Used Behringer Hbm440A for sale (89)

Condition: used, Automatic band saw, used but technically in good condition. Maximum capacity: Ø 260 mm Bljdjw N Iw Ijpfx Aqwel

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw Bedpfxevdk A Eo Aqwsll TECHNICAL DATA Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Band saw, Behringer Band saw, Behringer HBP 220, Used machine Manufacturer: Behringer Type: HBP220 Year of manufacture: 1995 Inclusion dimensions: 2400 x 1800 x 1500 mm Weight: ~1300 kg Cutting range: 350 x 220 mm Ø: 220 mm Bodsy Hpf Aepfx Aqwell - Hydraulic vise - Chip conveyor Works perfectly, two-handed start

Condition: good (used), Tensioning device for automatic band saw, saw band rollers, saw band guide -Holder, from Behringer HBP automatic band saw -Bore: Ø 80 mm -Dimensions: 380/140/H50 mm -Weight: 8.2 kg Blsdogcct Ropfx Aqwjl

Condition: used, Year of construction: 1993, machine/vehicle number: 493187, Lg. No. 21236 Bjdpfjwqpmnex Aqwjll Hydraulic - twin-column guided miter - metal band saw Technical Data: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Miter adjustment via handwheel - Saw band size 5400 x 38 x 1.3 mm - Cutting speed steplessly adjustable 19 - 130 m/min - Cutting pressure steplessly adjustable 0 - 10 m/min - Manual material clamping - Pre-selection of the stroke height of the saw band - Micro-spray coolant system - Total drive power 400 V / 8 kW - Space requirement ca. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Infeed + outfeed roller conveyors each approx. 6000 / 8000 mm

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Type: HCS 150 Machine number: Type no.: 49600H0024 Year of manufacture: 2008 Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Total load capacity: 4,000 kg Conveyor manufacturer: Geppert Bodexpd D Nopfx Aqwoll Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 Bar

Condition: good (used), Year of construction: 1989, machine/vehicle number: 0172, Offer 25286 Technical specifications: - Saw blade dimensions: 400 x 35 x 2.0 mm - Cutting range - 90° round: approx. 252 mm - flat: approx. 250 x 160 mm - square: approx. 210 x 210 mm - 45° round: approx. 160 mm - flat: approx. 150 x 150 mm - Automatic material feed - Max. vise opening: 265 mm – miter-adjustable vise - Coolant system - Drive: 400 V / 0.65 / 1.6 kW - Required space: approx. W 1400 x H 950 x D 1700 mm Blsdpfsw Ei Tdex Aqwjl - Weight: approx. 600 kg

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 410 mm, BEHRINGER HBE 411 A Dynamic, BRAND NEW MACHINE! manual positioning 18 cut monitoring 22 saw drive 5.2 kW 50-2 Blodpfozixx Isx Aqwol chip conveyor 100 5 Micro 250 bundle clamping device 440 bar start detection 535 retraction cylinder 550 clamping pressure regulation 832 line laser 940 lighting 941 cutting channel extension Behringer New Machines: Come-See-Buy Available immediately from stock Warranty from date of purchase Machine downtime? Fast exchange available Delivery and installation on request Available immediately from stock

Condition: used, Year of construction: 1985, cutting diameter 340 mm dimensions of saw-blade 4860 x 32 x 1,1 mm cutting range square 340 x 340 mm Bjdpfxowyfa Ao Aqwoll cutting speed 17 - 120 m/min drive motor 4 kW weight of the machine ca. 2,5 t dimensions ca. 2600 x 2600 x 1650 mm ncl. chip conveyor and chip tray Hydraulic bundle clamping device incl. electrical circuit diagrams the previous owner only sawed at one speed Adjustable cutting pressure valve HSS bimetal saw band Hydraulic material and saw band tensioning with electrical monitoring Automatic height adjustment of the saw frame Automatic adjustment of the movable band guide arm Electrical piece counter Digital display of the dimension preselection Constant, hydraulic clamping of the carbide band guides

Condition: new, Year of construction: 2025, functionality: fully functional, BEHRINGER HBE 411 A Dynamic, BRAND NEW MACHINE! Cut monitoring 22 AFC-Pro 33 Saw drive 5.2kW 50-2 Chip conveyor 100 Bodpfx Ajyam Srsqwoll Bar start detection 535 Lighting Behringer new machines: Come-See-Buy Immediately available from stock Warranty from date of purchase Machine breakdown? Replacement in the shortest possible time Delivery and setup available on request Immediately available from stock

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Blsdpfx Aqsu Nit Rowel Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: excellent (used), Year of construction: 2006, Berg & Schmid CNC Sawing Machine Year of manufacture: 2006 Control system: - CNC control (freely programmable) Cutting range: - Round: 410 mm - Flat: 410 mm - Width 3500 x Length 2000 x Height 2200 mm - Working height 730 mm Cutting speed: - 12 – 110 m/min. - Material feed via precision ball screw and linear guide. - Hydraulic saw blade tensioning. - Automatic double-sided saw blade free-travel device. - Hydraulically driven chip conveyor. - Chip pressure regulation for thin-walled tubes and profiles. - Frequency-controlled sawing drive, stepless. - Automatic initial cut function. - Saw blade path monitoring Sawing drive: - 5.5 kW Blodszp Inlepfx Aqwol Accessories: - 10 new saw blades Delivery time: - Immediate

Condition: used, Year of construction: 1982, Cutting height ca. 280 mm cutting width ca. 280 mm Blodjvwfc Hjpfx Aqwel Dimensions (L/W/H) 1500x700x1400 mm

Condition: used, Year of construction: 1982, Technical details: cutting diameter: 120 mm dimensions of saw-blade: 425 x 30 mm Blodou Nilajpfx Aqwsl cutting range 90 degrees: round: 120 mm height over floor: 800 mm electrical connection: 380 V / Hz. strokes per minute: 60 / 92 / 140 Hübe/min. total power requirement: 1,5 kW Overall size: ca. L:1,2 x B: 0,75 x H: 1,10 (Bügel angehoben) m Vice adjustable in longitudinal direction by loosening the nuts. Mitre cut and straight cut: 45° and 90° with cutting pressure and lifting hydraulics After the cut is completed, the machine switches off and the saw blade remains in the lowest position. Workpiece holder via fixed jaw and clamping jaw, with hand crank Coolant device in the base limit stop *

Condition: good (used), Year of construction: 2001, power: 12 kW (16.32 HP), total height: 3,270 mm, total length: 4,000 mm, total width: 2,250 mm, overall weight: 4,400 kg, Capacity 90°: 530 x 530° Min. cutting length:40mm Max. sawing: 17 - 110 Power: 12kW Chip conveyor: Yes Length: 4000mm Width: 2250mm Blsdpeu U Narsfx Aqwol Height: 3270mm Weight: 4400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Manufacturer: Behringer Eisele Type: VMS 350 Condition: NEW Machining cross section max. round at 90° 120 mm Bsdpfoy S Eytox Aqwjll Machining cross section max. rectangle at 90° 170 x 100 mm Machining cross section max. round at 45° 120 mm Machining cross-section max. rectangular at 45° 120 x 100 mm Saw blade diameter 350 mm Saw blade width 3 mm Bore diameter 40 mm Adjustable saw blade speed 17 rpm / 34 rpm Machine head swivels 45-90-45-30° Total motor power 1.4/1.9 kW Width 900 mm Length x width x height 1050 x 900 x 1900 mm

Condition: good (used), gearing type: mechanical, Do you have gearbox damage on your Behringer or Kasto saw .....? We can repair or refurbish your gearbox, no problem. Bledpfxjtv Eyvj Aqwjl In some cases we can also supply you with replacement gearboxes from stock

Condition: used, Technical details: Saw blade diameter: 400 mm Bedpfju Niuzjx Aqwell cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: new, Available from stock / available in the short term! Speed: 17/34 rpm. For saw blades up to 350 mm in diameter. With pole-changeable three-phase motor, 1.4/1.9 kW, stationary base frame with integrated coolant system and chip drawer. Cutting range: Flat 90° 170 x 100 mm Flat 45° 120 x 100 mm Flat 30° 85 x 100 mm (only to the right) Square 90° 100 mm Square 45° 95 mm Square 30° 85 mm (only to the right) Round 90° 120 mm Round 45° 120 mm Round 30° 100 mm (only to the right) Technical data: Length 895 mm Width 665 mm Height 1750 mm Weight 300 kg Table height 900 mm Bsdpfx Aqollvpwowjll Options: Roller conveyors and length measuring devices (image = example, available in manual and automated versions, upon request) We recommend our coolant concentrate, which has been tried and tested for "Eisele" saws for decades, our microspray oil (for machines with a microspray system), as well as high-quality circular saw blades and band saw blades for your specific needs. Feel free to contact us for a non-binding quote!

Condition: good (used), Year of construction: 2001, machine/vehicle number: 201224, functionality: fully functional, cutting speed: 110 mm/min, Used band saw Bodpfxeuc Tpae Aqwoll Type: Semi-automatic *This machine was initially automatic, it has been modified to be semi-automatic. Cutting capacities: 90º round, 15º left-right, 30º left-right, 45º left-right: 410mm. Square at 90º: 850x400mm Square at 15º left-right: 800x400mm Square at 30º left-right: 700x400mm Square at 45º left-right: 550x400mm Minimum cutting capacity: 10mm / 10x8mm Minimum cutting length: 35mm Cutting speed: 17-110m/min. Drive motor power: 7.5kw Hydraulic pump motor power: 5.5kw Actions from control panel: Rotation to degrees. Saw drive Drive forward and backward the feed rollers. Raise and lower clamp clamps. Open and close clamp Machine being overhauled. Request operating video.

Condition: new, Year of construction: 2023, ! Machine offer for customers in Lithuania / Latvia / Estonia. Bledpfjiy Rc Rex Aqwel The new high-performance automatic bandsawing machines of the HBE Dynamic series, provide performance, ease of use and energy efficiency. You can rely on accurate and fast cuts in easy to difficult to cut materials, in solids, tubes and profiles. The rigid, low-vibration saw frame in cast iron construction and the linear guide system in portal design ensure the best cutting results and maximum blade service life. By the standard servo-downfeed system with BEHRINGER cutting pressure control, the HBE Dynamic series provides short idle times and a precise saw feed movement. The standard cutting pressure control prevents overloading of the saw blade and increases the lifetime significantly. It therefore offers the best conditions for a dynamic, tool gentle sawing. Available models: - HBE261A - HBE321A - HBE411A - HBE511A

Condition: used, Year of construction: 1977, cutting diameter:250 mm Bljdpfx Aqocxxw Uewjl band length:450 mm cutting speed:50/70/100/135 Hübe/min range L-W-H:2,6 x 1,8 x 1,1 mm total power requirement:3,8 kW weight of the machine ca.:1,2 t

Year of construction: 1978, condition: used, machine/vehicle number: 1078136, Behringer full automatic sawing machine in a good working condition. Bljdebta Dmepfx Aqwsl Capacity round 320mm

Condition: new, Year of construction: 2022, You have a Behringer saw and your control panel is defective, the membrane keypad is broken, but the machine is still too good to replace. The BT 41 is a very common control panel and we can repair it for you! Please contact us. Bsdpfx Astv Ip Ijqwsll

Condition: used, Hydraulic band saw (Made in Croatia), type BS 320 Year of manufacture approx. 1980 Cutting range, round: Ø 320 mm Cutting range, square: 280 x 280 mm Saw blade: 550 x 45 x 2.25 mm Material feed height: 680 mm Saw speed: 42 - 55 - 85 - 110 strokes/min Motor power: 1.8 and 2.4 kW, pole-changing Power supply: 400 Volt, Hz - Miter adjustment up to 45° - Saw motor with 2 speeds and 2 V-belt stages - Hydraulic saw arm lowering Bjdpjlqadhjfx Aqwoll - Hydraulic cutting pressure adjustment via throttle valve - Coolant system in the machine base Space requirement, band saw L x W x H: 1900 x 1350 x 1500 mm Width without stop: 800 mm Weight: approx. 750 kg Good condition