Used Acmi Rasar P180 for sale (77)

Condition: new, machine/vehicle number: 1eb6bdba4d54d87ab018b84c2, empty load weight: 3 kg, maximum load weight: 14 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 445/45 r19,5, Further information Chassis Wechel central axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 1 pair of gear support legs at the front, with straight lower section and single-sided operation in FR right 2 wheel chocks with holder Aluminum side bumpers Steel underride guard Half-shell mudguard Spray flaps Csdoi Ri Itopfx Ad Njrb Towing device central axle trailer Towbar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or exact testing still required in the event of an order) Without length adjustment of drawbar Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Air supply 208 liters Spring-applied parking brake Duomatic connection at the front, with connection line to the motor vehicle, connection in FR-left EBS, electronic braking system with EBS plug at the front, with connecting cable, connection in FR right-hand side Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in both lowering / lifting position Wheels and tires 445/45 R19.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, connection in FR right-hand side LED work lights on both sides (switched via reversing light) LED worklights at the front, centered between the carriers, radiating to the rear, switched via reversing light Operating instructions Special approval required if the overall length of the train exceeds 18,750 mm. Observe country-specific approval regulations. Country of approval / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Attention: Archive pictures!

Condition: new, machine/vehicle number: 207ad28f83705ed0d38a4f174, empty load weight: 3 kg, maximum load weight: 11 kg, overall weight: 14 kg, axle configuration: 2 axles, tire size: 235/75 r17,5, Further information Chassis Wechel central axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 flush with rear (for 7.15 swap bodies not flush with rear, forklift pockets/frame protrude) Telescopic front support leg 1 pair of front gear support legs, with straight lower section and single-sided operation in FR right Wheel chocks with holder Aluminum side bumpers Steel underride guard Half-shell mudguards Bracket for truck-mounted forklift at the rear, including 2 fork pockets, 2 extendable support tubes, bracket for chain safety device with pin. Underride guard with light unit can be folded away. Including 2 loose rubbers to protect the rear wall, we recommend counterweight! Partially low ground clearance with forklift, poor tracking behavior possible, without warranty! (Forklift tare weight up to max. 1500 kg for trailers). (With proximity switch for forklift control in conjunction with lift axle)The axles are shifted to the rear by the forklift bracket, observe load distribution when driving without forklift. Customer risk! (For swap body trailers, driving with a forklift is only permitted in conjunction with a swap body) Forklift bracket as AU 203670 adapted to 7.45 m swap bodies Counterweight at the front between the frames, approx. 300 kg, if necessary, exact check still required Towing device central axle trailer Tow bar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or exact testing still required if ordered) Lower coupler drawbar without length adjustment drawbar Axles + suspension Crodpfxji Ri Iao Ad Njb SAF drum brake axles of the manufacturer's choice Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Spring-applied parking brake Duomatic connection at the front, with connection line to the engine trolley, in FR-left Duomatic connection at the front, with connection line to the motor vehicle, connection in FR-right EBS, electronic brake system with EBS plug at the front, with connecting cable, in FR-left Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in each case in lowering / lifting position Vehicle - driving stability system Wheels and tires 235/75 R17.5 tires of the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volt, 4 x 3 chamber lights + 1 round reversing light and + 1 round rear fog light, amber LED lighting on the side, lights mounted in a protected position! 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin plug at the front, with connecting cable, in FR-left 2 x 7-pin sockets in FR left rear for truck-mounted forklift 1 x 15-pin socket in FR left rear for truck-mounted forklift LED work lights on both sides behind the 2nd axle (switched via reversing light) Additional LED work light(s) at the rear, switched via reversing light Approval / plates Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame

Condition: new, machine/vehicle number: 06017a31026c05fc8f6ccf5ae, empty load weight: 3,055 kg, maximum load weight: 14,945 kg, overall weight: 18,000 kg, axle configuration: 2 axles, tire size: 235/75 r17,5, Further information Chassis Changing turntable Codpfxoi Ri Rce Ad Norb Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 Turntable with sturdy ball bearing slewing ring 2 wheel chocks with holder Aluminum side bumper Steel underride guard Quarter-shell mudguards at the front and half-shell mudguards at the rear Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the motor vehicle, EBS, electronic braking system with EBS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in both lowering and lifting position Wheels and tires 235/75 R17.5 tires of the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volt, multi-chamber lights in LED with resistor, amber LED lighting at the side, license plate lighting in LED, (Note! with certain towing vehicles, misdiagnosis may occur although the function is given) 2 white front position lights in LED 2 white/red rear lane departure lights in LED 1 x 15-pin plug at the front, with connecting cable, Additional LED work light(s) at the rear, switched via reversing light Approval / plates Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Attention: Archive pictures!

Condition: new, machine/vehicle number: e8628b18bda6db44719c946e0, overall weight: 18,000 kg, axle configuration: 2 axles, tire size: 385/65 r22.5, Further information Chassis Changing turntable Fine-grained steel welded construction Fliegl V-Stream frame Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 Turntable with strong ball bearing slewing ring 2 wheel chocks with holder Aluminum side bumper Side collision protection set inwards, for optimum clearance to the swap body supports Credpfji Rivlex Ad Neb Steel underride guard Underride guard shortened for optimum clearance to the swap body supports, lighting system mounted protected Half-shell mudguards Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Drawbar height adjustment via spring Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Air supply 208 liters Spring-loaded parking brake 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in both lowering and lifting position Wheels and tires 385/65 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, 2 additional LED work lights at the rear, switched via reversing light 1 LED work light at the front, centered between the carriers, radiating to the rear, switched via reversing light Country of registration/ plates Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Please note! These are archive images!

Condition: new, machine/vehicle number: d7a33d709a92cd60f18d010e8, empty load weight: 3 kg, maximum load weight: 14 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 385/65 r22.5, Further information Chassis Wechel central axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 1 pair of front gear support legs, with straight lower section and single-sided operation in FR right 2 wheel chocks with holder Aluminum side impact guard Side collision protection set inwards, for optimum clearance to the swap body supports Steel underride guard Half-shell mudguards Spray flaps Towing device central axle trailer Drawbar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or precise testing still required in the event of an order) Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Air supply 208 liters Spring-loaded parking brake 2 swap-proof coupling heads at the front, with connecting lines to the engine trolley, connection in FR right-hand side EBS, electronic brake system with EBS plug at the front, with connecting cable, connection in FR right-hand side Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in both lowering / lifting position Wheels and tires 385/65 R22.5 Athos brand Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin plug at the front, with connecting cable, connection in FR right-hand side 2 additional LED work lights, integrated at the rear, switched via reversing light 1 LED work light at the front, centered between the carriers, radiating to the rear, switched via reversing light Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Cjdpfoi Riwbsx Ad Norb Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Attention: Archive pictures!

Condition: new, machine/vehicle number: 81b04fd2e28f354df79a4c3b3, empty load weight: 3 kg, maximum load weight: 14 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 235/75 r17,5``, Further information Chassis Wechel central axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear Folding locking adapter + height adjustment for parking height 1,000 - 1,120 mm, center supports can be folded and guide rollers can be pushed upwards, 4 container locking devices with sturdy outriggers on 20-basefor swap bodies 7.15 / 7.45 and 7.82 1 pair of gear support legs at the front, with straight lower section and single-sided operation in FR right 2 wheel chocks with holder Aluminum side bumpers Steel underride guard Half-shell mudguards Towing device central axle trailer Towbar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or exact testing still required in case of order) Under-coupler drawbar, free drawbar length approx. 2200 mm Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the engine trolley, connection in FR-right EBS, electronic brake system with EBS plug at the front, with connecting cable, connection in FR right-hand side Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in each case in lowering / lifting position Vehicle - driving stability system Wheels and tires 235/75 R17.5`` tires of the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 15-pin plug at the front, with connecting cable, connection in FR right-hand side 2 additional LED work lights at the rear, switched via reversing light 1 LED work light at the front, centered between the carriers, radiating to the rear, switched via reversing light Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) Crodpfx Adji Riy Nj Njb 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE - 70 Contour markings with reflective strips to ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Attention: Archive pictures!

Condition: new, machine/vehicle number: ccd5fddabaca94f260d9fe895, empty load weight: 2,950 kg, maximum load weight: 15,050 kg, overall weight: 18,000 kg, axle configuration: 2 axles, tire size: 445/45 r19,5, Further information Chassis Changing turntable Fine-grained steel welded construction Fliegl V-Stream frame Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 Turntable with strong ball bearing slewing ring 2 wheel chocks with holder Aluminum side bumper Side collision protection set inwards, for optimum clearance to the swap body supports Steel underride guard Cjdpfx Aji Ri Rkod Nerb Underride guard shortened for optimum clearance to the swap body supports, lighting system mounted protected Quarter-shell mudguards at the front and half-shell mudguards at the rear Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system Colored line routing for easy service. Air supply 208 liters Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the motor vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in both lowering and lifting position Wheels and tires 445/45 R19.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, 2 additional LED work lights at the rear, switched via reversing light 1 LED work light at the front, centered between the carriers, radiating to the rear, switched via reversing light Country of registration / plates Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Attention: Archive pictures!

Condition: used, Power supply unit, DIN rail Crjdjb N E Hlspfx Ad Nsb -Type: TSP 180-148 -Weight: 0.7 kg

Condition: used, Power supply unit, DIN rail Cedob N E Hmopfx Ad Norb -Type: TSP 180-124 -Weight: 0.7 kg

Condition: good (used), Sales counter, counter, stainless steel, cabinet, work table Credpfxob Uhnij Ad Neb -Drawers: 2 -Table dimensions: 700/1600/H830 mm -Roof dimensions: 1800/1670/H2330 mm -Design: stable -Transport dimensions: 2060/730/H870 mm -Weight: 120 kg

Condition: good (used), Aluminum table, aluminum work table -Design: stable Crjdpfxsb A I N Ne Ad Njb -Base floor: 1 -Plastic sheets -filing -Dimensions: 1800/700/H820 mm -Weight: 60 kg

Condition: new, WEG W22 Premium 22 KW02P180M -380 - 415/660//440-460 V 50 Hz 3-phase electric motor, unused in original packaging, 100% functional. Scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Crodpox Dwibofx Ad Neb

Condition: used, Diosna SP 180 spiral mixer 180 kg dough Cedpfx Adetqpp He Njrb suitable for all types of dough, thanks to the gentle kneading mobile with permanently installed bowl short kneading time due to large kneading area easy to use smooth surfaces, easy to clean large power reserves, convincing quality assurance capacity in flour 112kg bowl contents 280 liter

Year of construction: 2026, condition: new, Modern and an outstanding performer, the semi-manual filling machine is perfect for the small and medium-sized production of BIB-type vacuum bags from 2 to 20 liters and Pouches from 1.5 to 3 liters. Manual work needs only for put in and take out the bags. After the filling head placed right to the bag, it sucks vacuum and does the filling. When the filling is finished, the machine allows to use nitrogen gas injection in the bag. With this filling method, the user can maximize the shelf life of the end product Very easy to clean. It requires minimal maintenance. Specifications: - Performance: 180x3L BiB /h - Electric demands: 0,1 kW, 230 V - Filling temperature: up to 95°C - Filling volume: 1,5-20 L - Filling accuracy: +-1% - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: D: 760 mm x H: 620 mm x W: 580 mm - Weight: 30 kg Cjdpfx Adeff Aixs Njrb - Compressed air needs: max 250 L/h - Compressed air pressure: 6-6,5 bar - Nitrogen valve - Vacuum valve - Connections: DN25 or Garolla 40 - Needs an input stream of 2 bars - For Vitop© taps - CIP cleaning system - Only for low-density materials (fluids) - compact filling machine - efficient and very easy to use

Condition: used, mileage: 299,900 km, power: 324 kW (440.52 HP), gearing type: mechanical, fuel type: diesel, color: yellow, overall weight: 40,000 kg, empty load weight: 13,500 kg, maximum load weight: 26,500 kg, tire size: 315/80R22,5, axle configuration: 8x4, number of seats: 2, first registration: 06/2013, next inspection (TÜV): 03/2023, emission class: euro5, brakes: engine braking, suspension: steel-air, loading space volume: 10 m³, driver cabin: day cab, wheelbase: 3,600 mm, Equipment: ABS, additional headlights, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, hydraulics, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Mtlg. Haus, 1x air seat, seat heating, rear window, electric mirror, heated mirror, electric window left, electric window right, sun visor, cruise control, switch 16, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, raised exhaust, differential lock, fog lights, rotating beacon, leaf air suspension, aluminum tank, low noise G1, roof hatch, green environmental sticker Wheelbase: 3600 mm Structure: complete train with STETTER AM10FHAC concrete mixer trailer approx. 10m³ MAN HydroDrive, gearbox ZF 16 S 222 OD, MAN BrakeMatic, M-driver's cab. The offer is for the complete train, consisting of the tractor unit 85629 and the trailer 85636! Crodpevy A I Ssfx Ad Neb Mileage: 303725! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! - .

Condition: used, machine/vehicle number: 163, empty load weight: 4,050 kg, maximum load weight: 13,950 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/1999, loading space length: 8,200 mm, loading space width: 2,460 mm, loading space height: 3,020 mm, loading space volume: 61 m³, suspension: air, tire size: 235/75 r17,5, wheelbase: 1,310 mm, color: white, Equipment: ABS, * Drum brake * SAF axles * Loading through facility * Lifting and lowering device Cedpemhhz Hofx Ad Nerb Errors excepted

Condition: used, empty load weight: 3,300 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2015, loading space length: 7,100 mm, loading space width: 2,490 mm, loading space height: 950 mm, loading space volume: 17 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 5,800 mm, color: orange, Equipment: ABS, Disc brake EBS Payload 14,700 kg DC axles Extendable drawbar Crodpfx Adjuv Hrqj Njb Errors excepted

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, rotational speed (min.): 2,947 rpm, input voltage: 690 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, Product Description: ABB M3HP 180MLB (2019) ⚙️ Device Type: Three-phase, low-voltage squirrel cage induction motor, ABB M3HP series – designed for industrial applications requiring high reliability, energy efficiency, and long service life. 🔍 Construction and Features: - Model: M3HP 180MLB - Housing: High-strength cast iron, mechanically durable and corrosion resistant - Cooling: IC411 (external self-powered axial fan, integrated under protective cover) - Protection rating: IP55 – protection against dust and water jets from any direction - Mounting configuration: B3 – foot-mounted (other variants, e.g., B5, available within the same motor family) - Bearings: High-quality ball bearings, suitable for continuous operation - Lubrication: Relubrication possible (grease nipples on housing available in many versions) ⚡ Electrical Specifications: Parameter Typical Value (for 4-pole version) Rated power 22 kW Supply voltage 400 / 690 V (Y/Δ) Frequency 50 Hz (optionally 60 Hz in alternative configuration) Number of poles 4 (approx. 1500 rpm at 50 Hz) Rated current approx. 40–42 A at 400 V (exact value per nameplate) Efficiency class IE2 or IE3 (depending on factory version) Insulation class F (winding temperatures up to 155°C permitted), utilizing class B 📏 Mechanical Dimensions: Parameter Value (typical IEC data) Shaft height 180 mm Shaft diameter 48 mm Shaft length 110 mm Mounting holes spacing (feet) 279 x 279 mm Overall length approx. 580 mm (incl. fan and cover) Weight approx. 180–210 kg (depending on execution) ⚠️ Dimensions may vary slightly depending on the version – for details refer to ABB documentation (IEC 60072-1 compliant). 🏭 Application: The ABB M3HP 180MLB motor is widely used in industry, particularly in: - Pump stations and hydraulic systems (centrifugal, deep-well, and circulation pumps) - Fans, blowers, HVAC systems - Belt conveyors, production lines - Mixers, mills, for both intermittent and continuous duty - Specialized machinery in food, wood, and chemical industries ✅ Key Advantages of the M3HP 180MLB: - High reliability – proven ABB design, robust cast iron housing, resistant to harsh environments - Energy efficiency – compliant with IE2 or IE3 standards (lower power consumption) Cedpew Ifb Uofx Ad Nerb - Easy integration – IEC standard compliance, universal dimensions, wide range of accessories - Customizable – options with PTC sensors, encoders, brake, various mounting configurations - Long service life – relubrication capability, premium grade bearings - Quiet operation – low noise level, meets environmental standards 📦 Condition and Storage: - Year of manufacture: 2019 - Factory-new, unused motor, stored under controlled conditions (dry, vibration-free, in accordance with ABB guidelines) Price is per unit – 2 units available. Immediate delivery.

Condition: like new (used), 11 upper hydraulic clamps 5 front pneumatic clamps Possibility to deactivate individual cylinders Maximum working height: 124 cm Clamp width: 16 cm Maximum working length: 13 m Machine length: 15 m Machine width: 110 cm Machine height: 270 cm Pump power: 3 kW Stepless adjustment of clamping force Csdpfx Aoxrtl Ued Nsrb Weight: 5000 kg

Condition: new, Year of construction: 2025, Grid / Mesh Welding Machine Type KMP180 Credpfxjuy U Hwo Ad Njb CE certified Operated: Pneumatic Pressure: 4-8 bar Power: 180KVA Welding Capacity(mesh/grid): (4+4mm mild steel) 4 wire same time Water-cooled Transformer Construction: Primary winding: Copper wire Secondary winding: Copper bar Core: Silicon steel EI core Epoxy resin coated transformer Maximum Force: 305-610 daN Input Voltage: 380V/50Hz Protection Fuse: 300A Power Level: %0-99 power adjustable by digital microcontroller Weld Time: 1-99 Cycle (20ms - 2s) adjustable by digital microcontroller Arm Length: 550mm Cooling: Water cooling (30L/min) Power Input Cable: 3m Protection Class: IP21 Dimensions (W/L/H): 4500m x3500mm x 2150mm Weight: 2850Kg

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: E1334, Kitagawa rotary table RS160RAH01, serial no. E 1334 - year of manufacture 11/2001, incl. MACminiEH controller, serial no. H980960364 - year of manufacture 11/2000. Csdpfeyn Nvijx Ad Nsrb

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Electrical specs: 400 V / 50 Hz Control systems: ABB, Siemens Operating direction: Standard Scope of Delivery  Blow moulder: SIG Corpoplast Blomax 24, year 2008 24 stations, heating oven with 20 boxes, ABB control Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK Air conveyor: NTS Mistral, year 2000 Pneumatic adjustable rails, basket cable tray Filler: KHS Innofill EV-VF, year 2000 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version Inspection & Coding: Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 Bottle laser coding: Videojet with housing Pack inspection: KHS Innocheck CUB, year 2015 Packing machine: Kisters SP060V, year 2000 Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only Conveyors & Pack labelling: Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication Pack conveyor: Paxona + Schaefer, year 2009 Pack labelling: Contact 100, self-adhesive label from reel Cedpswh U Avefx Ad Nerb

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0488, KEBER Palletizer & Wrapping machine Codpfxstgmwre Ad Njrb [Year : 1997 sn : 0488 Model :101 ] ~ 1700 packets / h Wrapper [Year : 1997 sn : 0487 Model :MEC ARM] Machines are operation. ALSO FOR SALE : Palletiser - ACMI - RASAR P135 H - €49,000 2000 Year ACMI s.r.l Palletiser with wrapper used for 5000ml PET bottles & EUR pallets C-1581 Serial No

Condition: used, operating hours: 24,000 h, Used Bottling Line for Sale Bertolaso 7000 BPH – 1999 for still and sparkling wine. Credpfxovguu Ds Ad Neb The bottling Line for Sale as a whole, considering every component, is very well maintained. Clean and without obvious or compromising signs of wear. The sparkling wine bottling line reaches an hourly speed of about 3000 BPH on the 0.75 formats. Depalletizer: The line starts with the Acmi automatic depalletizer model Rasar P130; with an electric roller pallet storage that manages the pallets automatically with two pallets waiting. The maximum height of the workable pallet can reach about 2 meters. The standard pallet size is 800 × 1200 with a height of 140 cm. Automatic inter-layer remover with compressed air rotating arm. It has a parachute safety system that prevents the head from going down in case there is an operator. It is also equipped with a perimeter barrier that blocks the machine in case the doors are opened. Filling Isobaric Monoblock of Bertolaso Bottling Line for Sale: The Bertolaso ​​Sincronia 1400 filling monoblock starts with a 28-valve internal bottle rinsing machine followed by an isobaric filler with 36 taps and ends with a 6-head mushroom cork corker, or a 4-head screw cap. It has a machine pitch of about 30 cm to allow the processing of multiple formats of different sizes. The direction is clockwise. Safeguards are all present as also machine manuals. This line’s bottled product is wine and sparkling wine in sizes from 0.375 to 1.5 L.  It performs isobaric filling with mobile nozzles and traditional valves. It generates a vacuum before capping. The type of cap used is cork (straight or mushroom) or silicone with 6 heads; while aluminium and Stelvin caps with 4 heads. The size of the corker ranges from a minimum of 44 × 23.5 to 48 × 30.5 mm. Inspector: It is a 2011 model that is able to check the level and the cap, the internal product and any residues inside the empty bottle. Fully electronic with laser sensors, it can work at a speed of 7000 BPH and over. Washer-dryer: It’s a Cames from 2000 with a spray washing system that rinses the bottle externally, brushes it and then passes it under the hot air hair dryers that immediately dry the bottle preparing the surface for labelling.  Wirehooder and Capsule: Next in line is a Spumante Wirehooder of the brand Nortan Minerva 60, an accumulation space for the bottles followed by a Nortan capper. It is also suitable for sparkling wines with centring, with a maximum height of the processed bottle ranging from 15 to 35 cm. Overall mass 3000 kg; Consumption: 380 v, 15 kW, 50 Hz Labelling machine: Bertolaso Bottling Line for Sale has a Krones labeller from the year 2000 with a bottle lock at the entrance. It has 8 plates with a machine pitch of about 30 cm. It has a manual head and glue film adjustment, mechanical centring system and outgoing label smoothing.

Condition: used, machine/vehicle number: LC594, Technical Specifications & Performance Data This complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations. Csdjydn A Hjpfx Ad Njrb Production speed: 13,000–14,000 bottles per hour Containers: PET bottles, neck finish 28 1881 Blow molder: Sidel SBO10, 10 cavities Preform handling: Sidel EBH 2050 preform hopper Air conveyor: Sidel-Alsim Rinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10K Rinser: 48 clamps, 1 water treatment Filler: 60 isobaric valves Capper: 10 heads Premix/Mixer: Sidel-Alsim, 30 m³/h output Bottle dryer: ACI Labeling machine: Krones Contiroll, rotary, 15 dishes, PET wrap-around, roll-fed Shrink wrapper: Acmi Fenix, film-only configuration Handle applicator: Smipack HA 35-50-70 Palletizer: Alsim Valiant 1I 1P, fully automatic, push-type Pallet wrapper: PM Pragometal OBS Rotomatic Standard Advanced Automation & Control Systems The line integrates component HMIs and automatic control features at each station to streamline operation and changeovers. The isobaric filling block ensures precise filling for carbonated beverages, while the roll-fed rotary labeling system supports continuous, high-speed label application. Quick-change mechanical adjustments and format components help maintain uptime and reduce setup times in beverage production environments. Production Line Integration Capabilities Designed for inline operation from preform loading through palletizing, the system features smooth bottle transfer via air conveyors and synchronized starwheels in the filling monoblock. It integrates upstream blowing with downstream labeling, shrink wrapping, handle application, and palletizing, creating a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks and supports multiple PET bottle formats and heights associated with the 28 1881 neck finish. Machine Condition & Maintenance History This second hand line is available for sale and is presented in ready-for-operation condition. Component years range from 1996 to 2019, reflecting a well-curated selection of bottling equipment. Buyers can arrange inspection to assess performance, equipment condition, and overall line integration prior to deployment in beverage production. Operational Performance & Versatility Optimized for carbonated products, the isobaric filler provides accurate CO₂ retention and foam control. The Sidel blow molder delivers stable bottle quality, while the Krones Contiroll rotary labeler ensures precise PET wrap-around label application at the stated throughput. Downstream packaging includes film-only shrink wrapping and automated handle application for multipacks, with automated palletizing and pallet wra...