Used Beka-Mak Bssa 800G/2 for sale (79,020)

Condition: new, pressing force: 250 t, stroke length: 400 mm, - Cylinder stroke 400 mm - Working width 1200 x 450 mm - Cylinder is movable - Pressure gauge Iiodpfx Aegg Nygeb Nob - With V-blocks - Emergency stop - Weight 2250 kg - Motor power 7.5 kVA - Documentation - 400 V

Condition: good (used), functionality: fully functional, Automatic stacking unit for destacking battens, boards or long goods in kiln trucks. Manufacturer Makor, type ACA 2. Equipped with 2 transfer arms. Part lengths approx. 1600 - 3000 mm (depending on part thickness), maximum part width approx. 170 mm. Installation length approx. 3000 mm. Weight approx. 1500 kg. Iedpfoyxyfksx Ab Nsib

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container Iisdpfeyuut Hox Ab Njb -Drying oven: with isolation transformer -Type: ES 2 -Technical data: unfortunately no longer legible -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm -Weight: 14 kg

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. Iijdpfx Ajyb Rpdsb Nsb The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK4 4 pieces -Type: MK5/4 / MK5/3 / MK5/2 Iedeylkunspfx Ab Neib -Price/Fee: complete -Transport dimensions: 180/90/H170 mm -Weight: 8.1 kg

Condition: good (used), Gas cylinder trolley, gas cylinder cart, steel cylinder cart Iijdjyka S Hepfx Ab Nob -Tires: Air -External dimensions: 1000/750/H1200mm -Weight: 36 kg

Condition: new, Year of construction: 2026, functionality: fully functional, 2 m Roller Conveyor with 2 Tonnes Capacity Machine features For feeding and collecting material worked Very durable steel rollers in bearings Height adjustment – fits machines of any height Universal use e.g. band saws for metal Technical data Rollers diameter 90 mm Rollers working length 470 mm Rollers total length 500 mm Number of rollers 7 Conveyor length 2000 mm Conveyor width 600 mm Height adjustable Iisdpovu S Ecofx Ab Nob Load capacity 2000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Large roller table 1 m Machine description Isdpfxovu S Auo Ab Nsib For feeding and collecting machined material Very durable steel rollers installed in bearings Adjustable height control – it is suitable for machines of any height Universal use e.g. for metal band saws Technical data Diameter of rollers 90 mm Working length of rollers 470 mm Total length of rollers 500 mm Number of rollers 6 Roller table length 1000 mm Roller table width 600 mm Height adjustable 545-855mm Load capacity 2000 kg

Condition: new, Year of construction: 2026, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Iisdpsudi Uzefx Ab Nob Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: used, Technical details: current capacity: 100 kVA throat: 600 mm arm distance: 600 mm control: Bosch Programmier-Feldbusse pincer opening adjustable: 240 - 540 interface: RS 485 voltage: 500 V connection voltage: 380 V air pressure: 6 bar cooling water consumption: 14 l/min weight of the machine approx.: 770 kg Iisdpfou Nv Eajx Ab Njb space requirements of the machine approx.: 1,5 x 0,95 x 2,1 m SPOT WELDING MACHINE - WELDING TRANSFORMER Application: Spot, projection and series spot welding 1 - 1000 Hz Lifting cylinder electrode force 11 daN PSI 6000 medium frequency inverter with integrated control function (50/60 Hz AC mains voltage) Electrode arm Ø 35mm Electrode holder adjustment 200mm (manual) Arm distance min. 240mm max.: 540mm Manual adjustment Operation via Rexroth IntraControl VCP05 control panel and foot switch incl. replacement electrodes (water-cooled) external Rittal water recooling unit SK3320.609 *

Condition: new, table length 4000 mm table width 2000 mm burner heads Precitec Procutter x-axis 4050 mm z-axis 150 mm y-axis 2050 mm Isdpfx Abexabn Hj Njib total power requirement 18,0 kW weight of the machine ca. 18.150 kg dimensions of the machine ca. 12430 X 5664 X 2310 m

Condition: excellent (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 1 inch 12 teeth -Type: 20B-2 1 1/4" x 3/4" -Shaft mount: inner Ø 50 mm -Dimensions: see photos -Total dimensions: Ø 138 x 80 mm Iisdev Ukxuspfx Ab Nsb -Weight: 3.8 kg.

Condition: good (used), drilling machine, drilling machine, plate drilling machine, row drilling machine -Drilling machine: for Styrofoam or other materials, mobile -Drills: 2x Metabo SBEV 1100-2 S Isdpswlfr Nofx Ab Neib -Speed: 0-3100 rpm -Aluminium frame -Dimensions: see photos -Dimensions: 1200/870/H1210 mm -Weight: 108 kg

Condition: excellent (used), Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: conveyor belt conveyor belt -Width: 170 mm -Length: 2400 mm -Thickness: 2 mm -Dimensions: Ø 100 x 170 mm -Weight: 0.8 kg Iiodpfx Aol Ab Dqeb Neb

Condition: used, hinge, door hinge, folding hinge, steel hinge -Hinge: Door hinge folding hinge 2-part, box with 50 pieces -Type: 2-part 105x50 mm Iodpfjtxkv Esx Ab Nsib -Material: galvanized steel -Number: 23x packages available -Price: per package (50 pieces) -Dimensions: 200/150/H140 mm -Weight: 6.4 kg/package

Condition: good (used), electric motor, three-phase motor -Electric motor: Type DM 63 K 2 Iijdpfev Ia Iljx Ab Neb -Power: 0.18 kW -Speed: 2800 rpm -Shaft: Ø 11 x 22 mm -Design: B3 -Protection class: IP 55 -Dimensions: 220/163/H150 mm -Weight: 6.5 kg

Condition: used, Spiral wound gasket, labyrinth body gasket, flange gasket -Spiral seal: Flange seal according to DIN EN 12560-2 5 pieces/package Iodpfx Absiqu Shj Noib -Type: 2 1/2" 150lbs 1.4404/PTFE -Dimension: Ø124 x 2mm -Price: complete -Total weight: 0.7 kg

Condition: used, Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributo -Hydraulic fitting: T-distributor 2 1/2" -Type: 3000-2 1/2-76.1 A3L -Number: 6x distributor block available -Price per piece Iedpfx Absirf Eys Nsib -Total dimensions: 235/120/H160 mm -Weight: 17 kg/pc.

Condition: excellent (used), Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: Conveyor belt -Width: 50 mm Ijdpfx Aeiruipob Noib -Length: approx. mm -Thickness: 2 mm -Quantity: 1 conveyor belt available -Transport dimensions: Ø 327 x 50 mm -Weight: 2.5 kg

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, gate valve, gate valve, gate valve, sleeve valve Iisdpeigwddofx Ab Njb -Gate valve: stainless steel sleeve valve type 2 CF8M 200 unused -Size: DN50 PN16 -Number: 15x sliders available -Price per piece -Dimensions: 100/100/H215 mm -Weight: 2 kg/pc.

Condition: good (used), Profile bending machine, bending machine, pipe bending tool -Handover: in the current condition as viewed Iodpfx Aogrzvgob Nsib -Accessories: 1 damaged pressing tool: 3/4", see photos -suitable for: pipe size 1/2" to 1 1/2" -Dimensions: 630/670/H440 mm -Weight: 36 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilt cylinders, lifting cylinders Iodohwgfgopfx Ab Neib -Hydraulic cylinder: double-acting stroke 320 mm -Piston rod: Ø 28 mm -Receptacles: Ø 25 mm -Cylinder: outside Ø 60 mm -Joint head: Elges GK 25DO -Hole spacing: retracted 525 mm -Quantity: 49x cylinders available -Price per piece -Dimension: 580/60/H81 mm -Weight: 6.6 kg/pc.

Condition: good (used), Pallet rack, heavy-duty rack, high-bay rack, boltless rack, storage rack stand -Pallet rack: Boltless rack 2 bays / rack length 3900 mm -Field width: 1800 mm -Shelf height: approx. 3200 mm -Stands: 3 pieces 3155/1240/100 mm -Cross braces: 20 pieces 1865/60/240 mm -Shipping/Price: complete -Transport dimensions: 3200/1250/H660 mm -Total weight: 352 kg Iodpfx Asw Thy Dsb Noib

Condition: good (used), electric motor, three-phase motor -Electric motor: type T 71A 2 AB3 -Power: 0.37 kW -Speed: 2820 rpm -Shaft: Ø 14 x 30 mm Iisdpjv Hzmysfx Ab Nsb -Protection class: IP 54 -Dimensions: 245/140/H170 mm -Weight: 5.8 kg

Condition: used, Sprockets, triplex sprocket, sprocket, conveyor sprocket -Pitch triplex sprockets: 1"x 17.02 mm -Number of teeth: 40 teeth -Diameter: 340mm -Total width: 105mm -Dimensions: see photos Iodpjiq Th Iefx Ab Njib -Intake: Ø 75 - 76 mm -Total dimensions: Ø340 x 105 mm -Weight: 45.3 kg -other sprockets in stock