Used Widia Mit Feineinstellung for sale (7,210)

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Lrjdpjyxr T Tefx Akyjk Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 85-70, Self-cleaning overband magnet with frame. Suitable for conveyor belt width of 1200 mm. Working length 1470 mm x working width 645 mm. Lrjdpfsx Tid Eox Akyok

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Thickness planer PANHANS Type 425 510mm The machine is in very good optical and technical condition. It comes from an assembly company and has only seen minimal use; everything is in original condition, with no components repainted. The machine has only been cleaned. Fully functional in all respects. Lrsdpfx Aoxdu Tqskyok - Equipped with kickback safety device - The planer knives are very easy and precise to adjust. Setting gauges, which can be mounted onto the cutterblock, are included to ensure maximum precision. - Chips are efficiently extracted thanks to the enclosed system. - Four-knife cutterblock for conventional strip planer knives. - The thickness table is mounted on two trapezoidal spindles, ensuring stability and torsion resistance - With protective hood, which can be lifted upward - Maximum planing width: 510mm; maximum planing height: 250mm - We provide personal delivery and demonstration throughout Germany for €220. This eliminates any risk at purchase. Delivery to other countries is also possible on request. - Quiet operation in compliance with DIN 45635 - Highly effective feed rollers; infeed and outfeed rollers are made of metal, with adjustable pressure on both rollers - There are two support rollers embedded in the table, which can be brought up when needed (particularly helpful when planing moist wood) - User manual included - Feed speed: 7 and 14 m/min, powered by a separate gear motor - 160mm extraction port - Thickness table elevates electrically, with fine adjustment via handwheel - Planing height is easily and precisely read from a mechanical counter - Achieves an extremely clean finish - 5.5 kW motor ensures virtually fatigue-free operation - The machine comes fitted with four sharpened knives - Extremely robust and durable design, top workmanship and highest quality - Ready for immediate use - 380V, 5.5kW - Speed: 5000 rpm - Year of manufacture: 1989 - Weight: approx. 800 kg - Certified GS tested version - Optimal, simple, quick, and safe operation - Heavy, solid, and durable construction—simply indestructible

Condition: ready for operation (used), Year of construction: 2005, 0.33 l, pack of 24 0.5 l NRW 0.5 l swing top Lredoyry H Hjpfx Akysk 0.7 l

Condition: excellent (used), Buderus 455 kW. Oil emergency heating system. Low-temperature boiler, can also be equipped with a biogas burner. Ljdsx U Exuspfx Akyjrk

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available Lsdeyq Rdyspfx Akysrk The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: excellent (used), Year of construction: 2011, Cell with Kuka KR 180 grinding robot Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6300 kg - Dimensions of the cell: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) Belt grinding station BSS10 - max. belt dimensions 3500 x 30 mm - max. contact pulley diameter 200 mm - motor power 4 kW 2 x polishing stations, - polishing wheel diameter 350 - 600 mm Lrodpfeg Saqvox Akysk - power 5.5 kW Gripper change cabinet Belt conveyorInteroll Automation GmbH - Total length approx. 2000 mm - Belt width approx. 440 mm The price includes a complete concept as you can see on the video We have 4 such cells. It is possible to make every detail as you can see in the video

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC machining center • Homag BOF 321, year 1998 designed for the production of stairs and other components. • Homag PC83 control system • Working area X = 5,200 mm • Working area Y = 1,300 mm • Working area Z = 410 mm • Number of milling spindles: 2 • Milling spindle motors: 12 kW • Maximum speed: 24,000 rpm • Swivel arm: Yes • 4-axis machine • Tool clamping system: HSK-F63 • Two tool magazines: 12 tools each • Double working area • Number of operator consoles: 10 • Vacuum pump: 2 • Vacuum pump capacity: 100 m³/h • Safety device: safety mat • CE marking: Yes Ledpjx S Ewrsfx Akyjrk

Condition: used, Year of construction: 2014, operating hours: 10,000 h, functionality: fully functional, Extraction table from Pötter with connected extraction by Ruwac (Ex protection) Lrodewy Rurspfx Akysk

Condition: excellent (used), Interroll roller conveyor 0.99m with drive The Interroll roller conveyor element is in a very good condition. Furthermore, the roller conveyor has its own drive motor. Width: 400mm Length: 990mm Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. Lrodpfx Ajhvmi Tjkysk High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Lodpjykuh Nsfx Akyork Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) Lodpfoykuhcjx Akyork F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: N2104796, GEM F470 automatic cardboard box sealer with automatic LATCH LOCKING FOR CONSTANT CARDBOARD FORMAT incl. centering unit and PLC S7 Siemens control system BOX DIMENSIONS: - Length : min. mm. 150 - max. mm .600 - Width : min. mm. 100 - max. mm. 520 - Height : min. mm. 100 - max. mm. 670 TECHNICAL DATA: - SPS Siemens S71200 control - Centering unit infeed RCC500 - Drive & guide belts Vertical - Carton format setting Manual - Bottom & lid sealing unit - Standard version T22 / T23 - Tape width From 50 to 50 mm depending on the unit - Tension adjustable - Max tape roll diameter 360mm - Core tape roll 76mm Ledpfx Akeykugxsyork - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Consumption 0.25 kW - Degree of protection IP 54 - Working environment + 5° C - max. +35° C - Transport speed 22 mt/min. - Average production 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm. 2,470 x 990 x 1,782H - CE safety protection: side sheet metal covers with access door, supplemented with infeed doors L 850 mm, top and bottom cover. Illustration may contain options subject to surcharge

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm Lrjdpfx Akoykud Reyek 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: new, Face milling cutter (28465) Make Widia Ljderwfpxopfx Akyerk Face Mill M 640,Type 125 B 12 RS 60 HP 06D Diameter 125 mm 12 cutting edges new and unused in opened packaging

Condition: new, Copy and face milling head (28466) Make Widia Type M 100 Copy Mill D 63 OZ5 diameter 63 mm in opened original packaging Lrodpsrwfpfefx Akyok

Condition: like new (used), Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm -Adjustment: SK50 -Manufacturer: WIDIA -Type: 06306 Widax M30 -Number: 3x milling cutters available -Price: per piece Lsdpfx Ascwb Nfokysrk -Dimensions: 224/100/H100 mm -Weight: 5.6 kg

Condition: used, Dimensions: 600 mm x 380 mm x 220 mm Ledpolkckuofx Akyork - Control unit suitable for Weinig window machines. - 3 units available. Price per unit: €690.00 + VAT.

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing on three feet Lrjdpjhg Nk Dsfx Akyjk Tank diameter: 2250mm heatable/coolable double jacket Enamelled tank

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing on three feet Ljdpfohg Niqsx Akyjrk Tank diameter: 2250mm heatable/coolable double jacket Enamelled tank

Condition: not inspected (used), Volume: Approx. 5000 L Type: Standing on three feet Tank diameter: 2100mm Ledpehg Nlpefx Akysrk heatable/coolable double jacket

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Nedcon Type: NS The scope of delivery includes: 01x pallet racking beam, used incl. inner support bracket f. Chipboard thickness up to: approx. 38 mm Material color: orange Box profile: 110 x 40 mm Agraffe: 4HK (hook) Clear width: approx. 3,000 mm Lredpfxjt Et T So Akysk 02x safety pins, used Version: completely galvanized For securing the side rails against unintentional lifting out General information about the item: This item is only available for collection. Any additional transportation or shipment of this item is associated with additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x steel door, used Design: DIN - Right Material color: grey Total height: 2,210 mm Total width incl. frame: 750 mm Frame profile: RR 50x50 mm Total door height: 2,110 mm Total width door: 620 mm Door frame profile: RR 25x25 mm Mesh width: 105x22 mm Passage width: 645 mm Footplate dimensions: 140x50 mm Weight per unit: 25.76 kg Remark: Lever handle set and lock, as well as key are not included in the scope of delivery. Lodpfx Akjtp Hkajyjrk Currently available from stock: 25 pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Note: This is a used steel locker. Lrsdpowaa D Aefx Akysk Slight damage (e.g., scratches, dents, dirt, or similar) may be present. The scope of delivery includes: 1x Steel locker with sloping roof, used Material color: gray Door color: gray Number of doors: 2 with ventilation grille Door handle: Turn-lock lock Overall width: approx. 610 mm Overall depth: approx. 500 mm Overall height: approx. 1,895 mm Weight: approx. 50.0 kg Locker compartment layout per door: Door handle: 1x Turn-lock lock Compartment dimensions: approx. 285 x 490 x 1,600 mm (W x D x H) Clothes rail: 1x | approx. 280 mm Hat base: approx. 285 x 307 x 400 mm (W x D x H) Lockable with a padlock (Padlock not included) 1x Bench with shoe rack Dimensions: approx. 610 x 810 x 410 mm (W x D x H) Shoe rack dimensions: approx. 570 x 285 mm (W x D) Weight: approx. 15.0 kg Total dimensions: approx. 610 x 800 x 2,305 mm (W x D x H) Currently in stock: approx. 21 units. Your contact persons: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Year of construction: 1990, condition: used, functionality: fully functional, The machine is in good condition. The milling head is not included. The Wegoma feed unit with standard stand is also included. Ledpfx Akoyfxa Eeyerk