedpfxozbi Nie Afusc -Designed for high-production lines -Construction primarily in stainless steel -Complete enclosure of the work area -Access doors with inspection windows -Safety guards -Automatic lubrication/service system, depending on configuration -Integrable into complete filling and canning lines PROCESS Empty cans automatically enter the machine and are transferred to the rotary 48-piston filling unit. During their movement, the pistons perform controlled dispensing of the product into each container, providing a repetitive process suitable for continuous production. Once filled, the cans are synchronously transferred to the sealing section. The lid is positioned on the container, and the sealing system performs the mechanical seaming between the can body and the lid, resulting in a hermetically sealed container. The cans can then continue to: Can washers Inspection systems Weight checkers Detectors Autoclaves/retorts Pasteurizers Cooling systems Labeling machines Case packers Palletizers APPLICATIONS Particularly suitable for canneries and industrial food manufacturers who need to integrate filling and sealing in a high-capacity automatic line. Depending on the configuration, format, and dispensing system installed, it can be used for different food products packaged in cans, including products with liquid or semi-liquid components and other formulations compatible with the filling system. The JBT 48-piston unit is especially attractive for installations seeking high production capacity and simultaneous dispensing of multiple containers, immediately followed by automatic sealing. Machine available for inspection. Additional technical information, can formats, capacities, production speed, dimensions, additional photographs, or videos can be provided upon request.

Condition: reconditioned (used), functionality: fully functional, Spiralmixer Diosna SPV 240 AF with 2 bowls Gksdjx H Tr Hspfx Afujc - 240kg dough, - after recondition With Diosna bowl lift