Used Wmw-Dessau Double-Brush Deburring Machine for sale (72,570)

Condition: used, Technical details: grinding spindle speed: 1440 U/min voltage: 220 V / Hz total power requirement: 1,1 kW machine weight approx.: 75 kg space requirements of the machine approx.: L:0,4 x B:0,7 x H:1,15 m Chjdpsu Ng S Defx Ahmjc Polishing block stands on welded sectional steel base with foot plate (400x400x5mm) -wire brushes Ø 200x25mm each are mounted on the left and right -without sanding support -Protection class IP44 -Operation via ON/OFF switch *

Condition: as good as new (ex-display), Year of construction: 2026, Boschert brush deburring machine model K3 for deburring straight sheet edges and on the lateral aggragate suitable for cut-outs and notches up to 70 mm deep as well as outer radii on sheet metal. 3 motors á 1,5 kW brush diameter : 300 mm Material: wire brushes VA/steel Material range: 0.8-8 mm thickness Machine dimensions: Width: 1400 mm Height: 580 mm Depth: 670 mm Underframe: 800 mm high (working height 920 mm) Table support: 200x1400 mm Csdpfstr Avijx Ahmshc Hold-down device as sheet guide The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table support serves as a shelf

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 39.963TW, working height: 1,300 mm, planer shaft diameter: 60 mm, workpiece height (max.): 250 mm, workpiece width (max.): 300 mm, power: 18.5 kW (25.15 HP), A new two-sided planing machine is for sale! TECHNICAL DETAILS Processing: Two-sided planing (calibrating) Thickness tolerance: < ±0.1 mm Workpiece length min./max.: 800 / 3,200 mm Minimum length for continuous feed: 1,250 mm Workpiece width max.: 300 mm Workpiece height min./max.: 20–250 mm (each ±1 mm) Passage height: 280 mm Working height: approx. 1,300 mm Number of spindles: 2 Spindle diameter: 160 mm Planer shaft diameter: 60 mm Feed speed: 5–20 m/min, continuously adjustable Ram columns: 4 × Ø 110 mm MACHINE DETAILS Input voltage: 3 × 400 V AC Frequency: 50 Hz Network type: TNS, for industrial networks Control voltage: 230 V AC / 24 V DC Power: 18.5 kW Power of feed motor: 9 kW Compressed air connection: 8 bar Electrical equipment: Télémecanique / MOELLER / SIEMENS Machine color: RAL 7035 Light Grey / RAL 3003 Ruby Red Cabinet color: RAL 7035 Light Grey / RAL 3003 Ruby Red Cedpfxez A Ubij Ahmohc Total weight: 7,000 kg EQUIPMENT Continuously adjustable feed speed Feed rollers individually and directly driven by separate gear motors Electronically synchronized feed rollers Grooved feed rollers in front of the planer shafts Smooth feed rollers at the outlet Hard-chrome-plated tables, feed rollers, pressure elements, and stops Automatic feed deceleration in case of overload Processing motors with electronic soft start controls Integrated DC motor brakes Télémecanique ALTISTART Control panel on a pivoting arm on the front wall of the cabinet

Year of construction: 2024, condition: new, We are offering this new Machine Wala Enterprise MSA-2 double-die semi-automatic paper plate making machine, manufactured in 2024. Manufacturer: Machine Wala Enterprise Model: MSA-2 Year of Manufacture: 2024 Condition: New Chjdpfx Aoz E Damjhmoc Category ID: 691 Type: Double-die semi-automatic paper plate making machine If you have any questions or require further information, please send us a message or call us.

Year of construction: 2023, condition: used, Empty weight: 2.850 kg Dimensions (LxBxH): 203 x 247 x 209 cm Working height: 90 cm Serial number: FTR-15-1507 Power: 400 V/50 Hz Current: 32 A Power: 16 kW Maximum workpiece width: 1,500 mm Maximum height: 170 mm Minimum height: 0.6 mm Conveyor belt speed: 0.3 to 10 m/min Controls: touchscreen Machine dimensions: 2,037 x 2,478 x 2,090 mm Chjdpezyq Ivefx Ahmsc Conveyor working height: 900 mm Weight: 2,850 kg Hour meter: 2,989 New price in 2023 indicational EUR 195.000 Online auction of modern and very well maintained metalworking machines (e.g. 2023 BYSTRONIC BYSMART FIBER 3015 10kW laser incl. tower- and sheet storage modules complete, 2x 2023 BYSTRONIC XPERT PRO press brakes, 3x 2023 VALK WELDING incl. PANASONIC welding robots, Q-FIN deburring and finishing, KASTO automatic saws, SIEGMUND welding clamping tables, HAAS machine tools etc.), previously in use at Lemken, the well-known manufacturer of agricultural equipment - including plows and seeders - in Dinteloord, The Netherlands, due to the relocation of the manufacturing. The online auction opens Thursday 3 September and closes Thursday 8 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 6 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: new, diameter of brush Ø 250 mm width of brush 80.0 mm turning speed range 1450 U/min bore Ø 24.0 mm Wire thickness 0.3 mm Dust suction hood 50.0 mm voltage 400 Volt engine output ca. 3.0 kW weight of the machine ca. 90.0 kg range L-W-H 820 x 450 x 1140 mm The BES 250 D brush deburring grinder is ideal for deburring the inner and outer edges of profiles and flat materials. Thanks to its powerful drive motor and robust construction, this machine is ideally suited for professional use in workshops. Chedpfxoz D Itze Ahmsc Product Features - Ball-bearing-mounted rotor ensures smooth operation and a long service life - Ideal for deburring cut edges, removing rust from metal surfaces, . and removing paint coatings,... - Comes standard with a 50 mm diameter suction port for connecting to a . dust extraction system - Powerful and low-noise drive motor - Low-vibration operation thanks to a sturdy, torsion-resistant machine housing - Heavy-duty construction and high-quality components * Ideal for commercial and industrial use Scope of Delivery - Round wire brushes - Adjustable workpiece support - Base frame

Condition: used, Year of construction: 1995, Brush deburring machine with 2 different speeds, depending on material 1000 or 1500 rpm. Cjdpfx Aoz Hx Hkehmjhc

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: FTR-124-1217, total length: 2,150 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 3,750 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 25 kW (33.99 HP), workpiece width (max.): 80 mm, workpiece length (max.): 80 mm, input current: 50 A, This Q-Fin F1200 XL VAC machine is located in the showroom in Bergeijk and has only been used for demonstrations. The machine has therefore only been used for a limited time and can still be viewed and tested in our showroom while it is running. The F1200 XL VAC is a powerful, all-round finishing machine for deburring, rounding, and finishing sheet metal parts up to 1200 mm wide. Thanks to the combination of multiple processing stations, various operations can be performed in a single pass. The machine is equipped with a vacuum system that securely fixes the workpieces to the conveyor belt during the finishing process. The first processing station consists of a grinding unit. This removes burrs and irregularities from the product surface and prepares the workpiece for the next operations. Csdpjzzlqnefx Ahmehc Subsequently, the sharp edges of the product are processed by oscillating cup brushes. The brushes process the contours and recesses of the workpiece from different directions, ensuring that the edges are rounded evenly. Depending on the brushes used, the machine can also be used for removing oxide scale and reducing surface roughness. The XL version has an additional second grinding unit. This allows an additional finishing operation to be performed after deburring and rounding. All processing stations can be easily controlled via the HMI touchscreen. Various settings can be saved in programs, so recurring products can be quickly reset, achieving high reproducibility. The automatically adjustable stations also reduce manual settings and minimize the risk of setting errors by the operator. The F1200 XL VAC is suitable for processing, among other materials, stainless steel, aluminum, and steel, and combines deburring, edge rounding, and finishing in one machine. In addition, the F1200 offers the possibility of integration with ERP and handling solutions, so that the machine can also be incorporated into a further automated production process.

Condition: as good as new (ex-display), functionality: fully functional, Timesavers Series 10 The Series 10 features a pivoting head and a side for quick abrasive wheel changes. We use this side to remove spatter and high burrs. The second side has a mount for a flap brush, which is used for edge rounding and finishing. Due to the various tool options, the Series 10 is a true all-rounder and is suitable for deburring, edge rounding, finish sanding, and removing heavy scale. The 180° rotatable head allows for quick and easy tool changes. The machine is equipped with a vacuum system, and the motor speed is continuously adjustable. Chodpfjznlyvox Ahmsc The machine is extremely flexible, comes with rollers for easy movement, and its simple operation makes it a user-friendly machine that is accessible to everyone.

Condition: excellent (used), functionality: fully functional, Timesavers Series 22-1100-WTBTB The Series 22-1100-WTBTB, with a passage width of 1100 mm and a table opening of 0.8-100 mm, is ideally suited for processing laser-cut, stamped, waterjet-cut, or plasma-cut parts thanks to its 3 stations. The belt grinding station allows for the removal of burrs and raised edges. Subsequently, the edge is deburred and slightly rounded using the disc brushes. To achieve a uniform result, we have incorporated two oscillating brush stations in which the disc brushes rotate alternately to the left and right. Thanks to the quick-change system for the belt and brushes, the machine can be reconfigured in just a few steps. Codpjznlxrofx Ahmjhc The conveyor belt, as well as all other stations, are frequency-controlled, allowing for stepless speed adjustment.

Condition: used, Year of construction: 2023, max. wheel diameter 200 mm gear width 60 mm max. module 5 min. module 2 workpiece weight max. 6,0 kg Codpezy Satjfx Ahmehc total power requirement 4 kVA weight of the machine ca. 0,5 t dimensions 1,35 x 1,55 x 1,7 m Less used Gear deburing machine - 3-jaw chuck ZG 125 - One twist in 5- 120 sec. - After test maybe modil 1,25 possible - Working Unit 1, milling function - Working Unit 2, brush function - dust collector - automatic mode

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 1600mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 5,000 mm, total width: 2,200 mm, total height: 2,600 mm, overall weight: 8 kg, input voltage: 380 V, table length: 4,300 mm, table width: 1,600 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,600 mm, workpiece length (max.): 2,000 mm, table height: 1,000 mm, space requirement width: 300 mm, input current: 70 A, Core Advantages ✅ 1600mm ultra-wide processing width for large-size workpiece batch production ✅ 3-in-1 multifunction: deburring, chamfering and wire drawing, one machine for multiple uses ✅ Full-automatic one-pass processing, high efficiency and stable precision ✅ Wide adaptability for various metal materials and industrial scenarios ✅ Adjustable parameters to support customized finishing effects ✅ Heavy-duty structure, low failure rate and excellent cost performance Core Performance & Functional Features 1. 1600mm Ultra-Wide Working Width for High-Volume Production Featuring a full 1600mm effective processing width, this machine supports one-time integral finishing for large metal sheets and wide workpieces that traditional narrow-width machines cannot handle. It accommodates full-width continuous feeding as well as batch processing of small and medium-sized parts, delivering excellent production flexibility and strong compatibility. The optimized conveyor system ensures stable, synchronous workpiece transmission across the entire width, avoiding position deviation, incomplete finishing and inconsistent precision. It minimizes repeated clamping and positioning procedures, shortens production cycles, and is perfectly suited for mass processing of large-format sheet metal components. Chsdpsz Ii H Dofx Ahmoc 2. Full-Automatic Precision Deburring (Zero Burr Residue) Equipped with high-density flexible abrasive brush groups and multi-directional grinding assemblies, the machine provides dead-angle-free all-round deburring for upper surfaces, lower surfaces and cutting edges. It thoroughly removes hard burrs, flash, cutting slag and oxidation layers produced in metal cutting and stamping processes. Adopting intelligent adjustable speed and constant-pressure control, the system adapts to different metal materials and varying burr thicknesses for targeted finishing. It removes sharp edges completely without damaging workpiece base materials or original dimensional tolerance, delivering smooth, clean surfaces that meet strict industrial assembly and precision manufacturing standards. 3. Adjustable Precision Chamfering for Standardized Edge Finishing The equipment supports customizable edge chamfering and rounding treatment with freely adjustable angle and size. It achieves uniform, smooth chamfering on straight, curved and irregular workpiece edges, solving the inconsistency, low efficiency and poor precision of manual chamfering. The high-precision fixed-angle machining structure ensures identical chamfer accuracy for every workpiece. Optimized edge finishing removes sharp edges effectively, improving workpiece safety, assembly fit and surface quality. It is widely applicable for mechanical parts, hardware components, electrical enclosures, automotive sheet metal and general metal fabrication products. 4. Uniform Wire Drawing Finishing for Premium Metal Texture Built with a professional wire drawing module, the machine produces delicate, consistent and aesthetic linear textures on stainless steel, carbon steel, aluminum alloy, copper and other metal surfaces. It effectively removes tool marks, grinding scratches, oxidation traces and uneven surface flaws. Wire drawing depth and surface roughness are precisely adjustable to achieve fine straight wire drawing, matte wire drawing and customized surface effects.

Condition: good (used), Year of construction: 2013, functionality: fully functional, working width: 300 mm, passage height: 340 mm, Three-sided brush sanding machine / brush machine Manufacturer: Houfek Type: Twingo 300 Year of manufacture: 2013 Working width: 300 mm Passage height: approx. 340 mm 1x sanding brush unit, vertical, from the left, speed infinitely adjustable Csdpfx Aszg S Nzehmehc 1x sanding brush unit, vertical, from the right, speed infinitely adjustable 2x sanding brush units, horizontal, from above, speed infinitely adjustable Feed rate infinitely adjustable Machine weight: approx. 690 kg Includes various sanding and structuring brushes on a separate pallet.

Condition: good (used), Year of construction: 1997, functionality: fully functional, working width: 1,300 mm, passage height: 300 mm, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, the machine is in good working order and ready for use. Cjdpjy Tmqcjfx Ahmshc

Condition: good (used), Year of construction: 2016, operating hours: 715 h, functionality: fully functional, machine/vehicle number: 2530-01, working width: 900 mm, Due to machine rejuvenation, we would like to sell our barely used Timesavers wet deburring machine. Chjdsv Tnfiopfx Ahmec The machine is available for inspection and testing; it is live. Please contact us with any questions.

Condition: new, work piece width max 145 x 150 mm band speed 1.0 - 8.0 m/min workpiece height max. 100 mm total power requirement ca. 5.5 kW weight of the machine ca. 900 kg. dimensions of the machine ca. 1560 x 870 x 1920 mm Wide-Band Sander for Deburring and Rounding of Laser-Cut Parts - Includes Vacuum Work Table Description Technical Specifications: - Working width: 150 mm - Maximum workpiece height: 100 mm - Max. height adjustment: 100 mm - Complete finishing in a single pass - 1 grinding wheel - 2 disc brushes - Pressure rollers in front of and behind each unit - Adjustable feed speed - Fixed table, constant feed height - Vacuum table - Pressure of the brushes and grinding wheels adjustable . without opening the hood INCLUDED: DD UNIT: GRINDING WHEEL FOR DEBURRING - Working width: 150 mm - Motor power: 1.1 kW - Grinding wheel diameter: 250 mm INCLUDED: 2PTB UNIT: DISC BRUSHES FOR EDGE ROUNDING - Unit for rounding the edges of laser-cut parts Chedjzwxy Iepfx Ahmjc - Adjustable speed of the disc brushes - 1 brush rotates clockwise - 1 brush rotates counterclockwise - Brush diameter: 250 mm - Motor power: 2 x 1.1 kW INCLUDED CONVEYOR BELT - The conveyor belt is made of synthetic rubber - The belt has high adhesive strength to hold parts in place - The conveyor belt is oil- and spark-resistant - Transport speed: 1-8 m/min. INCLUDED VACUUM TABLE FOR SECURING SMALL PARTS - Installed as standard - Vacuum motor power: 2.2 kW - Minimum workpiece dimensions: 25 x 25 mm - Maximum workpiece dimensions: 145 x 150 mm GENERAL INFORMATION: - Mechanical measurement of workpiece thickness - Digital display of material thickness - Pressure rollers are spring-mounted - Fixed working height

Condition: ready for operation (used), Year of construction: 1962, functionality: fully functional, overall weight: 1,050 kg, input voltage: 380 V, type of input current: three-phase, For sale: VEB Schleifmaschinenwerk Berlin / WMW SI 40×70 cylindrical grinding machine, manufactured in 1962, serial number 1334/62, Made in Germany. The machine is complete and in working condition. The machine can be inspected and tested on-site before purchase. WMW / VEB Schleifmaschinenwerk Berlin is known for its robust industrial grinding machines designed for heavy-duty workshop and production applications. Technical data: Manufacturer: WMW / VEB Schleifmaschinenwerk Berlin Type: SI 40×70 Serial number: 1334/62 Year of manufacture: 1962 Country of manufacture: Germany Total weight: approx. 1,050 kg Electrical diagram: SI 40-007 Wiring diagram: SI 40-008 Power supply: 3-phase AC Frequency: 50 Hz Operating voltage: 380 V Chodpfxeznvqlj Ahmec Control voltage: 220 V Condition: Used, operational condition. Inspection and test run are possible before purchase. Transport: Transport can be arranged throughout Poland after prior agreement. Sales document: VAT invoice or receipt available. Contact: Please contact us to arrange inspection, collection, or transport.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2402-10, working width: 900 mm, overall weight: 4,000 kg, input voltage: 400 V, input frequency: 50 Hz, power: 20 kW (27.19 HP), workpiece width (max.): 900 mm, grinding wheel diameter: 1,100 mm, grinding width: 900 mm, Equipment: documentation/manual, We are selling our Timesavers 42-Series-900-WRD (belt sander + Scotchbrite deburring wheel) in a dry version. The machine is in perfect working order and is in very good condition, both visually and technically. Since our dry dust extraction system is permanently integrated into the building and will remain here, we are providing a BRAND-NEW 7.5 kW wet collector – this means the machine is immediately ready for operation without its own extraction system and is also suitable for aluminum/mixed material processing. Technical data: - Working width / conveyor belt: 900 mm - Belt sanding unit (W): belt width 900 mm - Scotchbrite deburring wheel (D): Ø 1,100 mm - Year of manufacture: 2008 - Serial number: 2402-10 - Connected power: 20 kW, 400 V / 50 Hz - Weight: approx. 4000 kg Scope of delivery: - Timesavers 42-Series-900-WRD - 7.5 kW wet collector, new/unused - New conveyor belt - Existing sanding belts - Documentation Availability: from mid-November 2026. Until then, the machine will be in production and can be inspected and tested with your own parts at any time while powered. Reservation possible with a deposit. Collection from Bodnegg (88285, near Ravensburg). Loading with a forklift is possible. Transport can be arranged upon request. Cedez Hifwspfx Ahmshc

Year of construction: 2022, operating hours: 1,500 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 0070, We are selling a virtually new vertical universal brush tufting machine. The machine was manufactured by WOMAtec in 2022 and has seen very little use. Technical specifications: Type: DANY 1.0 Stroke: 70 mm Filament length: max. 150 mm Filaments: synthetic, bristles, and natural fibers, wire filaments and abrasive filaments Filament box: 1 color, needle dividing system Tufting tool: none Performance: approx. 100 cycles per minute Operating mode: intermittent operation and continuous operation Operation via foot switch Cedpfxjzzwxwj Ahmehc Consisting of: ■ solid, welded steel frame ■ powerful main drive ■ wire spool and wire feed ■ filament box with pressure plate ■ durable tufting tool ■ loop tufting system with needle divider ■ adjustable table for flat brushes Table for cup or roller brushes available upon request ■ painted in Prussian blue RAL 5010, light gray RAL 7035

Year of construction: 2006, condition: ready for operation (used), A Bütfering metal deburring machine is offered for sale. Maximum working width: 1350mm, feed speed: 20m/min, processing stages: 3, 1st processing stage: abrasive belt, 2nd processing stage: 2 rows of cup brushes, 3rd processing stage: polishing belt, minimum and maximum workpiece thickness: 0.5mm/100mm, maximum material thickness: 100mm. Including one damaged conveyor belt and abrasive belts. Machine dimensions: 2000mm/2050mm/3400mm, weight: approx. 6000kg. Inspection possible by appointment. Codpozl U I Djfx Ahmjhc

Condition: good (used), Year of construction: 2000, functionality: fully functional, working width: 1,300 mm, passage height: 200 mm, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, the machine is in good condition. Chedpfxey Tm Alo Ahmec

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, For sale: Fenstek ADS550×5000 CNC-controlled double-head cutting saw from 2019 for the precise cutting of aluminum profiles. The machine is suitable for series production of profiles for windows, doors and facade systems. The two saw heads can operate independently or synchronously. The moving saw head is automatically positioned via a servo system. Key benefits: - Fully CNC-controlled - Two saw heads operating independently or synchronously Chedpfx Aex R U Epehmjc - Automatic servo positioning of the moving saw head - Automatic height measurement system for precise cuts below 45° - Touchscreen operation - Integrated label printer for product identification and traceability - Infinitely adjustable saw feed - Heavy and stable machine bed Technical specifications: - Power supply: 380–420 V / 50 Hz - Total power: 5.5 kW - Saw motors: 2 × 2.2 kW - Saw blade diameter: 550 mm - Maximum cutting length: 5,000 mm - Minimum cutting length at 90°: 360 mm - Cutting angles: 45° and 90° - Repeat accuracy: ±0.1 mm - Air consumption: 60 l/min at 0.5–0.8 MPa A complete double-head cutting saw for companies that want to process aluminum profiles quickly, reproducibly and accurately.

Year of construction: 2017, condition: used, Year 2017 Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale. Chodpfoz Ic Arjx Ahmoc

Condition: new, neu Chodpfx Ahowiryhsmjc ca. 10 Wochen ab Auftrags Italien 13600 € 261.12 € 1300 mm 150 mm 150 mm 250x350 mm 945 mm 0.75 kW 1400 mm 1000 mm 1450 mm 300 kg Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Properties: * The grinding pressure is applied manually. * When deburring from above, the workpieces are pressed onto the high-grip lid. * Fast processing, low costs The brush ensures the rounding of the edges of the workpiece. The standard brushes have a diameter of 150 mm. To deburr the product, use a support pad with a grinding disc. Depending on the height and hardness of the burr, you can set the grinding wheel at a slight angle to allow more pressure on the burr.

Condition: used, Year of construction: 2007, Used deburring machine FLADDER AUT-1000 VAC incl. vacuum pump and filter system Technical data: Year of manufacture: 2007 Manufacturer: FLADDER Chodjzy Uvkepfx Ahmoc Model: AUT-1000 VAC incl. vacuum pump and filter system Currently equipped with: - new brush set - complete maintenance incl. replacement of all oils - vacuum pump inspected and serviced The machine is powered and can be inspected by appointment! Working width: 1000 mm Long infeed and outfeed Fully functional with extraction system Belt and vacuum table were replaced 3 years ago The machine has only been used for less than one shift No known defects Connections: 3x 400V / 50Hz / 50 A