Used Weir Submersible Pumps for sale (8,698)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total length: 9,250 mm, total width: 1,200 mm, total height: 2,200 mm, overall weight: 1,500 kg, input voltage: 415 V, input frequency: 50 Hz, 2021 Complete Coating, Breading and Battering line, suitable for poultry, seafood, red meat, plant-based proteins, and cheese products. This system comprises of the following machinery: Manufacturer - Jinan Hiwell. Date of manufacture - 2021. 2 x DJJ100-II Batter Mixers mounted on mobile frame, and each fitted with a Flat Vane Pump. Mixing vessel capacity – 100 litres (per unit). 1 x SJJ600-IV Batter Coating machine with recirculating pump. While the products pass through the batter shower on the conveyer, the underside of the products are coated by the batter stored in the tank; the topside is enclosed with batter by the batter weir fall. 1 x SXJ600-IV Breading/Flouring Machine. This works as a continuous, automated system that applies an even, uniform layer of dry flour or breadcrumbs to food products. As products enter the machine, they ride on a wire-mesh conveyor belt that passes over a bed of flour or breadcrumbs, coating the underside of the food. Heavy-duty air blowers and vibrators remove loose, excess flour or crumbs from the coated products before they exit the machine. An integrated screw and circulation system continuously gathers, sifts, and recycles the unused flour or crumbs back into the hopper to maintain high material efficiency. 1 x NJJ600-IV Tempura Battering Machine. This machine automatically applies thick or thin tempura batters to products through an immersive dipping process. As food moves along the line, it travels between an upper and lower mesh belt that completely submerge the product into a batter bath, ensuring 100% coverage. It is built specifically to handle the high viscosity characteristic of traditional tempura batters. You can easily adjust the gap between the upper and lower mesh belts to accommodate products of varying sizes and shapes. Kjdpfx Aiozvrfbs Rodr Output capacity – up to 500 kg/h (approx.), subject to the product, belt speed, coating pickup, and product spacing. Electrical requirements – all machines are rated to 415 V / 50 hz / 3 phase. Useable wire mesh conveyor belt width – 600mm wide. Total line/system footprint dimensions – 9.25m long x 1.2m wide x 2.2m high.

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump Kdjdpfey Ti I Rsx Ai Rer -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump -Type: MTH2-90/7 AWA-AUUV -Drive: 1.1 kW 2850 rpm -Max. flow rate: 2.5 m³/h -Max. delivery head: 64.6 m -Immersion depth: 250 mm -Dimensions: 230/180/H490 mm -Weight: 13.9 kg

Condition: excellent (used), Year of construction: 2022, Technical data: - Total filter capacity approx. 150 l/min - Filter fineness approx. 3 μm nominal - Dimensions (W x D x H) approx. 1400 x 1300 x 1100 mm - Tank capacity approx. 800 l Equipment: - 2 filter groups, individually backwashable, each with 1 TCF filter tower - 1 filter pump - 1 pneumatic unit - 1 manual sludge removal system with sludge bag - Internal system piping - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 unit of machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 70 l/min - Delivery pressure: approx. 5 bar - Drive: 400V, 50Hz 1 unit of cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 80-120 l/min - Delivery pressure: approx. 1.5 bar Kdsdpfx Aiezk Ek Tj Rer - Drive: 400V, 50Hz, IE3

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump -Type: MTH4-40/4 AWA-AUUV -Drive: 1.1 kW 2850 rpm -Max. flow rate: 4 m³/h -Max. delivery head: 36.9 m -Immersion depth: 200 mm -Dimensions: 230/180/H435 mm Kjdpey Tkazsfx Ai Rodr -Weight: 14.9 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: Kodpewh Rp Eofx Ai Rsdr - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: new, functionality: fully functional, DP Pumps DPVF40/2-2 | Multistage Vertical Pump No. 8 Ksdpsy I Dryefx Ai Rjdr Pump technical specifications: Brand: DP Pumps (DP Industries) Model: DPVF40/2-2 Type: Vertical centrifugal pump (CNTRFGL) Power: 5.5 kW Motor technical specifications: Model: DC3SIEK132S2A Rated power: 5.5 kW Rotational speed: 2,940 rpm (at 50 Hz) / 3,525 rpm (at 60 Hz) Supply voltage: 400 V (Delta) / 690 V (Star) Efficiency class: IE3 (89.2%) Protection rating: IP55 Insulation class: F The set consists of a high-pressure vertical centrifugal pump from the DPVF series and a matching high-power electric motor. These units are widely used in pressure boosting systems, water supply installations, and professional irrigation systems. The use of a high-efficiency IE3 motor ensures significant energy savings during continuous operation (S1 duty cycle). The vertical pump design allows for considerable space-saving in machine rooms.

Condition: new, Submersible slurry pump for drainage. Kodpfx Aezcpbzji Rsdr

Condition: used, Year of construction: 2022, Manufacturer: Deighton Model: Econoline 200 Year: 2022 Condition: Used Stock Number: 3405 Deighton forming machine Type: Formatic R2200 / 180 Serial number: R2200/22/10/368 Capacity: max 4400 products per hour Hopper: 20 litres Belt width: 120 mm Power: 230VAC, 1Ph, 50Hz, 0.75kW Dimensions: 1150 x 900 x 1500 mm Weight: 95 kg Deighton flattening conveyor Type: FL Kdodpfoznk Acex Ai Rjr Serial number: FL 16/04/036 Belt width: 175 mm Power: 230VAC, 1Ph, 50Hz, 0.18kW Dimensions:1450 x 650 x 1200mm Weight: 48 kg Deighton preduster Type: 200W Econodust M/C Serial number: ED 22/09/068 Belt width: 200 mm Power: 3 x 400V, 50Hz, 0.51kW Dimensions: 1600 x 950 x 1400 mm Weight: 140 kg Deighton battering machine Type: 200W weir Econorobe M/C Serial number: WER 22/09/067 Belt width: 200 mm Power: 3 x 400V, 50Hz, 0.88kW Dimensions: 1600 x 950 x 1400 mm Weight: 140 kg Deighton mixer Type: Batter mixer Serial number: M 22/10/073 Mixer: 200 litres Power: 230VAC, 1Ph, 50Hz, 1.5kW Dimensions: 1400 x 600 x 1250 mm With double jacket for cooling Deighton preduster Type: 200W Econodust M/C Serial number: ED 22/09/069 Belt width: 200 mm Power: 3 x 400V, 50Hz, 0.51kW Dimensions: 1600 x 950 x 1400 mm Weight: 140 kg Deighton tempura dipper Type: 200W dip-Econorobe M/C Serial number: ER 22/10/072 Belt width: 200 mm Power: 3 x 400V, 50Hz, 0.4kW Dimensions: 1550 x 750 x 1350 mm Weight: 130 kg Deigthon breading machine Type: 200W Econocrumb M/C Serial number: EC 22/09/070 Belt width: 200 mm Power: 3 x 400V, 50Hz, 1.7kW Dimensions: 1600 x 850 x 1800 mm Weight: 170 kg Deighton fryer Type: Econofry M/C Serial number: EF 22/09/071 Belt width: 200 mm Frying length: 1750 mm Heating: electric Power: 3 x 400V, 50Hz, 23kW Teflon infeed, hold down belt, inline filtration system, storage tank and pump, hoist system

Condition: good (used), Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Capacity: 3000 l/min -Pump length: 970 mm Ksdpfx Aiob A Nycj Rodr -Flange outer diameter: 245 mm -Flange inner diameter: 125 mm -Pump diameter: 210 mm -Weight: 180 kg

Condition: ready for operation (used), Sump pump, submersible pump, transfer pump, Brinkmann-Pumpen D-5980, used machine Manufacturer: Brinkmann-Pumpen D-5980 Type: TC250/720 Overall dimensions: 1180 x 230 x 290 mm Kjdpevgwqhefx Ai Rjdr Electrical data: 400V; 11.5A; 5.5kW; 2900 RPM Weight: 35 kg Capacity: 250 liters/minute

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, used wet polishing machine from PERS, model Vibra-Line B 150 l, with buffer tank, in combination with PERS dryer Vibra-Dry A 200 l - both demo machines Technical data / Vibra-Line B 150 l: U-shaped work container with automatic discharge Capacity (gross): 150 l Usable volume (depending on workpiece geometry and material): 80 l Year of manufacture: 2024 Diameter, external: 1,170 mm Height: 860 mm Lining in the bowl: 22 mm, yellow or brown PU Total weight (empty): 320 kg Drive power: 2.2 kW Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Control cabinet with touch panel and frequency inverter Buffer tank – 90 l: The compound (soap solution) itself flows through the filter basket into the buffer tank, from which a submersible pump pumps the water back to the rotary vibrator. Dimensions of the buffer tank (L x W x H): 700 x 400 x 460 mm 1 submersible pump and 1 filter basket (630 µm) are included Technical data / Vibra-Dry A 200 l: Corn/grain dryer with automatic discharge - vibration dryer Year of manufacture: 2024 Volume: 220 l Motor power: 1.5 kW Heating: 3 kW per element (PTI temperature control) Capacity, workpieces: up to 65 kg Capacity, corn: 25-35 kg Speed: 1400 rpm Heating effect: 6 x 1.5 kW Length: 1,141 mm Width: 1,200 mm Height: 905 mm Internal dimensions of the bowl: 240 mm Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Corn granule temperature: +30 to +50 degrees Digital temperature control pneumatically controlled outlet valve Kdjdpfx Aisy A N U Ao Ror For commissioning, 25 kg of corn kernels of type GM 16 or GM 20 must be used.

Condition: good (used), Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Performance: 41.6 l/sec -Pump length: 1550 mm Kdodpjb A Nx Tofx Ai Rer -Flange outer diameter: 250 mm -Flange inner diameter: 130 mm -Pump diameter: 175 mm -Weight: 235 kg

Condition: good (used), Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 8.2 kW Kdedpfeb A Nygjx Ai Rsr -Output: 1800 l/min -Pressure output: 2.5 bar -Pumping height approx. 25 m -Speed: 2900 rpm -Pump length: 1260 mm -Flange outer diameter: 220 mm -Flange inner diameter: 100 mm -Pump diameter: 170 mm -Weight: 150 kg

Condition: good (used), Underwater electric pump, submersible pump, well pump, deep well pump Kodeb A Nykjpfx Ai Rjdr -Drive: 8.2 kW -Output: 1800 l/min -Delivery head H: 25 m (2.5 bar) -Pump length: 1260 mm -Flange outer diameter: 220 mm -Flange inner diameter: 100 mm -Pump diameter: 170 mm -Weight: 150 kg

Condition: good (used), Underwater electric pump, submersible pump, well pump, deep well pump Kdsdjb A Nyaepfx Ai Rsr -Drive: 18.5 kW -Capacity: 3000 l/min -Pump length: 960 mm -Flange outer diameter: 250 mm -Flange inner diameter: 125 mm -Pump diameter: 210 mm -Weight: 170 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Refrigerant pump station, complete with a control cabinet, pumps, and connecting fittings. The entire unit is mounted on a steel platform. Kodezu R S Dopfx Ai Redr Available for sale as a complete set or in individual components. Pumps with a capacity of 60 m3/hour are also available separately.

Condition: like new (used), Multi-stage, submersible, self-priming centrifugal pump Type: MTR 20-19/6 A-W-A-HQQV Kedpfxsfz D Dns Ai Redr Product No.: A45937986 Dimensions: L 150 cm, W 30 cm, H 30 cm // approx. 102 kg

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 106546-11, total height: 3,550 mm, total length: 7,185 mm, total width: 4,720 mm, overall weight: 8,000 kg, The drilling method used by the deep hole drilling machine is single-lip gun drilling. Drilling Unit Information: - Number of spindles: 1 - Spindle speed, infinitely variable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Max. drilling depth: 1,000 mm (in one pass, no retraction required) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter / indexable inserts: 40 mm - Max. thread cutting: M27 - Milling material removal rate: 250 ccm/min Travel Paths: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steadies) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid System Information: - Coolant supply: deep drilling oil - Tank capacity: 1,200 liters - 1 x scraper-belt chip conveyor - 1 x screw conveyor system - 1 x hydraulic unit and pneumatic unit/equipment - 1 x central lubrication system - 1 x submersible pump: Pump delivery: 200 l/min - 1 x low-pressure pump: Pump delivery: 100 l/min Drive power: 2.2 kW - 1 x compact band filter: Filtration rate: 175 l/min For machining steel and non-ferrous metals Kdodpfx Aexdm Awoi Ror - 1 x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1 x air cooler (heat exchanger): 22.5 kW - 1 x oil mist extraction unit: Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with tool holder SK 40 Tool Changer Magazine comprising: - Tool magazine with intermediate gripper - Tool holder SK 40 - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Number of tool storage positions: 80 - 2 x swiveling tool steady rests for guiding and supporting long drilling tools, with automatic positioning to home position. Clamping Table with B-Axis and NC Rotary Table: - Length / width: 800 x 600 mm - B-axis: 360° - Positioning accuracy, B-axis: +/- 30 seconds - Table travel: 800 mm - Payload (centered): 1,500 daN Electrical Equipment Information: - 1 x CNC control system, Heidenhain iTNC 530 - 1 x drilling process monitoring - 1 x RENISHAW touch probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, saw blade diameter: 370 mm, CNC Mitre Circular Saw Full-Automatic with Microprocessor Control Details: - Frequency-controlled saw drive: 13-73 rpm - Modern microprocessor control - Max. saw blade Ø up to 370 mm Kdedow Uftqopfx Ai Rer - Mitre angles: 60° left and 45° right - Large chip drawer - Vise with double clamping arm for burr-free cuts - Vertical clamping cylinder - Automatic cooling with electric submersible pump Technical Data: Cutting range at 90°: Ø 120 mm or 180 x 100 mm Saw motor: 3.0 kW-400 V Working height: 925 mm Weight approx. 750 kg Air connection: 6 bar Dimensions (LxWxH): 3,300 x 1,250 x 1,400 mm Working height: 900 - 980 mm

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, power: 10 kW (13.60 HP), travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, number of slots in tool magazine: 18, table length: 800 mm, table width: 375 mm, controller model: SIEMENS 810 M, rotational speed (max.): 6,000 rpm, Control: CNC path control with SIEMENS 810 M display TECHNICAL DATA Travel range X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Table working area 800 x 375 mm Drive power 10 kW Speed range up to 6000 rpm Tool holder (DIN 69871) ISO 40 Automatic tool changer Number of tool positions 18 Max. tool diameter 150 mm EQUIPMENT/ACCESSORIES - Enclosure with electrically interlocked doors - Automatic tool changer ATC 18 - Spindle orientation - Coolant system with water tank and submersible pump, 2.5 bar - Chip tray - 2 mechanical/hydraulic vices, jaw width 125 mm Kodpfx Asuiyb Nei Rodr - 3D probe, mechanical with tool holder - Approx. 30 various tool holders, partly equipped with tools - Machine feet - Documentation included Max. tool length 210 mm Tool change time 3 sec Axis feed range 0 – 10,000 mm/min

Condition: like new (used), functionality: fully functional, fuel type: electric, overall weight: 900 kg, lifting height: 26 mm, drive condition: 100 %, Year of construction: 2025, hydraulic flow rate: 9,000 l/min, For sale is a new, unused, ex-display EVAK ETP submersible slurry pump, designed for pumping heavy and highly abrasive slurries. Kdjdpfxszlz T He Ai Rsr This pump offers an attractive price alternative to slurry pumps of a similar class offered by TOYO and Dragflow. It is designed, among other applications, for pumping mixtures of water with sand, sludge, gravel, bentonite, slag, coke, and other sediments containing heavy solid particles. It can be used for desilting tanks, cleaning sedimentation tanks, extracting aggregates and minerals, and in construction and dredging works. The pump is equipped with a mechanical agitator, which stirs up the material at the bottom and facilitates its transport to the impeller. The components most susceptible to wear – the impeller, the inlet plate, and the agitator – are made of high-chromium steel containing 24–28% chromium. The low-speed, six-pole motor, operating at 960 rpm, reduces the wear of hydraulic parts when working with abrasive materials. The pump has a closed impeller, replaceable wear plates, and adjustable clearance for the lower plate. Key parameters: Motor power: 37 kW Power supply: 400 V / 50 Hz Rated current: 71 A Maximum flow rate: up to 550 m³/h Maximum head: up to 26 m Maximum solid particle size: 60 mm Allowable dry solids content: up to 50% by weight Rotational speed: 960 rpm Motor insulation class: F Maximum medium temperature: 40°C Maximum immersion depth: 20 m Power cable: 20 m, H07RN-F Direct-on-line (DOL) starting or soft-start/inverter starting is possible. Factory-installed suction basket and agitator. Condition of the equipment – the pump is: new and unused an ex-display unit covered by a 60-day start-up warranty available for immediate sale.

Condition: new, Submersible slurry pump for drainage. Kedpfszcn Utjx Ai Rsdr

Condition: new, Submersible slurry pump for drainage. Kdsdpfx Aiszcpads Rer

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Kdjdpfx Aiow E H E Ro Ror Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: used, Vertical multistage high-pressure centrifugal pump KSB Type Movichrom N CN 3/10 2R Serial no. 1-P30-837561 Nominal flow rate max. 3 m3/h Nominal delivery head 70 meters = 7 bar Nominal speed 2900 rpm Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Pump construction in 10 stages - Pump elements made of stainless steel, pump base made of cast iron - Connection flanges DN 32 - Suitable for drinking water supply, irrigation and drainage Space required for pump L x W x H 250 x 220 x 830 mm Weight 38 kg Unused replacement pump from stock, as good as new Not a submersible pump or submersible pump Kdjdorl U S Espfx Ai Ror