Used Bendi B312-50Ss for sale (60)

Condition: new, flat steel 350 x 15 mm round bar steel 35 mm square edge steel 30 mm L-beam 80x80x8 mm hole diameter in sheet thickness Ø 27 in 13 / Ø 20 in 18 mm blade length 356 mm engine output 3.0 kW Stroke rate 34 Punching capacity max. 500 kN weight 950 kg dimensions 1300x1100x1850 mm Standard equipment: - Knife set for flat steel Itjdpoyv Nafefx Ag Aen - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm)

Condition: new, Year of construction: 2026, overall weight: 3,900 kg, fuel type: diesel, tank capacity: 600 l, color: dark red, power: 2,000 kW (2,719.24 HP), output current: 360 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 200 kW (271.92 HP), nominal power (apparent): 250 kVA, continuous power: 200 kW (271.92 HP), continuous power (apparent): 250 kVA, total length: 4,000 mm, total width: 1,450 mm, total height: 2,300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, Diesel generator set, 250 kVA Generator type: P250SSF Condition: New, 2026 Engine: Perkins 1206A-E70TAG2 Generator: Leroy Somer LSA 46.3 M7 Rated power (standby power/ESP): 275 kVA / 220 kW Rated power (prime/PRP): 250 kVA / 200 kW Rated power (continuous/COP): 200 kVA / 160 kW Isdpfx Asfxlddeg Aetn Rated voltage: 230/400 V Rated frequency: 50 Hz Control voltage: 12VDC Speed control: electric Voltage control: electric (AVR) Soundproofed, weatherproof Network configuration: TN-C Including control panel Including batteries (2 x 110Ah) Including integrated fuel tank (600 L) Including integrated spill containment basin for fuel and engine fluids Including circuit breaker (ABB, 4P) Including documentation/manual Including wiring diagram Warranty: 12 months or 2000 operating hours, whichever comes first. You can configure your generator individually and order numerous additional options: - Socket package 16A - 125A with RCD (residual current device) - Remote control - Insulation monitoring - Extended sound insulation, up to 65 dB/7m possible - Fully automatic automatic transfer switch (ATS) with automatic mains-generator changeover available on request. - Parallel operation with load sharing and peak load management (ComAP IG 1000 controller, VDE 4510 certified) - CHP (combined heat and power) version - ATS for indoor installation with air ducts, supply and exhaust ventilation, etc. Manufactured in Germany Delivery throughout Germany possible for an additional charge. Contact us by email or call us, we will be happy to advise you and provide you with a non-binding offer.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 51 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, power: 11.5 kW (15.64 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Inverter, operating speed: 38 mm/s, pressure: 150 bar, wall thickness: 3 mm, working length: 3,000 mm, Equipment: documentation/manual, 51x3mm NC Type Tube Bending Machine The “Atlas” tube bending machines are nc structures. This type of tube benders includes hydraulic and pneumatic for all clamping and pushing operations. Atlas has 3 different type which are NB, NBR, NBRF. NB series makes bending operation automatically. NBR series makes bending and rotating operation automatically. NBRF series makes bending, rotating and feeding operation automatically. A.C servo engine control gives semi automatic bending capability for NBR and NBRF series. With ergonomic loading height, machine is accordance with health and safety instructions and can avoid the ergonomy problems. Improvable program setup settings for optimizing the results of your bending projects, program setup settings that can be developed. Itodovwg Evjpfx Ag Ajn With energy saving mode, your energy efficiency will be increased, the nature and our future can be protected. Inverter control system, a new generation of precision bending system, can help to optimally actualize your bending project. Powerbend mode will help the bending process of your difficult bending materials. User-friendly, easy and quick to learn interface which allows you to quickly start the new projects. Easy to use with min 7-inch touch screen HMI. Fast and accurate bending with minimal friction with the help of Linear Guide. Flexible bending ability with the help of rotation of bending head. Bending precision will be top level with the help of Non-Vibrating structure. Easy to understand and solve the problems with the help of end user error messages, it will help to keep your business on running. Quality bending with wiper, ball mandrel and other systems.

Condition: new, Year of construction: 2024, overall weight: 2,600 kg, fuel type: diesel, tank capacity: 450 l, color: red, power: 120 kW (163.15 HP), output current: 220 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, total length: 3,600 mm, total width: 1,200 mm, total height: 2,100 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, Diesel generator set, 150 kVA Generator type: C150SSF Condition: New, 2024 Application: stationary Engine: Cummins 6BTAA5.9-G12 Generator: Leroy Somer LSA 44.3 L10 Rated power: 165 kVA / 132 kW Continuous power: 150 kVA / 120 kW Rated voltage: 230/400 V Rated frequency: 50 Hz Speed control: electric Voltage regulation: electric (AVR) Soundproofed (68 dB / 7m), weatherproof Control voltage: 24VDC Grid type: TN-C Includes control panel Includes batteries (2 x 110Ah) Includes batteries including battery switch Includes integrated fuel tank (500 L) Includes integrated drip tray for fuel and engine fluids Includes documentation/manual Includes circuit breaker (ABB, 4P) Manufactured in Germany Warranty: 12 months or 2000 operating hours, whichever comes first. You can configure your generator set individually with us and order numerous optional features: - Socket package 16A - 125A with RCD (residual current device) - Remote control - Insulation monitoring - Enhanced sound insulation, up to 55 dB/7m possible - Fully automatic automatic transfer switch (ATS) with automatic mains-generator changeover available on request. - Parallel operation with load distribution and peak load management (ComAP IG 1000 control system, VDE 4510 certified) Iodpfjfxlc Sjx Ag Ajtn - CHP (combined heat and power) version - ATS for indoor installation with air ducts, supply and exhaust ventilation, etc. The images show a standard series generator set with the corresponding power output from our own production, fully operational. Delivery throughout Germany possible for an extra charge. Contact us by email or call us, we will be happy to advise you.

Condition: good (used), functionality: limited functionality, Year of construction: 1990, WE OFFER AN GOOD CONDITION MACHINE HERBER 75 CNC YEAR: Not known MAX CAPACITY: 75 X 3mm MACHINE NEED BE PUT BACK ON POWER AND CHECKED OIL GASKET NEED BE CHANGED FROM THE OIL TANK . Itsdpfx Agevmtxze Aon MACHINE WAS WORKING IN SAAB - SCANIA TRUCKS IN SWEEDEN

Condition: good (used), Year of construction: 1988, functionality: fully functional, WE OFFER AN POWERFULL MANDREL TUBE BENDING MACHINE IT CAN WORK UP TO 110mm tubes bending. MACHINE CAN BE AS WELL RETROFFITTED TO A CNC CONTROL...WITH ADDITIONAL SEVERAL SERVO MOTORS, TO ROTATE HEAD AND MOVE FORWARD. IT HAS CLAMPING SISTEM AND ALL RAILS SAM AS FULL CNC. Machine comes with a lot of tools accessoriess. Machine just turn on and work, ready for operation, Tools from 60 up to 100mm 6 SETS OF TOOLINGS INCLUDED + MANY ACCESSORIESS AND TOOLS Isdpfx Agjvk I The Astn We can organize transport and loading.

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 38 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, total length: 4,250 mm, power: 19 kW (25.83 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 147 mm/s, pressure: 150 bar, wall thickness: 2 mm, working length: 3,600 mm, Equipment: documentation/manual, 38x2mm Fully Automatic Cnc Tube Bending Machine The "Griffin" tube bending machines are hybrid structures. This type of tube benders includes hydraulic and pneumatic for clamping operations. Bending, feeding, rotation, stack changer and tube aligment operations working with servo engine. Iodpjvurm Hefx Ag Aotn Flexible bending and working capacity with CNC control system. The capacity to adjust molds in 3 different radius scales Ability to automatically convert 3D technical drawings to bending program Multivariable roll bending system Ability to work with or without a mandrel Automatic oil cooling system With linear guideway systems minimize the system gaps in moving parts Program changing feature while in the bending process ETU bending simulation program, for bending process, helps to make 3d tube bending arising from the coordinates, with excellent results. With DcOnTool tool, you can convert X, Y, Z coordinates to bending program (Y,B,C) Can review the last error messages with Dlog Its user-friendly, easy, knowledgeable and quick-to-learn design allows you to start the project quickly. Easy to use with 17 inch computer. The vibration-free structure shall help your work. Unlimited program saving and changing Turkish – English and French language 10 years sending spare parts

Condition: new, functionality: fully functional, Year of construction: 2025, pipe diameter (max.): 76 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, power: 44 kW (59.82 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 48 mm/s, pressure: 150 bar, wall thickness: 3 mm, working length: 3,600 mm, Equipment: documentation/manual, 76x3mm Fully Automatic Cnc Tube Bending Machine The "Griffin" tube bending machines are hybrid structures. This type of tube benders includes hydraulic and pneumatic for clamping operations. Bending, feeding, rotation, stack changer and tube aligment operations working with servo engine. Flexible bending and working capacity with CNC control system. The capacity to adjust molds in 3 different radius scales Ability to automatically convert 3D technical drawings to bending program Multivariable roll bending system Ability to work with or without a mandrel Automatic oil cooling system With linear guideway systems minimize the system gaps in moving parts Program changing feature while in the bending process ETU bending simulation program, for bending process, helps to make 3d tube bending arising from the coordinates, with excellent results. With DcOnTool tool, you can convert X, Y, Z coordinates to bending program (Y,B,C) Can review the last error messages with Dlog Its user-friendly, easy, knowledgeable and quick-to-learn design allows you to start the project quickly. Ijdovwg H Hspfx Ag Aetn Easy to use with 17 inch computer. The vibration-free structure shall help your work. Unlimited program saving and changing Turkish – English and French language 10 years sending spare parts

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, working width: 1,600 mm, installation height: 430 mm, throat depth: 400 mm, operating speed: 50 mm/s, reverse speed: 200 mm/s, back gauge speed R-axis: 200 mm/s, overall weight: 3,500 kg, total length: 2,350 mm, total width: 1,700 mm, total height: 2,220 mm, power: 17.3 kW (23.52 HP), warranty duration: 24 months, Equipment: CE marking, Model: GB-4016E Bending pressure (KN): 400 Bending length (mm): 1600 Distance between columns (mm): 1320 Maximum opening height (mm): 430 Slider stroke (mm): 180 Throat depth (mm): 400 X-axis stroke (mm): 400 Isdowzqx Hspfx Ag Aotn X-axis speed (mm/s): 400 R-axis stroke (mm): 140 R-axis speed (mm/s): 200 Z-axis stroke (mm): 1040 Z-axis speed (mm/s): 400 Machine power (kw): 17.2 Dimensions (mm): 2090*1265*2290 Weight (kg): 3500

Condition: good (used), Tool holder, milling tool holder Iodpsb Ecd Defx Ag Aotn -Recording: SK50 -Tool holder: Ø 40 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg