Used Zig-Zag Veneer Splicing Machine for sale (65,143)

Condition: used, Year of construction: 2003, machine/vehicle number: 4303/0442, type of input current: three-phase, input voltage: 400 V, empty load weight: 2,000 kg, Equipment: CE marking, For sale The Kuper FLI 1000 (manufactured in 2003) is an industrial veneer joining machine. It is valued in the woodworking industry for its precise and durable edge-to-edge veneer joining using resin adhesive, eliminating the need for glue beads. Key specifications and parameters: - Joining method: Edge-to-edge, using resin adhesive applied to the edges. - Throat depth: 1000 mm. Bwodpfxezmtk Te Ahmsu - Veneer thickness: from 0.3 mm to 2.5 mm. - Veneer length: from 500 mm. - Minimum veneer strip width: 45 mm. - Heating system: Provides uniform pressure and rapid adhesive curing while maintaining high efficiency. Required space Length: 2.3 m Required space Width: 2 m Required space Height: 1.5 m

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Manufacturer: Kuper Model: ACR CrossRunner 1600 Year of manufacture: 2007 Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Working width: 1600 mm (along the grain) Veneer strip width: from approx. 60 mm Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Suitable glues: PVAc or urea glue With automatic stacking Bwedpfsyayumsx Ahmou Control: Siemens Simatic with touch display Voltage: 400 V, 50 Hz, 3 Ph Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm

Condition: excellent (used), Year of construction: 1996, goose neck 920 mm feed speed 20 m/min veneer thickness ca. 0,4 - 2,0 mm motor 400 V, 50 Hz,, 3 PH incl. manual incl. glue thread Bwjdjg Nn E Nspfx Ahmou Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, functionality: fully functional, Kuper FW/J 920 Veneer Joining Machine Thread-and-glue joining machine Working width 920mm Working height 0.4-2mm Feed rate 15m/min Heated element with air blower Zigzag stitching Motor power 0.18kW Year of manufacture 2002 Air consumption 10l/min Dimensions 1280x560x1470mmH Bwjdpfx Asznzbpshmsu Weight 166kg

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 740703/01, passage width: 2,800 mm, input voltage: 400 V, type of input current: three-phase, The machine is fully operational and can be inspected during production while powered on. Also included in the sale is a Fisher + Rückle veneer parallel milling/gluing unit, capable of: edge milling with diamond tools Bwsdpfx Ahezdiinomou automatic glue application preparation of veneer edges before splicing The complete line has been used in professional production and has been continuously maintained. Main advantages: Heavy-duty industrial Fisher + Rückle quality Very stable and precise operation Machine in good working condition Can be demonstrated during operation Parallel milling and glue application unit included Diamond tooling included Suitable for professional veneer production The machine is located in Denmark and can be inspected by appointment.

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR15 / DAR 12 Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Bodpozuz Hfsfx Ahmjwu Min. veneer sheet length (grain direction): 350 mm Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, We are offering this used Kuper F. WM 630 veneer sewing machine for sale; the year of manufacture is unknown. Manufacturer: KUPER Serial No.: 2906 12339 Bodsz Afcyspfx Ahmowu The advertised price is 800 euros net (negotiable). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 01.642/F-1446, The machine is designed to cut an 800mm batch into an endless strip for Extruderfeeding Bwodpfxeuz Twqo Ahmju Description attached!

Condition: used, used, good conditionmake Kupertype FWJ 900machine no. 18033834throat depth 900 mmthreadheating airmobilespace requirement approx. 1400 mm x 600 mm x 1600 mmweight approx. 350 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Bsdpfx Ajvwfaxjhmjwu

Condition: used, Year of construction: 2015, functionality: fully functional, Machines connected in one line (all three machines are only sold together): 1. Veneer cross-jointing machine FURNIMASTER FZR-21 2. Direct unloading device DA-12R 3. Scissor lift INCLUDED Veneer specifications Bjdpfxjy Tpb Ro Ahmowu Veneer strip length (grain direction) 350 - 2100 mm Veneer strip width (cross grain) 50 - 500 mm Veneer strip thickness 0,3 - 1,5 mm Power data Maximum nominal output / machine cycles 30 cycles/min. Average production speed 17 - 20 cycles/min. Connection data (Basic machine) Connection power 9 kW Compressed air 6 bar Power consumption Electric energy 6,2 kWh Compressed air 15 NL/min. Dimensions and weight (Basic machine) Length 3500 mm Width 1500 mm Height 1530 mm Working table height 930 mm (+50/-0 mm) Net weight, approx. 2500 kg

Condition: used, Veneer machine Manufacturer: Fischer & Rückle Type: FZR 21 Year of manufacture: 2015 For the most efficient edge gluing of parallel-connected veneer strips into continuous or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or UREA adhesives. This edge feeding joining apparatus is the most economical alternative to longitudinal joining apparatuses for cross-grain applications. Production Approx. 17-20 joints/min. Technical data Veneer strip lengths (grain direction): 350-2150 mm Veneer strip widths (cross-grain direction): 50-600 mm Bwodozuzptjpfx Ahmsu Veneer surface width (cross-grain direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips Panel Automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - The Furnimaster-plus has a veneer alignment function (reverse transport movement) - Perfect joining of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, proven horizontal pressing system that results in fully closed, strong glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to touchscreen panel, clear symbols, separate manometers with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain) directly after splicing. Short widths can be pre-set and measured with the integrated encoder. Larger widths are determined by two photoelectric sensors that are mounted at the required distance from the clipper on the direct stacking device. Direct stacking device DA-12R, belt system For unloading and stacking the veneer surface directly after joining. The joined surfaces are gently unloaded and stacked on this compact direct stacking device without any mechanical impact. Min. veneer sheet length (grain direction): 350 mm Veneer sheet widths (across the grain): 250 - 1200 mm Max. stack height: 500 mm Max. stack width (across the grain) for unloading to the rear end: 1200 mm Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding. Another Fischer & Rückle machine, type: FZR 21, year of manufacture: 2009, is also available.

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Bodex Upgcjpfx Ahmewu

Condition: used, Second-hand machine Second-hand veneer splicing machine from Kuper, model FW 1150 Passage width: 1150 mm Feed speed: approx. 10–30 m/min Veneer thicknesses: 0.3–3 mm Bwedpfx Ahozk Nqqemju excluding tables at the front and rear Availability: at short notice Location: Röllbach

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 209070, CASATI BIT 900/2000 veneer cross-cutting machine. Fully functional. Bsdpfxeuna E He Ahmjwu

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Bwsdpszuz Hlsfx Ahmeu Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 140611/3, Fisher + Rückle Gluemaster - glue applying machine. Machine is 100% functional. Bwedpfx Asum R Agjhmsu

Condition: used, Year of construction: 2011, Stand-off distance: 920 mm Bjdpezqyx Sofx Ahmswu Feed rate: 15 m/min

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Bjdpfsuvdzusx Ahmowu

Condition: used, Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, power: 9 kW (12.24 HP), We offer for sale a used LINKS S.r.l. automatic zig-zag cotton wool production and packing line, manufactured in Italy in 2011. Manufacturer: LINKS S.r.l., Italy Year of manufacture: 2011 Line configuration: Z/AP + ASA + L/CC Serial numbers: 300–301 The line is designed for the automatic production, zig-zag forming and packing of absorbent cotton wool in polyethylene bags. Technical specifications: Capacity: up to 25 packs/min at 100 g (approx. 1,500 packs/hour) Electrical power: 9 kW Power supply: 380 V / 50 Hz / 3-phase Operation: fully automatic cycle Operators required: 1 Packing/product formats: 50 g, 100 g and 200 g Equipment includes sets of forming/packing chambers for 50/100 g and 200 g Bwodpfx Ahszxnyysmsu Original technical documentation included The line consists of the Z/AP + ASA + L/CC units, covering the zig-zag forming, conveying and pressing stages and automatic packing process. Suitable for production of absorbent cotton wool, medical cotton wool and cosmetic cotton wool. The equipment is sold as used machinery. Further technical information, photographs and original documentation are available upon request. Please contact us for additional information, inspection arrangements or further photographs.

Condition: used, Year of construction: 1995, Max. veneer thickness: 3.0 mm Gluing system: glue application roller with roller heating Disc: Yes, for transporting the veneer across the veneer table. Machine type: stationary Feed rate: 5 - 15 m/min Feed type: stepless Stand overhang: 950 mm Working height or feed table height: 940 mm Bwsdpozkh S Hsfx Ahmju Description: The glue is applied from below; the outer side of the veneer is always visible, with automatic thickness and tolerance compensation. Approximate weight: 400 kg Dimensions: 1700 x 900 x 1550 mm Motor power: 0.8 kW Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 1963, Brand: Gustav Josting Model: PFS 2100 Year of manufacture: 1963 Bsdpfx Ahemb U A Iemewu Technology data: Cutting length: 2100 mm Extra knife included Transport dimensions: 315x150x160 cm Weight: approx. 2000 kg Stock no: 2001659BXM

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm Bodpfxoxxb Rro Ahmjwu For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM Bwjdpfx Asz Eh Egjhmeu 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: used, used manufactured by Kuper type Mini 420 range 420 mm thread heating system electrical - new desk model required space ca. l x w x h mm 600 x 400 x 400 weight ca. 20 kg located in 97447 Gerolzhofen Bodpfx Ahsvwf Dwjmewu sale in current condition as seen - free on truck - without guarantee and guarantee

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm Bwsdex D Tbmepfx Ahmsu ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.