Used Yuanda Blow Molding Machine for sale (67,331)

Condition: excellent (used), Year of construction: 2013, operating hours: 46,500 h, functionality: fully functional, clamping force: 130 kN, screw diameter: 37 mm, The Negri Bossi will looked after did low hours . The machine have full service history year of manufacture 2013 the machine have one single hydraulic core and on air eject Hnsdpfx Akezcx Tmsrsu

Condition: like new (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: H23A0194018, Plastic INJECTION MOLDING MACHINE, Make: MILACRON, Model: VL 1500-288, Serial Number: H23A0194018, Year: 1994, 1,500-ton clamping capacity; platen dimensions: 2.20 × 1.94 m, tie bar spacing (H × V): 1.58 × 1.32 m, knockout (KO) patterns: 0.71 × 0.15 m, 1.02 × 0.25 m, 1.32 × 0.41 m, 1.63 × 0.41 m, and 1.93 × 0.41 m, mold height with ejector box and 2 ram spacers: 0.44 m, maximum daylight: 1.97 m, ejector stroke: 0.26 m, Core Pull, Air Eject, oil capacity: 2,195 L. Approximate overall dimensions: 13.81 m long × 3.70 m wide × 2.56 m high. Equipped with YUSHIN Cartesian Robot, Model: YCII-1300S-35-21, Serial Number: A132862, 220 V. Machine in full operating condition. Please inspect. Hodpfxoz Svp Ie Akrjnu ESPAÑOL: Máquina de moldeo por INYECCION DE PLASTICO marca: MILACRON, modelo: VL 1500-288, número de serie: H23A0194018, año: 1994, capacidad de cierre de 1,500 toneladas; platina de 2.20 × 1.94 m, distancia entre barras (H × V) de 1.58 × 1.32 m, patrones de expulsión (KO Patterns) de 0.71 × 0.15 m, 1.02 × 0.25 m, 1.32 × 0.41 m, 1.63 × 0.41 m y 1.93 × 0.41 m, altura de molde con caja de expulsión y 2 espaciadores de pistón de 0.44 m, apertura máxima (Max. Daylight) de 1.97 m, carrera de expulsión de 0.26 m, Core Pull, Air Eject, capacidad de aceite de 2,195 L. Dimensiones generales aproximadas: 13.81 m largo × 3.70 m ancho × 2.56 m alto. Equipada con Robot Cartisano marca: YUSHIN, modelo: YCII-1300S-35-21, número de serie: A132862, 220V. Máquina en completa operación. Favor de Inspeccionar.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 45,992 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 28 mm, injection pressure: 1,069 bar, injection weight: 9 g, total length: 2,050 mm, total width: 1,030 mm, total height: 2,780 mm, overall weight: 900 kg, warranty duration: 6 months, Equipment: documentation/manual, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this Boy 22AVV injection moulding machine. Vertical clamp with vertical injection is ideally suited for insert moulding, the operator can load parts for over moulding easily. The pneumatic gate ensures safe operation. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Hnsdpeywx Hqefx Akrou

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 350 mm, ejector stroke: 150 mm, Clamping force: 110t Year of manufacture: 2017 Injection shot weight: 132g Injection unit 290 + 100 (2K) Screw diameter: 35 mm Specific injection pressure: 2000 bar Injection volume: 144 ccm Injection shot weight: 132 g Mold clamping unit 1100 Clamping force: 110 t Distance between tie bars: 470 x 470 mm Mold height: 350 mm Opening stroke: 450 mm Ejector stroke: 150 mm Control: Selogica direct Two-component injection molding machine with a KUKA robot Hnsdpfx Asz Ef N Askrju Equipment: - Only ABS and PP were processed - 2nd injection unit EUROMAP 100 vertical (injection into the parting line) - Selogica direct control with a 15" touchscreen - Hydraulics with accumulator (100 l pressure accumulator), injection during mold closing - Control of a hydraulic rotary unit + 3 core pulls - Hydraulic ejector, blow unit - 6 heating circuits for the mold/hot runner - 6-circuit water distribution manifold for cooling - Min. mold height 350 mm, tie bar extension 100 mm, machine raised by 100 mm - KUKA KR6 robot (operated via Selogica) with enclosure

Condition: used, Year of construction: 2017, Arburg 470S 1100 290 injection moulding machine, year 2017 2-component machine The machine has been idle for quite some time. It is from 2017 and has only around 21,600 operating hours. The machine has a clamping force of 1100 kN; the lower unit is a 290 with a 35 mm screw, and the upper unit is a 100 with a 30 mm screw. Only ABS and TPE have been processed so far. The machine is equipped with an integrated hot runner system and 3 core pulls, along with additional options. Included is a Kuka handling unit, which is operated via the Selogica control of the machine, as well as the complete safety enclosure. Hnsdpfxow D R N Ro Akreu The two material loaders and the large conveyor belt are not included in the sale.

Condition: like new (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: H26A0196003, Plastic INJECTION MOLDING MACHINE, Make: MILACRON, Model: VL 3000-540, Serial Number: H26A0196003, Year: 1996, 3,000-ton clamping capacity; platen dimensions: 3.00 × 2.57 m, tie bar spacing (H × V): 2.14 × 1.70 m, knockout (KO) patterns: 1.32 × 0.41 m, 1.63 × 0.41 m, and 1.93 × 0.41 m, mold height: 0.86 m, maximum daylight: 2.83 m, ejector stroke: 0.35 m, 3 Core Pulls, Air Eject, oil capacity: 8,781 L. Approximate overall dimensions: 16.37 m long × 4.44 m wide × 3.68 m high. Equipped with MKA Cartesian Robot, Model: YCII-1300S-35-21, Serial Number: A132862, 220 V. Machine in full operating condition. Please inspect. ESPAÑOL: Máquina de moldeo por INYECCION DE PLASTICO marca: MILACRON, modelo: VL 3000-540, número de serie: H26A0196003, año: 1996, capacidad de cierre de 3,0000 toneladas. platina de 3.00 × 2.57 m, distancia entre barras (H × V) de 2.14 × 1.70 m, patrones de expulsión (KO Patterns) de 1.32 × 0.41 m, 1.63 × 0.41 m y 1.93 × 0.41 m, altura de molde de 0.86 m, apertura máxima (Max. Daylight) de 2.83 m, carrera de expulsión de 0.35 m, 3 Core Pull, Air Eject, capacidad de aceite de 8,781 L. Dimensiones generales aproximadas: 16.37 m largo × 4.44 m ancho × 3.68 m alto. Equipada con: Robot Cartisano marca: MKA, modelo: YCII-1300S-35-21, número de serie: A132862, 220V. Máquina en completa operación. Favor de Inspeccionar. Hnsdpfoz Svrvex Akrou

Condition: like new (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: H23A0196006, Plastic INJECTION MOLDING MACHINE, Make: MILACRON, Model: VL 1500-362, Serial Number: H23A0196006, Year: 1996, 1,500-ton clamping capacity; platen dimensions: 2.20 × 1.94 m, tie bar spacing (H × V): 1.57 × 1.32 m, knockout (KO) patterns: 0.71 × 0.15 m, 1.02 × 0.25 m, 1.32 × 0.41 m, 1.63 × 0.41 m, and 1.93 × 0.41 m, mold height with ejector box and 2 ram spacers: 0.44 m, maximum daylight with ejector box and 2 ram spacers: 1.97 m, ejector stroke: 0.26 m, Air Eject, oil capacity: 2,195 L. Approximate overall dimensions: 13.81 m long × 3.70 m wide × 2.56 m high. Equipped with YUSHIN Cartesian Robot, Model: YAII-1300S-21, Serial Number: 28505001, 220 V. Machine in full operating condition. Please inspect. Hnjdpfx Akjz Svrcersu ESPAÑOL: Máquina de moldeo por INYECCION DE PLASTICO marca: MILACRON, modelo: VL 1500-362, número de serie: H23A0196006, año: 1996, capacidad de cierre de 1,500 toneladas. platina de 2.20 × 1.94 m, distancia entre barras (H × V) de 1.57 × 1.32 m, patrones de expulsión (KO Patterns) de 0.71 × 0.15 m, 1.02 × 0.25 m, 1.32 × 0.41 m, 1.63 × 0.41 m y 1.93 × 0.41 m, altura de molde con caja de expulsión y 2 espaciadores de pistón de 0.44 m, apertura máxima (Max. Daylight) con caja de expulsión y 2 espaciadores de pistón de 1.97 m, carrera de expulsión de 0.26 m, Air Eject, capacidad de aceite de 2,195 L. Dimensiones generales aproximadas: 13.81 m largo × 3.70 m ancho × 2.56 m alto. Equipada con: Robot Cartisano marca: YUSHIN, modelo: YAII-1300S-21, número de serie: 28505001, 220V. Máquina en completa operación. Favor de inspeccionar.

Condition: excellent (used), Year of construction: 2003, operating hours: 62,490 h, functionality: fully functional, clamping force: 160 kN, screw diameter: 45 mm, injection weight: 330 g, The Negri Bossi 160T in very good condition have full service history from Negri Bossi distance between tie bars 510X450 . Robot interface and two Hydraulic cores . Hedpfx Akezd U Dijrjnu

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 20 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 43 mm, clearance between the columns: 460 mm, displacement volume: 452 cm³, injection pressure: 1,340 bar, injection weight: 416 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,400 mm, total height: 1,850 mm, overall weight: 4,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN120A5-IU604 D=43 Clamping force: 120T Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Suitable 6kg or 12kg linear robot available upon request. Basic standard equipment: see brochure. Optional equipment: Water connections: 6 for fixed platens, 6 for movable platens 3 core pulls: 2 on movable platen and 1 on fixed platen 1x Harting connector for the core pull Ejector safety interface Hodjzz Smcjpfx Akrjnu 6x cascade 1x valve connector 2x 16A sockets 1x 25A socket

Condition: used, Year of construction: 2005, operating hours: 130,948 h, functionality: fully functional, machine/vehicle number: 155136, clamping force: 1,500 kN, total length: 5,196 mm, total width: 1,704 mm, total height: 2,189 mm, overall weight: 9,500 kg, Equipment: documentation/manual, Technical condition: operational, used until the end of its production cycle. Regularly serviced and maintained. This machine is ideally suited for the production of plastic components. It is a robust design from a reputable manufacturer, ensuring reliable and precise operation. The machine can be inspected by prior arrangement. Technical documentation is available. Assistance with organizing loading is provided. Hnjdpfsz Enu Isx Akrju

Condition: used, Year of construction: 2001, Order No. 20, Serial No. 184934, control system, manufacturer Arburg, closing force 1,000 kN, screw diameter 35 mm, handling system, conveyor, manufacturer colortronic. Hodpfx Asz Hl Eyokrsnu

Condition: excellent (used), Year of construction: 2020, KRAUSSMAFFEI KM 201-380 PX electric injection molding machine Year of manufacture: 2020 Operating hours: 21,849 h Hnsdpfx Asz Szncskreu Clamping force: 2,000 kN (200 tons) Control system: MC6 Drive system: servo-electric with servo-hydraulic components Machine characteristics • Five-point, double toggle mechanism for the clamping unit, three-platen design. • Servo-electric drive for the clamping unit. • Servo-electric drive for injection and plasticizing. • Servo-hydraulic drive for the injection unit movement. • MC6 control system based on an industrial computer with real-time Ethernet communication. • Plasticizing unit for thermoplastics with a 40 mm diameter screw. Clamping unit Parameter Value Clamping force 2,000 kN (200 t) Mold opening force 300 kN Mounting plate dimensions (H × V) 870 × 820 mm Distance between columns (H × V) 635 × 585 mm Mold opening stroke 500 mm Minimum mold height 250 mm Maximum mold height 550 mm Maximum plate clearance 1,050 mm Ejector stroke 200 mm Ejector force forward / backward 39 / 19 kN Ejector speed 350 mm/s Injection unit Parameter Value Screw diameter 40 mm L/D ratio 20:1 Maximum injection pressure 1,860 bar Injection volume 201 cm³ Injection shot weight 183 g Injection speed 125 mm/s Injection rate 157 cm³/s Maximum screw speed 334 rpm Plasticizing rate 24.7 g/s Screw torque 337 Nm Nozzle clamping force 34 kN Nozzle radius 10 mm Nozzle orifice diameter 4 mm Electrical and hydraulic parameters Parameter Value Connected load 13.8 kW Electrical protection 63 A Installed heater power 11.5 kW Number of cylinder heating zones 5 Dry cycle time according to EUROMAP 6 2.0 s / 445 mm Oil tank capacity 200 l Weight and dimensions Parameter Value Net weight with control cabinet 14,300 kg Machine length 6,120 mm Machine width 2,170 mm Machine height 2,210 mm

Condition: like new (used), functionality: fully functional, machine/vehicle number: B-12, 1 CINCINNATI MILACRON Plastic Injection Molding Machine, Machine No. B-12, 500-ton clamping capacity, hydraulic clamping unit, 3.93 in (100 mm) screw diameter, 12.13 in² barrel area, general-purpose screw, 6.70 intensification ratio, 2,640 psi maximum hydraulic pressure, 17,582 psi maximum plastic pressure, 14.17 in maximum shot size, 2,693 g injection capacity, 43.30 in vertical x 43.00 in horizontal tie-bar spacing, 16.00 in minimum mold height, and 55.10 in maximum clamp opening. Hedpjz Svu Dsfx Akrjnu ESPAÑOL: 1 Máquina inyectora de plástico MARCA Cincinnati Milacron, No. de máquina B-12, capacidad de cierre de 500 Ton, unidad de cierre hidráulica, diámetro de tornillo de 3.93 in (100 mm), área de barril de 12.13 in², tornillo tipo general, coeficiente de intensificación de 6.70, presión hidráulica máxima de 2,640 psi, presión plástica máxima de 17,582 psi, tamaño máximo de disparo de 14.17 in, capacidad de inyección de 2,693 g, distancia entre barras de 43.30 in vertical x 43.00 in horizontal, altura mínima de molde de 16.00 in y apertura máxima de clamp de 55.10 in.

Condition: used, Year of construction: 2023, 2 x Engel VC 2460/180 injection molding machines, technical version, manufactured in 2023. Hnedjzgtvvepfx Akrou

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 4,000 mm, total width: 1,050 mm, total height: 2,000 mm, overall weight: 164 kg, input voltage: 230 V, working width: 4,000 mm, Bralyx: 200x105x110 cm Hnedpfx Ajzxh Nuskreu Tire: 200x45x200 cm

Condition: excellent (used), Year of construction: 2007, operating hours: 56,800 h, functionality: fully functional, clamping force: 55 kN, screw diameter: 32 mm, injection weight: 109 g, The Negri Bossi 55T in very good condition full service history still in production . The machine have one hydraulic core and one single air eject year 2007 . Hedszcwv Tjpfx Akrenu

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, overall weight: 8,700 kg, workpiece length (max.): 165 mm, workpiece diameter (max.): 35 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Max. output: 7,200 bottles/h Product dimensions Max. preform length: 165 mm Preform diameter: 18–35 mm Ring diameter: 27–42 mm Max. neck finish diameter: 38 mm Neck height: 9–27 mm Max. bottle height: 350 mm Max. bottle diameter: 105 mm Max. bottle volume: 2 l MACHINE DETAILS Dimensions & Weight Blow module (L × W × H): 3,293 × 2,325 × 3,196 mm Control cabinet (L × W × H): 1,998 × 602 × 2,410 mm Blow module: 6,300 kg Control cabinet: 1,200 kg Preforms feeder: 1,200 kg Total weight: 8,700 kg Noise level: 83 dB(A) Installed power Installed power: max. 160 kW Reference consumption (1,500 ml bottle): 88 kW Reference consumption (1,000 ml bottle): 62 kW Reference consumption (500 ml bottle): 45 kW Infrared heating (9 zones): 132 kW Operation and feed system: 28 kW Hnsdpfsyrfvgjx Akrsu Power supply Supply voltage: 230/400 V ±10 % Frequency: 50 Hz ±1 % Cooling water Cooling capacity: 20,000 kcal/h Water temperature: 8–12 °C Flow rate: max. 5 m³/h Pressure: 3–5 bar Compressed air Air consumption at 40 bar (0.25–2 l bottle): 180–700 Nm³/h Air consumption at 7 bar (operating air): 35 Nm³/h

Condition: like new (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 3922A01/925, Plastic INJECTION MOLDING MACHINE, Make: MILACRON, Model: VL 1500-232, Serial Number: 3922A01/925, Year: 1992, 1,500-ton clamping capacity; platen dimensions: 1.94 × 1.94 m, tie bar spacing (H × V): 1.32 × 1.32 m, knockout (KO) patterns: 0.71 × 0.15 m, 1.02 × 0.25 m, 1.32 × 0.41 m, and 1.63 × 0.41 m, mold height with ejector box and 2 ram spacers: 0.44 m, maximum daylight with ejector box and 2 ram spacers: 1.97 m, ejector stroke: 0.26 m, Gas Assist, Air Eject, oil capacity: 2,195 L. Approximate overall dimensions: 13.81 m long × 3.70 m wide × 2.56 m high. Equipped with YUSHIN Cartesian Robot, Model: YCII-1300S-35-21, Serial Number: A132861, 220 V. Machine in full operating condition. Please inspect. Hodpfx Asz Svqxokrjnu ESPAÑOL: Máquina de moldeo por INYECCION DE PLASTICO marca: MILACRON, modelo: VL 1500-232, número de serie: 3922A01/925, año: 1992, capacidad de cierre de 1,500 toneladas. platina de 1.94 × 1.94 m, distancia entre barras (H × V) de 1.32 × 1.32 m, patrones de expulsión (KO Patterns) de 0.71 × 0.15 m, 1.02 × 0.25 m, 1.32 × 0.41 m y 1.63 × 0.41 m, altura de molde con caja de expulsión y 2 espaciadores de pistón de 0.44 m, apertura máxima (Max. Daylight) con caja de expulsión y 2 espaciadores de pistón de 1.97 m, carrera de expulsión de 0.26 m, Gas Assist, Air Eject, capacidad de aceite de 2,195 L. Dimensiones generales aproximadas: 13.81 m largo × 3.70 m ancho × 2.56 m alto. Equipada con: Robot Cartisano marca: YUSHIN, modelo: YCII-1300S-35-21, número de serie: A132861, 220V. Máquina en completa operación. Favor de inspeccionar.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, clearance between the columns: 480 mm, displacement volume: 247 cm³, injection pressure: 272 bar, injection weight: 107 g, mold height (min.): 150 mm, ejector force: 40 N, ejector stroke: 100 mm, plate width: 705 mm, plate height: 705 mm, total length: 5,037 mm, total width: 1,590 mm, total height: 1,850 mm, overall weight: 5,400 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF120 IU320 D=30 Fully electric IMM. Ejector, nozzle system, core pulls servo-hydraulically controlled. Clamping force 120T Tie bar spacing 480x480 Tool installation height 150 to 580 Robot interfaces Euromap 18 and Euromap 67 Warranty can be optionally extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Optional equipment: CE Maximum tool height increased to 580 mm Bimetallic plasticizing up to GF 30% Interface for conveyor belt Electric quick-change system for the cylinder with Harting interface 2 additional hydraulic core pulls with limit switches 2 air blow devices, permanently mounted on the stationary platen Dosing signal interface with HAN-3A connector Additional power supply: 220 V, 10 A, Schuko socket 20-mA interface for mold temperature controller One water distributor 4 × 2 on the rear of each platen with 3/8" connections 2 water distributor batteries with 4 lines each Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable input/output signals Centering rings on both platens according to Euromap 18 / 67 Standard equipment: Clamping unit · Clamping unit with automatic central lubrication · Clamping movements via proportional valve control · Hydraulically operated ejector plate · Tool protection · Variable adjustment of the clamping force possible · Ejector protection · Mechanical robot interface Euromap 18 · Footboard protection under the clamping unit from D1 1100 and larger · Precision leveling shims between machine frame and customer floor · Platens with threaded holes and T-slots, see technical data · Automatic central lubrication (with grease) · Ejector plate Injection unit · Hydraulic dual-cylinder injection · Thermally insulated plasticizing unit · 10-stage adjustment of the injection speed · (Control parameters: speed; pressure; position) · 10-stage adjustment of the holding force (Control parameters: speed; pressure; position) · 5-stage adjustment of the plasticizing speed · (Control parameters: speed; pressure; position) · Plasticization supported on linear guides · Hydraulic nozzle system · Cold start protection · Screw retraction function · Automatic shut-off · Measuring system for screw position Electrical system · Plasticizing heater via PID control · Manual, semi-automatic and fully automatic operation possible · Maintenance interface · Automatic alarm system with horn · Unlimited technical parameter memory · Automatic tool height adjustment · Emergency stop function · Online cycle analysis · 12" TFT touch operating panel · Visualized graphic program · PDP interface · Injection monitoring · Tool closing monitoring · SPC interface · IP54 standard · Screw speed measurement · 16-level password security · Euromap 12 · Automatic overheating protection Hydraulic system · Quiet servomotor hydraulic system · Energy-saving servomotor hydraulic system Hnsdpozzn Hljfx Akrsu · High-performance servopump system · Back pressure control via proportional valves · Oil preheating · Injection and tool closing monitoring · Automatic pressure and flow calibration · Oil temperature and oil level alarm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 820 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,100 g, mold height (min.): 380 mm, ejector force: 96,000 N, ejector stroke: 230 mm, plate length: 1,200 mm, plate width: 1,200 mm, total length: 8,020 mm, total width: 2,210 mm, total height: 2,570 mm, overall weight: 21,000 kg, Closing force: 420 t Year of manufacture: 2015 Injection weight: 1,100 g Injection unit 2300 Screw diameter: 70 mm Screw L/D ratio: 20 Specific injection pressure: 1877 bar Injection volume: 1212 ccm Injection weight: 1,100 g Pump motor power: 51 kW Cylinder heater band power: 27 kW Closing unit Closing force: 420 t Tool plate dimensions: 1200 x 1200 mm Distance between tie bars: 820 x 820 mm Mold height: 380 - 825 mm Opening stroke: 770 mm Maximum mold distance: 1595 mm Ejector force: 96 kN Ejector stroke: 230 mm Weight: 21,000 kg Dimensions (m) L x W x H: 8.02 x 2.21 x 2.57 m Control: NC5 Equipment: - Hydraulic core pull: 4 (+ 2 additional connections on the stationary platen) - Hydraulic cascades: 4 - Hot runner adjustment points (zones): 40 - Servo-controlled activeDrive hydraulic pump (energy-efficient) - Adjustable p+v injection in a closed-loop system Hodpfx Asz E Imwekrjnu - Wear-resistant screw, bimetallic cylinder - Automatic mold height adjustment - Closing force adjustment - activeProtect mold protection - Switching to pressure-dependent clamping (WID) - PDE process data recording, 100% control - 8-circuit cooling water regulator - EUROMAP 67 interface - World Connect - remote service - DR 832 CNC robot and safety fence included

Condition: used, Year of construction: 1998, Serial No. 174520, control unit, manufacturer Arburg, closing force 400 kN, screw diameter 20 mm, sprue picker, manufacturer TecnoMatic, type micro cnc, vacuum separator, manufacturer Piovan, type DPA20, year of manufacture 2016, microprocessor control, 2 temperature control units, internal numbers 14 and 19, F, drying cylinder, desiccant dryer, manufacturer Piovan. Hnedpfx Asz Hl H Rjkrsu

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Hnedoz Ipqvepfx Akrju Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: like new (used), Year of construction: 2010, operating hours: 24,600 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, mold height (min.): 300 mm, overall weight: 6,600 kg, Equipment: documentation/manual, Here we offer the following well-maintained used injection molding machine as part of our injection molding machine sales. We also purchase well-maintained injection molding machines, starting from the current model year 2010. We have been a wholesale supplier of used injection molding machines for over 25 years. Due to current circumstances - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: KraussMaffei Type: KM 160-750 Control: MC5 Year of manufacture: 2008 / Delivered by KraussMaffei in 2010, as the original customer cancelled. Machine No.: 61011790 Operating hours: 24,600 h Injection unit Injection unit/screw: 50 mm Injection volume: 393 ccm Injection weight: 358 g Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1892 bar Heating power: 16 kW Clamping unit Tie bar spacing: 520 x 520 mm Platen size: 820 x 845 (h x v) Clamping force: 160 tons / 1600 kN Hnjdpsz A Iarsfx Akrsu Opening stroke: 650 mm Maximum platen spacing: 950 mm Minimum mold height: 300 mm Ejector stroke: 150 mm Weight: 6,600 kg Pump motor: 22 kW Dimensions: approx. 4.90 m × 1.60 m × 2.10 m Extras -Machine shoes -Hydraulic screw back-rotation lock -Hydraulic screw drive with standard speed -Pneumatic valve 1 on the operator side for blowing function (1 piece 5/2-way valve with 1 solenoid coil). -Control optionally stroke/time or time/time. Quantity adjustable manually via 1 throttle valve at the valve outlet. -Nozzle protection door on the operator side, hinged -Ejector bay protection door on the operator side, hinged -Mechanical interface according to EUROMAP 18 for handling device on the fixed platen (with intermediate plate up to and including KM 500) -End position "rear" of the ejector and the tool ejector plate monitored in series -Chrome-plated tie bars in the clamping unit and injection unit -Media monitor in the pump room for oil pan monitoring -Enlarged oil cooler for a maximum water supply temperature of 31°C. -Hydraulic core pull control, 1-fold, on the operator side. -Water manifold, 8-fold -12 temperature control points for tool hot runner. Self-optimizing three-point PID controller of accuracy class 0.5. -Ejection of the cooled nozzle insert -Fan, control cabinet -Mains voltage supply: TN-C or TN-C-S or TN-S system (three-phase networks with separately routed neutral conductor or neutral conductor routed together with earth) -1 service socket, single-phase 10 A, in the control cabinet, connected before the main switch in country-specific design. -Signal interface according to EUROMAP 67 with reject signal and power supply socket CEE 16 A for handling device. -Event log for continuous recording and retrospective analysis -Quality monitoring package: process monitoring (cycle actual values and integrals) by specifying tolerance bands, actual value display, actual value storage. Documentation can be printed. -Z-cycle time analysis, cycle storage -Language: German, Greek Visible peripherals are not included in the scope of delivery. Free loading ex our warehouse in Hanover - worldwide delivery possible upon request. Inspection under power possible by appointment.

Condition: excellent (used), Year of construction: 1998, clamping force: 80 kN, screw diameter: 38 mm, The Boy 80T In Very Condition The Machine Done Low Hours One Owner Used In Training Centre Hodpfxeyhrqio Akrenu

Condition: excellent (used), Year of construction: 2016, operating hours: 33,921 h, functionality: fully functional, ENGEL Duo 1350H/330W/600WP combination machine including robot Year of manufacture: 2016 Operating hours: 33921 h Clamping unit Clamping force: 600 t Opening stroke: 1400 mm Tool mounting height: 450 - 1080 mm Maximum mold parting line distance: 1850 mm Mold size (h x v): 1115 x 975 mm Injection unit Screw diameter: 55 and 35 mm Injection volume: 618 + 154 cm³ Injection weight PS: 590 + 151 g Injection pressure: 2183 + 1600 bar Equipment: - Interface for rotary table/index plates Hnodpsz Nkavsfx Akrju - Core pull system, 2-way fixed mounting plate - Core pull system, 4-way movable mounting plate - Tool heating, 40 control circuits - Microcomputer CC200 Robot Engel Viper 40 RC300 - Max. handling weight: 23 kg - Z-axis: 4280 mm - X-axis: 1200 mm - Y-axis: 1500 mm - C-axis compact drive M - A-axis compact drive M - 8 additional compressed air circuits - 6 additional vacuum circuits