Used Yaskawa Mh-50-35 for sale (41,965)

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button Bodjyzr Nmspfx Aqwell • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, Milling machine Maho MH 500 E2 with Phillips CNC 432 control system. Fixed table, SK 40 spindle mount with hydraulic clamping. 16-position vertical tool changer. The machine has been standing idle for some time and has not been tested. It is being sold as defective. Bledpezvbkmofx Aqwsl

Condition: used, Year of construction: 1989, functionality: not functional, turning length: 600 mm, turning diameter: 350 mm, spindle bore: 105 mm, spindle motor power: 22 W, total length: 3,063 mm, total width: 1,660 mm, overall weight: 4,300 kg, Equipment: documentation/manual, The machine is not functioning due to a fault in the regulator. All the machine's mechanical properties are perfect. The machine is very rigid and can achieve tolerances as tight as 0.01 mm. Blodpfx Aqozwdamjwsl It can also be used as spare parts.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, load capacity: 35 kg, empty load weight: 570 kg, Equipment: documentation/manual, Welding robot with control cabinet & welding unit! TECHNICAL DETAILS Maximum payload: 35 kg MACHINE DETAILS Own weight: 570 kg Bjdsxnw E Repfx Aqwell EQUIPMENT Control cabinet Welding unit

Condition: used, Year of construction: 1994, functionality: fully functional, - Year of manufacture: 1994 - 1st owner, from own use - Fully functional, powered, ready for demonstration - X-axis travel: 200 mm - Z-axis travel: 1320 mm - Turning diameter: 350 mm Bsdpfxjxg A S Hs Aqwsll - Turning length: 1250 mm - Rapid traverse Z-axis: 15,000 mm/min - Spindle speeds: 25 – 2,500 rpm - Spindle bore: 105 mm - Spindle motor power: 22 kW - Control: Fanuc 0TF - Chip conveyor: Z-type Net price, unloaded ex-location Luckenwalde (Germany), without transport

Condition: ready for operation (used), Yaskawa CIMR-F7C4090 frequency converter SN:J00191129500002, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Blodpfx Ajzu Hx Hsqwsl

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, overall weight: 8,500 kg, controller manufacturer: FANUC, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DOOSAN DNM350/5AX was manufactured in 2017. It features a tool turret with 30 stations and utilizes BT40 tool holders. The machine is fully functional and has operated for 5500 hours. If you are looking to get high-quality milling and turning capabilities, consider the DOOSAN DNM350/5AX mill-turn centre we have for sale. Contact us for further details. • Tool holder type (tool turret 2): BT40 • Operating hours: 5,500 • Power supply: AC 380 V, 50/60 Hz Blodpozxy Ivefx Aqwjl • Rated power: 40,61 kVA • Transformer capacity: 5 kVA • Full-load current: 64,67 A • Short-circuit capacity: 10 kA Technical Specification Taper Size BT 40

Year of construction: 2013, condition: excellent (used), Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Bsdpfxsvr U Sys Aqwsll Currently is working.

Condition: used, maximum load weight: 28,240 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2013, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, Year of construction: 2013, Equipment: ABS, Air suspension, platform lift, MB window, EBS (Electronic Braking System), aluminum rims, outrigger supports, extension ladder, PVC half-shell fenders, folding UFS (universal frame system), tipper body made of HB 450 steel, 4 mm floor, 3.2 mm thick side walls, rear wall divided into 1/2 + 1/2, ladder and walkway, tarpaulin frame, load pressure gauge, 2 x warning signs, roll cover with central locking. Blodpfjzx I Epex Aqwjl

Year of construction: 2016, condition: excellent (used), functionality: fully functional, For sale the vertical glass washing machine QUARANTA S.r.l Type: LV 4 2000 3-50 Year: 2016 Very good working condition Working height 2000 mm, open-top , 6 brushes glass thickness: 3 - 50 mm Machine body in stainless steel, mechanical parts in aluminium, brass and galvanized steel. Drying by 4 blowers. Hot air. Soundproof built-in fan. Bsdpfx Aey Azi Esqwell

Condition: used, Year of construction: 2015, machine/vehicle number: MB536013A, functionality: fully functional, power: 28 kW (38.07 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, overall weight: 2,800 kg, We are offering this used COSTA MD5CC 1350 belt grinding machine, manufactured in 2015. Model: MD5CC 1350 Serial number: MB536013A Voltage: 400 V Bedszlcipspfx Aqwsll Frequency: 50 Hz Power: 28 kW Current: 54 A Year of manufacture: 2015 Total weight: 2800 kg If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2002, Control: Siemens Sinumerik 840D Center distance max.: 5000 mm Swing diameter over bed max.: 890 mm Turning diameter max.: 820 mm Spindle bore: 122 mm Spindle diameter in front bearing: 240 mm Spindle nose: A15 / DIN 55026 Main drive power: 80 kW (100% ED) / 105 kW (40% ED) Number of axes: 4 (X, Y, Z, C)C-axis: yes, max. torque 5000 Nm Tool system: Vert./Hor. head, Capto C8 (Sandvik) Milling spindle: 28 kW / 267 Nm (100% ED) Tool magazine: 100 positions, max. tool length 650 mm Travel X: -10 / +490 mm Travel Y: -130 / +300 mm Bledpfxszv Hw So Aqwsl Travel Z: +180 / +5038 mm Rapid traverse X / Z: 15 m/min, Y: 10 m/min Tailstock: yes, quill diameter 160 mm, taper MK 6 2 steady rests (one of them programmable) Chip conveyor and paper belt filter system Dimensions approx. (L x W x H): 16000 x 4900 x 3300 mm Weight approx.: 35.000 kg

Condition: good (used), Year of construction: 2018, operating hours: 11,000 h, functionality: fully functional, PELLE SUR CHENILLE HITACHI ZX 350 LC ANNEE 2018 11000 H Bjdpszxw H Aofx Aqwjll LARGEUR 3 M20 GRAISSAGE LIGNE BRH ATTACHE RAPIDE HYDRAULIQUE

Condition: used, Year of construction: 1991, operating hours: 2,000 h, Name: Used injection molding machine Manufacturer: Ferromatik Milacron (Klöcker) Type: FX50 R 35 Year built: 1991 Hours of operation: 2000 h Driving force: 15 kW Dimensions: L 4300 x W 1400 x H 2200 mm Bledpfxoxl R Sxe Aqwel Empty weight: 3400 kg Technical doc.: Yes Message: General Data: Dry cycle rate: 40 min, Pump drive: 15 kW, Total connected load: 25.7, Oil tank capacity: 180 L Injection unit: Screw diameter: 35 mm, Injection pressure: 1730 bar, Displacement: 116 cm3, Screw stroke: 120 mm, Maximum part weight: 99 g, Maximum injection flow: 505 g/s, Calculated injection capacity: 15 kW, Plasticizing flow: 29 g/s, Screw length: 22 LID, Maximum screw speed: 430 min, Maximum screw torque: 360 Nm, Installed heating capacity: 10.7 kW, Number of heating zones: 5, Nozzle compression force: 65 kN Clamping unit: Clamping force: 500 kN, Mold opening stroke: 350 mm, tool installation height min.: 200 mm, platen distance max.: 550 mm, ejector force: 34 kN, ejector stroke: 150 mm, clear distance between columns max.: 355×355 mm, clamping plate max.: 540×540 mm. Accessories: With two tool tempering devices. Condition: Second hand Price: By request

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. Blsdpfx Aezp Edwoqwol The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC machining center Hedelius BC 100 P-3500 Magnum Control system: Siemens Sinumerik 840D Year of manufacture: 2006 Internal machine number: 4 Location: Netherlands Travel ranges: X-axis: 3,500 mm Y-axis: 1,000 mm Blsdozw Dcnspfx Aqwsl Z-axis: 770 mm Clamping area: 4,150 x 1,000 mm T-slots: 5 pieces Distance between T-slots: 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Tool holder: DIN 69871 SK 50 Tool magazine: 50 stations Spindle speed: 20 - 4,500 rpm Accessories: - Automatic door - Operating panel - Machine hood - Chip conveyor

Condition: used, Year of construction: 1984, functionality: fully functional, Technical Data: Working Area X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Working Spindle Bodpfxjyzy Azj Aqwoll with rotary table Tool holder: ISO 40 Automatic feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 rpm, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Fixed table: 700 x 350 mm, 5 T-slots Fixed table: max. load 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Space requirement: 3200 x 4100 mm, height 1920 mm Equipment: - CNC control - Fixed table - Milling head swivels +/- 90° - Hydraulic clamping device - Coolant system - Emergency stop push button

Year of construction: 2011, condition: ready for operation (used), Various metalworking machines, including a larger Wagner radial drilling machine, are available. 1) Column radial drilling machine Wagner PRC 50, year of manufacture: 2011, drilling capacity (steel): 50mm, spindle stroke: 315mm, outreach range: 350mm-1600mm, spindle-base plate distance: 370mm-1270mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2500mm/1100mm/2900mm, weight: approx. 3500kg. The machine has an unknown defect. 2) Column drilling machine Alzmetall AX3/SV, year of manufacture: 2000, drilling capacity (steel): 32mm, spindle stroke: 120mm, outreach: 293mm, column diameter: 115mm, table dimensions X/Y: 515mm/360mm, speed: 2250rpm, weight: approx. 300kg. 3) 2x metal circular saw Macc NTM 350, year of manufacture: 1998/2010, saw blade diameter: 350mm, cutting capacity: 120mm, weight: approx. 450kg. 4) Belt grinding machine Grit A/S GIS 150, year of manufacture: 2014, belt dimensions X/Y: 150mm/2000mm, motor power: 4kW, weight: approx. 100kg. An on-site inspection is possible. A package sale is preferred. Blodpfey Eqtiox Aqwsl

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, • Realistic simulation of end products through the combination of different materials • Multi-material parts: Simultaneous application of different modeling materials • Mixed Tray: Production of various parts made of different materials in a single process step • Wide selection of FullCure® and composite materials: Photopolymer for model and support materials; dynamically generated Digital Materials™ • Numerous design and printing processes • Greater creativity through the use of multiple materials and composites with different material properties and color shades • Highest quality and accuracy • High-resolution 16-micron layers guarantee smooth surfaces and fine details • 350x350x200 mm large build platform for the production of various parts and assemblies • Suitable for use in an office environment TECHNICAL DATA - Layer thickness (Z-axis): up to 0.016 mm - Build platform (X x Y x Z): 350 x 350 x 200 mm - Build volume (X x Y x Z): 342 x 342 x 200 - Resolution X = 600 dpi, Y = 600 dpi, Z = 1600 dpi - Printing modes Digital Material (DM): 0.03 mm High Quality (HQ): 0.016 mm Bodpfx Ajzw Emhoqwsll High Speed (HS): 0.03 mm - Accuracy: 0.1 - 0.3 mm typical - Model materials FullCure 720, universally applicable and transparent Vero, opaque material DurusWhite, polypropylene-like material Tango, rubber-like elastic material ACCESSORIES Spare parts new replacement print head (new price approx. €1,000)

Condition: reconditioned (used), Yaskawa MOTOMAN MH6 DX100 KOPPENDORFER Roboterservice has specialized in MOTOMAN robots for 25 years! Robots are checked and freshly serviced by us. There is the possibility of commissioning and programming We have various MOTOMAN robots and spare parts in stock: HP20 DX100 MH6 DX100 HP20 NX100 ES165 NX100 ES200 NX100 ES200 RD DX100 SP80 NX100 UP6 XRC UP50 XRC EA1400 NX100 EA1900 NX100 Bledpfx Aer D N Daeqwel RM500 RM250 etc.

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 175 mm z-travel: 350 mm quill stroke vertical: 60 mm revolution per minute: vert.+ horiz.: 40 - 2000 / 18 step U/min feeds:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 Bsdpfx Aqsvc Avujwell distance spindle nose and table: min./max.: 50 /400 mm distance spindle center to column: min./ax.: 170 / 345 mm table surface area: 670 x 285 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,05 x 1,6 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system *

Condition: excellent (used), Year of construction: 2007, Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of manufacture: 2007 Control system: MC 4 Clamping Unit: Clamping force: 650 t Opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum platen daylight: 1,750 mm Tie bar spacing (h x v): 1,100 x 900 mm Platen dimensions (h x v): 1,510 x 1,370 mm Centering (nozzle-ejector plate): 200 / 200 mm 1st Injection Unit: Screw diameter: 80 mm Bsdpfx Aezgwbcsqwell Maximum shot weight in PS: 1,400 g Shot volume: 1,543 cm³ Injection pressure: 2,205 bar 2nd Injection Unit: Screw diameter: 45 mm Shot weight in polystyrene: 278 g Shot volume: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x air valves 16-fold cascade 3 x core pullers on moving platen 3 x core pullers on fixed platen 20 x hot runner controllers Robot interface: Euromap 67 Dimensions: Total weight: 34,500 kg Overall size (L x W x H): 7.8 x 2.5 x 2.5 m Operating hours: 45,400 h Machine can also be operated as a single-component machine (1K).

Year of construction: 1991, condition: used, weight 240 kg max 50 mm Bjdpfoztfvbox Aqwjll ja serial number 2035

Condition: good (used), Year of construction: 2000, 1x used Arburg 570C 2000-350 Bodpfx Aqezx D Hpewoll Year of manufacture: 2000 Screw: 45mm Core pulls: 1x Hot runner system: 6x Without conveyor belt

Condition: good (used), Year of construction: 1990, CNC universal milling machine MAHO Type: MH 500 W Blsdpfx Aer Igv Rjqwjl Control MAHO 432 Spindle holder : ISO 40 Spindle speed : 20 - 4000 rpm Travels : X 500 mm Y380 mm Z350 mm Table load capacity : 250 kg Machine in good condition from tool shop. Machine dimensions : Width 1500 mm Depth 2000 mm Height 1800 mm Weight .2100 Kg . Machine documentation available, machine can be demonstrated under power.