Used Actuator for sale (527)

Condition: new, For sale: EMG-DREHMO DR 39 B-40 electric valve actuator. The device comes from warehouse stock – condition: new, unused. Actuator designed for automatic valve control in industrial installations (water, gas, process technology, power engineering). Technical data • Manufacturer: EMG-DREHMO • Model: DR 39 B-40 • Year of manufacture: 2005 • Torque: 40 Nm • Power supply: 380–420 V / 50 Hz • Motor power: 0.40 kW • Speed: approx. 30–40 rpm • Protection class: IP67 Condition Device is brand new – warehouse condition. Visible transport marks: slightly bent handwheel, small crack in housing by the gearbox (visible in photos). Not tested under voltage – sold as warehouse device / to be checked before installation. Scope of delivery • EMG-DREHMO valve actuator • Handwheel for manual operation Visual condition as per photos. Nsdpjyutpgsfx Abzswi

Condition: used, functionality: fully functional, Festo DGC-32-3600-KF-PPV-A Linear actuator. Two units in stock, price is for one pc only. Good working condition. Please check out our other listings as well. Nwodpfxotwqt Is Abzsi

Condition: used, functionality: fully functional, FESTO DGPL-40-1250-PPV-A-B-KF-GH-SH Linear actuator. Good working condition. Nwjdpfstwqrwjx Abzsi Please check out our other listings as well.

Condition: like new (used), functionality: fully functional, FESTO DGPL-32-2180-PPV-A-B-KF-SH LINEAR ACTUATOR Pressure: 2…8 bar. Good working condition. Please check out our other listings as well. Nwedpfstwqtbox Abzei

Condition: like new (used), functionality: fully functional, FESTO DGPL-32-700-PPV-A-KF-B; 161793 Linear actuator. Nwodpeturw Nsfx Abzoi Good working condition. Please check out our other listings as well.

Condition: as good as new (ex-display), Tuflin sampling cock, DN 80, with pneumatic actuator and electric switching module Manufacturer: Xomox Nominal size: DN 80 Material: 1.4408 (V4A) Pneumatic actuator: Nodpfx Abefuwrgjzswi Part No.: 716112 C Article No.: XD130S10A-F12 Year of manufacture: 2009 Pmax (psi): 10/145 QSP: 10 In very good condition! Tuflin sampling cocks, some unused, therefore in new condition!

Year of construction: 2009, condition: like new (used), Tuflin chick valve, DN 80, with pneumatic actuator and electric switching module Manufacturer: Xomox Nominal size: DN 80 Material: 1.4408 (V4A) Pneumatic actuator: Nwedpfx Asd Rww Isbzsi Part No.: 716301-5 Article No.: XRP-RO53800148KXD40 Year of manufacture: 2009 Pmax (psi): 5/70 QSP: 8 In very good condition! Tuflin chick valves, some unused, therefore in new condition!

Condition: excellent (used), 1,5 Nm, 1,8 A , 360 V , 3.000rpm , IP 21 Nodpfslqxbpex Abzswi

Year of construction: 1996, condition: good (used), Auma actuators Please inquire about the required size individually! Nwsdpjfdl Szofx Abzsi Condition: very good and ready for use. Voltage: 400V Output: A and B1-B4 Valve connection: F07; F10; F14; F16; G0; Output speed: 0.52 - 125 RPM Motor power: 0.025 - 5.5 kW Also available: gearboxes such as GST.

Condition: used, functionality: unexamined, machine/vehicle number: SAF 30NC, Used AMG-PESCH SAF 30NC pneumatic actuator with valve Manufacturer: AMG-PESCH GmbH Model: SAF 30NC With Festo vsnc-fc-m52-md-n14-f8 “solenoid valve” For sale per set Nwsdpfxsxp H Eve Abzji

Year of construction: 2024, condition: new, functionality: fully functional, Important lot of 59 fully equipped NEW automated valves still in crates. Brand: VALMET NELES Nsdpfx Abjw Am Itszswi

Condition: new, functionality: fully functional, Hoerbiger Origa OSP-P40-02000-00370 Linear actuator. Nsdjtvz I Depfx Abzewi Good working condition. Please check out our other listings as well.

Condition: new, ATP-1000 tester can be successfully used in companies engaged in turbocharger repair, as well as in car repair services offering a wide range of repair works to determine the cause of turbocharger malfunction. It is also suitable for companies supplying electronic actuators. The tester checks the functionality of the actuator as a whole and its individual elements such as the position sensor and servomotor. Separate diagnostics of each element allows you to accurately determine the condition of the turbocharger actuator and detect a problem, if one exists. The ATP-1000 is easy to use and allows you to quickly check the condition of the actuator and its components. This has made it an effective tool for monitoring the functionality of actuators. HIGHLIGHTS Testing of electronic actuators for turbochargers Programming (adaptation) of SIEMENS electronic actuators Testing of 12V DC motors up to 2A Testing of boost solenoids used in pneumatic systems Testing of electronic and pneumatic actuator position sensors Works with all common types of actuators and similar in principle of operation. Communication protocols: PWM, CAN, ADC, SENT. KEY FEATURES • Protection of the device by current 2A for 3 seconds Nwodpfen E S T Usx Abzji • Automatic detection of DC motor polarity inside the actuator • Tooltip for color-coding the cable to the selected actuator type • Display position sensor readings as a percentage • Display of additional parameters of HELLA programmable actuators: firmware number, programmed angle value • Portable version for testing directly on the vehicle • USB control of actuators, when working together with the software of GEOMET-2000 turbo flowbenches. • Regular updating of the tester firmware СABLES Set of diagnostic cables for actuators 12 pcs. Set of diagnostic cables for position sensors 6 pcs. Cable set for uncommon turbines 11 pcs. USB cable 1 pc. Cable AC/DC 12V, 4A power supply 1 pc. !!!! If you are looking for an electronic actuator programmer, ask me.

Condition: new, functionality: fully functional, Year of construction: 2020, machine/vehicle number: KST-02N-DC24V, Bulk lot of electric valve actuators – Kangsaite Automation KST-02N. Nodpfx Absx N A Nyezjwi • Quantity available: 50+ units • Type: Electric quarter-turn valve actuator (on/off) • Voltage: 24V DC • Rated torque: 20 Nm • Protection: IP67 • Mounting standard: ISO5211 F03 / F04 / F05 • Rotation: 90° • Application: Ball valves / butterfly valves • Condition: New old stock (unused, never installed) Suitable for industrial automation, food & beverage, water systems, HVAC, and process control. Sold as actuators only (no valves included). Location: Rehovot, Israel EXW Bulk pricing available. Discounts for larger quantities (10+, 25+, 50+ units).

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, We offer these ready-to-use AUMA actuators and JC Spain gate valves, 10" to 42" gate valves with actuators, model "Valves for Oil Industry," year of manufacture 2016. High-performance gate valves Sizes: 10" to 42" Pressure class: 600 lbs, Stellite 6 hardfacing and 13% Cr trim (internal parts) BWE (butt-weld ends), wedge type gate valve, bolted bonnet, OS&Y ASTM A-216 WCB (cast carbon steel) Nedpfx Abey D Iliozswi The majority of units are equipped with explosion-proof, intelligent AUMA AUMATIC ExC actuators. Optionally, we can refurbish the actuators and gate valves and provide a factory acceptance test (FAT). Actuator manufacturer: AUMA Riester GmbH & Co. KG Model: 10" to 42" gate valves with actuator - 42" gate valves (2 units): equipped with AUMA SAEX 30.1 actuators. - 32" gate valve (1 unit): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. - 30" gate valves (4 units): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. - 30" gate valves (2 units): handwheel (can be fitted with actuators). - 16" gate valves (9 units): equipped with AUMA SAEX 14.6/GK30.2 Germany actuators (Ex-proof). - 10" gate valve (1 unit): handwheel Location: Ras al Khaimah, UAE If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 4,000 t, stroke length: 180 mm, throat depth: 500 mm, overall weight: 28,000 kg, controller model: Siemens S7-300, The machine underwent a major overhaul in 2007! The following modifications were carried out on the single-column eccentric press PEE 400: Conversion of the press drive to an adjustable drive with 15-45 strokes of the press ram Conversion of the clutch and brake to a pneumatically actuated Ortlinghaus clutch-brake combination Adjustment of the pinion shaft, flywheel, and bearing cover to the pneumatically actuated clutch-brake combinations Replacement of the rolling bearings for the pinion shaft and flywheel bearing Replacement of all sealing elements and wear parts for the drive Replacement of the seals for the compensator cylinder Replacement of the V-belts for the flywheel drive Replacement of the entire electrical control system Installation of a stroke adjustment mechanism Modification of the safety device Mounting of a tie rod to reduce frame deflection under press force Replacement of the worm gear for ram adjustment, pressure spindle, spindle nut, and pressure ring Refurbishment of the ram guide rails Replacement of the die plate and its support Hydraulics Pneumatics Lubrication Hydraulic pull-down cushion in the press table Tool mounting arms for attaching the press tool Tool lever strips in the table TECHNICAL DETAILS Pressing force: 4,000 kN Adjustable stroke: 30–180 mm Adjustable stroke rate per minute (continuous operation): 15–45 /min Ram adjustment: 150 mm Overhang: 500 mm Ram area (width × depth): 1,200 × 800 mm Table area (width × depth): 1,600 × 1,000 mm Maximum distance between table and ram area: 625 mm MACHINE DETAILS Control: Siemens S7-300 Motor power: 55 kW Motor speed: 1,500 rpm Hydraulic pull-down cushion Piston diameter: 110 mm Piston rod diameter: 90 mm Effective piston area: 95 cm² Pull-down cushion diameter: 230 mm Adjustable counterforce: 10–250 kN Usable pull-down cushion stroke: 90 mm Speed of the pull-down cushion during extension: max. 65 mm/s Nodpfxozmfnqs Abzjwi Hydraulic system Flow rate of the pull-down cushion pump: 29 l/min Drive power of the main pump: 7.5 kW Oil capacity in the tank: 250 l Flow rate of the circulation pump: 65 l/min Drive power of the circulation pump: 1.5 kW Operating pressure for clutch and brake: 5 bar Operating pressure for ram weight compensation: 5 bar Total machine weight: 28,000 kg

Condition: excellent (used), Astech / Mainali Automatic cutting line for Cubes, Sticks, Nuggets, Burgers and Planks A modular and versatile line. It automatically, continuously, and safely cuts frozen blocks into cubes, sticks, and planks of the desired size. It can be easily adapted to the floor space. 1. BLOCKS LOADING. The operator has to place the block of raw material in position on the conveyor belt at the start of the process. 2. AUTOMATIC BANDSAW WITH SERVOMOTOR. It performs the firts cut of the block in the form of plank. This equipment has the transport system of the product through the whole line, having the control of the whole installation, it works automatically and manages all the remaining processes. 3. MULTISPLITTER SAW. It performs the second cut with which sticks are obtained. This unit has no traction bands as the movement of the piece is determined by the automatic bandsaw and the whole system is sequential, depending on the cuts it is making. 4. DISC MACHINE. It has been specially designed to perform several cuts at the same time. The pieces of the automatic line arrive to the disc machine continuously throught a tunnel. An actuator moves the pusher system cutting the bars through the discs to obtain the final product. Nodpfx Ajzpw Rpjbzswi This line consist of the following 3 machines: Astech SRA1A Automatic Band Saw; Mainali Multisplitter; Mainali Multidisco; Astech SRA1A Automatic Band Saw Manufacturer: Astech Model: SRA1A Useful loading size: 1.000x650 mm Max. cutting height: 280 mm State of the product to be cut: Frozen Power: 7,8kW / 400V / 50Hz Air: 80L/min. / 6 bar Machin dimensions LxWxH: 1.900x2.705x2.050 mm Machine weight: 950 kg.

Condition: good (used), Year of construction: 2022, functionality: fully functional, overall weight: 125 kg, input voltage: 230 V, total length: 1,500 mm, total height: 1,000 mm, total width: 700 mm, Equipment: documentation/manual, Siemens S7 PLC training and testing system AP2, electronics technician for automation technology – conveyor system Manufacturer: Stepp Fabrikautomation GmbH & Co. KG Year of manufacture: 2022 Control system: Siemens S7 PLC Description: For sale is a complete, professionally manufactured training and testing system for training in the field of electronics/automation technology. The system was manufactured by Stepp Fabrikautomation GmbH & Co. KG as a special machine and is used for the practical execution of tasks for the final examination, part 2 (AP2), for electronics technicians for automation technology. The module enables the complete execution of an automation task, from electrical wiring to PLC programming, commissioning, and troubleshooting. Technical equipment: Siemens S7 PLC control system Complete control cabinet with industrial wiring Voltage supply and protection technology Input/output circuitry Control of a conveyor system Motor drive with power unit Sensors and actuators Operating and signaling elements Terminal and documentation system Areas of application: Training for electronics technicians for automation technology AP2 examination preparation Vocational schools and technical training centers In-house training and further education Nsdpozp Iqmofx Abzewi Advantages: Industrial design based on special machine construction Not a simple training system, but a practice-oriented machine design Realistic simulation of an automation task Ready for immediate use Ideal for training apprentices Condition: Very good condition, year of manufacture 2022, fully functional. Scope of delivery: Complete testing/training module Control cabinet Conveyor system PLC control system Existing documentation

Condition: used, mileage: 299,806 km, power: 103 kW (140.04 HP), first registration: 02/2018, fuel type: diesel, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro6, number of seats: 5, Year of construction: 2017, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, VW Crafter 2.0 TDI, medium wheelbase, with 5 seats, featuring: air conditioning, navigation, auxiliary heater with remote control, electric windows, tilting window in the second row of seats. - Special features: Second battery with battery monitoring; driver and passenger airbags; passenger airbag can be deactivated; Discover Media audio navigation system (touchscreen color display); electrically adjustable and heated exterior mirrors; driver assistance systems: front and rear parking sensors; chassis: reinforced suspension and shocks; sliding windows in cargo/passenger compartment: front left and right; vehicle without cargo partition; Climatic air conditioning (driver’s cab) with second evaporator; side marker lights; smoker's package; spare wheel in matching tire configuration including on-board tools and jack; rear door hinges with increased opening angle; comfort seats for driver and front passenger; auxiliary heater with remote control; 4 x 12V power sockets in the cab; rear entry step integrated in bumper; half-height plastic cladding in the cargo/passenger compartment. Additional equipment: Convex exterior mirrors left and right; LED indicators integrated into exterior mirrors; rubber floor covering in cab; aerodynamic underbody paneling; dual headlights; twin-tone horn; grab handle on rear left and right roof pillars; hill start assist; brake assist system (HBA); crosswind assist; front electric window lifters; laminated safety glass windscreen; grab handles on A-pillars; rear wing doors without windows; LED interior lights in cab and cargo/passenger compartment; body type: standard panel van; roof type: standard roof; 75-litre fuel tank; front radiator grille with upper chrome trim; steering column (steering wheel) adjustable; headlight beam adjustment; N1 homologation (commercial vehicle registration); engine: 2.0 L - 103 kW TDI; rear fog light; wheelbase: 3640 mm; tire repair kit; low-emission as per Euro 6 emissions standard; right-side sliding door in cargo/passenger compartment; SCR system (AdBlue technology); electro-mechanical power steering; seat upholstery: fabric; 6.5x16 steel wheels; start/stop system; front bumper in grey with colour-coded trim; lashing points in cargo area; driver's seatbelt warning system; heat-insulating glazing; central locking with remote and interior actuation; permissible gross vehicle weight: 3.5 t. - Financing available via our partner banks. We are happy to assist you. Please note: subject to prior sale as this item is also offered on other platforms. Accessory specifications provided without guarantee. Changes, prior sale, or errors excepted. We offer and strongly recommend a viewing and inspection to ensure buyers have an accurate understanding of condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. Nwodpszgz Efofx Abzsi

Year of construction: 2025, condition: new, machine/vehicle number: H3000-H5000TM, Universal Testing Machine H3000TM-H5000TM according to DIN EN ISO 7500 The H3000TM-H5000TM series universal testing machine is a single-spindle machine with a robust design made of aluminum and V2a, featuring ball screws, ball bushing guides, and a toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and has a foil keyboard. A 2-line LCD display shows the force and displacement. The testing machine can be used as a standalone unit or connected to a PC via a USB interface. The displacement measurement is performed using an encoder with a visible resolution of 0.01 mm on the LCD (internally 0.0001 mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally, a second channel can be added for a second force transducer or a displacement sensor. The universal testing machine is manufactured with two different travel distances, 500 mm or 1200 mm (without load cell and testing tool). Further scope of supply: A load cell up to the nominal load, 220-volt cable, USB cable, description, CE declaration of conformity. Further information can be found in the attached description. Force transducer 3000N-5000N Measuring range: 5-5000N tensile and compressive, with nom. 2mV/V Output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate. Long-travel extensometer HE 900mm measuring path, measuring arms motorized, including electronics. Accuracy class Class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optically incremental Measuring path 900 mm, less the measuring length Display error 6 µm or 2 % Resolution 1 µm Actuation force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo setting is done manually Measuring arms Opening and closing are motorized Specimen diameter 0-30 mm Specimen thickness 0-30 mm Specimen width 0-100 mm Weight approx. 32 kg Scope of supply Extensometer complete with electronics Cutting, round: 1 set of hard metal / rubber Wear parts Measuring blades optional rectangular blades CAUTION: When using optional blades, Nwedpjiq Hxkjfx Abzsi a readjustment of the Lo stop is required.

Condition: used, EOS Transitube DCL 800/30 PM Powder Conveying System / Dosing System for 2 Components Description For sale is a used EOS Transitube DCL 800/30 PM powder conveying system from tim plast Anlagenbau GmbH. The system was developed for the continuous dosing, conveying, and homogenization of two material components. It is suitable for processing powders, granules, and ground materials in the plastics industry. The materials are dosed precisely, mixed via the Transitube conveying system, and continuously fed to the production machine. According to the manufacturer, the DCL series is designed for the continuous dosing and mixing of two components. Due to its robust industrial design and extensive scope of supply, the system is ideally suited for use with extrusion and injection molding machines. Technical Data Manufacturer: transitube / tim plast Anlagenbau GmbH Model: DCL 800/30 PM Designation: EOS Powder Conveying System Material hoppers: 2 × approx. 400 liters Conveying capacity: approx. 50–2,000 kg/h (material dependent) Dosing accuracy: ±0.5 to ±2 % Dosing range: 5–50 % Additive dosing: 0.2–10 % Mains connection: 3/N/PE 400 V AC Frequency: 50/60 Hz Connected power: 2.0 kW Dimensions (approx.): Width: 1,850 mm Nwodozn H D Nepfx Abzoi Depth: 900 mm Height: 1,320 mm Weight: approx. 180 kg Equipment 2 dosing hoppers with hinged lids Transitube screw dosing system Automatic control cabinet with touch panel Electrical control Conveying and mixing system Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Extensive hose and pipe package Accessories as shown in the pictures Application areas Plastics processing Extrusion Injection molding technology Powder conveying Granule conveying Ground material dosing Material mixing Production automation Condition Used. The system is in good condition with normal signs of wear and tear consistent with its age. The scope of supply corresponds to the photos shown. Scope of supply EOS Transitube DCL 800/30 PM powder conveying system Control cabinet Conveying units Motors Pneumatic components Piping Conveying hoses Extensive accessories as shown in the pictures Shipping Inspection possible by appointment at any time. Loading onto a truck can be arranged. Europe-wide shipping by freight forwarder possible for an extra charge. Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator Nwsdjzp Rmqopfx Abzji - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: used, mileage: 26,600 km, power: 174 kW (236.57 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,200 kg, first registration: 03/2024, emission class: euro6, color: white, suspension: air, number of seats: 6, fuel: diesel, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, E07 Hill Start Assist, Z3N Night Package, Q50 Trailer coupling with detachable ball head, FB4 AMG rear spoiler lip on tailgate, JA7 Blind Spot Assist, T56 Electric actuation for sliding door, left, T55 Electric actuation for sliding door, right, EY5 Mercedes-Benz emergency call system, BS1 Brake calipers with Mercedes-Benz lettering, EY6 Breakdown management, JS1 360-degree camera, FK4 Radiator grille painted black, LG2 LED Intelligent Light System, R1U AMG light-alloy wheels 8 J x 19 black, LG4 Tail lights, brake lights, and turn signals in LED technology, LG8 High Beam Assist PLUS, SE1 Active seat ventilation for passenger, SE0 Active seat ventilation for driver, EZ6 Parking package with 360-degree camera, XO7 Mercedes-Benz Mobilo with extended warranty and roadside assistance, EZ8 PARKTRONIC, SE5 Lumbar support for driver's seat, SE4 Lumbar support for passenger's seat, QA4 Towing capacity 2500 kg, T70 Childproof lock on doors in passenger compartment, ZC6 Sales code 1, T74 Grab handle for entry, Y10 First aid kit, MJ8 ECO Start-Stop function, 804 AEJ X3/1, IB6 Model series C447 Vito/V-Class, SF2 Passenger seat, electrically adjustable, SF1 Driver's seat, electrically adjustable, VL7 AMG floor mats, H00 Warm air duct to passenger compartment, H05 Seat climate control for 1st row in the rear, H07 Seat climate control for 2nd row in the rear, Z42 Approved as a passenger car, C70 Pedestrian protection, C74 Illuminated Mercedes-Benz lettering on door sill, H12 Auxiliary hot water heater, J55 Seatbelt warning system for passenger seat, H16 Seat heating for driver, H15 Seat heating for passenger, XA5 Weight variant 3,200 kg, JF1 Rain sensor, RF1 Tire brand Continental (10), SH2 Thorax-Pelvis Sidebag for passenger, SH1 Thorax-Pelvis Sidebag for driver, SH9 Windowbags for driver and passenger, H20 Heat-insulating glass all around, JW5 Lane Keeping Assist, JW8, We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM! Furthermore: Leasing/financing and trade-in possible! -Errors and prior sale excepted! -All information without guarantee ... more on our homepage. Nwodpfezgvp Sox Abzsi

Condition: as good as new (ex-display), Year of construction: 2026, Center height: 181 mm Center distance: 650 mm Maximum grindable workpiece diameter: 360 mm Max. load (overhung): 1000 N / 100 kg Max. load (between centers): 3000 N / 300 kg Z-axis Table swivel angle: 10° Table drive hydraulic: 0–4 m/min X-axis Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse positioning—air cushion: 280 mm Infeed drive via DC motor Rapid feed rate: 48 mm/min/Ø Infeed process: Plunge / Longitudinal grinding 4 pre-selectable feed rates: mm/min/Ø 0.01–48 4 pre-selectable infeed increments: mm/ 0.001–0.1 Spark-out during end stop grinding: s 0–99 / 0–99 strokes Jog infeed: mm/Ø 0.001 Grinding spindle headstock—universal, swiveling: degrees 0–180 Grinding wheel (external): D x width x bore mm 500x100x127 or 203.2 Grinding wheel (face, option): D mm 250x32x76.2 Grinding wheel (internal, option): D mm (2–250) Drive power (external, face): kW 5.5 (7.5) Drive power (internal): kW 2.2 Peripheral speed (external): m/s 35 (50) Grinding wheel wear (external): mm/Ø 160 Wheel guard width: mm 100 Grinding spindle diameter: mm 60 Internal spindle mount: mm 80 (100) Workpiece headstock: Infinitely variable drive, MK 4: 1/min 30–270/ 50–450 Workpiece spindle lockable Spindle mount: mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock swivels on the rotary part: degrees 0–90 Tailstock: Nedstqf Sqepfx Abzswi Quill mount / quill diameter: mm MK 4/750 Quill stroke mm: 45 Quill force N: 100–800 / 250–1400, adjustable Quill actuation: manual (foot switch) Quill fine adjustment: ±40μm Connections: Total power requirement of the machine: kW 6.5–10 Grinding spindle headstock: kW 5.5 (7.5) Workpiece headstock: kW 0.55 (1.1) Coolant cleaning: kW 0.75–2.2 Guideway lubrication pump: kW 0.1 Hydraulic pump: kW 1.5 Hydraulic tank: liters 80 Pneumatics: bar 6 Similar to Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller/ Fortuna

Condition: used, mileage: 313,520 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, first registration: 04/2020, emission class: euro6, color: white, number of seats: 8, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, VW T6.1 Special Equipment: - Discover Media streaming & internet audio-navigation system - Driver assistance system: front and rear parking sensors - Cruise control system (incl. speed limiter) - Heated rear window - ISOFIX mountings for child seat on rear seat - Multifunction display Plus - Seat package: 8-seater Additional Equipment: - Deactivatable front passenger airbag - Driver and front passenger airbags - Traction control system (ASR) - Electrically adjustable and heated exterior mirrors - Convex exterior mirrors - Brake Assist (HBA) - Multi-collision brake - Lockable glove compartment - Fuel tank: 70 litres - Bluetooth mobile phone interface - Engine: 2.0 L - 110 kW TDI - Non-smoker package Nsdpfx Aoxl Nxdjbzswi - Wheelbase: 3400 mm - Low emissions according to Euro 6d-TEMP - Engine start/stop system - Lashing eyes in load compartment - Seat belt warning system - Heat-insulating glazing - Central locking system with remote control and interior actuation - TÜV due: March 2027 Errors and prior sale excepted. Internal vehicle number: 11426