Used Backhus A63 for sale (233)

Condition: used, Year of construction: 2016, Makino A51NX in very good condition, including a new ATC tool changer and Cubes. Approx. 11,000 hours of cutting time. Capacity & Travels: Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Hsdpfezg N E Hox Antjt Y & Z-Axis Travel: 640 mm Max. Workpiece: ∅ 630 mm × 900 mm Max. Payload Capacity: 400 kg Spindle: Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Motion & Feed Rates: Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cutting Feedrate: 50,000 mm/min Axis Acceleration: 1G B-Axis Indexing: Full 4th axis, Direct Drive (0.001-degree increments) Tooling: ATC (Automatic Tool Changer) Capacity: 60 tools Tool-to-Tool Time: 0.9 seconds Max. Tool Diameter / Weight: 170 mm / 12 kg 04003 HSK-A63 Spindle – Replaces the standard ISO50 interface. Features a double taper, full face contact, and hollow shank interface. Tool clamping force is higher than 44kN; HSK tool holders are required. 14017 HSK holders for 60 Tool ATC 26001 Moire Scale Feedback X, Y, Z-Axis Increments 0.05µm, positioning tolerance Tp = 0.006mm (ISO 230-2). 29006 Through Spindle Coolant 3.0MPa – Provides TSC flow of 30 l/min at 3.0MPa, replacing the standard 1.5MPa. Air through the spindle is possible. The pressure data refers to the output flange of the pump. 29009 Flow Switch for Through Spindle Coolant – Monitors through-spindle coolant flow. The machine will feed hold if the flow is below a preset level. Note: Recommended option for filtration systems to prevent tool damage. 31002 Air curtain for splash guard window – Located in the middle of the operator-side window, this air curtain prevents chips and coolant from obstructing the view. 37000 Broken tool sensor outside machining area (BTS) – Tool breakage detection for centric tools (tool diameter 1-40mm, tool length 65 - 430mm). Length measurement is performed using a movable probe. The measurement takes place in the ready position for a tool change, outside the machining area. Accuracy ± 2mm. If there is a difference between the measurement before and after machining, an alarm is triggered automatically. 37101L Automatic Workpiece Measuring Device (RENISHAW OMP60) – Three-coordinate measuring probe from RENISHAW with automatic coordinate correction. The signal is transmitted via infrared. Tolerance approx. 0.005mm. 14 automatic measurement cycles are available as pre-programmed cycles in the program memory. Note: requires 13m. Control Options: 60001 Automatic Corner Override (G62) – Automatically decelerates the cutter at a corner depending on the corner angle, in order to maintain the cutting rate per unit time. 62007 Run hour and parts quantity display. 63034 DATA CENTER Storage Type B (total: 800MB) – Communication card with internal 800MB removable flash RAM card used for storing and executing NC data (of subprograms) for high-speed, high-definition finishing and supporting SGI capabilities. CNC programs can be transferred to and from a CAD/CAM system from the operator's pendant by FTP get and put commands over an Ethernet cable. 66003 Additional 48 Work Offsets (G54.1 P1-P48) – Allows for 48 work coordinate systems, simplifying multiple part fixtures. 68010 600 Macro Common Variables – Variable numbers 100-199 are reset and cleared when the power is turned off, while 500-999 are permanent. Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Payload Capacity: 400 kg Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cut...

Condition: ready for operation (used), Year of construction: 2015, operating hours: 45,092 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 2,000 kg, overall weight: 21,500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis HERMLE C 52 U was manufactured in 2015. It features an impressive X-axis travel of 1000 mm, Y-axis travel of 1100 mm, and Z-axis travel of 750 mm. The machine is equipped with a spindle speed of 18000 rpm and a table load capacity of 2000 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE C 52 U vertical machining centre we have for sale. Contact us for further details. - Main Drive Power (100%/20% ED): 17.5 / 35 kW- Torque (100%/20% ED): 108 / 215 Nm- Table Clamping Surface: Ø 1150 x 900 mm- Swivel Range: +100° to -130°- Tool Places in Internal Magazine: 60- Tool Places in Additional Magazine (ZM135): 135- Max. Tool Diameter: 95 mm (160 mm with free adjacent spots)- Max. Tool Length: 500 mm- Max. Tool Weight: 15 kg- Internal Coolant Supply: 80 bar- Coolant Tank Capacity: 1500 l- Voltage: 400 V / 50 Hz- Nominal Current: 100 A- Power Consumption: 68 kVA (Max 71 kVA)- Additional Equipment: Paper band filter, chip conveyor, blow-off device, glass safety windows with rotating clear view window, Heidenhain electrical thermal compensation, Heidenhain HR handwheel module, BLUM tool breakage/measurement A2, chip flushing gun, emulsion mist extraction, m&h 25.50 HSK-A63 infrared touch probe, DCM collision monitoring Hodpfxezw N Hfe Antjt Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2022, operating hours: 14,089 h, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 10,000 rpm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, number of axes: 5, This 5-axis FPT DINOMAX gantry milling machine was manufactured in 2022. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 2700 mm, and Z-axis travel of 1300 mm. The machine includes a robust table size of 2500 x 4000 mm with a load capacity of 15 t/m². If you are looking to get high-quality milling capabilities, consider the FPT DINOMAX gantry milling machine we have for sale. Contact us for further details. Hodpfx Aezw I Dpontet - NC Software Version: 340590 11 SP5 Hotfix1- Control On Time: 16,539 hours- Machine On Time: 14,089 hours- Program Run Time: 6,549 hours- Spindle Motor 1 Working Hours: 0 hours- Spindle Motor 2 Working Hours: 3,627 hours- Head Accessory 1 Working Hours: 5,768 hours- Head Accessory 2 Working Hours: 4,343 hours- Longitudinal Travel (X-Axis): 4000 mm- Cross Travel (Y-Axis): 2700 mm- Vertical Travel (Z-Axis): 1300 mm- Max. Rapid Feed X-Axis: 50 m/min- Max. Rapid Feed Y-Axis: 50 m/min- Max. Rapid Feed Z-Axis: 35 m/min- Max. Working Feed X-Axis: 40 m/min- Max. Working Feed Y-Axis: 40 m/min- Max. Working Feed Z-Axis: 25 m/min- Table Dimensions: 2500 x 4000 mm- Table Height: 300 mm- Table Load Capacity: 15 t/m²- T-Slots Width & Distance: 22 mm (DIN 650 H12), 250 mm pitch- Max. Installed Power: 177 KVA- Max. Required Current: 235 A- Required Pneumatic Flow: 400 Nl/min- Operating Pneumatic Pressure: 6 bar- Operating Voltage: 400V 50Hz- Machine Weight: 66,650 kg- Integrated 4th Torque C-Axis Swivel Range: +/-270°- Integrated C-Axis Max Speed: 30 rpm- TUDX 50° Universal Milling Head A-Axis Range: +/-180°- Electrospindle HSK-A100 (10,000 rpm): 45 kW / 55 kW (S1/S6), 246 Nm / 301 Nm (S1/S6)- High-Frequency Spindle HSK-A63 EMPT2230-H63 (22,000 rpm): 30 kW / 37 kW (S1/S6), 90 Nm / 110 Nm (S1/S6)- Tool Changer Capacity: Chain magazine for 128 tools (HSK-A100 x 40, HSK-A63 x 88)- Max. Tool Length: 700 mm (HSK-A100), 400 mm (HSK-A63)- Max. Tool Weight: 25 kg (HSK-A100), 10 kg (HSK-A63)- Coolant Tank Capacity: 1500 liters- High-Pressure Internal/External Coolant System (IKZ/ÄKZ): 70 bar / 30 l/min- Additional Features: Linear Motor Driven X and Y Axes, Renishaw RMP60M Wireless Probe, Laser Tool Measurement System, MARES 4.0+ System Integration, Bellows Roof Enclosure, Stainless Steel Interior Guarding, Chip Conveyors

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 18,000 rpm, spindle motor power: 33,000 W, number of axes: 3, This 3-axis FPT STINGER 180 vertical machining centre was manufactured in 2021. It features an impressive X-axis travel of 1750 mm, Y-axis travel of 1400 mm, and Z-axis travel of 800 mm. The machine is equipped with a powerful spindle speed of up to 18,000 rpm and a tool changer capable of holding 60 tools. If you are looking to get high-quality machining capabilities, consider the FPT STINGER 180 machine we have for sale. Contact us for further details. Hjdpfezw Iw Aox Antot - Max. Interpolating Axis Speed: 35 m/min- Installed Power: 65 kVA- Required Current: 93 A- Pneumatic System Air Flow: 400 Nl/min- Pneumatic Operating Pressure: 6 bar- Rotary Table Length: 1200 mm- Rotary Table Width: 1000 mm- Table Load Capacity: 3000 kg (centrally and evenly distributed)- Distance Table Surface to Vertical Spindle Front Edge: 105 - 905 mm- Max. Horizontal Clearance: 1430 mm- Floor to Table Surface Height: 800 mm- Table T-Slots: 9 T-slots (center slot 18 mm H7, remaining 18 mm H11, spacing 100 mm)- Table Positioning Resolution: 0.0001°- Table Rapid Rotation Speed: 7200 °/min (20 rpm)- Table Clamping Torque: 7500 Nm- Table Positioning Accuracy P: 8 sec- Table Repeatability Accuracy Ps: 4 sec- CNC Control Unit: HEIDENHAIN TNC 640 (19" TFT color flat screen, 4 GB RAM, 32 GB SSD, interfaces: 1x RS-232-C, 2x Ethernet, 5x USB)- Portable Handwheel: HEIDENHAIN HR520- Spindle/Head Type: Automatic universal head with 0.001° indexing, Direct Drive motor, liquid cooled- Spindle Taper: HSK-A63 DIN 69893- Spindle Speed: Up to 18,000 rpm- Spindle Power (S1/S6): 22 / 33 kW- Spindle Torque (S1/S6): 84 / 128 Nm- Head A-Axis Swivel Range: +/- 185°- Head A-Axis Max Speed: 30 rpm- Head A-Axis Clamping Torque: 1400 Nm- Head A-Axis Max Available Torque: 410 Nm (302 ft lb)- Table Axis Max Available Torque: 2500 Nm (1844 ft lb)- Tool Changer: Chain tool changer, 60 tools, VERT position- Max Tool Length: 300 / 350 mm- Max Tool Diameter: 75 mm- Max Tool Weight: 10 kg- Laser Probe: RENISHAW laser probe software system (max tool diameter 180 mm)- Workpiece Measuring Probe: RENISHAW RMP40M radio probe with LP2 (100 mm length, 6 mm diameter stylus) and RMI-Q receiver- Coolant System: Internal (30 bar, 10 l/min) and external (30 bar, 40 l/min) coolant supply, 800 l tank capacity, 80/60 micron filters- Internal Air Supply: High-speed internal compressed air through spindle (up to 24,000 rpm)- Chip Conveyor: 2 built-in screw conveyors with discharge to the right- Vibration Sensor: SRV collision and vibration overload detection sensor

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 18,000 rpm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 HSCI 15", number of axes: 3, This 3-axis FPT Raid XL gantry milling machine was manufactured in 2021. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 800 mm. The machine includes a robust table size of 1100 x 2000 mm with a load capacity of 3300 kg. If you are looking to get high-quality milling capabilities, consider the FPT Raid XL machine we have for sale. Contact us for further details. - Table Dimensions: 1100 x 2000 mm- Table Load Capacity: 3300 kg (central and evenly distributed)- T-Slots: 11 T-slots, 18 mm width (H11), 100 mm pitch- Spindle Type: Vertical High-Frequency Spindle (TVS18)- Spindle Speed Range: Up to 18,000 RPM- Spindle Power (S1/S6): 18 kW / 22 kW- Spindle Torque (S1/S6): 80 Nm / 100 Nm- Tool Taper: HSK-A63 DIN 69893- Tool Changer: Automatic Chain Tool Changer (RVATC30H), 30 positions- Max. Tool Length: 300 mm- Max. Tool Diameter: 80 mm- Max. Tool Weight: 10 kg- Control Unit: Heidenhain TNC 620 HSCI 15"- Handheld Control: Portable Electronic Handwheel Heidenhain HR520- Max. Rapid Feed / Interpolating Speed: 35 m/min- Installed Power: 54 kVA- Required Current: 78 A- Voltage / Frequency: 400V 50Hz- Operating Air Pressure: 6 bar- Air Flow Required: 400 Nl/min- Coolant System: Internal (30 bar high pressure) & External (30 bar low pressure), 500 L tank capacity- Chip Conveyor: 2 internal bed screws + main conveyor with right-side discharge- Workpiece Probe: RENISHAW RMP40 Wireless Touch Probe- Tool Measurement: Laser Probe with software for tool length, radius, and breakage control (Max dia. 180 mm)- Software Options: DREG (Hi-Performance Adjustable Dynamics), GREEN_FPT (Energy Optimization), MARES 4.0+ CLIENT Package (Industrial IoT platform) Technical Specification Hodpfxezw H Tcj Antst Taper Size HSK 63

Condition: used, Year of construction: 2012, Deckel Maho NHX 4000 Horizontal Machining Center Horizontal Machining Center, Deckel Maho Type / Model: DMG NHX 4000 Condition: Used Year of Manufacture: 2012 Program Runtime: approx. 48,200 hours Spindle Hours: approx. 39,200 hours Technical Data Travel ranges X / Y / Z axis: 560 mm / 560 mm / 660 mm Rapid traverse rate (X/Y/Z): 60 m/min Work table & Pallets Pallet size: 400 x 400 mm Max. workpiece weight: 400 kg Max. workpiece dimensions (Ø x H): Ø 630 x 900 mm Pallet change time: approx. 8.0 seconds B-axis (rotary table): 360° (increment 0.001°, direct drive) Main spindle: 12,000 1/min Max. speed: 12,000 1/min Drive power: approx. 15 kW (or up to 30 kW in special/power versions) Max. torque: approx. 110 Nm Tool interface: SK 40 or HSK-A63 (depending on the exact spindle design from the factory) Hedpezxc H Uefx Antjt Tool changer (ATC) Magazine slots: Usually 40 stations as standard Max. tool diameter: 70 mm (up to 170 mm with free neighboring slots) Max. tool length: 450 mm Max. tool weight: 12 kg Dimensions & Weight Machine weight: approx. 7850 kg Footprint / Dimensions (W/D/H): approx. 2,860 x (width varies depending on the chip conveyor) x 2540 mm Control system (standard model year 2012): MAPPS IV based on Fanuc (alternatively Siemens 840D) Inquiry item: Transport costs in an individual offer.

Condition: used, Year of construction: 2008, Deckel Maho DMC 55H duoBlock Horizontal Machining Center Horizontal Machining Center Deckel Maho Type / Model DMC 55 H DuoBlock Year of Manufacture 2008 Condition Used Program Runtime: approx. 66,600 hours Spindle Runtime: approx. 46,500 hours Technical Data Travel distances X / Y / Z axes 560 mm / 600 mm / 600 mm Rapid traverse (X/Y/Z) 40 m/min (optional in the linear version or high-dynamics up to 60 m/min) Work table & Pallet Changer (APC) Number of pallets 2-position pallet changer Pallet size 400 mm x 400 mm Max. workpiece weight 500 kg Max. workpiece height 850 mm B-axis (rotary table) 360° (designed as an NC rotary table, usually with 0.001° division) Main spindle Standard version 12,000 rpm (often with SK 40 / HSK-A63) High-speed option 18,000 rpm (standard with HSK-A63) Tool changer (ATC) Magazine positions Standard 60 stations Tool interface HSK-A63 (alternatively SK 40 or BT 40) Max. tool diameter 80 mm (with free neighboring positions up to 160 mm) Max. tool length 330 mm Dimensions, weight & control Hedpjzxc Ewsfx Antst Machine weight approx. 11,000 kg to 13,000 kg (depending on magazine size and chip conveyor) Footprint (L x W x H) approx. 5.0 x 3.0 x 2.8 m (pure space requirement without peripherals) Control Siemens Sinumerik 840D Powerline / Solution (alternatively Heidenhain iTNC 530)

Condition: used, Year of construction: 2019, functionality: fully functional, Control System (Standard) - HEIDENHAIN TNC-640 HSCI control unit with software option 1&2 (see control system options), DCM collision protection function - 5-axis simultaneous operation - Block processing time 0.5 sec. - NC memory capacity 21 GB on SSDR memory card - USB interface - Ethernet network interface - 1024-block look-ahead function - 3D tool length compensation function - DCM (Dynamic Collision Monitoring) - TSC (Spindle Thermo-Compensation) - Tool center point control (TCPC) - smarT.NC (alternative operating mode for dialog and plain text programming in a mix, particularly suitable for beginners) Linear axes: - Travel ranges X/Y/Z: 600/600/500 mm Linear roller guides: - Manufacturer: INA - Size: 45x45 mm Linear axis accuracy: - Manufacturer: HEIDENHAIN length measuring systems - Resolution linear glass scale: 0.0001 mm - Positioning accuracy X/Y/Z axis: 0.005 mm - Repeatability X/Y/Z axis: ±0.0025 mm Rotary axis accuracy: - High-precision angle encoder for A- and C-axis Hodpfozwxicsx Antet - A-axis positioning accuracy: ± 30" - C-axis positioning accuracy: ± 5" Ball screw (oil-lubricated): - Manufacturer: INA - Pitch: 12 mm - Max. speed X/Y/Z axis: 36,000 mm/min Swivel and rotary axis: - Swivel axis (A): - Swivel range: +120° / -120° - Drive: Worm gear (optional: direct drive) - Brake: hydraulic (1,200 Nm / 50 bar) - Speed: 16.6 min-1 - Rotary axis (C): - Rotation angle: 360° (0.001° increments) - Drive: Direct drive (torque motor) - Brake: hydraulic (2,900 Nm / 50 bar) - Speed: 90 min-1 Swivel and rotary table: - Table diameter: Ø500 x 420 mm - Max. table load: 600 kg - Max. load height: 430 mm - T-slots (number / size / slot spacing): 7 x 14 mm x 75 mm Spindle: - Manufacturer: ROYAL Precision Tools Corporation - Drive type: direct - Spindle motor / SIEMENS motor 1PH8133 - Power S1/S6 (40%): 25/35 kW - Max. torque S1/S6 (40%): 134/261 Nm - Max. speed 15,000 min-1 - Spindle taper: DIN SK-40 / MAS BBT-40 (Option: HSK-A63) - Spindle oil cooler Coolant management: - External coolant supply around the spindle nose - Internal coolant supply through the spindle 20 bar with cartridge filter 40 µm, pumps adapted in the coolant tank - Number of magazine positions: 30 (optional: chain with 32, 48, or 60) - Magazine type: Carousel / Fixed position, coded - with tool change arm (double gripper) - Max. tool length: 300 mm - Max. tool diameter: Ø78 mm - Max. tool diameter: Ø120 mm with locked neighboring positions - Max. tool weight: 7 kg Chip management: - Hinged band chip conveyor Other standard equipment features: - Automatic central lubrication - High-pressure chip flushing / chip shower - Coolant gun - Control cabinet air conditioning - Coolant flushing gun - Work area lighting - 3-color warning light (cycle active / completed / alarm message) - Hand tool kit, leveling bolts, nuts, shims - EMC and safety modules for CE compliance - Portable, electronic handwheel - CE compliant with European directives - Hydraulic and pneumatic supply prepared through the table (3x 80 bar hydraulic and 1x 6 bar pneumatic connection). - Oil skimmer

Condition: used, Year of construction: 2006, x-travel 750 mm y-travel 600 mm Hodpfjvxwxijx Antot z-travel 560 mm Control SIN840D pl table-size 950 x 650 mm workpiece weight max. 1.000 kg feed X/Y/Z/-axis 1 - 90.000 mm/min rapid traverse X/Y/Z 90,00 m/min spindle turning speed - stepless 1 - 18.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 35,00 KW tool taper HSK-A63 tool magazin: 30 tool diameter 80 mm tool diameter with 2 vacant positions 140 mm tool length - max. 300 mm weight of tools max. 10,00 kg total power requirement 58,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 7,00 x 4,00 x H3,50 m Control SIEMENS Sinumerik 840D powerline with ShopMill, EROWA pallet system MTS500, tool breakage control, coolant-unit, coolant through the spindle (23 l/min at 40 bar), chip conveyor, electronic handwheel

Year of construction: 2003, condition: good (used), functionality: fully functional, number of axes: 5, DS Technologie Scharmann ECOSPEED 2600/7800 5-axis high-performance machining center The machine was specifically designed for the highly dynamic machining of large-format aluminum structural components and operates with the parallel kinematic Sprint-Z3 machining head. The machine concept combines two conventional linear axes with the three-axis parallel kinematic head to enable simultaneous 5-axis machining. Manufacturer: DS Technologie Werkzeugmaschinenbau GmbH Product line: Scharmann Machine type: ECOSPEED 2600/7800 Year of manufacture: 2003 Axes: 5 Machining head: Sprint Z3 Machining head kinematics: Parallel kinematics Motor spindle: 75 kW Spindle torque: 72 Nm Hjdpfx Anjzwhunotot Maximum spindle speed: 24,000 rpm Tool holder: HSK-A63 Maximum tool weight: 10 kg Maximum bending moment of tool: 350 Nm Tool balancing quality: G 6.3 Tool clamping: Hydraulic Hydraulic pressure for tool clamping: 120 bar Volume flow for tool clamping: 6.6 l/min Power of hydraulic unit for tool clamping: 1.5 kW Typical application: Structural components for the aerospace industry Mains connection: 3 AC 400 V Mains frequency: 50 Hz Nominal current main machine: 500 A Control system: Siemens SINUMERIK 840 D Tool magazine: Automatic tool magazine Tool change: Automatic Workpiece handling: Integrated large-format workpiece and transport system Machine design: Fully enclosed large machine Chip removal: Integrated Hydraulic unit: Knoll Hydraulik Systeme Operation: Stationary Siemens control panel with additional handheld device The Sprint-Z3 head has three parallel linear drives and enables translational and two rotational movements via the coupled movement of the parallel mechanism. Together with the two linear axes of the machine, the 5-axis kinematics of the ECOSPEED are created. We will be happy to provide further information, videos or drawings upon request.

Condition: good (used), Year of construction: 1999, Control: Siemens 840 D Powerline Tool holder: HSK-A63 Max. rpm: 16,000 X-travel: 3,000 mm Y-travel: 2,500 mm Z-travel: 1,150 mm A-axis: +/- 100 mm C-axis: +/- 181.5 mm Table size: 3,000 mm x 2,500 mm Hodpjzwk E Aofx Antet Option: External blowing air Kinematics: Fork head

Condition: used, Year of construction: 2011, operating hours: 5,051 h, functionality: fully functional, machine/vehicle number: 20, travel distance X-axis: 730 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 800 mm, controller model: PRO 5, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Makino A61nx, 4-axis horizontal machining center, fully functional and can be inspected while powered on. 11,324 hours of power-on time 5,051 hours of operating/runtime 3,253 hours of machining time 4,188 hours of spindle runtime A Travels  X-axis travel (frame) ..... 730 mm  Y-axis travel (spindle) ..... 650 mm  Z-axis travel (table) ..... 800 mm  Distance from pallet surface to spindle center ..... 80 ~ 730 mm  Distance from pallet center to spindle nose ..... 100 ~ 900 mm Hsdpfx Anszw Dzdstet  Linear guides, heavy-duty design, size (roller bearing) ..... #55  Size of ball screws (X, Y-axis / Z-axis) ..... #45 / #50 B NC rotary table (DD motor) C1 Spindle 14,000 rpm (240 Nm)  Tool holder ..... HSK-A63 D Feed drives  Rapid traverse speed ..... 60,000 mm/min  Feed speed ..... 1 ~ 50,000 mm/min  Feed speed (jog mode) ..... 1 ~ 8,000 mm/min Tool magazine  Storage capacity ..... 60 tools  Maximum tool diameter with space allocation ..... 170 mm  Maximum tool diameter without restrictions ..... 70 mm  Maximum tool length ..... 510 mm  Maximum tool weight ..... 12 kg Tool change time increases for tool weights over 8 kg.  Maximum imbalance relative to the gripper groove ..... 11.7 Nm  Maximum total weight of all tools in the magazine ..... 180 kg  Tool-to-tool change time (without door movement) ..... 0.9 s  Chip-to-chip time (ISO method) ..... 2.8 s  Tool ready time in the magazine (min./max.) ..... 3.1 / 6.1 s Drives  Main drive ..... AC15 kW  Feed drives (XYZ axes) ..... AC4 kW  Table (indexing table) ..... AC0.9 kW

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details x-travel 2500 mm Hsdpfszvm Abjx Antjt y-travel 920 mm z-travel 820 mm Control Heidenhain iTNC 530 table surface area 3100 x 900 mm table load 3,0 t tool taper HSK-A63 spindle turning speed range 20 - 18000 U/min rapid traverse (X,Y,Z) 100 / 60 / 60 m/min main drive (S1/S6) 35 / 25 kW total power requirement 92 kVA weight of the machine ca. 25,6 t dimensions of the machine ca. 10,3 x 6,2 x 3,3 m In April 2026, a new milling spindle from DMG-MORI was installed. * 4-axes controlled * CNC control HEIDENHAIN iTNC 530 * Autom. swivel-type milling head (B-axis) +/- 105 deg. * 120-station ATC * Chip conveyor * Tool measuring device (laser) * Measuring probe (workpiece) * Electronic handwheel * Control cabinet with air conditioning Machine will be sold without clamping devices, vise, and tools.

Condition: used, Year of construction: 2014, operating hours: 24,209 h, functionality: fully functional, machine/vehicle number: 286-56, total height: 3,000 mm, total length: 4,545 mm, total width: 2,450 mm, table width: 860 mm, table height: 975 mm, overall weight: 10,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, For sale is a CHIRON FZ15 W Magnum high-speed machining center (Type 286-56) from 2014. The machine is a fast, single-spindle traveling column machine with an integrated workpiece changer and a FANUC control (31i series), designed for productive series machining of metal and plastic parts (milling, drilling, threading, reaming, boring). Technical data: Control: FANUC 31i Travel ranges X/Y/Z: 730 / 400 / 360 mm Rapid traverse X/Y/Z: 75 m/min Spindle speed max.: 12,000 min⁻¹ Spindle power: 7.5 – 15.0 kW Spindle torque max.: 95 Nm Tool holder: HSK-A63 Tool magazine: Chain magazine, 48 positions Max. tool length: 300 mm Max. tool diameter: 78 mm (140 mm with free adjacent position) Hsdpfxezv Tlvo Antot Max. tool weight: 8 kg (10 kg with reinforced positions) Workpiece changer (tandem/tilting device), bridge dimension 800 mm, max. fixture height 234 mm Enclosed cabinet, coolant emulsion Equipment / Peripherals: Coolant system TPF 350S (Bürener) with paper band filter and double safety filter, filling volume approx. 980 l Tool internal cooling (high pressure through spindle) Chip conveyor Extraction system / emulsion mist separator (Handte, EM Compact 800) Control cabinet cooler Oil central lubrication Table measuring probe Renishaw TS27R Coolant gun Energy-saving and warm-up functions (PowerSave / WarmUp) Connection values: Electrical connection: approx. 27 kVA, connection M40 Compressed air: min. 5.5 bar, approx. 510 Nl/min Coolant connection DN40 Dimensions / Installation: Footprint approx. 4,543 × 4,441 mm (L × W, incl. peripherals) Height approx. 2,405 mm (max. 3,042 mm with extraction system)

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, table load: 500 kg, overall weight: 18,000 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Hyundai Wia HI-MOLD 750-5A vertical machining centre was manufactured in 2014. It features a spindle speed of 20,000 RPM, a tool magazine with 30 slots, and a rapid traverse rate of 50 m/min in all axes. The table can handle up to 500 kg, tilting from +30˚ to -120˚. Consider the opportunity to buy this Hyundai Wia HI-MOLD 750-5A vertical machining centre. Contact us for more information about this machine. Machine Benefits Hjdpfozvv Dbsx Antst Technical Machine Benefits • Table size: Ø630 mm • Tilting angle: +30˚ ~ -120˚ • Tool change time (c-c): 6. 5 sec • Tool shank: hsk-a63 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 850 mm, overall weight: 27,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis Rambaudi RF103 was manufactured in 2008. It features a maximum spindle speed of 18,000 rpm and a robust table size of 1,900 x 1,200 mm. The machine includes a tool changer with 24 positions, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the Rambaudi RF103 vertical machining centre we have for sale. Contact us for further details. Hjdpozvu Swjfx Antst • Spindle: • Type: Electrospindle • Tool interface: HSK-A63 • High-pressure coolant: 20 bar • Table: • Type: Fixed • Size: 1,900 x 1,200 mm • Tooling: • Tool changer: 24 positions

Condition: used, Year of construction: 2009, Technical details: x-travel: 600 mm y-travel: 770 mm z-travel: 675 mm A-Axis travel: -180 ... +45 ° b-axis: 360,000 ° spindle drive: 40 / 52 (100% / 40% ED) kW spindle turning speed range: 10000 U/min Tool bore: HSK-A63 numbers of tools in magazin: 40 total power requirement: 47 kW weight of the machine ca.: 13 t including additional tool magazine ZM 182 Hedpfxsqy Sr Ss Antjt 1 spindle , 5 axes *

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm weight of the machine ca.: 17 t dimensions of the machine ca.: 6 x 3 x 3,2 m Diameter of the table: 770 mm max. table load: 800 kg tool taper: HSK-A63 max. tool length: 465 mm no. of tools in magazin: 60 spindle turning speed range: 12.000 U/min feed power: 8 kN kp power capacity: 25/35 kW 5 axis Hodpfx Aet Rmd Ientet G550-1024 HSK A-63 Grob (Bezeichnung G550-1024) 1 spindle *

Condition: ready for operation (used), Year of construction: 2011, - USED - TWIN-SPINDLE HEAD 3-AXIS VERTICAL MACHINING CENTRE WITH ROTOPALLET X-AXIS TRAVEL: 520 mm Y-AXIS TRAVEL: 360 mm Z-AXIS TRAVEL: 360 mm DISTANCE SPINDLE NOSE-TABLE: 200-560 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 36 - 10500 rpm; 30 - 35 kW; HSK A63 PALLET: N.2 Hedpfx Anjx U E Szotot MAX ADMITTED LOAD: 450 Kg TOOL MAGAZINE: 21X2 POS MAX TOOL DIAMETER: 88 (125) mm MAX TOOL LENGHT: 250 mm CONTROL UNIT: FANUC 31i A5 WEIGHT: 5300 Kg OVERALL DIMENSIONS: 3200 x 3250 x 3245 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; HIGH PRESSURE COOLANT PUMP ; TOOL SETTER NOTE: WITH No 1 4th AXIS TABLE

Condition: used, Year of construction: 2015, functionality: fully functional, Model: OKUMA MULTUS U3000 2SW 1500 (CNC turning and milling center) Control: OKUMA OSP-P300S Turning length: approx. 1,500 mm Max. turning diameter: up to 650 mm Tool system / interface: HSK-A63 Main spindle: Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm (2 gear stages) Spindle nose: Short taper size 6 Spindle front bearing: Ø 120 mm Spindle bore: Ø 80 mm 3. Counter spindle (Okuma motor spindle) Travel: Traversable on the W-axis Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm Spindle nose: Short taper size 6 Spindle front bearing: Ø 100 mm Spindle bore: Ø 62 mm Tool spindle / Milling spindle (Okuma motor spindle) Drive power: 22 kW Torque: 120 Nm Max. speed: 12,000 rpm Tool holder: HSK-A63 Axes & Travel Ranges C-axis: 360° (Indexing / Positioning in 0.001° increments) Y-axis: Stroke +125 mm / -125 mm (Total stroke 250 mm) B-axis: 240° (Indexing / Positioning in 0.001° increments) Tool magazine & Turret Tool Magazine (ATC): 120 positions Lower turret: 12 stations with direct mounting system "radial" Turret guides: ZB-axis with cylindrical roller linear guide Hedpfx Anozu I U Aetot XB-axis with slide guide Coolant supply / Internal coolant supply (ICS): max. 20 bar (including bag filter) External cooling for tool spindle: max. 8 bar Accessories: Short loader LNS Quick Load Seri O III

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine approx.LxWxH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. Hsdpfx Aoytcf Uentet *

Condition: ready for operation (used), Year of construction: 2008, - USED - 5-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE     X-AXIS TRAVEL: 1750 mm Y-AXIS TRAVEL: 1400 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS X-Y-Z: 35 m/min SPINDLE: 18000 rpm; 18,5-25 kW; HSK A63 TABLE SIZE: 1000 x 1200 mm MAX ADMITTED LOAD: 5000 Kg TOOL MAGAZINE: A CATENA ; 30 POS HEAD: A/B AXIS AUTOMATIC Hedewl R Ddepfx Antst CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6000 x 4000 x 3850 mm ACCESSORIES: SWARF CONVEYOR ; LASER TOOL SETTER ; PORTABLE HANDWHEEL

Condition: used, Year of construction: 2007, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, overall weight: 8,300 kg, Mikron HSM 800 – High Speed Machining Center Year 2007 | Heidenhain iTNC 530 | 24,000 rpm | 3-pallet changer High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC applications such as mold & die, graphite and electrode machining, as well as flexible production. Travels: X 800 mm / Y 600 mm / Z 500 mm with pallet size 800 x 600 mm. Equipped with a 3-pallet changer for efficient automated operation. The machine features a high-speed spindle up to 24,000 rpm with HSK-A63 interface and a 50-position tool magazine. Well equipped with high-pressure through-spindle coolant (18–70 bar) including band filter system, chip conveyor, minimum quantity lubrication, oil mist extraction, rotating viewing window and probing system (M&H). Additional features include APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process stability and thermal accuracy. Control: Heidenhain iTNC 530 Hodpfx Aoy Tkc Aontot Spindle speed: 24000 - rpm Travel Y-axis: 600 - mm Dimensions of the clamping surface: 900 x 600 mm Travel Z-axis: 500 - mm Travel X-axis: 800 - mm Dimensions (LxWxH) approx.: 3000 x 2500 x 2800 mm Weight approx.: 8,300 kg Year of construction: 2,007 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: new, diameter / mm Cutting (quantity) / weight / kg Spindle type: 180.6.C1/FS/19-1.1/15-1D/165/HSK-A63 Ident No.: 180.6C1/x003618B2 Hedpfx Aeuddgrsntot Milling spindle for Starrag Heckert CWK 400D.

Condition: not inspected (used), diameter / mm Hsdpsxn Aqfsfx Antjt Cutting (quantity) / weight / kg Spindeltyp: 195.6/S/48-7.7/20-1D/60HSK-A63 Ident-No.: 195.6/x000917B2 Milling spindle is sold as untested !