Used Ageo Typ 80-960 /9585 for sale (18,742)

Condition: new, machine/vehicle number: 3703d600260244d5f159f51e4, empty load weight: 4 kg, maximum load weight: 33 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis Saddle Container Welded fine-grained steel construction, saddle plate with interchangeable 2 kingpins and 2 kingpin positions Container mounts: Incl. Rear extension retracted: 1 x 20 feet flush with the rear, attention low fifth wheel load Rear extension extended 1st stage: 1 x 30 feet, 2 x 20 feet, 1 x 40 feet with gooseneck tunnel Rear extension extended 2nd stage: 1 x 45 feet with gooseneck tunnel and overloaded to the rear without rear height adjustment and without folding center supports, no transport of containers without tunnel possible. Plug-in adapter for front locking, for locking the containers without tunnel from below, with holder when not in use Rear extension mounted on rollers, with hand crank 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Extendable underride guard for 45 foot containers Half-shell mudguards Incl. with anti-spray flaps according to EG Impact protection at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored line routing for easy service. 200 spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Bwedpfxsi Ri Eqo Aggen Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, rear and brake lights in LED, amber LED lighting on the side (Note! with certain towing vehicles, misdiagnoses can occur even though the function is is given) 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Operating instructions Attention: Transport of filled tank containers is excluded! When transporting 45 containers with a short tunnel, with or without front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16500 mm is exceeded! The underride guard must be extended manually! A special permit in accordance with § 70 StVZo is required! Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder 390 Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Support legs coated black Attention: Archive pictures!

Condition: new, machine/vehicle number: e4d182b7a074e7b83e540ed58, empty load weight: 5 kg, maximum load weight: 32 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis Saddle Container Welded fine-grained steel construction, saddle plate with interchangeable 2 kingpins and 2 kingpin positions Container mountings: Rear extension retracted: 1 x 20 feet flush with the rear, low fifth wheel load Rear extension extended 1st stage: 1 x 30 feet, 2 x 20 feet, 1 x 40 feet with gooseneck tunnel Rear extension extended 2nd stage: 1 x 45 feet with short gooseneck tunnel and overloaded to the rear Rear extension extended 2nd stage + front extension 1st stage: 1 x 45 feet with long gooseneck tunnel and chamfered corners With rear height adjustment and folding center supports for containers without tunnel Container guide at the front Plug-in and removable (electrical, air and brake connections at the front of the front cross member) Plug-in adapter for front locking, for locking the containers without tunnel from below, with holder when not in use Front extension mounted on rollers, can be pulled out manually (for 45 containers with long tunnel) Rear extension mounted on rollers, with hand crank 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Extendable underride guard for 45 foot containers Half-shell mudguards with anti-spray flaps according to EG Impact protection at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift & lower valve + auto-reset function Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. Special approval required if the total train length exceeds 16,500 mm. When transporting 45 containers with a short tunnel, with or without front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm is exceeded! The underride guard must be extended manually! A special permit in accordance with § 70 StVZo is required! Approval / plates Germany Test approval according to EG 2007/46 24/7 service hotline Prepared for single-line license plate holder Bodpfx Aei Rizueggjwn Warning sign

Year of construction: 2014, condition: excellent (used), functionality: fully functional, HSM roll cutting saw with dust collector and acoustic guard. TYPE: RT650/2800 Year of manufacture: 2014 Voltage 230 / 400 V - 50Hz Power 17kW Rolls diameters: 300 - 650 mm Bwedpfx Ast N T A Ioggon Roll widths: 1270 - 2750mm Machine dimensions LxWxH: 4690 x 2100 x 3000mm Weight: 5.5 tons

Condition: used, Year of construction: 1994, Overview  The Centrifugal Separator Type SB80-06-076 from the manufacturer GEA Westfalia was previously used at a brewery in Estonia. Due to a complete shutdown of the production plant, this unit is for sale. Till closing of the factory, the separator was used frequently. Tech Specs  4500 rpm with self cleaning drum Accessories  Spare Parts Tools Bjdpsv N Hcxjfx Aggswn

Condition: excellent (used), Year of construction: 2021, HAWKER battery 80 Volt type 8 PZM 1240 Dimensions: 1495 x 995 x 780mm Year of manufacture: 2021 Other sizes (24V, 48V, 80V) available on request! Bsdpfxoyvulmj Aggown

Condition: used, functionality: fully functional, used battery 80 Volt type 4 PzS620 Dimensions: 1025 x 708 x 784 mm Refurbished in KW 19 / 2026 with test report Capacity test (C5 discharge test) Remaining capacity: 96% Ready for operation, filled and charged incl. cable and Euro 320 A connector incl. Aquamatik Other sizes (24V, 48V, 80V) available on request! Bodpfoy Rfcljx Aggown

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 80 t, stroke length: 600 mm, table width: 600 mm, table length: 800 mm, throat depth: 300 mm, Equipment: CE marking, documentation/manual, safety light barrier, 80 Ton C-Frame Hydraulic Press – CHCP 80 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, deep drawing, cutting, and assembly operations. The CHCP 80 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, delivers reliable performance in medium and heavy-duty applications thanks to its robust frame, high capacity, and precise operating capability. Key Advantages - Rigid and vibration-free steel construction frame - High precision (≤120 microns/meter) - User-friendly PLC control system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long lifespan and low maintenance costs Fields of Application - Metal forming - Deep drawing and forming operations - Cutting and punching operations - Assembly and pressing tasks - Automotive and related industries Standard Features - Stress-relieved steel construction frame by vibration method - PLC control and touch panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances according to ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand operation control system - Cooling system Technical Specifications – CHCP 80 - Press Force: 80 Tons - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 600 x 800 mm - Press Depth: 1200 mm - Press Width: 600 mm - Table Height from Floor: 900 mm - Total Height: 2600 mm - Main Cylinder Diameter: Ø200 mm - Motor Power: 15 kW - Weight: 6500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused Bedsyzb Dtspfx Aggewn This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, power: 5.5 kW (7.48 HP), pressing force: 80 t, table width: 660 mm, table length: 860 mm, punching force: 80 t, drop-through hole in table: 180 mm, stroke adjustment: 110 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press that operates via a force generated by an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for mass production. Key Advantages: - Stable stroke performance and high repeatability in serial production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual-hand/foot control Typical Applications: - Cold shearing and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided guided slide • Spheroidal graphite cast iron connecting rod and gear bushings • Crankshaft and transmission shafts made of 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Double-coil safety valve • Manually adjustable stroke • Finger–hand protection light curtain safety system • PLC control system • Dual-hand/foot control system • Mechanical locking system • Emergency reverse motor operation • Occupational safety regulation compliant • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounting pads • Touchscreen LCD panel (standard between 150–300 tons) • Hydraulic safety system (standard between 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One die set to requested specifications • Eight-way slide guides ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Ton Throat depth: 280 mm Bed–ram distance: 400 mm Slide–table distance: 420 mm Distance between side frames: 400 mm Ram adjustment (slide adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1735 mm Approx. press height: 2220 mm Front anchor dimension: 670 mm Bwjdpjvtx H Rsfx Aggsn Side anchor dimension: 1040 mm Table hole diameter: Ø190 mm Table size: 540×740 mm Die clamping hole diameter: Ø40 mm Ram size: 370×230 mm Bed height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approximate weight: 4000 kg Note: Please inform us if you require modifications in the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are directly managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 80 t, table width: 600 mm, table length: 800 mm, table height: 850 mm, drop-through hole in table: 190 mm, ram adjustment: 85 mm, stroke adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 80 Tons Table-Ram Distance 400 Mm Distance Between Walls 880 Mm Bsdpfxovxhb Uj Aggown Ram Adjustment 85 Mm Press Approximate Width 1150 Mm Press Approximate Depth 1500 Mm Press Approximate Height 2500 Mm Table Hole Diameter 190 Mm Table Size 600 / 800 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/min. Engine Power 7.5 KW Engine Speed 1450 RPM Approximate Weight 6,500 Kg

Condition: new, Year of construction: 2025, pressing force: 80 t, stroke length: 500 mm, table width: 700 mm, table length: 700 mm, clearance between the columns: 700 mm, retraction force: 30 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 80/30 Ton Four-Column Hydraulic Deep Drawing Press General Description The CRONOSSTECH 80/30 ton four-column hydraulic deep drawing press is an industrial press solution designed for high-precision metal forming, deep drawing, and die testing applications. It features a rigid four-column body structure for superior accuracy and repeatability. The St52-grade steel frame is subjected to stress relief via vibration, ensuring excellent parallelism and perpendicularity tolerances are maintained during pressing operations. The ram and die cushion systems operate independently; stroke and pressure adjustments can be precisely controlled via the operator panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-based control, this press ensures long-lasting, safe, and energy-efficient performance. Maintenance requirements are minimized thanks to the automatic lubrication system and filter contamination alerts. Bjdpex N Ultofx Aggown This model is ideal for small- and medium-scale serial production, die trials, and precision forming processes. Key Advantages - Rigid four-column press body design - Independent stroke and tonnage settings for ram and die cushion - Full control via touchscreen panel - High repeatability and precision - Low maintenance cost, long service life Areas of Application - Metal forming operations - Deep drawing processes - Die trial and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column BODY MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs, induction hardened, chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 80 Tons CAPACITY (DIE CUSHION): 30 Tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 500 mm STROKE (DIE CUSHION): 150 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 600 mm WELDING STRESS RELIEF: By vibration WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 11 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DOWN SPEED: 150 mm/sec MOVABLE TABLE DRAWING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec DIE CUSHION FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 200 mm – Ck45 DIE CUSHION CYLINDER BORE: Ø 125 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3300 mm APPROXIMATE PRESS WIDTH: 1050 mm APPROXIMATE PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1100 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION SYSTEM: Automatic (Adjustable from HMI) RAM / DIE CUSHION STROKE AND TONNAGE ADJUSTMENT: Adjustable from HMI SYSTEM & PRESS STATUS DISPLAY: Viewable on HMI DIE MEMORY: Adjustable from HMI LINEAR POSITION TRANSDUCER: NOVATECHNIK or TURCK PLC: DELTA TOUCH PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5.5 Tons

Condition: new, Year of construction: 2025, pressing force: 250 t, stroke length: 800 mm, table width: 1,000 mm, table length: 1,000 mm, clearance between the columns: 1,000 mm, retraction force: 80 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 250 / 80 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 250 / 80 ton four-column hydraulic drawing press is a high-rigidity hydraulic solution designed for precision metal forming, deep drawing, and press applications. The frame is constructed of St52 grade steel and undergoes stress relief through vibration, ensuring high parallelism and perpendicularity tolerances during long-term operation. The ram and cushion systems operate independently; stroke and pressure settings can be precisely adjusted via the touch panel. With hydraulic components from REXROTH or PARKER, an IE3 efficiency-class motor, and PLC-controlled system, it offers high performance and reliable operation. An automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With its 250 / 80 ton forming capacity, this model is an ideal industrial press solution for medium- and heavy-duty metal forming, deep drawing, and die applications. Key Advantages - Four-column, high-rigidity press frame - Independent stroke and tonnage settings for the ram and cushion - Full control via touch panel - High precision and repeatability - Long service life with low maintenance costs Areas of Use - Metal forming applications - Deep drawing operations - Die testing and production lines Bedsx N Um Rjpfx Aggewn - Auxiliary pressing processes ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs. induction hardened chrome-plated shafts SLIDE GUIDING: Bronze Zr14 CAPACITY (RAM): 250 Ton CAPACITY (CUSHION): 80 Ton DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. OPENING HEIGHT: 100 mm MAX. OPENING HEIGHT: 900 mm STRESS RELIEVING: Vibration stress relief WELDING APPLICATION: WPQR & WPS accredited by TÜRK-AK – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 class MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT: 150 mm/sec FORMING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec CUSHION TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 360 mm – Ck45 CUSHION CYLINDER BORE: Ø 200 mm – Ck45 AUXILIARY BOOST CYLINDERS: 2 units APPROXIMATE PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 16 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 250 t, stroke length: 800 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 80 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-slide H-frame structure provides maximum rigidity during the pressing process, while parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 250/80 model, featuring a 250-ton main ram and an 80-ton lower cushion (pot) capacity, is designed for medium to high tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration to guarantee long-lasting, reliable performance. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press design - Vibration-stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK accredited procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable stroke control for ram and cushion (pot) - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination indicator - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHSP 250/80 Type: Steel construction, 8-slide H-frame press Frame Material: St52 – ERDEMIR Slide Bearings: Bronze Zr14 Capacity (Ram): 250 Ton Capacity (Cushion): 80 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 800 mm Cushion Stroke: 300 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relief Welding Certification: WPQR and WPS by TÜRK-AK accreditation EN ISO 15614-1/2017 (Welding procedures are overseen by certified “welding coordination engineers” per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Forward Speed: 30 mm/s Main Cylinder Bore: Ø360 mm – Ck45 Cushion Cylinder Bore: Ø200 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 4200 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Bjdpfex N Uaqex Aggswn Linear Distance Measurement: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 18 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: ready for operation (used), SCHARMANN WB 80 with Heidenhain digital readout - Travel X/Y/Z: 1300x1200x1200 mm - Heidenhain digital readout - Rotary table: 1200 x 1200 mm - Max. table load: 5000 kg - Spindle taper: MK 5 - Automatic feeds: 0.053 - 6.35 mm Bedoyic Tnjpfx Aggswn - Rapid traverses - Spindle speeds: 24 - 2880 rpm - Coolant system - Various accessories & tool holders Subject to errors and input mistakes

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Bwsdpfsunia Hsx Aggon

Condition: good (used), Technical specifications for the pallet rack upright: Shelving system: SSI Schäfer Type: PR 600 Included in delivery: 1x pallet rack upright, used Material color: Sendzimir galvanized Upright type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal braces, upright protectors, and base plates The uprights are pre-assembled (screwed framework) Height: 2,200 mm Depth: 800 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch Bwjdpfx Agswmkwtegen General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, mileage: 299,960 km, power: 206 kW (280.08 HP), first registration: 02/2019, fuel type: diesel, empty load weight: 9,530 kg, maximum load weight: 9,470 kg, overall weight: 19,000 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space volume: 65 m³, loading space length: 9,230 mm, loading space width: 2,480 mm, loading space height: 2,850 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), onboard computer, soot filter, tail-lift, traction control, trailer coupling, Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders; therefore, you will generally find the export price listed in our ads, as this is independent of the place of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures it is regularly updated. This information is intended as non-binding general guidance and does not replace detailed, individual advice when making a purchase decision. Only the terms stipulated in the purchase contract are binding. Subject to change, error, typographical mistakes, and prior sale. Only our general terms and conditions apply. Languages - We speak English - On parle français - ?? ????? ?? ???? - Mówimy po polsku - Hablamos español Bwedpfx Agsyckg Segen - Falamos português - Parliamo italiano

Condition: used, cooking length 4.000 mm belt width 800 mm all stainless steel suitable for steam heating temperature measurement 4 zones steam injection per zone (4 zones) air circulation per zone from bottom to top through the belt dimensions (l x w x h) : ± 6.200 x 1.700 x 2.200 mm Bwjdpfx Aey Uic Rsggjn adjustable speed

Condition: used, all stainless steel suitable for thermal oil heating nett belt length 7.000 mm nett belt width 700 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 12.500 x 2.400 x 3.900 mm thermic heating power 254 kw Bwsdpfx Agsy Uib Tsgon

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm Bwsdpsza Eipofx Aggjn - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7587 Technical data: - Shaft width: 410 mm - Number of knives: 3 pcs - Brake - Table length: 2540 mm - Cast iron tables - Both tables adjustable Bwodpfx Agjza D Spsgon - Original cast iron fence, angle-adjustable - Motor: 3 kW - Dimensions (L/W/H): 2540x1000x1050 mm - Weight: 730 kg Advantages: – Made in Poland – 3-knife shaft – Used jointer – Very good condition Net price: 7,900 PLN Net price: 1,880 EUR Net price calculated according to exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, functionality: fully functional, Combined profile shear (ironworker) for metalworking. Punches, cuts, notches, and severs structural steel (angles, flat bars, round bars, square bars) in a single machine. Robust East German/West German industrial design – extremely durable, easy to maintain, no high-tech frills. Features a large base plate and multiple workstations. Ideal for locksmiths, steel construction companies, metalworkers, blacksmiths, training workshops, or well-equipped hobbyists with sufficient space. A comparable new machine costs well over 15,000 EUR. Technical data: - Design: Combined profile shear with multiple stations (punching, shearing, notching, profiling) - Drive: Three-phase motor 400 V - Shear blades: included Bjdpfxozabv Sj Aggjwn - Punching tools: included (see photo) - Steel base plate: cast, very stable - Machine weight: approx. 1,500 - 2,500 kg - Year of manufacture: approx. 1970s-1980s Collection / Transport: Self-collection with a heavy-duty forklift (>= 5 tons) or crane. Loading on site is possible. Shipping via a low-bed trailer is available by arrangement.

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES Bwedpfezadr Nox Aggjn – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: new, new ! all stainless steel 2 speeds 2 mixing directions 1,8 kW – 2,5 kW safety lid Suitable for loader with “Easy Connect” Easy clean Hinged safety gard CE-approved overall dimensions (l x w x h) : 1.676 x 830 x 1.428 mm (open lid: H: 1.985 mm) The Barmix 180 litre twin shaft paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Bwodpoy Tuq Dofx Aggen Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood the mixer is ideal for mixing many products that are free flowing and easy to move around. The Barmix 180 features a special paddle shaft arrangement with one slightly higher than the other to give a more effective and quality mix. The effective mixing action with high peripheral wing speed gives good protein extraction and uniformed distribution of spices, additives and liquids. Also the Barmix 180 Litre Mixer produces a gentle mixing action which reduces particulate destruction maintaining the product structure and its original quality.

Condition: excellent (used), AUMA SAR 07.5-F10 + ADOR 63-4/80 Bwodpfx Agjzagi Dsgen

Condition: used, Year of construction: 1973, pressure 28 t distance between columns 510 mm dayligth 380 mm Bwodpfxsv Svc To Aggsn stroke 260 mm weight of the machine ca. ca. 750 kg