Used Alpha Laser Al500 for sale (3,187)

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 400 kg, total length: 1,800 mm, total width: 700 mm, total height: 1,700 mm, power: 15 kW (20.39 HP), operating pressure: 16 bar, pressure (min.): 6 bar, pressure (max.): 16 bar, noise level: 62 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 15 kW / 16 bar specifically designed for the high demands of laser cutting, providing clean compressed air (also available with 22 kW) Nodpfx Aoyll Enegrjlg complete 4-in-1 unit frequency-controlled servo motor 500-liter pressure tank refrigerant dryer fine filter new machine, delivery time approximately 1 week We would be happy to demonstrate the machine to you at our facility. highly efficient, permanent magnet servo motor frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color display single-stage screw unit air-cooled durable and low-maintenance optional: also available with an additional adsorption dryer Sales are exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria. technical data (approx.): length: 1.75 m, height: 1.75 m, width: 0.72 m weight: approx. 420 kg pressure: 16 bar flow rate: approx. 1.7 m³/min at 10 bar (1.2 m³/min at 16 bar) noise level: 62 ± 2 dB(A)

Condition: used, MDR 2000 Moving Die Rheometer Njdpfozul Dbjx Agrslg • Closed, bic conical chamber system • Fast microprocessor for temperature control • Torque measurement via friction-free torque transducer • High precision, high efficiency • Automation option for maximum productivity State-of-the-art vulcanization technology The MDR 2000 Moving Die Rheometer from Alpha Technologies has become the global standard for vulcanization technology. Two directly heated, bic conical tool halves with low mass provide fast and accurate temperature recovery. The oscillating lower tool half eliminates the need for a rotor, as in the Oscillating Disk Rheometer (ODR 2000). This results in faster temperature recovery and greater data accuracy. The resulting torque is measured by a torque transducer in the upper tool half, ensuring that friction forces from bearings and seals no longer affect the torque measurement. The torque signal is calibrated using a torsion spring rod with known values. This ensures long-term accuracy, repeatability, and reproducibility of the data. The unique closed chamber system enables above-average reproducibility and sensitivity to variations in the compound. Fast-responding temperature control is ensured by an optimized system. These properties, combined with a highly sensitive torque transducer and state-of-the-art microprocessor technology, offer the best in networking technology.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, type of input current: AC, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Nsdpsyxccrjfx Agrslg The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral cantilevers for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) Njdpfxet Dig Ee Agrolg - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus function for automatic determination of the focus distance - marking software EZCAD - Pilot laser (simple preview, clear text preview) - focus finder (easy focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with operating system Windows - dimensions: 800x 600 x 1660mm (LxWxH) - Weight: approx. 80 Kg

Condition: used, Year of construction: 2011, machine/vehicle number: E1053A0497, overall weight: 850 kg, For sale is a TRUMPF TruDisk 4002 (4C) disc laser / laser source, including a separate KLH cooling unit RW 20/0 SK. Nlodpfx Agezvqfyorog Laser technical data: * Manufacturer: TRUMPF Laser GmbH + Co. KG * Type: TruDisk 4002 (4C) * Year of manufacture: 01/2011 * Laser power: 4,000 W * Equipment No.: E1053A0497 * Supply voltage: 380 V (-10%) to 460 V (+10%), 3 AC + PE * Frequency: 50–60 Hz * Connection power: 23 kW / 25 kVA * Rated current: 34 A at 400 V * Protection class: IP54 * Weight: approx. 850 kg Cooling unit: * Manufacturer: KLH Kältetechnik GmbH * Type: RW 20/0 SK * Year of manufacture: 2017 * Part No.: E123223000AA * Serial number: 17KLH00670 * Voltage: 400/460 V * Frequency: 50/60 Hz * Refrigerant: R134a * Refrigerant quantity: 3.7 kg The TruDisk 4002 is offered together with the KLH cooling unit shown in the picture. Inspection is possible by arrangement. Further technical information and images can be provided upon request.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Description WE SELL AN VERY GOOD CONDITION 5 AXIS FANUC ROBOCUT YEAR 2015 Machine will come with full tools and full equipment and amm cutting material from stock ready to work, ITS WORKING STILL IN THE TOOL WORKSHOP. The FANUC ROBOCUT ALPHA C600IA wire EDM machine was manufactured in 2015 in Japan. It is a modern Japanese electro erosion wire cutter. The Fanuc Robocut cutter is adapted to the processing of various machine parts, e.g. dies, dies, punches, as well as parts with complex, complicated shapes and materials that are difficult to cut. This model was made to order and, unlike the standard model, has a travel of 410 mm in the Z axis. Nlsdpfjydr Adex Agrjg The new Robocat Alpha C600IA wire cutter currently costs approx 150,000 Euro net from the manufacturer. The cutter presented here was used sporadically in the tool shop for the production of prototypes and is in very good technical condition CONTROL: FANUC series 31i-W MODEL B 5 AXIS WORKING RANGE: X : 600 mm / 900mm/min Y: 400 mm / 900mm/min U: 200 mm / 450mm/min V: 200 mm / 450mm/min Z: 310 mm / 450mm/min MAX WORPIECE WEIGHT: 1000 KG MAX WORKPIECE DIMENSIONS: 1050 x 820 x 400 mm MACHINE POWER SUPLY: 13KVA FREQUENCY: 50 / 60 Hz MACHINE WEIGHT: 3000 KG MACHINE WILL BE WORKING TILL MIDLLE FEBRUARY AND WILL BE RELEASED FROM THE PRODUCTION FOR CUSTOMER WE ORGANIZE DISMANTLING SECURING AND LOADING. ALSO WE CAN OFFER TRANSPORT WORLDWIDE

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, CUTTING CAPACITY 4KW CUTTING PLATES 6000 X 2000 Workpiece dimensions6000 x 2000 mm Type of LaserFanuc Power4000 Watt ControlFanuc Longitudinal travel X-axis6100 mm Cross travel Y-axis2020 mm Hight travel Z-axis280 mm Travel speed84 m/min Max cuttingthickness in steel20 mm Max cuttingthickness in Inox15 mm Motor Power95 kW Length16 500 mm Depth5300 mm Hight2050 mm Weight26 000 kg Shuttle tableyes Nodpfx Ajvkkkpjgrslg MACHINE WAS COMPLETE OWERHAULED 2 YEARS AGO - SERVIS COST WAS 35000 EUR LAST SERVICE WAS MADE 6 MONTHS AGO MACHINE IS STILL RUNNING IN THE PRODUCTION TILL FIRST WEEK IN MARCH 2022 WE OFFER MACHINE LOADED ON TRUCK. NEEDS 2 TRUCK FOR TRANSPORT, NORMAL TRUCK FOR CLIENT WE CAN ORGANIZE TRANSPORT AS WELL WE OFFER MACHINE FREE LOADED ON TRUCK. LASER- GE FANUC C4000 - MODEL E TRANSPORT FOR CUSTOMER WE CAN ORGANIZE AS WELL

Condition: ready for operation (used), Year of construction: 2023, Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without computer, to be provided by the customer, Extraction unit: 2x extraction fans 5.5kW each, Scanner: Manual barcode scanner, Unwinding device: for material rolls with unwinding bar, Unwinding system: Connection available. The system was only installed and approved, series operation did not take place. On-site inspection is possible, documentation available. Nlodpswbuzfsfx Agreg

Condition: ready for operation (used), Year of construction: 2021, A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Nlodpfx Aox Ectujgrog

Year of construction: 2013, condition: ready for operation (used), An IPG laser source with peripheral equipment is available. 1) IPG Laser YLS-3000-CT, year of manufacture: 2013, wavelength: 1070nm, modulation: 0kHz-5kHz, power control range: 10%-100%, power stability: +/-1%. Machine dimensions X/Y/Z: approx. 800mm/800mm/560mm, weight: approx. 400kg. 2) Industrial chiller IPG Laser LC 170.01-A.3.5, year of manufacture: 2013, cooling capacity: 17kW, max. operating pressure: 28bar, refrigerant: R407C, refrigerant quantity: 3.5kg. 3) Wire feeder Dinse DIX WD 300, feed rate: 20m/min, wire diameter range: 0.8mm-1.6mm, machine dimensions X/Y/Z: approx. 300mm/250mm/250mm. 4) Laser process head. Documentation available. On-site inspection is possible. Nlsdpfxex H S Nwj Agrog

Condition: ready for operation (used), An Alpha viscometer for testing raw elastomers and rubber compounds is available. Test standards: ASTM D1646/D3346, max. temperature: 200°C, rotational speed: 2rpm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible. Nlsdpfx Aoxrukrogreg

Year of construction: 2021, condition: ready for operation (used), Weighing heads: 10, max. weighing capacity: 6500g, individual weighing capacity: 10g-800g, scale volume: 1600ml, max. capacity: 70/min, number of programs: 100, dimensions X/Y/Z: approx. 1100mm/1100mm/1350mm, weight: approx. 330kg. The multihead weigher is sold as a complete system including accessories, peripherals and spare parts. Documentation available. Nodet Rkaaopfx Agrolg

Year of construction: 2020, condition: ready for operation (used), A handheld pulse laser cleaning machine is available. Laser source: Raycus RFL-P200, laser power: 200W, cooling medium: water, frequency: 50kHz, max. speed: 10m/s, max. cleaning width: 50mm. The machine is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Nlsdpozfaaxofx Agrog

Year of construction: 2007, condition: ready for operation (used), A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible. Nsdpeww Ivnefx Agrolg

Condition: ready for operation (used), A Moving Die Rheometer Alpha for rheological testing and vulcanization analysis of rubber compounds is available. Test standards: ASTM D5289/ISO6502, max. temperature: 200°C, frequency: 1667Hz, strain: 0.2°/0.5°, test pressure: 8000kPa. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible. Nodpfx Aoxrukljgrslg

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, laser type: fiber laser, laser power: 80,000 W, table length: 31,500 mm, table width: 6,300 mm, travel distance X-axis: 4,050 mm, travel distance Y-axis: 25,050 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 55,000 kg, total length: 34,000 mm, total width: 12,000 mm, Equipment: cooling unit, safety light barrier, Working area (mm) : 26000×3500（Bevel cutting：25500×3000） X axis travel distance (mm): 4050 mm Y axis travel distance (mm): 25050 mm Z axis travel distance (mm): 450 mm X/Y axis positioning accuracy : ±0.03 mm/m X/Y axis repeat positioning accuracy: ±0.02 mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2 G Nsdov E Hwzopfx Agrolg It can support cutting of various groove types such as V, Y, X, etc., with a maximum groove of ±45° and one-time forming, reducing the number of beveling processes, reducing costs and increasing efficiency.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, 3015H high-speed laser sheet metal machine High speed enables efficient processing 1.5G acceleration 50%–100% increase in thin sheet processing efficiency 7Hz low-pass filtering Enables high-speed, high-precision cutting of complex shapes Over 50% improvement in fine processing efficiency High speed and high efficiency drive high productivity Our high-speed cutting machine features a dual-station high-speed shuttle table Achieves 15-second fast parallel exchange Nedpswvpcmefx Agrelg Loading/unloading and cutting processes run simultaneously without interference significantly boosts processing efficiency Doubles output per unit of time Crafted with care for eco-friendly design Equipped with zoned dust extraction Features 8–30 fully automatic high-power negative pressure extraction systems Smooth smoke discharge and excellent dust removal efficiency In terms of safety, our high-speed machines are more considerate Standardized with an industry-unique intelligent anti-collision human detection system Includes door interlock protection and motor torque detection Ensures safe production Designed to reduce the workload in sheet metal processing Equipped with a fully automatic lubrication system A total of 16 automatic lubrication points across the XYZ axes Extends component lifespan by 300% Delivers higher running precision with lower maintenance costs

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: Max Photonics, laser source model: MAX 6 kW mit CE, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, positioning accuracy: 0.3 mm, repeat accuracy: 0.3 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 8,000 kg, total length: 8,500 mm, total width: 3,500 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber Laser Cutting Machine 1530, 12 kW – Overview Safety & Protection Fully enclosed metal protective chamber with radiation-resistant doors and windows. Environmentally friendly and safe for operators. Work Platform High- and low-positioned parallel platform: Front end: laser cutting. Rear end: loading and unloading. No mutual interference → increased work efficiency. Machine Structure Nedpfxjy R I Nho Agrelg 10 kW bed structure: Time-segmented, zoned dust extraction. Superior heat dissipation, resistant to thermal effects. Industrial auxiliary equipment: air conditioning, special cooling system, constant temperature & humidity → stable performance & longer service life. Precision Assurance: Bed processed by large gantry milling machine. Industrial-grade guide rails, racks, ball screws. Full servo drive, double-sided dual drive. High industrial quality and precision. German assembly technology: Precision calibration with laser interferometers Fine craftsmanship, easier maintenance. Control & Software FSCUT 6000 control system (included). FSCUT software suite: Market-proven, safe, and user-friendly software. Supports smart networking. Professional nesting software: CypNest (included). Core Components Laser cutting head BOCI BLT442 Laser source MAX 6 kW, CE certified Water chiller HANLI 6 kW Guideway TAIWAN DTX 30+20+20 Frame TAIWAN JT Reducer Germany Techmach Cameras (2 pcs) Servo motor BOCHU Proportional valve Felton Electronic components SCHNEIDER Triple air inlet: nitrogen, oxygen, air Lubrication system: automatic oil supply system Accessories 30 protective lenses, 30 nozzles, toolbox. Optional: air compressor ARS-30HP-XF-1,6 MPA, dust collector 7.5 kW.

Condition: new, grinding height: 150 mm, height adjustment type: mechanical, total height: 1,450 mm, total length: 1,800 mm, total width: 1,400 mm, overall weight: 850 kg, Equipment: CE marking, Structuring and Sanding Machine / 4-Side Brushing Machine Manufacturer: Alpha Brush Model: LS-TSB Versatile brush sanding machine equipped with a total of 6 brush units for 4-sided sanding and structuring of wood materials such as panels, solid wood flooring, scaffolding boards, facade boards, etc. Working width: 300 mm Nsdpfoykh Tfjx Agrslg Workpiece height clearance: 150 mm Equipped with: - 1x top brush unit, 2.2 kW - 1x bottom brush unit, 2.2 kW - 1x top brush unit, 2.2 kW - 1x bottom brush unit, 2.2 kW - 1x left-side brush unit, 1.1 kW - 1x right-side brush unit, 1.1 kW Infinitely variable speed control for each brush group (top, bottom, sides) Brush diameter: 260 - 300 mm Quick-change system for brush heads Spring-mounted pressure roller, individually height adjustable Feed rate infinitely variable, approx. 2 - 20 m/min., 0.75 kW Digital display for settings Recommended extraction capacity: 3000-3500 m³/h Voltage: 400 - 480 V, 3 Ph, 50/60 Hz Protection: 32 A Dimensions (LxWxH): approx. 1800 x 1400 x 1450 mm Weight: approx. 850 kg

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 2 h, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: water, warranty duration: 12 months, laser wavelength: 355 nm, input frequency: 50 Hz, Equipment: cabin, UV laser engraving machine with 20-watt laser power Laser source with 355nm wavelength / 20 watts Exhibition machine, with approximately 2 hours of operation - No discernible signs of wear - Includes rotary axis - Includes Windows 64-bit PC system - Includes 22" monitor - Everything is fully installed and calibrated - Engraving software in German - 3D software (MM3D) - Very easy to operate - Simply turn on and start - UV laser source with 20 watts for high-contrast and fast marking with extremely high resolution - Engraving on virtually all metals (stainless steel, brass, aluminum, etc.) - Engraving on virtually all plastics (including PVC, silicone, etc.) - Engraving on real glass (including crystal glass) - Cutting of real glass is possible - Heavy-duty industrial quality - Complete system / ready for immediate use - Work area approximately 500 x 600 x 600 mm (L x W x H) - Clamping surface with mounting threads in a 50mm grid - LED work area lighting Nlodpsflrnasfx Agrjg - 50mm pipe connection for fume extraction - Engraving area approximately 150x150 / 200x200 / 300x300 (switchable) - 3D scanner for marking surfaces of any shape - Includes foot switch to start the engraving process Sales are exclusively to commercial businesses. Delivery / Consultation / Sales only in Germany / Austria / Switzerland Please also note our attractive leasing/hire purchase offers. Machine dimensions approximately: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 180kg

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Weight (kg) 1000 Length (m) 2.3 Height (m) 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. The machine is in very good technical condition. Nljdpfjzt A H Rox Agrsg The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, product height (max.): 100 mm, space requirement height: 1,750 mm, space requirement length: 1,200 mm, input frequency: 50 Hz, workpiece weight (max.): 300 kg, Equipment: type plate available, Alpha Brush KS-WBM Sanding Machine, Texture Brushing Machine Nodpsw Avrhofx Agrslg This machine gives surfaces, such as profile boards for facades or wall cladding, a noticeably more sophisticated and rustic look! With up to 400 mm working width and customizable configuration for both softwoods and hardwoods, this machine is a versatile tool for carpentry workshops, planing mills, or joineries. We offer not only the texture brushing machine itself, but also the appropriate extraction unit and a variety of brush heads to equip the machine, allowing you to achieve your desired effect on wooden surfaces. In addition to this sanding automaton, we also supply coating machines that allow you to stain or finish boards and panels in one step. Do you have questions? We are happy to advise you individually on your requirements.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser source manufacturer: Max Photonics, laser source model: Max Photonics 6kW mit CE, laser power: 6,000 W, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, pipe diameter (max.): 240 mm, pipe length (max.): 6,050 mm, working length: 8,050 mm, working width: 250 mm, working height: 250 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 6,500 mm, travel distance Z-axis: 280 mm, feed rate X-axis: 116 m/min, feed rate Y-axis: 131 m/min, feed rate Z-axis: 30 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 100 kg, power: 6,000 kW (8,157.72 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 5,000 kg, total length: 12,500 mm, total width: 2,400 mm, total height: 2,550 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, With a fully redesigned machine concept, it unites maximum stability, highest efficiency, precise processing, and intelligent automation in one system. This makes it optimally suited for processing a wide variety of metal tubes and profiles – flexible, reliable, and powerful. A patented, innovative design combined with an exclusive automatic loading and unloading system significantly boosts productivity. The system operates faster, more stably, and more intelligently, and is available in different configurations to suit your individual requirements. Thanks to enhanced dynamics and increased performance, the machine delivers outstanding results across all processing operations – whether cutting, drilling, or complex contour cutting. The cutting quality is of the highest standard: smooth surfaces, minimal thermal impact, and virtually no residue or rework required. Numerous patented core technologies ensure consistently high processing accuracy and perfect results – even in demanding continuous operation. Even after many years of intensive use, the system’s performance remains at an exceptionally high level. This makes your investment a sustainable, future-proof solution for your production. Cutting power: 6000W Nsdpfx Ajy R I R Eogrslg Laser source: MAX Photonics Laser head: BOCI Autofocus Max. tube length: 6500mm Tube diameter: 240mm Acceleration: 1.2G

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: Max Photonics, laser source model: MAX 6kW mit CE, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, table length: 4,000 mm, table width: 2,000 mm, working length: 4,000 mm, working width: 2,000 mm, positioning accuracy: 0.3 mm, repeat accuracy: 0.3 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 8,500 kg, total length: 10,500 mm, total width: 4,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber Laser Cutting Machine 4020, 6 kW – Overview Safety & Protection Fully enclosed metal safety enclosure with radiation-proof doors and windows. Environmentally friendly and operator-safe. Work Platform High and low parallel platform: Front end: Laser cutting area. Rear end: Loading and unloading area. No mutual interference → increased work efficiency. Machine Structure 10 kW bed structure: Time-segmented, sectional dust extraction. Effective heat dissipation, resistant to thermal deformation. Industrial auxiliary equipment: air conditioner, dedicated cooling system, constant temperature & humidity → stable performance & extended service life. Precision Guarantee: Bed processed with large gantry milling machine. Industrial-grade linear guides, racks, and ball screws. Full servo control, double-sided dual drive. High industrial quality and precision. German assembly technology: Precision calibration with laser interferometers. Fine craftsmanship, easier maintenance. Control & Software FSCUT 6000 control system (included). Nlodpfxsy R I N Ie Agrsg FSCUT software suite: Industry-standard, secure, and user-friendly software. Supports intelligent networking. Professional nesting software: CypNest (included). Core Components Laser cutting head: BOCI BLT442 Laser source: MAX 6 kW, CE certified Water chiller: HANLI 12 kW Linear guide: TAIWAN DTX 30+20+20 Rack: TAIWAN JT Reducer: Germany Techmach Cameras: 2 units Servo motor: BOCHU Proportional valve: Felton Electronic components: SCHNEIDER Triple air inlet: nitrogen, oxygen, air Lubrication system: Automatic oil supply system Accessories 30 protection lenses, 30 nozzles, toolbox. Optional: Air compressor ARS-30HP-XF-1, 1.6 MPA, dust collector 7.5 kW.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,550 mm, total height: 2,050 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Nlsdpfozntfmox Agrog Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg