Used Adira Gho 1020 for sale (601)

Year of construction: 1980, condition: good (used), Offer 22501 Technical data approx: - max. working width 1020 mm - max. material thickness at 40 kg/mm² strength 1,5 mm - man. backgauge adjustable up to 550 mm Bljdjkzik Hepfx Ad Aeg - front angle stop - sheet holding-down device - table size 1100 x 650 mm - working height 900 mm - space requirement approx. W 1800 x H 1450 x D 850 mm - weight approx. 400 kg - mobile

Condition: good (used), Year of construction: 1984, machine/vehicle number: 6229, Offer 24483 Technical data: - max. working width 1020 mm Bedpfeu Eq Rpox Ad Aolg - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle setting preselectable 6 - 135 ° - 6-fold bending angle preselection - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - of the bending beam 50 mm - of the lower beam 50 mm - E. foot switch - Upper beam drive 400 V / 2.2 kW - Bending beam drive 400 V / 2.2 kW - Space requirement approx. W 2100 x H 1400 x D 1100 mm - Weight approx. 2000 kg

Year of construction: 2004, condition: excellent (used), Swiss type lathes MANURHIN K'MX overhauled with : – Spindle, counter spindle, geometry and changes of all non-conforming parts. Rotating tool on: rear comb, front comb, end unit, radial and axial counter operation C-axis on: main spindle and counter spindle Rigid tapping on: main spindle and backworking spindle High-pressure Predispo Year of construction 2004 – approx. 22 000 h Blsdpsir Id Uofx Ad Ajg

Condition: new, Year of construction: 2024, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, feed rate X-axis: 9 m/min, warranty duration: 12 months, HOLZ-HER Edgebander ARTEA 1020 Stock machine – Subject to prior sale Year of manufacture: 2024 - Base machine 1020 - Edge Control BC15 with Vi.Se. (Visual Setting) - LED machine lighting - Jointing milling unit - GluJet for PUR / EVA including adhesive reservoir - Milling - Profile scraper Bodpfxjxpgv Uj Ad Aslg - Surface scraper - Buffing unit

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 16100 € 309.12 € Bledpfjwiql Ajx Ad Aog 100 to fix 300 mm 680 mm 1020 mm 8 mm/s 5 mm/s 10 mm/s 500x1020 mm 100 mm 190 mm 2110 mm 1000 mm 2350 mm 1985 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 HAND CONTROL AND FOOT PEDAL table height adjustable according to CE regulations user manual in GERMAN and ENGLISH

Condition: used, Year of construction: 2023, gebraucht 2023 7280 prompt, Zwischenverkauf v Türkei 15700 € 1 100 to 1000 mm 300 mm 7.5 kW 2110 mm 1000 mm 2275 mm 1900 kg 1 680 mm 1020 mm 5 mm/s 10 mm/s 6 mm 100 mm 190 mm demo machine / mint condition Blsdpfxswiqm He Ad Ajg net price (price for new machine € 19.550,00) 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand panel and foot pedal height adjustable table user manual in Germanand English according to CE rules

Condition: new, - Working width 1020 mm - Max. sheet thickness approx. 2,5 mm (St 40) - Max. Bending angle 135 Accessories: - segmented upper beam - Foot pedal for tensioning - instruction manual Bodpfx Ajcca Rgsd Aslg

Condition: excellent (used), Buderus G 605 low temperature boiler 1020 kW Bledpfx Aewynuisd Aog

Condition: new, Technical Data: Working length: 1020 mm Max. sheet thickness: 2.5 mm Max. opening width: 48 mm Bending angle: 0 - 135° Width: 1350 mm Depth: 820 mm Height: 1140 mm Weight approx.: 285 kg Features: - Versatile bending machine suitable for sheet metal shops and repair workshops - Sturdy construction with modern design Bljdpfoct Rzbjx Ad Aeg - Easy adjustment of the upper beam via foot pedal, keeping hands free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a wide range of bending operations - Excellent price-performance ratio - Fast and simple bending process using the handle - Non-slip rubber coating on the foot pedal for safe operation - Easy lower beam adjustment according to sheet thickness - High upper beam for manufacturing deep-flanged profiles

Condition: used, Year of construction: 2022, functionality: fully functional, operating hours: 814 h, nominal power (apparent): 2 kVA, Kimla LF 1020 Powercut Fiber Laser 2 kW – Precision and Efficiency for Your Production Bodew Izayopfx Ad Aolg The Kimla LF 1020 Powercut fiber laser cutting machine equipped with a 2 kW fiber resonator is a technologically advanced solution designed for companies seeking maximum productivity, precision, and reliability in metal processing. As a product of a renowned Polish manufacturer, this machine combines innovative engineering with robust build quality, providing a competitive edge in today’s dynamic market. The LF 1020 model is optimized for processing sheet metal in standard sizes, offering a 1000 x 2000 mm working area, making it a versatile tool for a wide range of applications, from custom to series production. Key Features and Advantages: • Dynamic Linear Drives: Unlike conventional drive systems, Kimla’s proprietary linear motors provide extremely high acceleration and positioning speeds. This significantly shortens cutting times for intricate shapes and increases overall machine throughput. • 2 kW Fiber Source: The 2000 W fiber resonator is the ideal balance between cutting speed and versatility. It enables efficient processing of mild steel, stainless steel, aluminium, as well as non-ferrous metals such as copper and brass (subject to manufacturer’s approval), while ensuring excellent edge quality. • High Energy Efficiency: Fiber laser technology is far more energy-efficient compared to CO₂ lasers, resulting in lower electrical costs and reduced environmental impact. • Monolithic, Rigid Frame: The machine body is manufactured as a single, rigid component to ensure exceptional stability and resistance to vibrations, even at maximum processing speeds. This directly translates to top-level precision and repeatability of cuts. • User-Friendly Software: The integrated Kimla control system and software are operator-friendly, allowing for quick project preparation (CAD/CAM) and full control over the cutting process. • Low Operating Costs: No optical elements that require frequent maintenance (such as mirrors in CO₂ lasers) and the long service life of the fiber resonator minimize maintenance costs and downtime. Technical Specifications: Model: Kimla LF 1020 Powercut Laser Source Power: 2 kW (2000 W) Type of Resonator: Fiber Working Area (X/Y): 1000 mm x 2020 mm Drives: Magnetic linear drives Control System: Integrated Kimla system Applications: The Kimla LF 1020 laser is an ideal solution for: • Companies in the metalworking and sheet metal processing industries • Manufacturers of machines, equipment, and steel structures • The automotive sector • The advertising industry (visual elements, 3D letters) • Companies producing metal furniture and interior fittings

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, controller manufacturer: FANUC, controller model: 0i-MC, spindle speed (min.): 8,000 rpm, BRAND: AWEA MODEL: BM-1020 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 2011 CNC CONTROL: FANUC Series 0i-MD MACHINE WEIGHT: 6,500 kg MACHINE DIMENSIONS: Width: 3,603 mm; Depth: 2,780 mm; Height: 2,930 mm Spindle Taper size: ISO-40 Spindle speed: 8,000 rpm Spindle motor power (cont./30 min): 7.5/11 kW Working Capacity X-axis travel: 1,020 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Distance spindle center to column: 640 mm Distance nose of spindle to table surface: 125 – 725 mm Table Table size: 1,120 x 600 mm Table load capacity: 1,000 kg Feeds Rapid traverse (X / Y / Z axes): 24,000 mm/min Feed rate (X / Y / Z axes): 10,000 mm/min Tool Changer Tool taper: DIN 69871 – A40 Tool shank: DIN 69872 – A40 Tool magazine capacity: 24 stations Max. tool diameter (adjacent pockets full/empty): ⌀90 / ⌀150 mm Max. tool length: 250 mm Max. tool weight: 8 kg Accessories & Other Equipment Chip conveyor Coolant tank with wash pumps High pressure pump (15 bar) with external tank Bledpfxexxmcye Ad Ajg Spindle line air conditioner Manuals, Electrical Schematics, and CE Declaration THE FOLLOWING MAINTENANCE HAS BEEN PERFORMED ON THE MACHINE: * X and Y axis ballscrews serviced and bearings replaced. * Turcite on X/Y/Z axes re-scraped and renewed as required for machine realignment. * Complete check of the pneumatic and axis lubrication systems. * New rotary union for through-spindle coolant and tool unclamping press installed. * Oil changed on the ATC (Automatic Tool Changer). * X/Y/Z axis covers serviced with new seals and wipers.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, overall weight: 56 kg, warranty duration: 6 months, COLD WATER WASHER KARCHER HD 1020 B Bsdpowwhinjfx Ad Ajlg NEW LIFAN 190 F (15KM) COMBUSTION ENGINE The device has new accessories, including a pressure gun, stainless steel lance, steel braided hose and adjustable nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient Lifan 190 F combustion engine ensures stable operation even with long-term use Thanks to the operating parameters of 200bar and 800l/h, the machine can be effectively used for heavy work in construction, the logistics industry and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply: Combustion Engine: LIFAN 190 F 15 HP Pressing capacity [l/h]: 800 Working pressure [bar]: 200 Maximum pressure [bar]: 250 Weight [kg]: 56 Dimensions (length x width x height) (mm): 1044 x 582 x 668 Hose length [m]: 10 EQUIPMENT: NEW LIFAN 190 F (15HP) COMBUSTION ENGINE NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle GEKa water filter and claw couplings - FREE KEY FEATURES: Open oil system - no operating time limit Very legible and intuitive control panel Simple design and good access to individual components under the housing make the machine user-friendly and easy to service

Condition: used, functionality: fully functional, power: 18 kW (24.47 HP), first registration: 06/2011, overall weight: 1,300 kg, fuel type: diesel, color: green, axle configuration: 4x4, operation weight: 560 kg, empty load weight: 560 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, suspension: steel, Year of construction: 2011, operating hours: 698 h, Equipment: all wheel drive, hydraulics, Self-propelled work machine: + Egholm + ParkRanger 2150 AO + First registration: 14/06/2011 + 698 operating hours + Hydrostatic drive, Vmax 16 km/h + Articulated steering + All-wheel drive + 3-cylinder Daihatsu diesel engine, 953cc; 24 HP + Cabin + Front power lift + Front and rear hydraulics + Yellow warning beacon + Stainless steel disc spreader + Snow brush + Unladen weight: 560 kg; permissible total weight: 1,300 kg + 230 cm x 100 cm x 215 cm (LxWxH) Municipal vehicle from first owner Bedjy Ewvaopfx Ad Aelg Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typographical mistakes possible, subject to prior sale!

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Blsdpfop H Swdox Ad Ajg Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Year of construction: 2019, condition: like new (used), functionality: fully functional, machine/vehicle number: 1916180-002656, - Type: PSG ProfiTEMP+ 66 zones - Year of manufacture: 2019 - Serial number: 1916180-002656 - Power supply: 230 VAC (3~ / N / PE) 50/60Hz Blsdpfxoy Ah Dvo Ad Ajg - Power: max. 43kW, 3x63 A - Connections: XS3 RJ45, XS1 RS485 - Condition: Used only for test moulds - Brand: PSG Plastic Service GmbH - Extras: 8x cable with 24-pin plug & manuals

Condition: refurbished (used), Year of construction: 2015, Durst P10-200 with Corrugated Option, fully automatic Resolution: 10 pl - 1000 dpi Color: 6C + (optional White) Very low usage Speed up to 2025 m2/h Fully automatic loader (feeder) Bedpfsy Amckox Ad Ajlg Fully automatic unloader (stacker) INK: Paper and board with very low odor Options: Corrugated Option with 2 rails for dropping down material Corrugated static bar for different material thicknesses Corrugated software to control media and thickness - Understatic bar and automatic media stop for crash prevention - Caldera Rip Software Demo video is from Durst Rho 750 (28 pl, 600 dpi)

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 5 - 260 mm gear width: 400 mm max. module: 15 min. module: 0,5 Blodpfxoqvcnnj Ad Aeg gear hobbing diameter - internal: 30 mm max. helix angle: > 85 ° Aussenverz. max. helix angle: > 45° Innenverz. Testing Range vertical: 400 mm dist. between centers: 5 - 600 mm table diameter: 260 mm max. table load: 100 kg speeds: 30 1/min total power requirement: 1,6 kVA weight of the machine ca.: 900 kg dimensions of the machine ca.: 200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.) *

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Bledpfomhhypsx Ad Asg Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: Bodpfxjmhh Dho Ad Aslg 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Bledpomhh Dzsfx Ad Ajg - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm Bodpfx Aomhhx Iod Aelg - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone Blodpfx Aomhhyaod Ajg - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Bljdpjh Ek Dasfx Ad Aog - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) Bljdpfx Ajmhh Anjd Aog - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Bledpfx Adjmidyfe Asg Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.