Used Komplettrad 340/85R28 Für Mf for sale (4,667)

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: Pedpfjqt Dmyox Afgspt - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2026, Dosing ranges: 1 ml - 38 ml 2 ml – 100 ml 5 ml – 250 ml 20 ml – 680 ml 50 ml – 1,500 ml Volumetric filling Under-surface filling possible Ppsdpfx Afowpr Uxoget Special "Anti-Drop" device Adjustable filling nozzle Pump and filling nozzle made of stainless steel AISI 316 L Automatic cap application Stepless torque adjustment of the screwing system Closing system for plastic caps Touch display control The products can come from the food, cosmetics, pet food, oils, chemicals and other industries (always subject to technical evaluation). The pouches are manually hung into a special rail feed system. Then the machine transports the empty pouches into the star. There, the pouches are volumetrically filled, the caps are automatically applied and then automatically closed. The torque is adjustable. The machine is compact and very versatile. Also available as a semi-automatic monoblock.

Condition: like new (used), functionality: fully functional, machine/vehicle number: VF7YBBPFBPG068383, mileage: 17,556 km, first registration: 07/2024, fuel type: diesel, empty load weight: 1,955 kg, maximum load weight: 1,270 kg, overall weight: 3,300 kg, fuel: diesel, color: white, number of gears: 6, emission class: euro6, number of seats: 3, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), onboard computer, power assisted steering, power mirror, sliding door, soot filter, tire pressure monitoring, traction control, truck registration, DAB MP3 radio with Bluetooth and USB socket Speed regulator and limiter Electrically adjustable and heated mirrors Driver's seat with armrest, lumbar support and height adjustment Two-seater passenger bench Rear parking sensors ABS + Emergency braking assistance Driver airbag Front electric windows Electronic immobiliser 6-speed manual gearbox Central glove compartment and document holder Ppjdpeyylw Isfx Afget Central locking Manual air conditioning ESP Darko fabric interior Fixed steel bulkhead Integrated headrests Right-hand sliding side steel door Cup holder and open dashboard storage compartment Power steering Thermal insulating windows

Year of construction: 2025, condition: excellent (used), Separator TSP.155 Psdeyvrzxepfx Afgopt The separator features five shafts, providing more space within the unit for the material to be loosened along the running/rotational direction of the shafts. The shafts are arranged in the housing at a 15° angle to each other, creating a progressive rounding effect as material is guided into self-rotation even before full engagement. This results in a significantly higher throughput and improved material quality compared to units with fewer shafts. Shafts BS252 Equipped are BS252 block disc shafts designed to break up very wet and stubbornly compacted soils, crush clods of earth, and efficiently mix additives such as lime or compound binders at high throughput rates. With this configuration, the Terra-Star enables soil processing long after other equipment would need to be withdrawn from use. For excavators from 27 tons Weight in kg: 2700 Throughput: up to 120 m³/h Leak oil line required: 1 Series: 252

Year of construction: 2010, operating hours: 1,480 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1873076, We are offering this very well-maintained Uhde high-pressure pump for waterjet, HPS 4022, year of manufacture 2010. Manufacturer: Uhde High-Pressure Pump for Waterjet Model: HPS 4022 Year of Manufacture: 2010 Condition: Very good Category ID: 34 Machine Type: Uhde HPS Waterjet High-Pressure Pump If you have any questions or require further information, please feel free to send us a message or give us a call. Psdpfjygmhtjx Afgept

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Podpfx Afsx Sc Inegjpt Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Year of construction: 2026, condition: like new (used), Binder dispenser / lime spreader, used for a short-term rental. The dispenser features an integrated weighing system with display; the 18V battery system is from Makita and is thus independent of any external power source. An OilQuick 70/55 adapter plate is installed but can be changed if required. Feel free to contact me with any questions. Best regards, Jürgen Wolf. Suitable for excavators from 15 t. Required drain line: 0. Ppodpsyupynsfx Afgot

Year of construction: 2019, condition: used, We are selling several used marking, beading, drawing, thread embossing, and tabbing tools from Pass Stanztechnik that were used on our Trumpf TruMatic 7000. We also have various smaller tools as well as spare and wear parts available. A complete list can be sent via email. Ppjdpfjyu Tl Uox Afget

Condition: new, Year of construction: 2024, The conveyor belt TYPE L is used to feed or remove products and waste of all kinds in vegetable processing and transportation. Pedpfsrckn Rjx Afgept ProdMa configures the conveyor belt according to the customer's requirements! The ALPHA 30 AA BLUE belt, equipped with guide rails and dividers, is ideal for transporting various foodstuffs and has been verified for the food industry.

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding Ppsdpfx Aoykud Dsfgst F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: good (used), The scope of delivery includes: 01x depth bar, used Material color: sendzimir galvanized total length: approx. 1.110 mm suitable f. depth of upright: approx. 1.100 mm clear span: approx. 1.000 mm profile dim.: C 70 x 50 x 15 mm crossbeam support: approx. 50 mm weight/pc.: approx. 3,02 kg Psdpfx Afjld S Ufegspt

Condition: good (used), The scope of delivery includes: Podpfelhp Tcex Afgopt 198x depth bars, used Material color: sendzimir galvanized total length: approx. 1.110 mm suitable f. depth of upright: approx. 1.100 mm clear span: approx. 1.000 mm profile dim.: C 70 x 50 x 15 mm crossbeam support: approx. 50 mm weight/pc.: approx. 3,02 kg Note: The unit price is only valid for a purchase quantity of at least 198 pcs (01x pallet).

Condition: as good as new (ex-display), Suitable for shelf rack: Shelving system: SSI Schäfer Type: R 3000 Included in delivery: 01x crash barrier, II. choice Material color: yellow/ black/ galvanized total height: 400 mm total depth: 180 mm clear width: 500 mm Consisting of respectively: 01x CS Sigma profile, II. choice Material color: sendzimir galvanized profile dim.: 300 x 75 x 15 mm Profile type: CS300-2.0 material thickness: 2,0 mm length: 400 mm 02x L - collision protection corners, new material color: yellow/ black according to DIN standard total height: 400 mm leg length: 170 x 170 mm material thickness: 5 mm Ppedoib H D Ejpfx Afget Weight/piece: 6,10 kg 08x screws: M12 08x nuts: M12 16x washers: M12 The crash barrier is delivered completely pre-assembled.

Condition: new, Included in delivery are: 01x Depth web frame, new with push-through protection material color: sendzimir galvanized for upright depth: 1.100 mm total depth: 1.200 mm total width: 850 mm support angle: 1.200 x 100 x 50 mm cross connector: 850 x 35 x 35 mm Material thickness: approx. 3 mm Weight/piece: approx. 12.00 kg These are goods to order with at least 10 working days delivery time! Remark: The depth web frame and the integrated integrated push-through protection prevent the transverse and lengthwise storage of containers, pallet cages and pallets. and pallets from slipping off the storage unit. They also serve to stabilize the pallet storage in the rack. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Psdpfx Afjbh Ia Tsgjpt

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: orange Manufacturer: Vogelsang Type: NS suitable for frame profile width: approx. 100 mm for shelf distance: approx. 200 mm Podpji Hph Sjfx Afgept dim. head plates: 128 x 90 mm profile dim.: C 46 x 23 mm Weight: approx. 1,200 kg | pcs. General information about the article: This article is offered for pick-up only. Any additional transport or shipment of this article is associated with additional costs, which can be requested separately from us. depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: Ppjdpfx Ajir U Trsfgjt 01x shelf connector, used Material color: galvanized Manufacturer: SSI Schäfer Type: PR350/400 total length: approx. 340 mm clear width (shelf distance): approx. 257 mm Hole diameter: approx. 25 x 10 mm profile dim.: approx. U 80 x 50 mm Weight/pc.: approx. 1.52 kg

Condition: good (used), We offer here a used rear wall grille holder for sale. Included in delivery are: 01x holder f. rear wall grille, used material colour: sendzimir galvanized dimension leg A: approx. 115 x 85 mm dimension leg B: approx. 50 x 85 mm distance back wall grid: approx. 85 mm oblong hole dim.: approx. 21 x 10 mm distance center-center-hole: approx. 50 mm Weight/piece: approx. 0,403 kg Shipping costs on request Psdpfsgyfxpox Afgept

Condition: as good as new (ex-display), Suitable for shelf rack: Shelving system: SSI Schäfer Type: R 3000 Included in delivery: 01x crash barrier, II. choice Material color: yellow/ black/ galvanized Podpsib H Dtefx Afgjpt total height: 400 mm total depth: 180 mm clear width: 400 mm Consisting of respectively: 01x CS Sigma profile, II. choice Material color: sendzimir galvanized profile dim.: 300 x 75 x 15 mm Profile type: CS300-2.0 material thickness: 2,0 mm length: 300 mm 02x L - collision protection corners, new material color: yellow/ black according to DIN standard total height: 400 mm leg length: 170 x 170 mm material thickness: 5 mm Weight/piece: 6,10 kg 08x screws: M12 08x nuts: M12 16x washers: M12 The crash barrier is delivered completely pre-assembled.

Condition: good (used), Technical data: Manufacturer: Stow Type: Pal Rack NS Included in delivery: 01 x console, used Usage: for push-through safety devices in a double rack row Article description: SPSD 40 Ppodpfx Asm Ezw Uofgot total length: 300 mm total height: 75 mm opening rectangular tube: B 52 x 42 mm Material color: sendz. galvanized Weight: 0,51 kg | pcs.

Condition: new, The scope of delivery includes: 01x stage support, new Manufacturer: SSI Schäfer design: corner connection / 90 suitable for CS Sigma profiles Pjdpfx Aemv Dyzefgjpt with a profile height of 300 mm type of screw connection: internal Material color: sendzimir galvanized Technical data of the stage support: Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm

Condition: good (used), We offer here a used rear wall grille holder for sale. Included in delivery are: 01x holder f. rear wall grille, used material colour: sendzimir galvanized dimension leg A: approx. 90 x 320 mm dimension leg B: approx. 30 x 135 mm Pjdpfx Ajgyfxwefgept distance back wall grid: approx. 180 mm slotted hole dim.: approx. 52 x 9 mm Distance center-center-hole: approx. 60 mm Weight/piece: approx. 0,524 kg Shipping costs on request

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: sendzimir galvanized L-profile dim.: (see below) 298 x 81 mm (4 round holes Ø 9 mm) 250 x 30 mm (one oblong hole) center-center round hole: 278 | 50 mm shelf distance: approx. 250 mm Weight: approx. 0,600 kg / pc. Ppsdpsi Dtcnofx Afgot 04x hexagon bolts, M8 x 20 8.8. 04x hexagon nut, M8 04x washers, M8 General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Year of construction: 2018, condition: used, The separator is from a well-known customer who has vacated the storage area where it was previously in use. With the installed screening discs, you achieve a grain size of 0-45/50 mm. Mixing in of additives is also possible in the same operation. The separator breaks up clods of soil and separates stones, roots, and branches from the reusable soil. When used as a feeder for a screening plant, performance increases by approximately 30% and waste/screen overflow is reduced by 60%, as the clods are already broken up. Other shafts can also be installed in the separator at any time. Conversion time: 40-60 min (patented shaft coupling) New prices: Mixing shafts M80X, grain size 0-60/80 mm: €10,567 Mixing shafts with block disc BS252, grain size 0-45/60 mm: €14,066 Used units, if available, correspondingly cheaper. An overflow plate is installed to prevent soil from spilling onto the wheel loader and to increase capacity by about 1/3. Ppsdpeyf A Erofx Afgjt Included in the price is also the adapter for Volvo L50-120 type wheel loaders. Further technical information can be found in the datasheet in the images or on our website. For wheel loaders from 15 t Weight (kg): 3450 Drain line required: 1 Series: TSP.263.001

Year of construction: 2024, condition: used, machine/vehicle number: TSC.153.042, Wolf Bucket Separator Terra-Star Compactline TSC.153 continually astonishes customers with its high throughput. The TSC.153 requires only 20 to 30 seconds for a capacity of 0.95 m³. With 50 fillings, this results in well over 45 m³ per hour. Ppjdpow Rqz Eefx Afgst The ability to quickly and easily change the shafts makes the Terra-Star Compactline series unique in the market. The separator is equipped with screening shafts and star discs with a separation gap of 15mm – producing a grain size of 0-20/25 mm. Tools in the wear zones are armoured with hardfacing wire. Price without adapter For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 34 - 50 m³/h Drain line connection required: 2

Year of construction: 2025, condition: new, Terra-Star Powerline TSP.184, cutting width 1800 mm, this machine delivers exceptional throughput thanks to its 4 shafts! Podpfxoyf Avkj Afgopt Equipped with M80X mixing shafts, armored in wear zones—providing a grain size of 0–60/80 mm. Suitable for mixing lime and blended binders, breaking up clumped material, and separating stones, branches, roots, etc. Price without adapter For excavators from 32 t For wheel loaders from 17 t Weight in kg: 3100 Throughput: 78 – 120 m³/h. Leak oil connection required: 1 Series: TSP.184.023