Used Belichter / Exposer for sale (71)

Condition: new, Water-based corrosion protection 2200, 5 liters, light-colored canister, OKS · Temporary corrosion protection for all bare metal surfaces exposed to environmental influences such as humidity, saline atmosphere, or industrial atmosphere. · Environmentally friendly, VOC-free product based on water. · Easily removable with warm water and water-based cleaners such as OKS 2650. · For use in the storage and transport of metal semi-finished products, spare parts, molds, and machines. · Application temperature: -40 °C to +70 °C · Other technical characteristics: Color: light-colored · Packaging: Canister Podpfj Abw Naox Ai Torc · Application temperature: -40 to +70°C Packaging: Canister Content: 5 liters

Condition: used, This listing is for the Autoclude Model V Peristaltic Pump The unit is in full working condition and is ready for immediate use The Autoclude peristaltic pump is a type of tube (hose) pump made by Verderflex / Autoclude. Its defining feature is that only the flexible tube (or hose) inside the pump is in contact with the fluid being pumped. The rest of the pump (rollers, casing etc.) stay clean / isolated. This makes them good for contamination-critical, corrosive, slurry, or shear-sensitive fluids Design / Key Features Some of the design / functional features: Seal-less and valveless: Since fluid is contained within tube, no seals exposed to fluid or valves that could leak. Self-priming: Can start pumping without needing fluid completely filling the inlet, and often able to handle gas or ‘air’ in the line. Capable of running dry without damage (when tube material allows) for short durations. Electrolab Group Reversible flow: The rotor or drive can reverse, so flow can be reversed to purge lines, etc. Pedpfx Aexhduxoi Torc Gentle pumping: Because fluid only contacts tube, and the shearing is limited, better for shear-sensitive liquids / slurries. Rapid tube replacement Stackable / multi‑head options: Some “easy tube loading” models allow several pump heads to be driven by a single drive unit, for multi‑channel or sampling/analysis setups

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640/1.2 is a sensational machine for precision bending of all types of metal sheets (steel 1.2mm, titanium zinc 1.2mm, aluminum of 1.5 mm, copper sheet 0.8 mm). Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard. - Max. bending angle: 145 degrees Podpsdad Adsfx Ai Tsrc - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 350 kg Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Only shipping is possible Delivery every week Price excl. shipping We provide invoices with 0% of tax.

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640.-0.8 is a sensational machine for precision bending of all types of metal sheets Predpfx Aisc Nwd Ao Tjc (steel 0.8mm, titanium zinc 0.8mm, aluminum of 1.2 mm, copper sheet 0.65 mm). Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard.

Condition: new, ULVAC Dry Vacuum Pump Here we offer a ULVAC dry vacuum pump. ULVAC Dry Vacuum Pump Solution for demanding process applications Dry vacuum pump ULVAC's unique approach to utilizing the latent heat within the pump body enables the LR/HR/UR series to deliver performance even in the most demanding processes. ULVAC has focused its design efforts on maintaining an extremely uniform high temperature across all pump stages, optimizing this pump family for CVD and etching applications. Compatible with the ULVAC ECO-SHOCK system for additional energy savings. Features The LR series pump is designed for load-lock chambers and PVD processes. ULVAC's unique aluminum design enables a very uniform temperature distribution throughout the pump body: The ULVAC LR series pump is designed for applications that require a heated pump, heated gas lines, and/or heated exhaust lines. Excellent helium pumping capacity Encapsulated motor for safety and ease of maintenance Withstands power interruptions of up to 500 ms. Internal components are specially treated to ensure a high degree of surface hardness and excellent corrosion resistance. This prevents wear of internal pump parts when exposed to corrosive gases. Predpfxezdqtgo Ai Tjc (LR Series) Designed for process gases that generate powdery by-products, such as Si crystal growth furnaces Pre-pump for turbo-molecular and mechanical booster pumps Type: LR600 Condition: new Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Variant C) 4 cords for tying around the back of the head. Large pack, ideal for your customers, employees, or resale! The blue face masks made of 100% cotton work according to the principle of a photoactive dye, which reactively produces oxygen after being briefly exposed to normal daylight or light from other light sources. In this way, the face mask is protected from unwanted pollutants. This effect of the fabric lasts for up to 50 wash cycles. Wash at 60°C if soiled and iron with a hot iron. Disinfect the mask regularly! Disinfection options: 1. Spray the product with a disinfectant. 2. Iron with a hot iron. A hot iron can also be used to disinfect dirty face masks. 3. Place in an oven preheated to 60°C for 60 minutes. 4. Expose the mask to strong UV radiation for one hour. Hygiene item, therefore excluded from exchange if the packaging has been opened! Psdpfx Ais Adgfpj Terc WARNING: Not a medical device! These face masks are not certified according to protection classes and are therefore not suitable for intensive care areas!

Condition: new, Allround Paste 250 white, 1000g can, OKS Prjdj Abwzvjpfx Ai Toc for screws and sliding surfaces exposed to high pressures and temperatures · Optimal ratio of tightening torque to achievable preload · Very good corrosion protection · Also suitable for stainless steel connections · Can be used as a universal high-temperature paste · NSF H2 Reg. No. 131379 · Other technical properties: Temperature resistance: (Lubrication/Separation) -40 to °C · Color: white · Approval: NSF H2 REACH - Hazard pictogram: GHS05 REACH - Hazard pictogram: GHS09 REACH - H-statements: H315 - Causes skin irritation. REACH - H-statements: H318 - Causes serious eye damage. REACH - H-statements: H410 - Very toxic to aquatic life with long-lasting effects. REACH - Signal words: Danger Content: 1000 g Temperature: (Lubrication/Separation) -40 °C to + °C / °C Packaging: Can

Condition: new, Variant B) 4 strings for tying around the back of the head Large pack, ideal for your customers, employees, or for resale! The white face mask is made of 100% cotton or a blend of 80% cotton and 20% polyester (depending on fabric availability; there is no difference in quality; please inquire if necessary). The antibacterial effect is ensured by the final treatment of the fabric through the deposition and fixation of a reaction mixture of titanium dioxide and silver chloride. Lightweight, single-layer, high-quality technical material for easier breathing compared to double or triple-layer materials. DISINFECT BEFORE FIRST USE!!! Wash at 60°C if soiled and iron with a hot iron. Disinfect the mask regularly! Disinfection options: Psdpfx Aio Adggao Terc 1. Spray the product with a disinfectant. 2. Iron with a hot iron. Dirty face masks can also be disinfected with a hot iron. 3. Place in an oven preheated to 60° Celsius for 60 minutes. 4. Expose the mask to UV radiation for 1 hour. Dimensions: 18 x 19 cm. Sales unit: 50 pieces in a bag. Hygiene product – no returns! WARNING: Not a medical device! These face masks are not certified according to protection classes and are therefore not suitable for intensive care areas!

Condition: new, Variant B) 2 fixed elastic bands for fastening behind the ears (without ties) Large pack, ideal for your customers, employees, or for resale! This face mask works on the basis of filtration with an efficiency of 80-93%. The lifespan depends on the air pollution and how it is used. The NANO face mask is intended for reuse. It is a fine non-woven fabric with a membrane inside, which requires gentle handling. Lightweight, single-layer, high-tech material that is comfortable to wear and allows for easier breathing (also for asthmatics) than with double or triple layers. Contaminants are filtered out and not inhaled. DO NOT WASH OR IRON!!!!! DISINFECT BEFORE FIRST USE! Podpfx Ao Adgfvoi Tsrc Wipe away dirt with a damp cloth. Please disinfect regularly! Disinfection options: 1. Spray with a disinfectant. 2. Use hot steam from an iron at a distance of approximately 5 cm. 3. Boil in water. 4. Place in an oven heated to 60°C for 60 minutes. 5. Expose the mask to strong UV radiation for 1 hour. Hygiene item, therefore not eligible for exchange if the packaging has been opened! ATTENTION: Not a medical device! These face masks are not certified according to protection classes and are therefore not suitable for intensive care areas!

Condition: new, Variant B) 2 fixed elastic loops for fastening behind the ears (without ties) Large pack, ideal for your customers, employees, or for resale! The white face mask is made of 100% cotton or a blend of 80% cotton and 20% polyester (depending on fabric availability; no difference in quality; please inquire if necessary). The antibacterial effect is ensured by the final treatment of the fabric through the deposition and fixation of a reaction mixture of titanium dioxide and silver chloride. Lightweight, single-layer, high-quality high-tech material for easier breathing than with double or triple layers. DISINFECT BEFORE FIRST USE!!! Wash at 60 °C if soiled and iron with a hot iron. Disinfect the mask regularly! Disinfection options: 1. Spray the product with a disinfectant. Pedpfx As Adgf Noi Terc 2. Iron with a hot iron. Dirty face masks can also be disinfected with a hot iron. 3. Place in an oven preheated to 60 °Celsius for 60 minutes. 4. Expose the mask to UV radiation for 1 hour. Dimensions: 18 x 19 cm. Sales unit: 50 pieces in a bag. Hygiene item - not subject to exchange! WARNING: Not a medical device! These face masks are not certified according to protection classes and are therefore not suitable for intensive care areas!

Condition: new, Variant C) 4 straps for fastening around the back of the head Predpfo Adgf Aox Ai Toc Large pack, ideal for your customers, employees, or resale! This face mask works on the basis of filtration with an efficiency of 80-93%. The lifespan depends on the air pollution and how it is handled. The NANO face mask is intended for reuse. It is a fine non-woven fabric with a membrane inside, which requires gentle handling. Lightweight, single-layer, high-quality high-tech material that is comfortable to wear and makes breathing easier (even for asthmatics) than with double or triple layers. Impurities are filtered out and not inhaled. DO NOT WASH OR IRON!!!!! DISINFECT BEFORE FIRST USE! Wipe off dirt with a damp cloth. Please disinfect regularly! Disinfection options: 1. Spray with a disinfectant. 2. Using hot steam from the iron from a distance of approximately 5 cm. 3. Boil in water. 4. Place in an oven heated to 60°C for 60 minutes. 5. Expose the mask to strong UV radiation for 1 hour. Hygiene item, therefore not eligible for exchange if the packaging has been opened! ATTENTION: Not a medical device! These face masks are not certified according to protection classes and are therefore not suitable for intensive care areas!

Condition: new, High-performance copper spray, 500 ml spray can, CARAMBA · Provides highly effective protective and lubricating layers on parts exposed to high temperatures. · Effective from -30°C to +1100°C. · Protects against corrosion, seizing, and galling. · Reduces noise and vibration. Prjdj Abw Rqspfx Ai Tjc · Facilitates assembly and disassembly. · Ideal for use as a mounting lubricant for pipes, flanges, exhaust systems, combustion chambers, threaded connections, etc. · Resistant to high pressure. · Excellent adhesion and resistance to peeling. · Resistant to salt water and most acids/alkalis. · Other technical properties: Container: Spray can Container: Spray can Content: 500 ml

Condition: new, Variant B) 2 fixed elastic bands for fastening behind the ears (without ties) Large pack, ideal for your customers, employees, or resale! The blue face masks made of 100% cotton work according to the principle of a photoactive dye, which reactively produces oxygen after being briefly exposed to normal daylight or light from other light sources. In this way, the face mask is protected from unwanted pollutants. This effect of the fabric lasts for up to 50 wash cycles. Pjdpfj Adgfiox Ai Tsrc Wash at 60°C if soiled and iron with a hot iron. Disinfect the mask regularly! Disinfection options: 1. Spray the product with a disinfectant. 2. Iron with a hot iron. A hot iron can also be used to disinfect dirty face masks. 3. Place in an oven preheated to 60°C for 60 minutes. 4. Expose the mask to strong UV radiation for one hour. Hygiene item, therefore not eligible for exchange if the packaging has been opened! WARNING: Not a medical device! These face masks are not certified according to protection classes and are therefore not suitable for intensive care areas!

Condition: new, Chain protector 341, 400 ml, greenish spray can, OKS · Extremely good creep properties · Strong adhesion and resistant to being flung off · Very good wear protection · O-ring neutral · Solvent-free · For high-speed chains · Synthetic lubricant for machine components exposed to high pressures or corrosive environments Prjdpfxs Abw I No Ai Tec · Other technical properties: Container: spray can Container: spray can Content: 400 ml

Condition: new, Contact cleaner KONTAKT 60 PLUS, 200 ml spray can, KONTAKT CHEMIE · Plus protection · Oxide-removing contact cleaner combined with a high-quality lubricant and protective oil · Ensures long-lasting, trouble-free operation of electrical devices · Dissolves dirt and even stubborn oxide layers and eliminates disruptive contact resistance · Reduces insertion forces and protects against moisture and corrosion Prjdj Abxpuspfx Ai Tjc · Ideal for connectors, switches, potentiometers, etc., especially when exposed to the elements · NSF K2-registered for use in the food industry (Reg. No. 140308) · Other technical features: Packaging: Spray can Content: 200 ml Packaging: Spray can

Condition: new, functionality: fully functional, power: 110 kW (149.56 HP), fuel type: electric, overall weight: 21,360 kg, Year of construction: 2026, Jaw Crushers generally crushes 200 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: Podpfx Ajz Sq Apei Tsrc • Model: FABO CLK 1175 • Type: Primary Jaw Crusher • Inlet Dimensions: 1070 x 760 mm • Jaw Opening: 45-160 mm • Max Feeding: 760 mm • Capacity: 200 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 110 Kw • Bearings: Heavy duty SKF-FAG • Weight: 21360 kg • Dimension: 2730 x 1698 x 2492 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, High-performance lubricant 671, 400 ml spray can, OKS · Long-term lubrication of machine components exposed to high pressures, dust, or moisture · Excellent corrosion protection, good penetrating properties · Lubrication in all areas where good penetration is the only way to apply lubricant, e.g., on joints, hinges, levers, and guides · Other technical properties: Container: Spray can Content: 400 ml Predps Abw Ezefx Ai Tsc Container: Spray can

Condition: new, Year of construction: 2026, The magnetic separator is an industrial device designed for continuous purification of coolants and oil-based fluids from ferromagnetic particles generated during machining processes. In closed-loop systems, it effectively removes metal chips and fine particles from the working medium, stabilizing cooling and lubrication parameters while reducing wear on pumps and installation components. Magnetic coolant separator – key benefits in maintaining clean machining fluids In production environments, coolant operating in a closed circulation system is constantly exposed to metallic contamination. Ferromagnetic particles act as an abrasive material – accelerating pump wear, causing deposits in channels and nozzles, and reducing the stability of the lubricating film. As a result, the risk of surface scratches increases, machining quality decreases, and downtime related to filtration and coolant replacement becomes more frequent. A magnetic separator for machining fluids solves this problem by automatically and continuously capturing metal particles without interrupting the production process. This allows the working medium to maintain consistent operating parameters, while the cooling system remains stable even under intensive working conditions. What do you gain by implementing a magnetic separator in a coolant system? Continuous coolant cleanliness – without the need to stop production. Protection of pumps and circulation components by reducing abrasive particle contamination. More stable machining quality (fewer scratches and improved process repeatability). Extended coolant service life and reduced disposal costs. Lower failure rates and reduced maintenance costs of filtration systems. Improved waste management – automatic removal of collected chips outside the working area. Why is magnetic separation more effective for removing ferromagnetic particles? Unlike traditional mechanical filters, which require periodic cleaning and may experience reduced flow due to filter clogging, magnetic separation operates continuously with minimal maintenance requirements. A magnetic coolant separator removes ferromagnetic particles consistently, maintaining stable fluid flow and high machine availability. Design and operating technology Prjdpfx Aoycc Rpei Tjc The device has been designed to mechanically and continuously separate metallic contaminants from process fluids. The main working element is a stainless-steel magnetic drum, which rotates and attracts ferromagnetic particles from the flowing coolant. The collected contaminants are then removed and transported outside the working area. The removal of collected particles is carried out by a shaft system: Magnetic shaft – responsible for capturing and holding metal particles during the separation process. Rubber-coated pressure shaft – stabilizes the removal of contaminants and assists in directing them into the waste container. Standard equipment Magnetic separator with stainless-steel magnetic drum Rubber-coated pressure shaft Working tank Electric drive Technical specifications Parameter Value Width of rubber-coated pressure shaft 140 mm Diameter of rubber-coated pressure shaft 65 mm Width of magnetic shaft 140 mm Diameter of magnetic shaft 110 mm Inlet connection 50 mm Outlet diameter 53 mm Motor power 0.25 kW Capacity up to 25 l/min Weight 35 kg

Condition: new, Year of construction: 2026, functionality: fully functional, 1 m Roller Conveyor (4 Rollers) The 1 m roller conveyor (4 rollers) is a professional material support and feeding system designed for use with band saws and other machines requiring stable material support during feeding or receiving operations. Thanks to its robust construction, high load capacity of up to 900 kg, and four steel rollers mounted on bearings, this roller conveyor ensures safe and smooth transport of various types of materials, including pipes, profiles, flat bars, and shafts. It is an essential solution for modern production plants and professional workshops. Main advantages of the machine High load capacity – up to 900 kg, ideal for heavy steel components. 4 bearing-mounted steel rollers – diameter 60 mm, length 360 mm each. Adjustable height range of 650–1100 mm – allows adaptation to different machines. Expandable roller conveyor system – possibility of connecting multiple units. Reinforced construction – additional crossbars increase rigidity and stability. Design and technology The entire structure is based on a durable steel frame, additionally reinforced in areas exposed to the highest loads. The main working elements are four steel rollers mounted on precision bearings, ensuring minimal rolling resistance even under heavy loads. The 1000 mm long roller conveyor can operate as an independent module or be connected with additional sections to create a functional material handling system. The construction ensures safe and stable movement of components without the risk of shifting or slipping. Precision and work efficiency The roller conveyor significantly improves the efficiency of cutting, drilling, and welding processes by eliminating the need for manual material stabilization. The rollers rotate smoothly and evenly, allowing the operator to precisely position workpieces. An additional advantage is the adjustable working height, which enables integration with various types of machines – from band saws to machining tables and automated production lines. Applications This model can be used in many industrial sectors, including: Facilities involved in cutting and material preparation. Production lines and machining workstations. Welding and structural fabrication companies. Steel and metal processing industries. It is a universal and durable solution for anyone who values stability and efficiency when working with large and heavy materials. Standard equipment 4 bearing-mounted steel rollers (60 × 360 mm) Steel frame with reinforcing elements Height adjustment system (650–1100 mm) Anti-slip leveling feet Technical specifications – 1 m roller conveyor (4 rollers) Prjdpfx Aisvu R Dqs Toc Parameter Value Roller diameter 60 mm Roller length 360 mm Number of rollers 4 Overall length 1000 mm Overall width 450 mm Height adjustment 650–1100 mm Maximum load capacity 900 kg Weight 50 kg

Year of construction: 2025, condition: new, ASK - 0 Hanger Type Shot Blasting Machine; It is used for polishing sheet and metal parts which have come out of press and heat treatment, cleaning and roughening of castings, preparation before paint and rubber coating, taking forging parts to canvases and revision of old parts. (Quantity x Diameter): Ø: 800 H: 700 has 2 turbine x Ø 325mm with 6 blades The cabin is made of ST-37 sheet metal and the hot pot area is supported by Brinell or Manganese wear plate. The interior of the cabinet is covered with a rubber sheet to prevent it from being exposed to abrasion due to the sandblasting process. Rubber sheets are fixed to the cabinet with moldings. (Coating with a complete manganese armor is optionally offered to our customers.) The wear plate cladding is screw-in design for future wear-based replacements. It can be easily changed by authorized personnel in your company. Pedpfxsvkf Age Ai Tjrc Although the cabin door can be pneumatic or manual, it is designed as a winged system and 2 pieces. The cabinet door has a lock system to prevent it from being opened during the blasting process. In addition, there is a sensor or switch on the cabinet that stops sandblasting when the door is open. The system consisting of rail line, suspension gear system and crane (optional) is designed to allow the material to be sanded to move easily inside the machine. Full automation panel is available. Panel materials are Siemens / Schineider brand. Machine control is provided with a 10” PLC screen.

Condition: new, functionality: fully functional, fuel type: electric, overall weight: 14,750 kg, Year of construction: 2026, Jaw Crushers generally crushes 150 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. Prsdpfx Aisz Iq T Ee Tjc GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1160 • Type: Primary Jaw Crusher • Inlet Dimensions: 1000 X 600 mm • Jaw Opening: 40-140 mm • Max Feeding: 600 mm • Capacity: 150 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 90 Kw • Bearings: Heavy duty SKF-FAG • Weight: 14750 kg • Dimension: 2730 x 1326 x 1082 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!