Used Sleepslang 4,5” for sale (358)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,161 h, load capacity: 1,600 kg, lifting height: 2,940 mm, free lift: 1,400 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, battery capacity: 460 Ah, battery voltage: 48 V, fork length: 1,150 mm, tire condition: 60 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,195 kg, total height: 2,000 mm, total length: 1,900 mm, total width: 1,070 mm, fuel: electricity, Equipment: sideshift, LINDE E 16C - 02 – Electric 3-wheel forklift TECHNICAL DATA Blsdpfxez Aqp Ss Ahmjn Lifting capacity: 1.600 kg Lifting height: 2.940 mm Closed height: 2.000 mm Free lift: 1.400 mm Mast: Duplex (2F294) Fork length: 1.150 mm Fork carriage: 2A Drive: Elektro 48V Battery: 48 V 460 Ah v. 2019 Charger: ohne / Without Tyres: Superelastik SE 18 x 7 - 8 (60%) / 15 x 4,5 - 8 (50 %) Service weight: 3.195 kg Length: 1.900 mm Width: 1.070 mm Year of manufacture: 2019 Operating hours: 3.161 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Pulse control ATTACHMENTS Sideshift Internal no.: 1309225 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 14.000 min/-1 power capacity - main spindel 18,9 / 14 kW max. Torque 100 Nm tool taper HSK A-63 table surface area 630 x 500 mm max. table load 300 kg Swivel range -5 / +110 ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm rapid traverse 24 m/min Feed force 4,8 kN feed speeds 1 - 24.000 mm/min total power requirement 25 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DMG MORI SEIKI - DMU 50 Bsdpfezyu Umex Ahmjln - 5 Axis - swivable rotary table

Condition: like new (used), load capacity per storage section: 11,000 kg, total length: 25,000 mm, total height: 4,500 mm, total width: 1,050 mm, shelf height: 4,500 mm, support length: 2,700 mm, shelf length: 25,000 mm, load capacity: 11,000 kg, carrying capacity per cantilever arm: 3,500 kg, load capacity per stand: 11,000 kg, frame height: 4,500 mm, load per truss pair (max.): 3,500 kg, frame width: 1,050 mm, axle spacing: 2,700 mm, transport width: 2,400 mm, transport height: 1,100 mm, transport length: 4,600 mm, SSI Schäfer PR600 pallet racking, approx. 25 linear meters, used 🧰 Product features • Manufacturer: SSI Schäfer • Color: galvanized / blue / orange • Condition: used, see photos • Frames: 10 pcs, pre-assembled 450 x 105 cm • Beams: 36 pcs, with 270 cm clear width, I-beam 100 x 50 mm • Safety: 72 pcs, galvanized safety pins • Fasteners: 40 pcs, Hilti concrete anchors • Load capacity: 3,500 kg per level • Field load: 11,000 kg • Load capacity sign: included Over 5,000 linear meters in stock Frame heights up to 10 meters Available depths: 100, 105 cm, and 110 cm Available beam lengths: 180, 190, 200, 270, 330, 360 cm, and 370 cm Matching depth beams, shelf inserts, and shelf panels available on request 💰 Price: €1,950.00 net, excluding VAT • Quantity discount: on request Blodpfx Ajd Hkv Nshmon • Shipping costs: Europe-wide, on request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P1944 Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock (Subject to change and errors in technical data, information, and prices as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description text: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology throughout the DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelf racking, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a genuine all-round carefree package: 1. Flat-rate purchase: purchase of merchandise, equipment & entire stock including complete clearance. 2. Commission auction: carrying out auctions on commission. Our full service through our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling, and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a quote.

Condition: used, machine/vehicle number: 2482738, Year of construction: 2023, load capacity: 5,000 kg, lifting height: 3,000 mm, fuel type: electric, construction height: 2,300 mm, color: red, fuel: electricity, Equipment: UVV, cabin, pallet forks, * Rated load capacity at LSP: 5 t * Tyres: SE 2x/2 * Overall width: 1380 mm * Overall height: 2300 mm * Load center: 500 mm * Voltage: 80 V * Drive motor(s): 16.6 kW Bodpfx Ahjyqyqvemoln * Lift motor(s): 25.4 kW * Own weight: 7.1 t * Turning radius: 2.72 m * Lifting height: 3 m * Travel speed with/without load: 13/13.5 km/h * Lifting with/without load: 0.26/0.40 m/s * Lowering with/without load: 0.50/0.30 m/s

Condition: used, Year of construction: 1996, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Calendar Binding Machine, Binding Size: 600 x 700 mm Fully automatic calendar punching and binding line. Automatic calendar hanger insertion. Max Punching Thickness per Stroke: 4,5 mm (depending on pitch, material and width), Bljdpsz E S I Sofx Ahmsn Standard Binding Dia: 1/4" & 5/16", Standard pitch 3:1", Variable speed: 500 to 2300 pieces/hour, depending on size, thickness and quality of materials. Complete with exit conveyor. Mechanical Condition: Very Good Power requirements: 400 V, 3-phase. External air supply required. Delivery and installation service available. (POA)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 11,415 h, load capacity: 1,600 kg, lifting height: 4,610 mm, free lift: 1,440 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, battery capacity: 550 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,237 kg, total height: 2,060 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-16 / 6211 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.610 mm Closed height: 2.060 mm Free lift: 1.440 mm Mast: Triplex (3F461) Fork length: 1.200 mm Fork carriage: 2A Bjdpez Apqhjfx Ahmsln Drive: Elektro Battery: 48 V 550 Ah v. 2016 Charger: 48 v 140 A not tested Tyres: Superelastik SE 18 x 7 - 8 (70%) / 15 x 4,5 - 8 (80%) Service weight: 3.237 kg Year of manufacture: 2016 Operating hours: 11.415 h Condition: working condition EQUIPMENT 3rd valve, Overhead guard cover, Front windscreen, Load backrest, Pulse control ATTACHMENTS Load backrest, Sideshift Internal no.: 1308673 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2001, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 23200 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. Bljdpfxjwirkgo Ahmjn • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 450 mm, roll pitch: 60 mm, total width: 540 mm, total height: 270 mm, total length: 4,500 mm, conveying length: 4,500 mm, construction width: 540 mm, construction height: 270 mm, power: 0.37 kW (0.50 HP), overall weight: 200 kg, TAF item number: 1000006171 Manufacturer: AMI Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 4,500 x 540 x 270 Width including side rail in mm: 540 Side rail height in mm: 120 Conveyor length in mm: 4,500 Conveyor width in mm: 450 Conveyor height in mm: 280 Roller pitch in mm: 60 Blsdpfxoza A Hfe Ahmen Support roller axle type: Steel Support roller diameter: 50 mm Support rollers per axle: 1 Support roller material: Steel Drive: Head drive Motor type: Geared motor Motor data: SEW, 0.37 kW Motor position (in conveying direction): left Conveying speed in m/s: 0.3 Net weight in kg: 200 Condition: used / fully functional Functional test: OK

Condition: used, Year of construction: 2014, x-travel 1740 mm y-travel 760 mm z-travel 660 mm Control PC-Fusion-640M spindle taper SK 40 spindle turning speed range 40 - 12.000 U/min spindle motor 30 kW Bljdpfx Ahszz Afijmsn distance spindle centre table top edge 180 - 840 mm table load 1400 Kg distance spindle center to column 830 mm rapid travel x/y/z 36 m/min table width 760 mm table length 2000 mm 5-T-slots - width x distance 18 x 125 mm table height over floor 825 mm tool change unit 30 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 110 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 140 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 360 l high-performance coolant system 15 bar total power requirement 22 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 3,5 x 3,1 m Standard Equipment / Included Accessories - Through-Spindle High-Pressure Coolant System (15 bar) - Manual Pulse Generator (MPG) - Hinged Belt Chip Conveyor, Right-Hand Side Discharge - Torque-Controlled Chip Breaking Drilling Cycle - Performance Software Package Performance Software Package Includes - 600 User Variables - MAZAK Tornado Boring & Tapping Cycle (EIA/ISO) - Synchronous Tapping - EIA/ISO Program Input - Extended EIA/ISO Functions - G93 Inverse Time Feed - G37 Automatic Tool Length Measurement - Sequence Number Comparison Stop Function - G0 Inclination Constant - Additional Work Coordinate Systems (G54.1) - Thread Cutting Function General Machine Features Adaptive Feed Control (AFC) The Adaptive Feed Control system continuously monitors spindle motor load and feed axis servo load. If a significant deviation from the programmed load is detected, the feed rate is automatically adjusted to maintain optimum cutting conditions, improve productivity and protect the cutting tool. - MAZAK Standard Machine Colour Safety Equipment - Operator Safety Door with Interlock Switch - Fully Enclosed Splash Guard - Integrated Work Area Lighting - CE Conforming Machine Coolant System Through-Spindle Coolant (TSC) - Through-spindle coolant system - Pump pressure: 5 bar Complete coolant system including pumps, valves, piping and coolant nozzles for efficient machining and reliable chip evacuation. Measuring System Automatic Tool Length Measurement Automatic measurement of small-diameter tools without operator intervention. Chip Disposal Machine prepared for side-mounted chip conveyor CNC Control - MAZATROL PC Fusion CNC 640M - 10.4" Colour LCD Display - Relocation Detector MAZAK Tornado Boring & Tapping Cycle (MAZATROL) Helical interpolation allows boring and tapping operations over a wide range of diameters using a single tool, significantly reducing programming time and machining time while increasing flexibility. Background Tool Path Verification Tool paths can be verified in the background while another NC program is being executed in automatic mode. Machining Navigation – Prediction Prior to machining, the control predicts machining time, spindle load and other operating parameters, allowing programs to be optimized for maximum productivity. Machining Navigation – Monitoring Real-time display of machining conditions and machine loads with continuous feedback for process optimisation. Machining Navig...

Condition: good (used), Year of construction: 2012, Ref. -No.: 10659 Manufacturer: DECKEL MAHO Type: DMC 835V Year of construction: 2012 Type of control: CNC Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Blsdpfjzw Tw Ujx Ahmjn Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement.

Condition: used, SPE Renergi Low Temperature Dryer. Bsdpjzvq Rcjfx Ahmjln The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: good (used), Year of construction: 2005, functionality: fully functional, conveyor belt length: 4,500 mm, conveyor belt width: 400 mm, conveyor belt speed: 300 mm/s, total length: 4,500 mm, total width: 620 mm, total height: 350 mm, overall weight: 110 kg, discharge height: 350 mm, power: 0.37 kW (0.50 HP), input frequency: 50 Hz, Equipment: type plate available, Manufacturer: Overbeck Year of manufacture: 2005 Overall dimensions (LxWxH) in mm: 4,500 x 620 x 350 Width including side frame in mm: 510 Width including drive unit in mm: 620 Side rail height in mm: 140 Conveyor length in mm: 4,500 Conveyor width in mm: 450 Belt type: PVC, longitudinal groove Belt width in mm: 400 Blodpjyzrncofx Ahmjn Substructure: None Running surface: Steel Drive: Head drive Motor type: Geared motor Motor data: 0.37 kW, 50 Hz Motor position: Right Conveyor speed in m/s: 0.3 Net weight in kg: 110 Condition: Used / fully functional Functional test: OK

Condition: used, Year of construction: 2011, weight max. in kg 2000 kg stroke 3,3 mm fork length 1200 mm battery 48V / 575Ah weight of the machine ca. 4,5 t dimensions of the machine ca. 1,2 x 3,5 x 2,19 m Electric forklift with charger. Only 2500 operating hours Bjdex I Sfzepfx Ahmsln New battery in 2017 3.3-meter duplex mast 2000 kg lifting capacity 2.19-meter clearance height With side shift and fork adjustment Very good condition

Condition: good (used), Year of construction: 2008, Ref. -No.: 10660 Manufacturer: DECKEL MAHO Type: DMC 835 V Year of construction: 2008 Type of control: CNC Control: Siemens 840D mit Shopmill Storage location: Halberstadt Country of origin: Germany X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Main spindle drive power: 14 kW Table Dimensions (Lengthxwidth): 1000 x 560 mm Table Load: 800 kg Tool Taper: SK 40 Numbers Of Tools In Magazin: 20 Bedpezw Txfsfx Ahmjln Turning Speeds: 10000 RPM Max. Workpiece Weight: 4,5 t Further information: - Chip conveyor - Handwheel The machine can be inspected while powered on by prior arrangement.

Condition: used, Year of construction: 2015, Technical details: lifting capacity: 0,8 t span width: 4375 mm Arm length: 4375 bis Kranhaken mm height lower edge cantilever arm: 3660 mm cantilever arm length from center column: 4650 mm lifting height max. hook position: 3300 mm column diameter: 410 mm rotation: momentan ca. 100° begrenzt ° total power requirement: 1,8 kW The pillar-mounted slewing jib crane consists of the following main groups: Boom Bodpfx Ahsu Nvmqjmoln Hoist: Vetter chain hoist type SICH6BF, lifting height 2000mm, hook Ø 43mm with rope safety device; load chain type 7 x 20 double chain Support column H: 4000mm with flange Ø 610mm Crane control via pendant control Beam Manual operation (slewing) Chain hoist on beam *

Condition: used, functionality: fully functional, Manufacturer: unknown Year of manufacture: unknown Overall dimensions (L x W x H) in mm: 4,500 x 1,150 x 700 Width including drive: 1,050 Conveyor length in mm (retracted): 4,500 Conveyor length in mm (extended): 12,500 Conveyor width in mm: 700 Conveyor height in mm: 640 Load capacity between 2 supports in kg: 20 Support roller axle type: Steel Support roller diameter in mm: 40 Support rollers per axle: 1 Support roller material: Steel Roller pitch in mm (retracted): 50 Roller pitch in mm (extended): 115 Drive: 10 x motor stations Motor manufacturer: SEW Bledpfx Ahezrr U Ijmjn Motor specifications: 0.12 kW (total 1.2 kW), 230 V Conveyor speed in m/s: 0.7 Net weight: 360 Special features: Emergency stop, Schuko plug, Steinmetz circuit Condition: used / fully functional Functional test: OK

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Bodpfx Ahox Ihiismoln Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2005, OPTIMIZATION CROSS CUT LINE STROMAB TR350 MATRIX 4-7000 Loading chains for automatic loading. 8 chains, lenght 1.500 mm Loading pusher 7.000 mm 4 optimization criteria Automatic knot removal, fluorescent chalk marking Cutting head. Diameter: 350 mm. 4 HP Cutting section capacity: 150 mm x 80 mm,...., 210 mm x 30 mm Blodezcy Ncopfx Ahmen Classifier unloader with 2 fast pneumatic ejectors. Conveyor with variable speed Year 2005 CE

Condition: excellent (used), mileage: 181,430 km, power: 115 kW (156.36 HP), first registration: 04/2012, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel, number of seats: 3, total length: 6,360 mm, total width: 2,320 mm, total height: 2,350 mm, permissible axle load (axle 1): 2,900 kg, permissible axle load (axle 2): 5,600 kg, loading space length: 3,280 mm, loading space width: 2,200 mm, Year of construction: 2012, Equipment: crane, Crane Crane length: 6,20 m Number of hydraulic extensions: 1 Number of manual extensions: 1 Number of support legs: 2 Meter capacity: 4,5 m Capacity kilo: 1.82 kg Superstructure Construction year: 2012 Bljdpezwnqijfx Ahmon = More information = General information Number of doors: 2 Cab: single Registration number: BD-135-N Technical information Number of cylinders: 4 Engine capacity: 4.249 cc Drivetrain Make of engine: Mercedes-Benz Axle configuration Brakes: disc brakes Suspension: leaf suspension Front axle: Max. axle load: 2900 kg; Steering; Tyre profile left: 60%; Tyre profile right: 60% Rear axle: Double wheels; Max. axle load: 5600 kg; Tyre profile left inner: 60%; Tyre profile left outer: 60%; Tyre profile right outer: 60%; Tyre profile right outer: 60% Weights Empty weight: 4.878 kg Carrying capacity: 2.612 kg GVW: 7.490 kg Max. towing weight: 12.490 kg Functional Crane: MKG HLK 45, year of manufacture 1994, behind the cab Make of bodywork: Meiller Height of cargo floor: 120 cm Maintenance, history and condition APK (MOT): tested until 06/2027 Technical condition: very good Visual appearance: very good = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, Year of construction: 2007, Technical details: swing diameter: 400 mm Blsdjzzvx Aepfx Ahmjn turning height: 950-1500 mm Turning length: 210 mm x-travel: 310 mm z-travel: 350 mm spindle turning speed range: 20-3500 U/min weight of the machine ca.: 11 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m

Condition: used, Year of construction: 2007, Technical details: swing diameter: 400 mm Bsdjzzvxvopfx Ahmjln turning height: 950-1500 mm Turning length: 210 mm x-travel: 310 mm z-travel: 350 mm spindle turning speed range: 20-3500 U/min weight of the machine ca.: 11 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Equipment: CE marking, IMA BIMA 410 V CNC WORKING CENTRE FOR BORING + ROUTING + EDGE BANDING • Industrial machine with heavy-duty structure • Working area: X:4000 mm Y:1200 mm Z: 100 mm • Travel speed: X:100 m/min Y:80 m/min Z: 25 m/min • 2 Working areas • 8 movable work tables to support the panels. SCHMALZ system • 23 SCHMALZ suction cups with vacuum system for the locking of the working piece • 4 loading device through pneumatic bars assembled on the work tables that lift the pieces • 1 SIEMENS vacuum pump ROUTING UNIT: • 10 HP. Refrigerated router head • Automatic change of the tool • Tool holders: HSK F-63 • C AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control • 0 to 20.000 rpm • Tool magazine 12 positions MULTI-BORING UNIT: • 7 independent spindles for vertical boring in X direction • 5 independent spindles for vertical boring in Y direction • High revolution speed: 9.000 rpm EDGE BANDING UNIT: • Automatic device to apply the edge into straight profiles of shaped panels • Applicable banding material in coils: thin edge and PVC up to 3 mm • Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot and premelter - spreading roller to regulate the quantity of apllied glue - edge pression roller • Lamp zone to pre-heat the side of the panel • Multiple magazine for edge coils with 2 positions, to automatically change the edge type • Top and bottom edge trimming head-unit • Top and bottom edge scraping head-unit CONTROL OF THE MACHINE: • IMATRONIC • Software IMAWOP • Command board installed on a separated electrical cabinet to control the machine Bjdpfx Ahezc E A Ijmeln PROTECTION ENCLOSURE OF THE WORKING UNITS PROTECTION FENCES SECURITY CARPETS SECURITY NORME CE MARK

Condition: used, Surface Grinding Machine ERNAULT SOMUA FU 660 Travel X: 660 mm Travel Y: 400 mm Travel Z: 400 mm Magnetic chuck BRAILLON 700 x 300 mm Grinding wheel: Ø 355 mm Motor power: 7,5 CV Swivel head Automatic diamond cutting Auto stepover X - Y - Z Lubricant tank Hydraulic Group Voltage: 220 V Tri Blsdpfx Aozwxf Rshmsn Length: 2900 mm Depth: 2000 mm Total height: 2200 mm Weight: approx 4,5 T

Condition: used, Year of construction: 2005, functionality: fully functional, conveyor belt length: 4,560 mm, conveyor belt width: 800 mm, conveyor belt speed: 370 mm/s, total length: 4,560 mm, total width: 917 mm, total height: 270 mm, power: 0.37 kW (0.50 HP), motor manufacturer: Brown Pestell, TAF item number: 1000004836 Manufacturer: FRASCH Year of manufacture: 2005 Overall dimensions (LxWxH): 4,560 x 917 x 270 Width including side plate in mm: 875 Width incl. drive in mm: 917 Side height in mm: 80 Conveyor length in mm: 4,560 Conveyor width in mm: 800 Belt type: PVC, smooth Belt width in mm: 800 Bsdpfx Ahewk H Amsmjln Sliding surface: Sheet metal Drive: Head drive Motor type: Gear motor Motor data: Brown Pestell, 0.37 KW, 50 Hz, 220-380 / 240-415V Conveyor speed in m/s: 0.37 Net weight in kg: 157 Condition: Used / fully functional Function test: OK

Condition: used, Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth: 2500 mm Total height: 2600 mm Weight: 4,5 T Blsdpfxezzwa Ie Ahmon