Used Automatic Finger Jointing Line for sale (30,357)

Year of construction: 2024, operating hours: 1,452 h, condition: like new (used), functionality: fully functional, 1. PRODUCT RANGE (PROFILE TYPES) The line is equipped with tools and rollers for producing all standard wall and ceiling profiles: • Wall profiles: CW50, CW75, CW100 and UW50, UW75, UW100 • Ceiling profiles: CD60 and UD28 Nljdpfx Aszd Efqsa Iec 2. TECHNICAL SPECIFICATIONS AND PERFORMANCE Production unit (Rollforming Line): • Production speed: * Up to 60 meters/minute (without punching) o Up to 30 meters/minute (with the production of two holes in the profile) • Input material and thickness: Galvanized sheet DX51D+Z (thickness from 0.50 mm to 0.70 mm) • Coil width: Maximum 205 mm • Power consumption and connection: Total power 14 kW (actual consumption approx. 7 kWh), power cable 5x10 • Compressed air requirement: 8 Bar (consumption during operation only 2 l/min, unit capacity 100 l/min) • Layout of the production unit: 15 m (length) x 3 m (width) x 3 m (height) Automatic packing and palletizing unit (Profile Packing System): • Packing speed: 2.5 packs / minute • Length of finished profiles from 2000 mm to 6000 mm • Power consumption of the packing system: Total power 30 kW (actual consumption approx. 12 kWh), 3-phase connection 380 V • Compressed air for packing: 8 Bar (consumption 7 l/min) 3. DETAILED OVERVIEW OF LINE COMPONENTS 1. Uncoiler • Maximum coil width: 205 mm, outer coil diameter up to 1200 mm • Load capacity: up to 2500 kg • Non-motorized system with integrated safety wire mesh fence. 2. Rollforming Machine • Conventional type with roller change (14–15 forming stations) • Shaft diameter: 40 mm | Maximum width between stands: 197 mm • Roller shafts made of hardened and ground steel, supported at both ends. Upper shafts are adjustable according to sheet thickness with a precise Vernier scale. • Rollers made of high-quality alloy steel S 4140, precision machined and heat-treated to a hardness of 55–57 HRC for extremely long service life. 3. Flying Shear Cutting & Punching Unit • Flying shear, mounted on slides and guide rails for translational movement, driven by a servo motor and gearbox. • Knives/blades made of alloy steel for cold working, hardened to 60–62 HRC (exceptionally clean and precise cutting without deformation). • Protected by a safety fence. 4. Automatic Stacking, Strapping and Palletizing System (GHT-SIC-V3) • Automatic profile joining: Connecting system with straps transfers profiles to a group for stacking. Note: Smaller profiles (e.g., UD28), which are not suitable for machine stacking, are simply placed manually on the operator table. • Automatic strapping machine: High-speed brushless motors, speed up to 65 straps per minute, electronic control of tension force (1–35 kg) and control of strap welding temperature (widths 5, 6 or 9 mm). • Automatic electronic palletizer with forks (Mod. 50kg): Fully electronically controlled movement system along all axes via electro-braking drive with inverters (frequency converters), which ensures extremely smooth acceleration/deceleration and gentle handling of packages to prevent material damage. 5. Advanced CNC/PLC control system • Built-in components from recognized global brands. • Industry 4.0 (IND 4.0 PLC) controller with simple input of parameters (product lengths, quantities) via a central terminal. • Stepless (infinite) regulation of production speed and perfect synchronization of all machines in the line. • Built-in safety modules (Emergency stop).

Condition: like new (used), Year of construction: 2016, functionality: fully functional, ANCIMO DRG-45 AUTOMATIC FILLING, CAPPING, AND LABELING LINE (2016) Manufacturer: ANCIMO Model: DRG-45 Year: 2016 Condition: Excellent. Very few operating hours. Complete documentation available. DESCRIPTION Automatic filling line specifically designed for containers with cups and similar formats, equipped with a high-precision volumetric dosing system using 8 pistons adjustable by a micrometer screw. The equipment is in excellent condition, with few operating hours, and is ready for start-up. It is supplied with complete technical documentation, CE marking, and electrical and pneumatic diagrams. TECHNICAL DATA • Dosing capacity: 25 – 250 cc • Filling system: 8 adjustable volumetric pistons • Maximum production: up to 3,600 containers/hour • Micrometer adjustment of volume for quick and precise changes EQUIPMENT INCLUDED • Pressure capping head • GMS SATRL25 cap feeder hopper • GMS SABV3CIR510 AH circular positioning vibrator • GMS SAVR1 linear feeder • GMS SAENF150 container elevator • GMS SABV5CIR900 AH circular positioning vibrator • GMS SAVR2 linear feeder • Cup loading and unloading system • EIDOS PRINTESS P4E05# labeling/printing machine DOCUMENTATION • Original manuals • CE declaration • Electrical diagrams • Pneumatic diagrams APPLICATIONS Suitable for cosmetic, food, chemical, pharmaceutical, and other liquid or semi-liquid products that require precise and repetitive dosing. ADVANTAGES • Complete production line • Very few operating hours • Excellent overall condition • Complete documentation available Njdpfezcfqrex Aa Ielc • Industrial production up to 3,600 containers/hour • Available for inspection

Year of construction: 2020, operating hours: 10 h, condition: like new (used), functionality: fully functional, Automatic line for rinsing, filling, pasteurizing, drying and packaging of glass juice bottles consisting of following modules: 1. SEMI AUTOMATIC DEPALLETIZER (model: Depal 512 – mini) for unpacking glass bottles from pallets, 1 operator required to put the pallet into the machine and remove the cardboard that is inserted in between the glass bottle layers 2. UNIVERSAL RINSING MACHINE (model: IND-Wash 56 S2) for steam sanitizing and hot water rinsing of the bottles before filling 3. ROTARY FILLING MACHINE (model: IND-Dose 46 PO-12) for filling of the hot product into the glass cylinder shape bottles 4. CLOSING MACHINE FOR TWIST OFF CAPS (model: IND-Close 12E) for vacuum closing of the filled bottles using steam injection induced vacuum system Nljdpfx Ajzdr Iloa Ioc 5. PASTEURIZATION AND COOLING TUNEL (model: PT 42-9) for further continuous pasteurization of the product 6. VACUUM TESTING MACHINE (model: IND-Test 61) for selection and eviction of the improperly closed bottles 7. DRYING MACHINE (model: IND-Blow 86) for drying the residual moisture on the battle surface before applying labels 8. LINEAR LABELLING MACHINE FOR APPLICATION OF SELF-ADHESIVE LABELS (model: IND-Lab 32B) with top (over the cap) and side application of the labels on cylindrical bottles 9. AUTOMATIC GROUPING AND SHRINK-WRAPPING MACHINE WITH TRAY AND FILM (model: IND-pack 29 T) for packing the bottles onto cardboard trays in various configurations per different bottle sizes 10. SET OF FLAT TOP CHAIN CONVEYORS (model: IND-Trans 71) connecting the various modules of the line (conveyors between rinsing, filling and closing sections with top covers)

Condition: used, functionality: fully functional, Metering and application system Hydrotop 1 E400R + Ecotac_C for single-component (1K) PUR edge gluing Nledeul Shnjpfx Aa Ijc for package dovetail joint systems Glue application – dovetail joint Adhesive application – dovetail joint in very good condition functionality tested

Year of construction: 2016, condition: good (used), for sale: Nodpfxjx Ari Ho Aa Iolc Complete Niverplast packaging line Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector 4. Reject system 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet sealing device 11. Conveyor systems Niverplast Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Inspection on site is also possible. Dismantling and transport can be offered. Kind regards, Leo Holland

Condition: excellent (used), Year of construction: 2009, operating hours: 3,350 h, functionality: fully functional, total length: 21,000 mm, total width: 1,200 mm, total height: 3,250 mm, type of input current: three-phase, input voltage: 380 V, feed rate X-axis: 12 m/min, working width: 270 mm, We are selling our fully automated packaging line by CSP Engineering due to production expansion and renewal of our machinery park. The packaging line is engineered for maximum output, precision and reliability in industrial production environments. The line is currently functional in production. Main features - Automatic counting system - Automatic label application with package quantity indication - Integrated folder insert system inside each package - Automatic wrapping and strapping system - Integrated measuring system - High production efficiency: up to 150 m2 per hour - Suitable for long profiles Technical specifications - Maximum plank length: 3100mm - Maximum plank width: 270mm - Widest point of the complete line: 3100mm Nljdpfsy Rfftex Aa Iec Machine configuration and power requirements 1. Strapex system - 5.6 AMP 2. Parscan System - 10 AMP 3. Packaging Machine - 6 AMP 4. Oven - 40 AMP 5. Destacker - 25 AMP The line can be inspected in operation and is immediately available upon agreement. Keywords: Labeling, Destacking, Stacking, Strapping, Packaging, Packing, Parquet, Wood, Wrapping, Folder, Shrinking, Shrinkoven

Year of construction: 2006, condition: used, functionality: fully functional, We present an Automatic drawer slide insertion line of 3 machines and robot (currently in production): BLA - B41, manufactured 2006/2007 (Sweden) BLA - B28, manufactured 2006 (Sweden) Screwdriver 3RL, manufactured 2018 (Lithuania) Robot TECHNICAL SPECIFICATIONS Nledpfxoy T Nfio Aa Iec Inserting of Drawer Slides Fitting machine BLA-B41 – pos. 1 Fitting machine in pass-through outfit, equipped with positioning stop, designed for automatic screwing of drawer slides. The fitting machine is designed for following sizes of material: Deep: 300–600 mm, servocontrolled adjustment Height: 400–1500 mm, servocontrolled adjustment Thickness: 16 mm Dimensions Machine length: 4100 mm Pass-through height: 900 mm Screwdriver equipment Screwdriver beams, 2 units, each equipped with 2 screwdrivers and corresponding screw feeders for Ø6.3x13 screws. A suiting screw is the type 84 FSX Magazine units 2 magazine units designed for left drawer slide 2 magazine units designed for right drawer slide · Each magazine contains approximately 40 drawer slides. · The length of the slides are 450 mm and the width 21.5 mm. Buffer conveyor TPB – pos. 2 Driven roller conveyor Total length: 2150 mm Other specifications are the same as for pos. 3 above. Buffer conveyor TPB – pos. 3 Driven roller conveyor Total length: 2450 mm Roll length: 600 mm (620 mm inside conveyor frame) Roll pitch: 150 mm Roll type: Ø50 mm steel, coated with thermoplastic rubber Speed: 0.78 m/sec. at 50 Hz (frequency controlled) Height: 900 mm Returning Conveyor System TPT-US – pos. 4 Sideway section with four belts Speed: 0.5 m/sec. at 50 Hz (frequency controlled) Driven roller conveyor Total length: 8900 mm Roll length: 600 mm (620 mm inside conveyor frame) Roll pitch: 150 mm Roll type: Ø50 mm steel, coated with thermoplastic rubber Speed: 0.50 m/sec. at 50 Hz Height: 900 mm Additional specifications Sound pressure level Lower than 70 dB(A) Connection facts electrical With reference to the electrical drawings Connection facts pneumatic 0.63 MPa (6.3 bar), ½”

Year of construction: 2019, condition: like new (used), functionality: fully functional, For sale: SCHTEC WM740 four-head automatic welding machine, rarely used and in like-new condition, including WM620 corner cleaning automaton, cooling station, and automatic turning arm. If purchased together with the SMC350 machining center and Pressta two-head automatic screwing unit, which are also listed in your advertisements, the package price is EUR 180,000. Nedpfx Aaoyzimce Ijlc For further information, please feel free to contact me.

Condition: new, mileage: 18 km, fuel type: diesel, gearing type: automatic, first registration: 04/2026, emission class: euro6, color: other, brakes: retarder, number of seats: 24, Year of construction: 2026, Equipment: ABS, air conditioning, = Additional Options and Accessories = - Air conditioning (driver) - Air conditioning - USB ports = Additional Information = Height: 100 cm Damage: None Nlodpey Edwdsfx Aa Iec = Company Information = We are an international company based in Belgium, located near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for buying and selling used buses and features a spacious parking area serving as a display site. We always have numerous buses of all makes, capacities, models, and at every price level in stock. We can find you the right coach, school bus, or city bus tailored to your needs and budget. All information provided without guarantee. Errors, prior sale, and typographical mistakes excepted. Viewing hours for used buses: Mon-Fri: 8:30 am - 12:00 pm, 12:30 pm - 5:00 pm. Mówimy po polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: new, Year of construction: 2026, machine/vehicle number: 2022-04, -wood entrance 300 - 3000 mm -cutting height max. 250 mm -wood rests and tools drive -Performance wood thickness 25 mm = 72 parts / min -Performance wood thickness 35 mm = 51 parts / min Njdpfx Aascbyqfe Iolc Finger jointing machine and lines are a masterpiece of the woodworking industry >simply the best fingerjoint system> Delivery time approximately 10 months The manufacturer and supplier MINDA industrial plants

Condition: like new (used), Handling equipment for a finger jointing line. Njdsd Duz Eopfx Aa Ijlc Roller conveyors, wide- and narrow belt conveyors, a trim saw conveyor, trim saws, etc. See pictures. With documentation. Good condition, made by Martek in Finland.

Condition: good (used), Year of construction: 1990, I sell the combined tenonging machine with drilling head BALESTRINI I2F 1 tilting table with pneumatic material pressure. Njdpfx Aaehw Dfnj Iolc Automatic cutting saw from bottom. Tenoning milling head able to do the finger-joint as well. Drilling head for dowel holes production 3 spindles. Revolving 360° enabling any position. Feeding automatic. Positioning on end-sensors. Available immediately.

Condition: used, Fully automatic RATTUNDE line ACS100/2 integrating: · cutting, Nodpsyz Rvxofx Aa Ielc · brush deburring, · facing / chamfering, · 100% length control, · automatic robotic packing with double output system · and very large set of tooling. Designed for high-precision single or double cuts. One of the fastest tube cutting machine on the market. TECHNICAL DATA Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25* - 2.000 mm (*25 - 150 mm with special tooling) Performance: Up to 1.500 pieces/hour SCOPE OF SUPPLY 1. BM 8 bundle loading magazine in light construction 2. ACS 100/2 Cutting production system with piece counter 3. Brush deburring machine BDM 4. Chamfering machine CFM 5. Length measuring device Pi 6. Automatic stacking robot SRT 7. Safety fence with light barrier to secure the BM bundle loading magazine 8. Step conveyor SCB for the transport of pieces 9. Conveyor for test tubes 10. Complete set of tooling 11. Switch cabinet & control system for the complete line Performance: Up to 1.500 pieces/hour Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25 - 2.000 mm (25 - 150 mm with special tooling) Thickness: From 0,5 mm to solid

Condition: used, Automatic frying line HOJA DRL1000 Technical specifications: Nsdpjxay I Sjfx Aa Iolc - Frying time: 40–345 sec, - Maximum frying temperature: 240°C / 460°F, - Machine dimensions (L × W × H): 2000 × 2600 × 2200 mm, - Total weight: approx. 750 kg, - Outer pan diameter: approx. 1 m, - Usable frying width: approx. 285 mm (11.22″), - Shallow frying with oil level up to 5 mm (0.2″), - Cast iron, flat pan; flatness deviation not greater than ±0.1% of the diameter, - Frying time: from approx. 40 to 345 s, - Maximum heating power: approx. 28 kW, - 2 temperature sensors per pan. Included: exhaust hood, dispenser, spray system, oil filter.

Condition: used, Working width from to ~ 45 - 95 mm Working height from to tba mm 3.000 mm milling height 130 mm Njdpfjy Dh Siox Aa Ijlc Semi-automatic finger jointing line Sauter type RS for joining wooden workpieces by means of finger joints. The system is suitable for waste wood processing and for the production of extended solid wood lamellas. Including dismantling and loading. Fixed loading date: 15.06.2026. Consisting of: - Milling and gluing machine Sauter type RS-FPEL 130 - Press Sauter type RS-DKPV 6 - End length saw Sauter DAS 500

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. Nodpfsth Taaox Aa Ijlc 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Inspection is very welcome.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications Njdpfx Aey Alcioa Ijlc • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: used, machine/vehicle number: LC618, Used Automatic 18.9L bottling line 500 BPHTechnical Specifications & Performance DataThis automatic bottling line is engineered specifically for large 18.9L bottles, delivering dependable performance for washing, disinfecting, filling, and capping. Designed as a complete, synchronized system, it provides consistent throughput and accurate operations across all stages.Production speed: 500 bottles per hourTotal output: 9450 liters per hourBottle format: 18.9LProcess stations: Washing, disinfecting, filling, cappingFilling heads: 6Operation: Fully automatic lineApplication: Ideal for high-volume, large-format bottle handlingAdvanced Automation & Control SystemsThe line operates with automated sequencing across each station to maintain stable throughput and reduce operator intervention. Controls support straightforward start/stop and changeover procedures to keep change times minimal and maximize uptime.Automatic cycle control for synchronized washing, disinfecting, filling, and cappingCentralized operator interface for status monitoring and adjustmentsSensors and interlocks to help ensure reliable bottle handling and cycle completionQuick setup for 18.9L format with consistent, repeatable settingsProduction Line Integration CapabilitiesThe system is designed to function as a complete line for 18.9L bottles and can be integrated with upstream and downstream handling equipment. Its layout supports straightforward connection to conveyors, accumulation, and packaging stations where required.Inline operation as a complete bottling unit for large-format containersCompatible with standard conveyor interfaces for infeed and dischargeOptimized handling for 18.9L bottles with stable transfer between stationsSuitable for beverage production where large bottles are requiredMachine Condition & Maintenance HistoryThe line has been barely used, limited to trial run operation only. It is fully functional, ready for testing, and in production-ready mode. This minimal use profile provides a strong opportunity for those seeking a second hand, used bottling line with near-new wear characteristics.Condition: Barely used (trial run only)Status: Fully functional and ready for testingOperational readiness: Production-ready configurationOperational Performance & VersatilityPurpose-built for 18.9L bottles, the system provides reliable cycle execution and steady output. The six-head filling section balances throughput with filling control appropriate for large volumes. Pre-filling treatment via washing and disinfecting helps support product quality within beverage production and industrial packaging workflows.Consistent performance for large-format bottle fillingIntegrated pre-treatment (wash and disinfect) prior to fillingAutomated capping aligned with 18.9L bottle handlingSuitable for beverage production environments requiring large containers Nljdpfoy Ai Hfjx Aa Ijc

Condition: excellent (used), Through-feed Drilling ELECTRONIC LINE (3 machines), CNC controlled, J06031) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 ea) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top pressing devices + No. 2 endless screws to evacuate the wastes. J06032) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) Nsdpfxsg Urn Ee Aa Ielc - No. 6 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 Top pressing devices + No. 2 endless screws to evacuate the wastes. J06033) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 4 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 4 Top pressing devices + No. 2 endless screws to evacuate the wastes. With CNC (software Tooling System + Woodmaster) The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Loader (Bridge Frame) "RBO" Double Station, Mod. Advantage C B) Motorized Roller table "RBO" with turning device 90° (length to crosswise) C) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 Centre A: No. 2 Electro-spindles ISO 30 (Kw 3,7 each) with tool-holder magazine with 3 places each. Nljdpfx Aaogvdkgj Ioc Centre B: No. 2 predispositions for the installation of other 2 electro-spindles No. 2 tool-holder magazines (revolver) with 56 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) D) Connection transfer, with upsidedown turning machine (180°) "RBO" Mod. Ribaltatore E) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units(1 left+1 right)with 4 BH18 heads with 18 spindles(36 right + 36 left),total 72 Centre A: No. 2 Electro-spindles ISO 30 (Kw 4,5 each) with 3 tool-holder magazine each. Centre B: No. 2 predispositions to install another 2 electro-spindles No. 2 tool-holder magazines (chain) with 60 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit No.2 horizontal units(1 right+1 left)with 5 insertion nozzles each (5 left + 5 right), tot. 10 nozzles G) Stacker (Bridge Frame) "RBO" Double Station, Mod. Advantage SC

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) Nlsdpfx Aaod Nviqe Ijc - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Condition: excellent (used), Automatic through-feed ELECTRONIC Drilling LINE (CNC controlled): W05022F) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - N° 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - N° 6 bottom vertical units (each with 2 drilling heads at various spindles, HP 1.8 each) - N° 3 top vertical units (each with 2 drilling heads at various spindles, HP 1.8 each) - N° 5 top pressing devices + N° 2 endless screws to evacuate the wastes. With CNC NC 500 (Software Tooling System + Woodmaster) W05022G) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC Nlodpfx Aaet Ig A Ss Iec - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 6 bottom vertical units (each with 2 drilling heads at various spindles, HP 1.8 each) - No. 3 top vertical units (each with 2 drilling heads at various spindles, HP 1.8 each) - No. 5 top pressing devices + N° 2 endless screws to evacuate the wastes. 2nd Drilling Machine connected to the NC of the 1st Machine

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Motorized Roller table "RBO" with 90° conveyoring belts B) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) C) Connection system, with up-side-down turning machine (180°) "RBO" Mod. Ribaltatore Nodpfoyhqa Aox Aa Ijlc D) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units (1 left+1 right) with 4x BH18 heads with 18 spindles each (36 right + 36 left) total 72 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) E) "BIESSE" RD dowels insertion machine No.2 horizontal units (1 right+1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles F) Brush-cleaning machine "WANDRES"

Condition: excellent (used), Flexible N.C. line for drilling, routing and "hardware" insertion. Numerical Control "TPA" Albatros. Composed by: 1) Hedgehog loader, with 12 positions (for 12 panels), vertical panel introduction. 2) CNC Drilling and routering machine Mod. Over 25.13 with inserter (for bushes, shelf support and base). - N. 1 operating head (estimated KW 5,5) with tool storing revolver (10 positions) - N. 1 boring head with 24 independent spindles (X axis) - N. 1 boring head with 2 independent spindles (Y axis) - N. 1 boring head with 5 independent spindles (Z axis) - N. 1 insertion unit (bushing screwing) - N. 1 insertion unit (shelf support pressure) Nedpfx Ashvagkja Islc - N. 1 storage and feeding tank 3) Unloader (90° side-deplacement), with motorized conveyor for vertical outfeed of the panel. 4) Unloader - tilting (0°-90) moves the panel from vertical to horizontal, with motorized conveyor

Condition: excellent (used), AUTOMATIC Drilling and Dowels inserting LINE (2 machines): W12054A) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 5 bottom vertical units (each with 2 swivelling drilling heads at various spindles, HP 2.3 ea) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 5 top pressing devices - No. 2 endless screws to evacuate the wastes. With NC (software Modul Tooling System) to control, manage and run the 2 machines of this line W12054B) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 8 inserting nozzles, such as Glue injectors and dowel drivers) Nljdpfsvnq Txjx Aa Isc - No. 3 bottom units (each with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 3 Top pressing devices - No. 2 endless screws to evacuate the wastes.