Used Beck Be-Mi / Be-200/80/500 for sale (49,489)

Condition: new, Rexroth SE-B2.020-060.00.000 Brushless Permanent Magnet Motor with Heidenhain ERN 221.2123-500 Encoder ID No. 270 675 02, Serial No. as per photo, Hole spacing of mounting holes: 81 x 81 mm, Ø drive shaft: 14 mm, unused, 100% functional Fjdji D Nthjpfx Ad Nepg

Condition: ready for operation (used), Fanuc A06B-6078-H202#500 spindle amplifier module, serial number as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as shown in the photos. Fpodex Eq Ucspfx Ad Nog

Condition: ready for operation (used), Fanuc A06B-6088-H222 # 500 Spindle Amplifier Module SN:EA6Z06085, professionally fully overhauled and tested with a 12-month warranty. The agreed dealer commissions do not apply to this item. 100% functional, scope of delivery as shown in the photos. Fpedpfxex Dwndj Ad Nsg

Condition: ready for operation (used), Stöber K21R 80 K4 TLB 960 geared motor with C403Q1350D gearbox SN: 1926741, used, in good condition, 100% operational, delivery as shown in the photos Fsdpjx Dwc Isfx Ad Nspg

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Fsdpfx Adewcgr Ee Nepg Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Condition: as good as new (ex-display), Year of construction: 2024, - Mobile scissor lift table with single scissors Fsdpefhbv Tofx Ad Njpg - with smooth sheet metal plate and push handle - Operation for the up / down stroke takes place via a hydraulic foot pump - load capacity 500 kg - Construction height 400 mm - Useful stroke 540 mm - Maximum height 940 mm - Platform size 1100 mm x 700 mm - Dead weight 148 kg - 2 swivel castors with brakes, 2 fixed castors without brakes - Wheel Ø 150 mm - Powder coating lacquer floor frame and platform frame light gray RAL 7035, scissors in violet blue RAL 5000

Condition: used, Year of construction: 2024, operating hours: 245 h, fuel type: diesel, power: 85 kW (115.57 HP), motor manufacturer: Deutz, Lifting capacity: 8.000 kg Rental currency: EUR Please contact KEY-TEC Sales for more information Fpjdpfjy Rw Rnjx Ad Nog

Condition: used, Year of construction: 2024, operating hours: 245 h, fuel type: diesel, power: 85 kW (115.57 HP), motor manufacturer: Deutz, Lifting capacity: 8.000 kg Rental currency: EUR Please contact KEY-TEC Sales for more information Fjdpfx Aowl T Tbjd Njpg

Condition: new, The double-sided cantilever rack by BLT, with a height of 315 cm, is ideally suited for storing medium-weight long goods such as profiles, pipes, and bars in warehouses, workshops, or craft businesses. With an approximate rack length of 5.12 m, a usable depth of around 80 cm, and a total of 5 levels per side including the base level, this cantilever rack offers clearly arranged and easily accessible storage space for long and bulky items on both sides. Each cantilever arm can support up to 500 kg, and each upright can handle up to 1,800 kg per side. The bolt-on cantilever arms with deflectors ensure robust and practical use in day-to-day operations. Made in Germany. Freight within Germany already included, plus VAT. Fsdpfx Adey Rkg As Nepg Product details: - Rack type: Double-sided cantilever rack - Height: approx. 315 cm - Length: approx. 5.12 m - Total depth: approx. 174 cm - Bay width: approx. 128 cm - Cantilever arms: approx. 80 cm usable length (IPE80) - Usable depth of base level: approx. 80 cm - Load per arm: max. 500 kg (with even load distribution) - Load per upright: max. 1,800 kg per side (without base level, with even load distribution) - Levels per side: base + 4 storage levels (5 levels per side total) - Design: Double-sided, bolt-on cantilever arms with deflectors - Upright profile: IPE140 - Cantilever arm profile: IPE80 - Colour finish: RAL 7016 - Manufacturing: Made in Germany - Delivery: Freight within Germany included, plus VAT Scope of delivery: - 5 × uprights made from IPE140, height approx. 3,150 mm - 40 × cantilever arms, approx. 80 cm length, made from IPE80 - Including mounting hardware - Including heavy-duty anchors for floor fixing Advantages of the BLT cantilever rack: - Ideal for storing medium-weight profiles, pipes, and bars - Double-sided design for storage space accessible from both sides - Bolt-on cantilever arms with deflectors - 5 levels per side, including base, for optimal use of storage space - Up to 500 kg load capacity per arm and up to 1,800 kg per upright per side - Secure floor anchoring with supplied heavy-duty anchors - Made in Germany - Freight within Germany included Delivery: - Freight within Germany included - Delivery includes mounting hardware - Secure floor anchoring with supplied heavy-duty anchors Enquiries & custom planning: Take advantage of our personal consultation for your individual storage solution. Inform us of your required dimensions, stored goods, and available space. Our experienced consultants are happy to provide you with a non-binding offer featuring custom planning and structural calculation for your bespoke cantilever racking system. Use our enquiry list or contact us directly by phone. Together, we will plan your tailor-made racking system.

Condition: excellent (used), mileage: 177,033 km, power: 120 kW (163.15 HP), first registration: 10/2016, fuel type: diesel, tire size: 195/75R16, wheelbase: 3,670 mm, fuel: diesel, fuel tank capacity: 85 l, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: other, total length: 13,600 mm, total width: 2,300 mm, permissible axle load (axle 1): 2,000 kg, permissible axle load (axle 2): 3,500 kg, permissible axle load (axle 3): 1,800 kg, loading space length: 10,000 mm, loading space width: 2,300 mm, Year of construction: 2016, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electric window regulation, power assisted steering, power mirror, soot filter, traction control, General information Number of doors: 2 Cab: single Registration number: 010308 Technical information Number of cylinders: 4 Engine capacity: 1.968 cc Axle configuration Front axle: Tyre size: 195/75R16; Max. axle load: 2000 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70%; Brakes: disc brakes Rear axle 1: Tyre size: 195/75R16; Max. axle load: 3500 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50%; Brakes: disc brakes Rear axle 2: Tyre size: 195/50R13; Max. axle load: 1800 kg; Tyre profile left: 100%; Tyre profile right: 100%; Brakes: drum brakes Rear axle 3: Tyre size: 195/50R13; Max. axle load: 1800 kg; Tyre profile left: 100%; Tyre profile right: 100%; Brakes: drum brakes Rear axle 4: Tyre size: 195/50R13; Max. axle load: 1800 kg; Tyre profile left: 100%; Tyre profile right: 100%; Brakes: drum brakes Weights Empty weight: 1.890 kg Carrying capacity: 4.920 kg GVW: 3.500 kg Max. towing weight: 6.400 kg (unbraked 750 kg) Functional Make of bodywork: VW Condition Technical condition: very good Visual appearance: very good Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Air suspension - Climate control - Heated door mirrors - Lane assist - Leaf spring suspension - Particulate filter - Spare wheel - Speed limiter - Tachograph - Toolbox - Twin wheel axle = Remarks = Fpedpfswu Dqiex Ad Nsg Video working vehicle: Neat Volkswagen Crafter 2.0TDI BE Combi Semi-trailer: AWB BE Knikker Rack trailer/car transporter with articulated system Husky Superwinch with radio control Air springs adjustable in height at the rear GVW 3500 KG (BE driving license) Total train weight: 8750 KG Load capacity: 4920 KG Length of loading platform: 10 m Width: 2.30 m 177,000 KM demonstrable

Year of construction: 2014, operating hours: 44,309 h, condition: ready for operation (used), overall weight: 18,000 kg, total width: 9,600 mm, total height: 7,650 mm, product length (max.): 15,000 mm, Thermoforming machine manufactured in 2014. This FRIMO FTL 80/200 Fullflex has a total of 1,260,207 cycles and a machine weight of 18,000 kg. It features dimensions of 15,000 x 9,600 x 7,650 mm and operates at a connected load of 172 kVA. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO FTL 80/200 Fullflex machine we have for sale. Contact us for further details. • Total cycles: 1,260,207 Fsdpfoy Rpdtex Ad Nspg • Operating voltage: 3 / N / PE AC 400 / 230 V • Frequency: 50 Hz • Control voltage: AC 120 V / DC 24 V • Valve voltage: DC 24 V • Connected load: 172 kVA • Nominal current: L1: 279 A, L2: 275 A, L3: 261 A • Compressed air class: 4 • Pneumatic connection: G 1/2" • Air consumption: 150 l/cycle • Operating pressure: 6 bar • Cooling water inlet: G 1" • Cooling water max pressure: 3 bar • Cooling water max temp: 90° C • Lubrication interval: 800 cycles

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 1650 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1250 mm die cushion capacity 80 t die cushion stroke 300 mm die cushion area 1300 x 900 mm table height over floor 800 mm ram surface 1600 x 1250 mm Fedpfx Ajxwdrvsd Nopg oil volume 2000 l power capacity 43,0 kW weight 25,0 t Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m height beneath floor 0,85 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Sepro Robotique | Success 7 | 2016 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, company RAU Maschinenbau 1x Hot Runner Controller 1x Conveyor Belt, company SAS Grillet 1x Conveyor Unit, company Motan Technical Details: Machine size: 500/370-200 Power supply: 3/N/PE AC 400 V Frequency (Hz): 50 Current (A): 94 Weight (t): 3.3 Pressure (bar): 210 Fpedpjy N R U Rjfx Ad Neg Flow rate (l/min): 130

Condition: excellent (used), CTS Temperature Shock Test Chamber Type: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Version: air-cooled Fpjdpey I Ntcofx Ad Nog For sale is a CTS temperature shock test chamber designed for thermal cycling and shock testing in industrial, research, and development settings. Technical Specifications: Test chamber volume: approx. 32 liters Max. test specimen weight: approx. 10 kg Temperature ranges: Hot chamber: +50 °C to +200 °C Cold chamber: -80 °C to +100 °C Performance data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Temperature change rate: up to approx. 100 K/min Transfer time: < 10 seconds Temperature deviation: ±1 K / ±2 K Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.7 kW Rated current: approx. 15.4 A Fuse: 16 A slow-blow Protection rating: IP 22 Refrigerants: R404A: 2.3 kg R23: 0.90 kg Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: approx. 650 kg Additional data: Sound pressure level: < 58 dB(A) Compressed air connection: 1/4" external thread Equipment: Two-chamber system (hot/cold chamber) Digital CTS controller Display / control panel Program mode Operating hours counter Observation window Interior lighting Temperature limiter Specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram available Piping diagram available Quick guide available Safety data sheets available Note: The table shown in the photos is not included in the sale. Condition: Used Visual condition as seen in the pictures Scope of delivery as pictured Inspection by appointment possible. Loading can be arranged. Commercial sale. Sold without warranty. (Subject to change and error)

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box, pressing tool, clamping support, square profile, shim profile, square block -Square block: with through holes -Bore: Ø 78 mm -Number: 4x profile available -Price: per piece -Dimensions: 300/200/80 mm Fsdoy Iw Saspfx Ad Nepg -Weight: 27.9 kg/pc.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh Fpsdpfx Adjy Hkfde Nsg For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) Fpedpfxoy Hkd He Ad Njg - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 1 h, load capacity: 8,000 kg, lifting height: 5,070 mm, free lift: 1,615 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, power: 81 kW (110.13 HP), fork carriage width: 2,200 mm, fork length: 1,200 mm, empty load weight: 12,169 kg, total length: 3,970 mm, drive type: Diesel, construction width: 2,200 mm, Diesel Forklift Load center: 600 mm Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Fjdpfxjy Hm Dco Ad Nepg Transmission: Torque converter Condition: New machine Technical condition: New Front tire type: Superelastic Rear tire type: Superelastic Description: - 2.9-liter HMC D4CC diesel engine, 81 kW, EU Stage V - Common Rail incl. DOC, SCR, and DPF - Kessler front axle - ZF transmission - Engine power selector - Reduced noise level in the cabin - Multifunctional digital display - Air conditioning with multiple air vents - Improved visibility thanks to one-piece curved windshield - Automatic parking brake: OPSS system - Speed limiter - Slope indicator - Easy maintenance access - Tiltable cabin with heating and A/C - Engine self-diagnosis and consumables management - Automatic particulate filter and SCR regeneration - Grammer seat with belt, contact switch, and armrest 3rd valve, 4th valve, rear work lights, front work lights, heater, load guard, particulate filter, full cabin, air conditioning, full free lift, CE certificate, twin tires, interior mirror, exterior mirrors, windshield wiper, single pedal, LED, seat,

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The versatile all-rounder combines outstanding workmanship with a broad range of applications. Our machine also offers intuitive operation, optimizing your packaging processes. A high-quality unwind unit with double automatic roll centering ensures precise material guidance. Furthermore, our active material feed system guarantees optimal web tension for flawless packaging results. The highly efficient brushless motors and user-friendly color touchscreen control system provide maximum flexibility during format changes, significantly simplifying your packaging operations. The machine is equipped with memory storage for machine parameter settings and can save up to 50 different products. For this packaging line, we also offer fully and semi-automatic feeding solutions, which can be retrofitted upon request. The machine is available with either left- or right-hand operation and features a rotary cross-sealing unit with an electronic overload protection switch for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. If you are looking to optimize your packaging processes with high production capacity and superior quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt 2.6 meters in length (other lengths available on request) 2. Adjustable bag former Fsdpswld Upsfx Ad Nspg 3. Single film loader + automatic film centering device 4. Rotary end sealing, single sealing jaw 5. Robust central fin seal structure 6. Four servo drive controls - Active material feed shaft - Central sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Programmable bag length or fully automatic product length detection 13. Standard direction: left to right Technical Parameters 1. Product length: L120–500 mm 2. Product width: W30–200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The all-rounder combines outstanding build quality with a wide range of applications. Our machine also offers intuitive operation to optimize your packaging processes. A high-quality material unwinder with dual automatic roll centering ensures precise material guidance. Furthermore, our active material advance unit guarantees optimal web tension for flawless packaging results. The highly powerful brushless motors and user-friendly color touchscreen control system give you maximum flexibility during format changes and greatly simplify your packaging operations. The machine features memory slots for storing machine parameters—up to 50 different products can be saved. For this packaging line, we also offer fully and semi-automatic infeed systems, which can be retrofitted at your request. The machine is available in both directions of operation and features rotary cross-sealing with an electronic overload protection switch for maximum safety. Thanks to its powerful performance, versatility, and technological sophistication, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift articles. If you wish to optimize your packaging processes with strong production performance and high quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt, 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Robust, central fin seal structure 6. Four servo-driven systems: - Active material advance shaft - Center sealing - End sealing - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers Fpsdpewld Tfjfx Ad Nog 9. 304 stainless steel housing 10. Documentation in the local language 11. Register mark control 12. Bag length programmable or with fully automatic product length detection 13. Standard operation from left to right Technical specifications: 1. Product length: L40–600 mm 2. Product width: W30-200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 80 products/min 5. Maximum film width: 600 mm 6. Power supply: 1Ph. 220V 50Hz 7. Total power: approx. 4.7 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4300 x 1190 x 1210 mm

Condition: excellent (used), Year of construction: 2012, Engel e-victory 200/80 with Engel Viper 12 Robot / Electric Machine / Operating hours: approx. h in automatic mode Year of manufacture: 2012 Injection Unit: Screw diameter: 30 mm Shot weight: approx. 71 g Injection pressure: 2400 bar Dosage volume: 85 ccm Clamping Unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Platen size: 670x600 mm Ejector: electric Clamping unit: hydraulic Control system: CC 200 – touchscreen Additional equipment: Production line with Engel Viper 12 Machine is in very good technical condition Electric machine: energy-efficient and very quiet Operating hours: approx. in automatic mode Air valve x 4 Hydraulic core pull x 1 Controller with 12 hot runner zones Injection unit is wear-resistant and corrosion-resistant Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Kistler sensor – mold pressure regulation Parallel movements Engel Viper 12 Robot Fpodpfx Adoy Dp Iro Nog Year of manufacture: 2012 5-axis robot: 3 axes driven by servomotors (electric): X, Y, Z; B-axis pneumatic and C-axis Touch control panel Robot safety package Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor at extra charge Dimensions: Weight: 5500 kg Length/Width/Height: 4.40x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Engel Victory 500/80 Tech / Production Line with Engel Viper 12 Robot Year of manufacture: 2011 Injection Unit: Screw diameter: 45 mm Shot weight: approx. 295 g Injection pressure: 1,598 bar Dosage volume: 318 cc Clamping Unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Platen size: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - touchscreen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface 3x hydraulic core pull Injection unit hardened - bimetallic Robot Engel Viper 12 Year of manufacture: 2014 5-axis robot: 4 axes driven by servo motors (electric); Axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Robot available for purchase at additional cost Dimensions: Weight: 5,300 kg Length/Width/Height: 4.57x1.48x2.38 m Fpjdpfxoy Dp Ils Ad Nsg Drive: Pump/motor: 15 kW All offered machines are started up and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2006, operating hours: 69,000 h, functionality: fully functional, machine/vehicle number: 163769, Here we offer a permanent maintained injection molding machine. from the following machine we have other machines of the same type and same year in stock also with Geiger Robot Fpjdpfxsm Nclvj Ad Neg Manufacturer Engel Type Victory 200/80 Tech year of construction: 2006 Control system: CC 200 Extras -installed Languages: German Englisch -25 mm (wear and corrosion protected) - control CC200 - enlarged clamping plates (B plates) - minimum installation height 250 mm - maximum platen distance 700 mm - quality switch / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs - handling interface Euromap 12 - Host computer interface Engel EMS - Geiger EA Mini 2001 SLI (#156686 0504 4417 / year 2005) - without material hopper or conveyor Clamping unit clamping force: 80 to./ 800 kN tie bar dimension: tie bar-less clamping platens: 730 x 600 (hxv) platen distance: 700 mm max installation height: 250 mm min. opening stroke: 450 mm Injection unit screw diameter 25 mm stroke volume: 69 ccm injection pressure: 2090 bar / 2400 increased Weight: 5,200 kg. dimensions: 4,00 mtr. x 1,40 mtr. x 2,00 mtr LxWxH from our warehouse Hannover /Germany free loading on truck of the buyer or free delivery against freight reimbursement Viewing under electric power possible functional guarantee

Condition: used, Year of construction: 1998, functionality: fully functional, Description: Mazak CNC lathe with chip conveyor Type: Mazak SQT 200 Control: MAZATROL PC FUSION 640T Year of manufacture: 1998 Machine number: 320140264 Bar feeder: KSF 60/S4 included in price Chuck: no longer available Chip conveyor: chip conveyor present X-axis: 190 mm Z-axis: 535 mm Turning length: 538 mm Max. turning diameter: 350 mm Max. turning diameter through loader: 70 mm Max. swing diameter: 525 mm Spindle speed range: 35–5,000 rpm Number of tool stations: 12 Operating/spindle hours: single-shift operation with 80% utilization Voltage: 400/230 V 50 Hz Control voltage: 230 V/24 V Fedpfx Aeyrrctod Nspg Bar loader: IEMCA TAL/AUTO 65/32 Serial number: 020417GA05 Max. bar length: 3,200 mm Min. bar length: 400 mm Max. bar diameter: 32 mm Min. bar diameter: 5 mm Bar loader weight: 850 kg Overall height: approx. 2,000 mm Overall length: approx. 4,000 mm / 5,700 mm Overall width: approx. 1,800 mm Total weight: approx. 5,000 kg Location: Germany, 72622 Nürtingen near Stuttgart Delivery: Short-term possible by arrangement Freight terms: Ex works General condition: Used, very good, fully functional. From the user, first-hand, not a dealer, professionally maintained and serviced The machine can be inspected under power. All technical details are provided without guarantee.

Year of construction: 2021, operating hours: 7,990 h, condition: used, machine/vehicle number: 318657, Power: 42.55 kVA, weight: 5,600 kg, 16-position tool changer, driven tools, Y-axis, chip conveyor, 1 tool cabinet with 7 drawers, with accessories, 1 pallet with tools, 1 lot of clamping jaws, !!!Collection: 08+09 June 2026!!! Fsdpfsyztf Aex Ad Njpg