Used Wmw Niles Dh B/8 - 250X3 for sale (63,677)

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: B200x3x6 -TGL: 30-2332 -Chuck size: Ø 200 mm -Cone: Ø 104 mm -Hole circle: Ø 132 mm Bsdpfx Adsd R Edteijdc -Through hole: Ø 54 mm -Weight: 15 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Bdjded Tdz Hopfx Adioc -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Bdedpfx Aeb Enccodijc -DH250x3-III -TGL 30-2332 -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 140 mm -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 28 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm Bdodpfx Adod Inxgsisc -Short cones: 5 -Bolt circle: 105 mm -Weight: 16.2 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m Bedpsd It Ibsfx Adijdc -Through hole: Ø 54 mm -Weight: 12 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Cone: Ø 106 mm Bodpfx Aod E R Scodijdc -Bolt circle: Ø 133.4 mm -Through hole: Ø 54 mm -Weight: 15 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Bjdpfx Asd Irazsdiodc -Chuck size: Ø 250 mm -Short taper: 6 -Throughout: Ø 80 mm -Weight: 25.9 kg

Condition: used, Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 Bdsdpfedrwlxjx Adisc -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg

Condition: used, Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed Bdodpfxsd It H Re Adiec -Feed size: Ø 250 mm -Weight: 35.5 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck Bjdpfx Aded Ew Txoiodc -Chuck size: Ø 200 mm -Weight: 18 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Bdsdpfxed R Hrds Adioc -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg

Condition: good (used), Precision three-jaw chuck, chuck, faceplate, 3-jaw chuck -DHK: 200x3 -TGL: 30-2333 Bdsdpob A Rd Nefx Adiec -Mouth size: Ø 200 mm -Bakes: individually and fully adjustable -Interchangeable jaws -Through hole: 55 mm -Recess: Ø 160 mm -Quantity: 1x food available Price: per piece -Weight: 16 kg

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T Bdsdpfx Asxnpf Nedijc

Condition: used, Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Bodpoxuf Utofx Adiedc Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth: 2500 mm Total height: 2600 mm Weight: 4,5 T

Condition: not inspected (used), Year of construction: 1986, functionality: unexamined, 2 machines as spare parts donors. Servomotors MAIN SPINDLE MOTOR CHIP CONVEYOR CHUCK HYDRAULIC UNIT PRICE per ton Bdodpjixtm Nsfx Adijc

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Bedovbh N Rspfx Adijdc Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: used, Technical details: diameter: 250 mm passage: Ø 80,0 mm width: 80 mm weight of the machine approx.: 18,0 kg dimensions: Ø 250 x B: 112 mm three jaw chuck made of steel flange intake Ø 210mm with 3 pcs drill hole M12x44 Bjdpju Nla Hofx Adiedc incl. 3 set of 3 jaws *

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm center height: über Hinterschlitten: 138 mm Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min clamping diameter: 26 mm Bsdsvbhv Ropfx Adijdc range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Lathe chuck is cone disc Ø 200mm with MK5 Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Inverter FRENIC 5000G11 i.D. *

Year of construction: 2018, condition: as good as new (ex-display), GHIBLI DHR 8 is the standalone system for thermal weeding: the 100% ecological solution against weeds thanks to the action of high temperature saturated steam. Bdedsg A Rhkopfx Adijc Thermal weeding has many advantages for the environment and health as: • it uses only water • it is safe, even in close proximity to sensitive places such as kindergartens, schools, hospitals. • its use does not require prior notification under the legislation in the field; • it is safe for exposed workers, people and animals, during and after the treatments;

Condition: used, turning height: 1,400 mm, turning diameter: 4,000 mm, faceplate diameter: 3,500 mm, Technical data: CNC control Siemens 802 D Dead weight 66 tons Drive power 63 kW Installation dimensions 13,600x9,800x6,750 mm Face plate diameter 3,500 mm Max. Workpiece height 2,000 mm Max. Support adjustment 30 degrees Max. Workpiece diameter 4,000 mm Max. Workpiece diameter with side support 3,750 mm Number of supports 2 Max. Turning height 1,400 mm Max. Workpiece weight 25 to Max. Speed 30/min Bdodpfxju R Ezyo Adiec Min. speed 1/min

Condition: as good as new (ex-display), Year of construction: 2025, Power: 0.85, 1.5kW Bodpfx Ashpmbbedijdc Speed range: 300 - 4000 rpm Speed steps: stepless spindle mounting: MK-3 Drilling stroke: approx. 105 mm spindle throat: 200 mm Weight: 152 kg

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, table length: 10,900 mm, feed length X-axis: 10,200 mm, feed length Y-axis: 1,960 mm, feed length Z-axis: 1,850 mm, planing height: 1,850 mm, planing width: 1,750 mm, spindle speed (min.): 9,000 rpm, WALDRICH COBURG hydraulic double-column planer and grinding machine Control: conventional relay control Operation: original Waldrich Coburg main control panel with buttons, rotary switches, analog displays, and emergency stop Display / Positioning: 2 x HEIDENHAIN POSITIP digital position indicators / positioning aids on the main control panel Additional control units: Siemens SIMATIC HMI KTP700 / KTP400 for grinding support and grinding attachment Partial modernization 2021: approx. EUR 170,000 Ongoing modernizations / retrofits up to 2021 Retrofitted grinding attachment Modernized grinding support Siemens / Lenze drive technology Control cabinet and modernization documentation available Work area Largest planing width / clamping: 1,750 / 1,790 mm Largest travel height: 1,850 mm Total clamping area: 10,900 x 1,500 mm Additionally documented: 2 x 4,750 x 1,500 mm Usable table / length value according to drawing: approx. 10,200 mm T-slots: 7 pieces T-slot spacing: 210 mm T-slot width: 28 mm Smallest width of cross rail / traverse: 420 mm Cross rail / column / supports Number of cross rails: 2 Number of columns: 2 Cross rail horizontal travel: 1,960 mm Cross rail vertical travel: 250 mm Column horizontal travel: 550 mm Column vertical travel: 1,850 mm Support swiveling: +/- 60° Support folding: +/- 25° Speeds / Feeds Working speed: 5 - 60 m/min Return speed: 5 - 60 m/min Cross planer carriage vertical: 0.1 - 7.5 mm Cross planer carriage horizontal: 0.1 - 15 mm Column carriage vertical: 0.1 - 7.5 mm Column carriage horizontal: 0.1 - 7.5 mm Dimensions / Weight / Connection Space requirement: 22.67 x 3.97 m Height: 3.95 m Weight: approx. 51,872 kg Voltage: 500 V Fuse rating: 125 A Type of current: three-phase Frequency: 50 Hz Grinding support / grinding attachment Grinding support with grinding spindle Guideway system with base and Z-axis Y-axis grinding support converted to ball screw spindle 40 x 10 Pre-tensioned double nut Single-axis control for feed axis Angle gearbox motor 72 Nm Synchronous servo motor 11 Nm with absolute encoder Rittal compact control cabinet Grinding spindle / grinding wheel drive Siemens asynchronous motor grinding spindle 9 kW at 1,500 rpm / 57 Nm 10 kW at 1,750 rpm / 55 Nm Max. speed: 9,000 rpm Siemens SINAMICS drive technology Siemens SIMATIC control unit grinding support / grinding attachment Lenze L-force axis drive for Y-axis grinding support Separate control cabinets for grinding wheel drive and Y-axis grinding support Cooling / Hydraulics Schimpke DK150-V cooling unit Cooling capacity approx. 17.5 kW Cooling medium: oil ISO VG46 Gear pump approx. 135 l/min at 10 bar Pump motor approx. 5.5 kW Transformer 500 V to 400 V Separate hydraulic / unit block available Mechanics / Overhaul Partial overhaul of bed / table, crossbeam with slides Y1 / Y2, Z1-axis planer support and lubrication system Machine bed scraped Bed geometry created Table scraped Guideways reworked Slides Y1/Y2 scraped Strips coated and scraped Steel belt renewed Central lubrication system expanded Scrapers renewed Crossbeam lift repaired Worm shaft, drive shaft center, coupling pieces and roller bearings renewed Bellows X-axis renewed Condition / Equipment Bodey Ubn Sspfx Adisdc Column area newly painted Table and functional surfaces in very good condition Accessories, assemblies and spare parts available

Condition: used, mileage: 360,000 km, power: 338 kW (459.55 HP), first registration: 02/2013, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: beige, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), VOLVO FMX 460 8X4 FLATBED ? REAR CRANE HIAB RADIO REMOTE ? LEAF-LEAF SUSPENSION ? 10 M CRANE ? ----VEHICLE HISTORY ? VEHICLE HAS FRENCH DOCUMENTS ? VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT ? FLATBED ? REAR CRANE ? 8X4 DRIVE ? AUTOMATIC TRANSMISSION ? ENGINE BRAKE ? CRUISE CONTROL ? DIFFERENTIAL LOCK ? REVERSING CAMERA ? AIR CONDITIONING ? RADIO REMOTE CONTROL ? LEAF SPRING SUSPENSION ? TOOLBOX ? 1 X FUEL TANK CRANE ? HIAB XS 211 HIDUO ? RADIO REMOTE CONTROL ? MAX. LIFTING CAPACITY: 7.1 TONNES AT 2.5 M ? TOTAL REACH 10 M FURTHER DETAILS ? WHEELBASE: 5.70 M ? TYRE SIZE: 12R 22.5 Bdsdsy I Htmjpfx Adijc ? TYRES SAME ON ALL 4 AXLES ? TYRES IN GOOD CONDITION ? VEHICLE AVAILABLE IMMEDIATELY ? VEHICLE READY FOR OPERATION ? GROSS VEHICLE WEIGHT: 32,000 KG ? CURB WEIGHT: 17,428 KG ? PAYLOAD: 14,572 KG ----EXPORT / NOTICE EXPORT SALES ONLY WITH DEPOSIT (MIN. 500¤ – 2,000¤) EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ – 2,000¤ EXPORT DECLARATION EXW POSSIBLE WITHIN 10 MIN. (APPROVED EXPORTER STATUS). VEHICLE RESERVATIONS ONLY IN WRITING. ORAL AGREEMENTS NON-BINDING. SUBJECT TO CHANGE, ERRORS, AND PRIOR SALE. LEGAL NOTICE THIS ADVERTISEMENT DOES NOT CONSTITUTE A BINDING OFFER UNDER §145 BGB. IT SERVES SOLELY AS A BASIS FOR INITIATING CONTRACTS. ALL INFORMATION PROVIDED WITHOUT GUARANTEE. NO GUARANTEED CHARACTERISTICS. SALE IS EXCLUSIVELY UNDER OUR GENERAL TERMS AND CONDITIONS.

Year of construction: 2007, operating hours: 138 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 900K707385, Tablet Press PRESSIMA – as new, in ex-works condition Fully functional machine with complete documentation and software. Including multi-tip tooling set EU-D (5 × 4mm) (purchase price: €12,000, 6 months old) as well as a single-tip tooling set (5mm) EU-B. Both punch sets supplied by Ritter. The machine is equipped with an interchangeable turret. Both B- and D-type tooling can be used, in either EU or TSM standard. Operation • Suitable for small batch production • Main compression force measurement with digital readout on the machine panel • Digital display of parameters set via handwheels • Note: No automatic control system available Technical Data • Speed: 10–75 rpm • Max main compression force: 50 kN • Pre-compression force: 10 kN • Turret diameter: Ø 180 mm • Two-wheel feeder, variable speed • Drive motor: frequency controlled, 1.5 kW • Power supply: 400–480 V, 50/60 Hz • Total power consumption: 1.5 kW • Machine housing and press area: stainless steel • Press area unpainted, easy access, hard-nickel-plated surfaces • Central extraction port • Central manual lubrication pump for punches Bodpfxoy Hl Aqo Adijdc • Automatic lubrication pump for punches and guideways • Feeder motor integrated in the headpiece Mechanics • Handwheels for tablet thickness, main pressure, pre-compression, and fill • Rotary flap between fill tube and feeder • Solid pre-compression and main compression stations • Scrapers on upper and lower punches • Magnetic brakes on lower punches • 12 mm fill shoe as standard • Lower punch is lowered after dosing • Lower guideway and ejection rail easily removable • Machine status display on control panel Measuring and Analysis System • MS2300 for recording and analysis of up to 16 channels • Measurement/analysis of: o Main compression (upper) o Main compression (lower) o Pre-compression (upper) o Ejection force o Scraping force o Upper and lower punch displacement • Measuring amplifiers for main, pre-comp, ejection, and scraping force included Equipment / Features • Upper and lower punch shank bores with 4.8 mm keyways for guided tooling • Chamber-type feeder • Turret hard chrome plated • Main compression force measurement incl. indicator on operator terminal • Accessory kit type 8 MX: o 4 EU-B blank dies o 4 EU-D blank dies o 4 plugs for EU-B/EU-D or TSM-B/TSM-D Optional • Control retrofit with Siemens S7-1200 and Siemens TP panel possible.

Condition: used, machine/vehicle number: 007277, Max. panel width: 800 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg Bsdpfet H Tynsx Adiedc