Used Arburg Injection Molding Machine, Golden + Handling for sale (72,769)

Condition: used, Year of construction: 2006, Operating hours: 30,471,625 Lsdpfxszlg Uvj Amtshi Clamping force: approx. 800 t Tie bar spacing: approx. 420 mm Flow rate: approx. 103 l/min Frequency: 50 Hz Power supply: 400 V Pressure: approx. 210 bar Current: 82 A Weight: approx. 4.0 t

Condition: used, Year of construction: 2000, Clamping force: approx. 200 t Number of components: 2 Mold installation height: approx. 310 / 760 mm Lhsdpfx Ajzlg S Ijmtsi Opening stroke: approx. 300 / 575 mm Tie bar spacing: approx. 560 × 560 mm Horizontal screw diameter: approx. 50 mm Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 2 Special equipment: Needle gate Hot runner zones: 16 Flow rate: approx. 190 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 196 A Current 2: 110 A Current 3: 86 A Current 4: 67 A Weight: approx. 9.7 t

Condition: used, Year of construction: 2001, Operating hours: 193589 Clamping force: approx. 250 t Number of components: 1 Tie bar distance: approx. 840 × 840 mm Horizontal screw diameter: approx. 45 mm Core pull: 2 Hot runner zones: 0 Flow rate: approx. 206 l/min Frequency: 50 Hz Ledpfxozlg N Ho Amtshi Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 139 A Current 2: 102 A Current 3: 37 A Current 4: 67 A Weight: approx. 10.7 t

Condition: used, Year of construction: 2014, Operating hours: 27,317 Clamping force: approx. 180 t Number of components: 2 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Lodpfx Aezlgvysmtohi Hot runner zones: 28

Condition: used, Year of construction: 2015, Operating hours: 52873 Clamping force: approx. 180 t Number of components: 2 Horizontal screw diameter: approx. 35 mm Lhsdpezlgu Nefx Amtoi Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 28 Frequency: 50 Hz Supply voltage: 400 V Weight: approx. 10.1 + 0.6 t

Condition: used, Year of construction: 2015, Operating hours: 8877 Lhedpfx Amjzlgkdotoi Clamping force: approx. 180 t Number of components: 3 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 34 Frequency: 50 Hz Supply voltage: 400 V Approximate weight: approx. 10.1 + 0.6 t

Condition: used, Year of construction: 2015, Operating hours: 48039 Lhsdjzlfmwopfx Amtei Clamping force: approx. 180 t Number of components: 2 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 28 Frequency: 50 Hz Supply voltage: 400 V Weight: approx. 10.1 + 0.6 t

Condition: used, Year of construction: 2022, Operating hours: 45851 Clamping force: approx. 180 t Lhsdszlfl Hspfx Amtei Number of components: 2 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 28 Frequency: 50 Hz Supply voltage: 400 V Weight: approx. 10.1 + 0.6 t

Condition: used, Year of construction: 2015, Operating hours: 39326 Clamping force: approx. 100 t Number of components: 1 Lhedpfx Amjzlffyjtji Tie bar spacing: Tie-bar-less Horizontal screw diameter: approx. 40 mm Core pull: 0 Hot runner zones: 4 Clamping system: Toggle (KH) Max. stroke: approx. 175.0 mm Screw speed: approx. 420 rpm Heating zones: 4 Heating power zone 1: approx. 4.23 kW Heating power zone 2: approx. 3.00 kW Heating power zone 3: approx. 3.00 kW Heating power zone 4: approx. 3.00 kW Injection servo: No Measuring system: Incremental encoder Pressure sensor type: Diaphragm Temperature control: J-type thermocouple

Condition: used, Year of construction: 2017, Operating hours: 22,800 Lodszlfc Eepfx Amtshi Frequency: 50 Hz Supply voltage: 400 V Weight: approx. 26.8 t

Condition: used, Year of construction: 2022, Lot consists of: (1) Injection molding machine, temperature control: HB Therm | Miscellaneous: 1x conveyor unit by Motan Technical Details: Power supply: AC400V 3P/N/PE Frequency (Hz): 50 Current (A): 228 Installed power (kW): 137 Motor power (kW): 63.5 Heating power (kW): 33 Short-circuit rating (kA): 25 Screw diameter (mm): 65 Injection unit: 2230 Machine weight (t): 22.0 Lhedpoy N R Htofx Amtji

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 178759, clamping force: 2,000 kN, screw diameter: 35 mm, installation height: 350 mm, total length: 5,000 mm, total width: 2,200 mm, total height: 3,800 mm, overall weight: 13,000 kg, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, controller manufacturer: ARBURG, table diameter: 1,500 mm, ARBURG ALLROUNDER 1500 T 2000-350 Injection Molding Machine - Clamping force: max. 85 kN - Opening force: max. 120 kN - Opening stroke: max. 300 mm - Distance between mold plates: max. 650 mm Lodpfx Aszlfmkomtehi - Screw travel: max. 145 mm Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach – loaded onto a truck.

Condition: used, Year of construction: 1998, operating hours: 101,215 h, machine/vehicle number: 23J01415, clamping force: 23,000 kN, injection weight: 6,100 g, total length: 4,500 mm, total height: 3,800 mm, overall weight: 205,000 kg, # Sales Description A high-performance injection molding machine from the renowned manufacturer KraussMaffei is available for sale. This is the KM 2300-14700 MC model, designed for large-volume plastic parts and industrial series production. The machine features a clamping force of 23,000 kN and is equipped with a screw diameter of 105 mm and a maximum shot weight of 6,100 g. This makes it particularly suitable for applications involving large components and high material volumes. Ledpfxjyt Hide Amtehi The system is equipped with extensive peripherals, including a robot interface for KUKA KRC4, a sequential injection controller S.I.S.E. IS’Tech, cooling units from GWK, and a Motan Colormetric dosing and mixing system. In addition, a belt conveyor is included. The machine was manufactured in 1998 and has been in an industrial production environment. Key technical data: * Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 6) * Year of manufacture: 1998 * Operating hours: approx. 101,215 h Technical specifications: * Clamping force: 23,000 kN * Screw diameter: 105 mm * Max. shot weight: 6,100 g * Machine weight: approx. 205,000 kg * Machine dimensions: * Depth: approx. 4,500 mm * Height: approx. 3,800 mm This machine offers a solid and proven solution for industrial plastic processing and is particularly interesting for companies requiring large-format injection molding capacity.

Condition: like new (used), Year of construction: 2015, operating hours: 47,247 h, functionality: fully functional, machine/vehicle number: 230999, clamping force: 500 kN, screw diameter: 35 mm, displacement volume: 115 cm³, injection weight: 105 g, Equipment: documentation/manual, Here, as a dealer of injection molding machines, we offer the following well-maintained used injection molding machine: Of course, we also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 320C 500-170 Serial Number: 230999 Year of Manufacture: 2015 Operating Hours: 47,247 h Control System: Selogica Dimensions L/W/H: 3.12 x 1.43 x 1.99 Weight: 2300 kg Functionality: fully operational Condition: very well maintained Extras: 1x core pull Thermoplastic screw/cylinder, 35 mm, highly wear-resistant 1 x blow-out Coloring interface - extended monitoring - extended movement sequence - extended clamping - production control - job change - complete documentation and software (on CF card) German language - from first owner - origin Germany - regular maintenance by the manufacturer and previous owner Visible peripheral devices are not included in the offer - only if they are explicitly mentioned. Injection unit Screw diameter: 35 mm Injection weight: 105 g/PS Lodpfx Aov U Tl Djmtohi Injection pressure: 1,470 bar Injection volume: 115 ccm Clamping unit Clamping force: 50 tons / 500 kN Tie bar spacing: 320 x 320 mm Platen size: 446 x 446 mm Tool installation height: 200 mm Max. distance between platens: 550 mm Ejection stroke / force: 125 mm / 30 kN Clamping unit: hydraulic Motor power: 11 kW Heating power: 9.4 kW Total power: 21 kW The machine is immediately available in our warehouse in Hanover/Germany and has been tested. ✔ Warranty Warranty until first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to your location against reimbursement of freight costs - worldwide delivery possible Immediately available in our warehouse in Hanover/Germany For information about the machines we offer and our company: - we only sell machines that we have purchased ourselves from current production, from our warehouse in Hanover. - all offered machines are checked and tested before dismantling. - we do NOT sell insolvency goods - we are NOT a broker dealing with third-party property. - all offered machines come from successful companies for which maintenance and care are a matter of course. - all offered machines are in our warehouse and can be inspected while powered on.

Condition: excellent (used), Year of construction: 2013, clamping force: 3,500 kN, screw diameter: 60 mm, clearance between the columns: 720 mm, displacement volume: 763 cm³, injection pressure: 1,905 bar, injection weight: 695 g, mold height (min.): 350 mm, Basic data Model: 1450 injection unit / 350 t clamping force Year of manufacture: 2013 Control system: NC5 Injection unit Screw diameter: 60 mm Injection volume: 763 cm³ Injection shot weight: 695 g Specific injection pressure: 1905 bar Screw L/D ratio: 20 Clamping unit Clamping force: 350 t Lhjdpfx Amezl D Erotei Tool plate dimensions: 1040 × 1060 mm Distance between tie bars: 720 × 720 mm Mold height: 350–745 mm Opening stroke: 730 mm Maximum plate distance: 1475 mm Ejector stroke: 200 mm Dimensions and weight Dimensions (L × W × H): 7.64 × 2.01 × 2.27 m Weight: 15,540 kg Tooling and equipment 4 × hydraulic core 12 heating zones for the mold 2-circuit pneumatic cascade control Indunorm quick couplings 2 pneumatic valves on the moving platen Increased pump drive power activeDrive – pump with adjustable speed activeProtect – active mold protection Wear-resistant screw Bimetallic cylinder Injection with p+v regulating pump (closed loop) EUROMAP 67 robot interface

Year of construction: 1999, condition: excellent (used), INJECTION MOLDING MACHINE KRAUSS-MAFFAI 150-700 C1 Year of manufacture: 1999 Lhodpfx Amjh S Dncjtsi Screw diameter: 55 mm In excellent condition, still in operation.

Condition: excellent (used), Year of construction: 2021, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 248761, clamping force: 4,000 kN, screw diameter: 70 mm, clearance between the columns: 1,200 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,114 g, mold height (min.): 450 mm, ejector force: 964,000 N, ejector stroke: 250 mm, opening stroke: 1,009 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,200 mm, total length: 7,900 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 5,800 kg, heating capacity: 25 kW (33.99 HP), pressure: 200 bar, number of injections: 1, pump power: 56 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition. It has been well-maintained. The machine only sprays PS. It features a CC300 control system. The machine has additional equipment, including 3 air valves, two hydraulic valves, 8 tool heating zones, a water reservoir with 8 zones, screw heater insulation, a euro-map for the robot, a robot track guard, and a system for operating with the rear doors open. The machine also has water blocks on both the moving and stationary tables, each with 8 outlets. The machine is being sold with the factory-installed robot shown in the pictures, but the robot system is not integrated into the machine, so it can be removed as a separate unit or a different robot can be installed in its place. Lhedpfx Amjznl Rbjtsi

Condition: excellent (used), Year of construction: 2023, operating hours: 4,050 h, functionality: fully functional, machine/vehicle number: AEFM6009, clamping force: 10,000 kN, screw diameter: 110 mm, clearance between the columns: 1,100 mm, column diameter: 180 mm, displacement volume: 4,941 cm³, injection pressure: 1,840 bar, injection weight: 4,546 g, mold height (min.): 450 mm, ejector force: 289,000 N, ejector stroke: 350 mm, opening stroke: 1,200 mm, plate length: 2,350 mm, plate width: 1,570 mm, plate height: 1,570 mm, total length: 11,300 mm, total width: 2,550 mm, total height: 3,400 mm, overall weight: 44,000 kg, heating capacity: 51 kW (69.34 HP), pressure: 178 bar, number of injections: 1, pump power: 136,000 W, power: 195 kW (265.13 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 371 A, Equipment: documentation/manual, The machine has relatively few operating hours and is in very good condition. It has been well-maintained. The machine processes only ABS, PP, and PS. It is controlled by a Beckhoff system. The machine is equipped with extensive additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 24 tool heating zones, a water manifold with 6 zones, a screw heater insulation, hydraulic screw rotation for die replacement, a die with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. In addition, water blocks are fitted to both the moving and stationary tables, each with 8 outlets. Furthermore, a number of spare parts are included with the machine, such as a complete die, a screw die, heaters, temperature sensors, and various seals for the hydraulics, as well as a self-filtration filter, a die wrench, and auxiliary ejector rods. The machine is being sold without the robot shown in the pictures. Lhsdpoznll Ssfx Amtji

Condition: excellent (used), Year of construction: 2021, operating hours: 6,300 h, functionality: fully functional, machine/vehicle number: ADFL9004, clamping force: 80,000 kN, screw diameter: 98 mm, clearance between the columns: 1,020 mm, column diameter: 160 mm, displacement volume: 3,142 cm³, injection pressure: 1,794 bar, injection weight: 2,890 g, mold height (min.): 400 mm, ejector force: 182,000 N, ejector stroke: 280 mm, opening stroke: 1,000 mm, plate length: 2,020 mm, plate width: 1,440 mm, plate height: 1,440 mm, total length: 11,200 mm, total width: 2,400 mm, total height: 3,300 mm, overall weight: 35,000 kg, heating capacity: 39 kW (53.03 HP), pressure: 178 bar, number of injections: 1, pump power: 116,000 W, power: 163 kW (221.62 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 312 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition. It has been well maintained. The machine processes only ABS, PP, and PS. The machine is controlled by a Beckhoff system. The machine is equipped with a variety of additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 8 tool heating zones, a water manifold with 8 zones, a screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Water blocks are also included for both the moving and stationary tables, each with 8 connections. In addition, a number of spare parts are included, such as a complete torpedo, a screw, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter, a torpedo wrench, and auxiliary ejector rods. The machine is sold without the robot shown in the pictures. Lhjdpfxoznlhms Amtoi

Condition: good (used), Year of construction: 2007, CPU boards for injection molding machines Arburg Multronica Boards manufactured approx. 2007 Lhedezl Tv Tepfx Amtei Available: 3 units

Condition: good (used), Year of construction: 2009, Arburg parts Ledpezl Tcyjfx Amtshi Year of manufacture approx. 2009

Condition: used, Year of construction: 2012, machine/vehicle number: 220790, This ARBURG Allrounder 1500T 2000-400 injection molding machine will be auctioned online as part of our industrial auction/machine auction due to the closure of the J&S GmbH Automotive Technology site. You can find this and many other items on our platform. Lhedjzk Hkzopfx Amtoi

Condition: used, Year of construction: 2017, operating hours: 38,672 h, machine/vehicle number: 214631, overall weight: 1,200 kg, This ENGEL Insert 500V/160 rotary vertical injection molding machine will be auctioned off online as part of our industrial auction/machine auction, location closure of J&S GmbH Automotive Technology - injection molding machines. You can find this and many other items on our platform. Year of manufacture: 2017 Serial number: 214631 Weight: 1,200 kg Operating hours: 38,672 hours (as of 02/2025, continued operation until 12/2025) with rotary platen with 2 x Single STL 1-12-30 TKN6, year of manufacture 2012/2013 with Piovan C5, year of manufacture 2017 Lodpfezk Hg Nox Amtehi with Piovan THW9 temperature control unit with Piovan MDP, year of manufacture 2013 with Universal Robots UR10e handling robot Functionality and technical data have not been verified without additional items/without additional accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND ATTENDING THE INSPECTION! Subject to reservation This lot will be auctioned off subject to reservation. After the auction closes, the seller will notify within 2 weeks whether or not the highest bid will be accepted. We will inform you promptly.

Condition: excellent (used), Year of construction: 2019, operating hours: 18,800 h, functionality: fully functional, machine/vehicle number: AAKJ4001, clamping force: 12,000 kN, screw diameter: 110 mm, clearance between the columns: 1,250 mm, column diameter: 220 mm, displacement volume: 5,701 cm³, injection pressure: 1,700 bar, injection weight: 5,244 g, mold height (min.): 500 mm, ejector force: 350,000 N, ejector stroke: 350 mm, opening stroke: 1,300 mm, plate length: 2,610 mm, plate width: 1,800 mm, plate height: 1,800 mm, total length: 13,200 mm, total width: 3,400 mm, total height: 3,500 mm, overall weight: 63,000 kg, heating capacity: 55 kW (74.78 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 260 kW (353.50 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 512 A, Equipment: documentation/manual, The machine has been used sparingly and is in very good condition. It has been well-maintained. The machine only processes ABS and PP. The machine’s control system is B&R. The machine is equipped with numerous accessories, including 3 air valves, two hydraulic valves, a servo valve for table movement hydraulics, 22 tool heating zones, a water manifold with 8 zones, screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening, and an electrical cabinet with sockets. The machine also has water blocks on both the moving and stationary tables, each with 8 connections. In addition, several spare parts are included, such as a complete torpedo, a screw nozzle, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter and a torpedo wrench and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not part of this listing, it can be purchased separately and added to the machine later. It was used with the machine and is adapted for it. Lhjdsznbqqspfx Amtsi

Condition: excellent (used), Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: ADKL2001, clamping force: 14,000 kN, screw diameter: 120 mm, clearance between the columns: 1,450 mm, column diameter: 240 mm, displacement volume: 7,351 cm³, injection pressure: 1,200 bar, injection weight: 6,983 g, mold height (min.): 650 mm, ejector force: 350,000 N, ejector stroke: 380 mm, opening stroke: 1,450 mm, plate length: 2,950 mm, plate width: 2,000 mm, plate height: 2,000 mm, total length: 14,100 mm, total width: 3,400 mm, total height: 3,600 mm, overall weight: 75,000 kg, heating capacity: 60 kW (81.58 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 266 kW (361.66 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 520 A, Equipment: documentation/manual, The machine has seen limited use and is in very good condition. It has been well maintained. The machine only processes ABS and PP. It features a Beckhoff control system. The machine is equipped with extensive additional equipment, including 3 pneumatic valves, two hydraulic valves, a servo valve for table movement hydraulics, 32 tool heating zones, a water manifold with 8 zones, a screw heating element insulation, a hydraulic screw rotation system for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Additionally, water blocks are installed on both the moving and stationary tables, each with 8 connections. Furthermore, a set of spare parts is included, such as a complete torpedo, a screw nozzle, heaters, temperature probes, and specific hydraulic seals, as well as a self-filtration filter and a torpedo wrench, and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not the subject of this advertisement, it can be purchased separately and added to the machine. It was used with the machine and is adapted for it. Lhjdpfjzna T Rjx Amtji