Used Wema Probst Qf50 for sale (213)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 037611, Equipment: chip conveyor, documentation/manual, Offering a used Wemas Turn 400 in very good condition. Ljdpfxozav H Ej Amzehn

Condition: good (used), Year of construction: 2011, functionality: fully functional, controller manufacturer: Heidenhain, overall weight: 8,400 kg, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Wemas VZG 65A Year of manufacture: 2011 Lhedez Hx N Sspfx Amzen Heidenhain iTNC 530 control system 30-position tool changer, SK40 Coolant system with strip-type filter Chip conveyor

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Wemas Type: HITURN Year of manufacture: 1999 Machine number: 180 Machine type: Cycle lathe Control System Control system: Heidenhain Electrical Data Operating voltage: 380 V Frequency: 50 Hz MACHINE DETAILS Performance Connected power: 11 kW Dimensions and Weight Length: 3,000 mm Width: 2,000 mm Height: 1,800 mm Weight: 3,000 kg EQUIPMENT Tailstock Multifix tool holder Steady rest Lsdpfo Advbyox Amzohn

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC 620, table width: 560 mm, table length: 910 mm, overall weight: 4,500 kg, spindle speed (max.): 9,000 rpm, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, Manufacturer: Wemas Lhsdpfx Amjz R Amkozjn Model: VZ860Star Year of manufacture: 2009 Control system: Heidenhain 620 Travel distances XYZ: 860/600/650 Tool changer: 24 positions Spindle speed: 9,000 RPM Weight: approx. 4,500 kg Tool holder: SK40 Sale is only to commercial businesses, without warranty or guarantee. Free on board (FOB).

Condition: used, Year of construction: 2007, functionality: fully functional, • WEMAS TURN 400-52 • Year of manufacture: 2007 • Control system: FANUC 0i-TC • Programming system: Manual Guide • Max. turning diameter: Ø 484 mm • Max. turning length: 750 mm • Spindle bore: Ø 70 mm Ljdpfx Amjz Ip Nfezehn • Rapid traverse: 24 m/min • Tool turret: VDI 30 • Hydraulic chuck • Hydraulic quick-change turret Chip conveyor

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Ledpfxjqy E I Re Amzjhn

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 650 mm, controller model: HEIDENHAIN 530, table width: 710 mm, table length: 1,400 mm, overall weight: 12,000 kg, WEMAS VZ 1200 Lhsdpjx Emm Usfx Amzjn Due to company restructuring, we have for sale: HIGH-SPEED 3-AXIS MACHINING CENTER Manufacturer: WEMAS Model: VZ 1200 Control: HEIDENHAIN 530 Year of manufacture: 2008 Table size: 1400x710 mm Travel: X 1200, Y 750, Z 650 mm Max. workpiece weight: 1800 kg Spindle: HSK 63A 16,000 rpm Power S1/S2: 15kW/19kW Tool changer: 30 positions Workpiece probe: HEIDENHAIN Tool probe: HEIDENHAIN Chip conveyor Internal coolant supply (IKZ) The machine is in very good condition, serviced, and in continuous use.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints Lhedezu Ryhspfx Amzen - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: used, mileage: 1,001 km, first registration: 01/2020, empty load weight: 75 kg, color: yellow, driver cabin: other, gearing type: other, Year of construction: 2020, load capacity: 600 kg, Equipment: crane, Vehicle location: Bovenden. Design: Gripping range: 660 mm to 1,000 mm. Immersion depth: 300 mm. Load capacity: 600 kg. Weight: 75 kg. Immersion depth: 140/210 mm. Jaw length: 1,140 mm. Lhedpfjzcqzvox Amzon ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, length 1500 mm Ledo Adfp Tspfx Amzjhn width 700 mm height over floor 850 mm vice LEINEN 125 mm Plate thickness 50 mm

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, power: 8.75 kW (11.90 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, clearance between the columns: 800 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,200 kg, die cushion stroke: 160 mm, Hydraulic press PYE 25 S1M with ejector. Year of manufacture: 1987. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Working pressure: 16 MPa. Upper table: 450 x 360 mm. Lower table: 630 x 500 mm. Clearance: 800 mm. Cylinder stroke: 500 mm. Lsdstzwxdspfx Amzehn Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Lower ejector force: 10 tons. Lower ejector stroke: 160 mm. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Very good technical condition. The machine has undergone a complete overhaul. Machine can be inspected and tested under power.

Condition: used, mileage: 1,001 km, first registration: 01/1998, empty load weight: 360 kg, color: blue, driver cabin: other, gearing type: other, Year of construction: 1998, load capacity: 1,800 kg, Equipment: crane, Vehicle location: Bovenden. Opening width: 370mm - 1370mm! Complete with swivel head and upper suspension! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Ledpfx Amoi Rl Uaozshn

Condition: excellent (used), For sale: a robust WEMAS column milling machine, model FM23. Cast iron construction, very rigid, ideal for tool rooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital position readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant with a separate tank and pump. Vertical spindle with a precision collet and adjustable feed. Power supply: 3×400 V. The machine is complete, has undergone a recent inspection, runs smoothly, and is ready for testing under power. It shows normal signs of use – without any disqualifying play or looseness. Lhsdpoz Slaqjfx Amzen Included in the price: 3-axis DRO display, scales on the X/Y/Z axes, coolant tank and pump, hoses, power cable, work light. Additional information from the photos: “WEMAS” and “FM23” nameplates, spindle setting correction plate, DRO panel with mm/inch functions, ABS/INC, calculator. Working parameters, spindle taper, and speed ranges to be confirmed on-site – I can measure the table and X/Y/Z travels. Loading with a forklift is possible. I can assist with organizing transport.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 40 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 380 mm, oil tank capacity: 300 l, total length: 1,150 mm, total width: 1,750 mm, total height: 3,050 mm, overall weight: 3,200 kg, distance between stands: 800 mm, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Lhsdpfewbt Uqsx Amzjn Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 13,677 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total width: 2,650 mm, overall weight: 4,000 kg, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 20, product length (max.): 3,200 mm, number of axes: 4, This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details. • Machine ON time: 41,712 hours • Measuring system: Linear position measuring system in all three axes • Handwheel: Heidenhain HR 410 electronic handwheel • Tool changer: Included • Machine access: Side doors with windows (left and right) Additional equipment • Tool probe: m&h Inprocess 3D tool sensor (Type m&h TS35.10) • Workpiece probe: m&h Infrared workpiece touch probe (Type 25.00 SK40-02) • 4th axis: Walter CDS 22 motorized rotary table/indexing head with original control unit • Rotary table features: 3-jaw chuck, RS232 interface, digital angle input Technical Specification Taper Size SK 40 Lhsdpfx Asy Ifp Hjmzjn Through-spindle Coolant No

Condition: used, Year of construction: 2018, saw blade diameter 550 mm weight ca. 650 kg Under-table saw for aluminum and PVC Lsdpfjzvhm Usx Amzjhn Hydropneumatic saw blade feed Two-hand operation Minimum-quantity lubrication system Table rotates on both sides, with locking positions at +/-45° and +/-60° Mitre cuts up to 60° on both sides Full protective guard very good condition! The saw was rarely used; it served as a backup machine

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 6LUD00036, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, feed length X-axis: 620 mm, feed length Y-axis: 620 mm, feed length Z-axis: 460 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, torque: 108 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 350 mm, workpiece diameter (max.): 680 mm, workpiece weight (max.): 300 kg, total height: 3,400 mm, total length: 4,600 mm, total width: 2,700 mm, table width: 600 mm, table height: 755 mm, table length: 600 mm, table load: 300 kg, rotary table diameter: 600 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,303 h, coolant supply: 18 bar, distance table center to spindle nose: 50 mm, spindle motor power: 17,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Commissioned 4/2014 Table rotation, C-axis: 360° Table swivel, B-axis: -50° to +110° Distance from spindle nose to table: 150 mm Table clamping surface: Ø 650 Table load capacity, max.: 300 kg Table slots: 5 x 18H7 x 100 mm Centering bore: Ø 50 H7 x 30 mm Workpiece size, max.: Ø 520 x 330 mm Machine accuracy: VDI I DGQ 3441* Positioning accuracy: +/- 0.006 mm* Axis resolution: 0.001 mm* *determined at a constant ambient temperature of 20°C +/- 1°C Main spindle: Main drive, AC motor, direct drive Drive power (100% / 25% ED): 10.0 / 17.0 kW Speed range, stepless: 20 - 12000 rpm Spindle taper: SK 40 DIN 69871 Torque at (100% / ED): 63.7 / 108.6 Nm Axis drives: Axes X, Y, Z: AC motors Axes B, C: AC motors Travel speeds: Rapid traverse in axes X, Y, Z: 36 m/min Speed, max. B-axis: 25 rpm Speed, max. C-axis: 25 rpm Acceleration X, Y, Z: 6.5 m/s² Coolant system: External tool cooling via external nozzles Coolant tank: 280 l Operating pressure, external: 0.9 bar Coolant system, internal tool cooling DIN 69871 Form A Operating pressure, internal coolant supply: 18.0 bar Manual rinsing of the work area via an additional gun Standard accessories: - CNC control: Heidenhain iTNC 530, full simultaneous 5-axis version - Handwheel 410 (Heidenhain) - Digital axis drives - Digital spindle drive - Swarf conveyor with discharge height 800 mm • Spindle cooling – radiators – plate cooling for spindle motor - Full protective enclosure with cabin roof Tool magazine VZG 65 5A by Indunorm: Number of tools: 100, with a tool length of up to 320 mm / can be converted to 125 tools, then a tool length of only 200 mm is possible. Tool diameter, max.: 80 mm Tool diameter, max.: 130 mm (with free adjacent positions) Tool change with double gripper - Linear path measuring system in axes X / Y / Z (glass scale) - Direct encoder in axes B / C - Temperature compensation - IR measuring probe – 3D Software - Option - iTNC 530 Kinematic-Opt • Calibration software Internal tool cooling 18 bar • Coolant tank • Internal tool cooling: 280 L DIN 69871 Form A • Double-circuit filter • Switchable filter cartridges • Filtration rate: 10 µm Band filter system PRODUCTION - LINE - RT 100 Automatic pallet changing system Loading and unloading via a linear axis system: Handling data: Handling weight, max.: 100 kg (35 kg) Pallet capacity: 6 pallet positions up to 400 x 400 mm: Control: PLC control with integrated control cabinet incl. switching and control components incl. software for the automatic sequence Zero point clamping system 320 x 320 x 60 mm - Clamping via 4 clamping bolts - Axis distance: 180 mm - Clamping force: 4 x 12500 N - Repeatability: 0.005 mm Ledsz Diq Ujpfx Amzohn - Axial load, max.: 4000 kg • Zero point clamping plate 320 x 320 - Automatic door Interface for automation and clamping systems Universal interface for automatic pallet changing systems, force clamping devices and zero point clamping systems • for pneumatic clamping systems • 2-channel rotary feedthrough integrated in the table • Pneumatic lines led to the outside • Pneumatic maintenance unit • Control via M commands logical inputs and outputs prepared incl. 7 pallets 320x320 with 6 vices and one 3-jaw chuck !!without tool holders and without tools!! Machine ex works, without delivery and assembly, all information without guarantee, price plus statutory value-added tax.

Condition: new, Year of construction: 2015, Storage location number: 100636087 Transport dimensions (L x W x H): 0 x 0 x 0 Lhedpfxezkz Rpj Amzsn

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, pressing force: 10 t, stroke length: 400 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 500 mm, table length: 400 mm, ram plate width: 360 mm, ram plate length: 280 mm, clearance between the columns: 630 mm, total length: 1,300 mm, total width: 1,000 mm, total height: 2,350 mm, overall weight: 1,300 kg, Equipment: documentation/manual, PYE 10 S/1 hydraulic press with ejector. Year of manufacture: 1983. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 10 tons. Working pressure: 16 MPa. Upper table: 360 x 280 mm. Lower table: 500 x 400 mm. Daylight: 630 mm. Cylinder stroke: 400 mm. Downward speed: 100 mm/sec. Lsdpfx Aewb Dhnemzehn Upward speed: 450 mm/sec. Maximum force of the lower ejector: 4 tons. Stroke of the lower ejector: 160 mm. Power consumption: 5.2 kW. Weight: 1300 kg. Height: 2350 mm, Length: 1300 mm, Width: 1000 mm. Technical condition of the machine: very good. The machine has undergone a major overhaul.

Year of construction: 1988, condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm digital readout Heidenhain 3 Achsen Ledpfsqpl Uqjx Amzehn spindle taper SK 40 spindle turning speed range 50 - 2500 U/min table-size 650 x 375 mm weight of the machine ca. 1,5 t dimensions ca. mm

Condition: good (used), Year of construction: 2003, Vertical machining center Machine type: Wemas VZ 750 Control: Heidenhain iTNC 530 Year: 2003 SPECIFICATIONS Travel X-Axis: 750 mm Y-Axis: 500 mm Z-Axis: 500 mm Rapid motion: (X/Y/Z): 25 m/min. Max. revolution: 8.000 rpm Spindle power: 7,5 kW Tool: SK 40 Lhjdpfxsz Dkrye Amzsn Tool capacity: 20 Table size: 1.000 x 500 mm Max. Table Load: 400 kg Equipment Chip conveyor Internal cooling: bar Caliper: Nein

Condition: used, Year of construction: 1977, pressure 160 t throat 340 mm stroke 20-120 mm no. of strokes max. 45 Hub/min table plate 1000 x 720 mm ram surface 750 x 380 mm daylight 330 mm weight of the machine ca. 8,7 t Lsdpezwg Umefx Amzehn dimensions of the machine ca. 1270x2310x2595 m

Year of construction: 1980, operating hours: 7,663 h, condition: used, pressure 320 t throat 800 mm stroke 630 mm distance between table / ram max. 1000 mm ram head dimension 710 x 600 mm Ljdpfx Amod Ih Nrezjhn table-size 800 x 1200 mm work height max. 1015 mm quantity of oil 1100 l Number of working hours 7663 h weight of the machine ca. 15 t dimensions ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available.

Year of construction: 1982, condition: used, x-travel 970 mm y-travel 420 mm z-travel 430 mm Control Heidenhain TNC 135 Lhedpek H R H Ujfx Amzjn number of speeds 12 speeds 31,5-1400 U/min feed range lengthways and crosswise 8-2000 mm/min feed range - vertical 4-1000 mm/min rapid traverse longitudinal and cross 4 m/min rapid traverse Z-axis 2 m/min table-size ca. 1300 x 350 mm weight of the machine ca. ca. 3,8 t dimensions ca. 3050x2350x2320 mm

Condition: used, Year of construction: 2015, fuel type: diesel, weight max. in kg 2500 kg stroke 4150 mm load center 600 mm Ljdpfjt Symrjx Amzshn free lift 150 mm construction height 2814 mm fork length 1200 mm fork holder width 1150 mm Frame width 1050 mm daylight opening 110-1320 IK-IK mm