Used Benziger Cnc Lathe for sale (11,779)

Condition: used, Year of construction: 2003, turning diameter 175 mm control Fanuc spindle tunring speed 6.000 U/min number of tool places 12 Pos. x-travel 125 mm z-travel 120 mm Used, sold without warranty Approximate transport dimensions (LxWxH): 1900x3100x2500 mm Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; Bljdpfozz S Rzex Ahmsn subject to prior sale.

Condition: excellent (used), Year of construction: 2022, 400mm swing, 220mm max diameter, Bjdpfx Ahsz Hatfemsln 510mm cutting length, Siemens 828 Control, 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 3 jaw chuck, low volt light, coolant, Tool setter, swarf conveyor

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, turning diameter over cross slide: 950 mm, turning length: 4,000 mm, turning diameter: 950 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 2 rpm, travel distance Z-axis: 4,000 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret 2 x Fixed Steadies Bjdpjzzq Sqofx Ahmsln

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Blodpfx Ahsu Ix N Ssmjn Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock i.D. *

Condition: not inspected (used), Year of construction: 1998, overall weight: 4,200 kg, Fanuc 21T control 12-position turret Working envelope: 600 x 350 mm Spindle speeds: 3500 RPM Blodpfx Asz Akxyohmjn

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CNC Turning and Milling Center Okuma Multus B300II-W Control: OSP-P 300SA Year of manufacture: 2022 Internal machine no. 55 Bledpoy Ewy Sofx Ahmon X-axis: 580 mm Y-axis travel: (+80/-80 mm) 160 mm Z-axis: 935 mm B-axis: up to 225°, positioning in 0.001° increments W-axis: 1,000 mm Turning length: 900 mm Turning diameter: 630 mm Tool holder: HSK A63 Tool magazine: 40 positions Equipment: - Tool monitoring system - Tool measuring device - ONE touch IGF - Hinged belt conveyor - Coolant tank incl. 20 bar pump - Preparation for in-process measurement - Tool height adjustment in Y-axis for turning tools - Hi-Cut Pro high speed control

Condition: like new (used), Year of construction: 2024, MAZAK QUICK TURN 200MSY Max. machining diameter: 380 mm Max. machining length: 575 mm Max. milling speed: 5,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control: Mazatrol SmoothG - Hydraulic KITAGAWA 3-jaw chuck BB-208 for main spindle, diameter 210 mm - Hydraulic KITAGAWA 3-jaw chuck B-206 for 2nd spindle, diameter 169 mm - Tool Eye - C-axis - C-axis counter-spindle, input accuracy 0.0001° - Y-axis - Interface for bar feeder - Automatic parts catcher - Robot interface - Reinforced coolant pump - MAYFRAN chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders Blsdpozgw Icsfx Ahmen

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,500 h, CNC turning machine DMG Mori CTX beta 800 TG, Year of manufacture: 2016, Approx. 20,500 operating hours, approx. 13,500 load hours, with: - DMG Mori Ergoline control system - Chip conveyor - Lubricant filter system - Machine cooling system Rittal SK 3329540 - Bar feeder Breuning ILS MUK 7012-III, Year of manufacture: 10/2016 The machine can be purchased via an online auction (insolvency) on our website. You can access the website by clicking on the advertisement. Auction end date: Bledpfxoz E A R Do Ahmon October 7, 2026 - 6:00 PM

Condition: good (used), Year of construction: 1997, operating hours: 10,216 h, functionality: fully functional, turning diameter over cross slide: 200 mm, turning length: 300 mm, spindle bore: 32 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 345 mm, spindle motor power: 11 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 8,000 rpm, feed length X-axis: 200 mm, feed length Z-axis: 300 mm, feed rate X-axis: 12 m/min, feed rate Z-axis: 12 m/min, type of input current: AC, torque: 73 Nm, swing diameter over bed slide: 445 mm, chuck outer diameter: 140 mm, spindle nose: DIN55026 Gr. 5, Equipment: documentation/manual, Due to restructuring measures, we are selling our Weiler DZ32 CNC lathe. - Year of manufacture: 1997 - Second owner (previously used in a training workshop) - Very good condition for its age - Very few operating hours - total running hours: 10,216 h - Siemens Sinumerik 820 (GA3) T control with C-axis - Max. turning diameter: 230 mm / max. turning length: 300 mm - Main spindle: 8,000 rpm - Counter spindle: 5,000 rpm - 3-jaw hydraulic chuck Röhm 140 mm for main spindle - Additional collet chuck for main spindle - Collet chuck for counter spindle Bedpfx Aozzcfpehmsln - Drive power: 11.5 kW - Sauter tool holder with 16 driven tools (max. 4,000 rpm) - Tool holder size: VDI 20 - Chip collection tray (hydraulic) - With substructure for height adjustment - Fully functional - Many tool holders available, also with drive; these can be purchased depending on the price. - Complete operating and programming documents (German) - Spare parts and service available from Weiler - Machine can be inspected in our workshop while powered on This offer is non-binding. Subject to prior sale. No online sales. The sale is only to commercial customers after an on-site inspection and acceptance. Due to the age of the machine, the sale is made without any warranty. Pick-up only (EXW) - no shipping.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, spindle bore: 51 mm, spindle motor power: 15 W, workpiece weight (max.): 4,500 kg, type of input current: three-phase, Equipment: documentation/manual, We offer this used Miyano BND-51SY CNC lathe, year of construction 2004. Model: BND-51SY Serial Number: 21YK63387 2x spindle 1x revolver live tools part collection hand part conveyour belt Iemca barfeeder 2x C axis swarf conveyour Spindle Motor SP1: 11 / 15 kW Spindle Motor SP2: 3.7 / 5.5 kW Fanuc control All books and manual available. Run by oil, under power in production, can be tested. Machine is in very good condition and was running in 1 shift only. Bljdpszw Dgtsfx Ahmon If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,600 h, functionality: fully functional, turning length: 640 mm, turning diameter: 460 mm, spindle bore: 66 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 310 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 640 mm, spindle motor power: 22 W, Main spindle C-axis continuous on both spindles 12-position turret Powered tools, 12,000 rpm Electronic handwheel Bar feeder interface Chuck on both spindles, Ø210 mm Tool presetter Chip conveyor Tool life management High-pressure pump, 35 bar Chip collector Bjdpfx Aezzbxhehmsln Set of tool holders

Condition: used, Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center 2 Axes: X, Z Model: TA 15 Year: 2015 Bsdpfxez Alqdo Ahmjln CNC: Fanuc Series 32i-Model B

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Bjdpjztctqsfx Ahmeln Width: 3609mm Height: 3409mm Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1999, • FANUC 210i - T control (cycles) • Max. distance between centers: 1,250 mm • Max. turning diameter: 400 / 585 mm in offset • Spindle speed: 12 . . . 2,500 rpm • Spindle bore: 54 mm • X-axis: 210 mm • Z-axis: 1,181 mm • Cutting gap adjustment: 0.05 – 0.8 mm • Motor power: 7.5 kW Bjdpjw S E R Refx Ahmsln • Weight: approx. 2,700 kg

Condition: good (used), Year of construction: 2010, CNC lathe, Haas brand, GT-10 model, year 2010. Bodpfoz D D I Uox Ahmjln

Condition: good (used), Year of construction: 1997, functionality: fully functional, Used CNC turning machine Manufacturer: Böhringer Type: VDF 250 Cm Year of manufacture: 1997 Bljdpsz Anv Nefx Ahmen with accessories.

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center 4 Axes: X, Z, C, B Type: TL 25 BTM Year: 2004 CNC: GE Fanuc Series 18i-TB Video Available Inspection Possible Jaw Chucks: Included ✅ Bsdpfjz Ih A Dox Ahmsln Tool Holder: Included ✅ Documentation: Included ✅ Chip Conveyor: Included ✅

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, WE OFFER AN SPINNER CNC TURNING AND MILLING LATHE. Blodpfezbvthox Ahmon MACHINE IS COMES FROM 1.ST OWNER , MAKING PARTS FOR DOORS, WINDOWS-SMALL PARTS MACHINE COMEST WIT ALL TOOLINGS, BAR FEEDER IS NOT INCLUDED MACHINE WILL BE AWAILIBLE IMEDIATELY DIRECT FROM THE PRODUCTION.

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, total height: 2,290 mm, total length: 5,760 mm, total width: 4,440 mm, overall weight: 5,760 kg, HAAS ST-35 CNC LATHE – ONLY 50 HOURS – LIKE NEW – FULLY EQUIPPED HAAS ST-35 CNC Turning Center in outstanding condition with only 50 operating hours. The machine was purchased for a specific production project and has seen very limited use. It is in excellent mechanical and cosmetic condition and is ready for immediate production. Main Features Programmable Tailstock Chip Conveyor High Pressure Coolant Automatic Tool Presetter (ATP) Haas Next Generation Control (NGC) Ethernet & USB Connectivity Touch Screen Control Work Light Complete documentation Bledpfxezrhinj Ahmon The machine has always been operated in a clean industrial environment and maintained according to Haas recommendations. The machine can be inspected under power in Portugal. Additional photos, videos and technical information are available upon request. Price: €60,000 + VAT

Condition: good (used), Year of construction: 2012, functionality: fully functional, Center distance (mm) 450 Turning diameter (mm) 500 Turning length (mm) 300 Turning diameter (mm) 200 Bar passage (mm) 52 Spindle speed (rpm) 6000 Spindle power (kW) 15-20 Travel in X-axis (mm) 190 Travel in Z-axis (mm) 335 Rapid traverse rate (m/min) 30 Tool positions 12 Tool holder VDI30 Number of turrets 1 Number of driven tools 12 Weight (kg) 3800 Dimensions (L×W×H) (mm) 4260 x 1710 x 1820 Bodpoz At Absfx Ahmoln Spindle hours (h) 20000 Manufacturer DMG Year of manufacture 2012 Control system Siemens 840D sl with ShopTurn

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 550 mm, turning length: 520 mm, turning diameter: 350 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 579 mm, spindle motor power: 18,500 W, total height: 1,700 mm, total length: 3,000 mm, total width: 1,600 mm, overall weight: 4,500 kg, chuck outer diameter: 250 mm, spindle nose: A2-6, bar diameter (max.): 76 mm, controller model: FANUC 18i-TB, Equipment: documentation/manual, CNC turning center with FANUC 18i-TB control. Main spindle with 10" chuck, equiped with subspindle and Live tool (C-axis) Bledpfx Aheyywufjmen max turning diameter ~13.8" (350 mm), max turning length ~20.5" (520 mm), bar capacity ~3.0" (76 mm), and spindle bore ~4.0" (102 mm).

Condition: used, Year of construction: 2023, control SIEMENS SINUMERIK 828D greates pass round over bed 650 mm swing diameter over slide rest 540 mm max. turning diameter 395 mm bar material dia. 67 mm x-axis 235 mm y-axis 105(±52.5) mm z-axis 580 mm Feed ( x / y / z) 24/10/24 mm/min spindle tunring speed 4.500 U/min torque 169,8/89,2 Nm spindle nose A2-6 spindle passage 76 mm spindle bearing diameter 110 mm drive capacity - main spindle 20/10,5 kW spindle tunring speed 6.000 U/min torque 45 Nm spindle nose A2-5 spindle passage 45 mm Bljdpezzrhysfx Ahmsn spindle bearing diameter 90 mm Drive power - sub spindle 7,8 kW number of tool places 12 Pos. shank size for square tool 25 x 25 mm Shank diameter for boring bars 40 mm tool taper BMT 55 Live tool torque (Max./Cont.) 44,4/23,4 Nm total power requirement 49 kVA Overall size ca. 4.130 x 1.752 x 2.085 mm weight of the machine ca. 4.200 kg In our assessment, the machine is in mint condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: like new (used), Year of construction: 2023, Maximum turning diameter 220mm, distance between centres 800mm, swing over bed 240mm, spindle speed 4,000rpm, milling speed 12,000rpm, sub-spindle speed 4,000rpm, Bodpfxsz D Eupj Ahmoln main spindle bar capacity 66mm, sub spindle bar capacity 66mm, 2 X 12 station turrets, spindle power 35Kw, Y axis + /- 45mm, swarf conveyor, coolant., Fanuc 31i.

Condition: excellent (used), Year of construction: 2007, Control system OSP P 200L Swing over bed 530 mm Swing over cross slide 420 mm Max. turning diameter 340 mm Turning length 1000 mm Travel X 260 mm Z 1020 mm C 0.001° Spindle speed (2 ranges) 38 – 3,800 rpm Spindle power 22/15 kW Spindle bore 80 mm Bar capacity 70 mm Number of tools in turret/driven 12/12 VDI 40 Driven tool speed 4,500 rpm Bledpfxoz Hwmce Ahmjn Driven tool power 5.5/3.3 kW Chuck diameter 315 mm Machine dimensions 3310 x 1895 x 1925 mm 6.000kg 3 pcs driven tool holders, 5 pcs fixed tool holders. Chip conveyor, Tailstock with hydraulic locking, Tool measuring equipment,

Condition: excellent (used), Year of construction: 2013, XYZ 1630 SLX CNC Lathe Bedpfx Asz E R N Ujhmoln New 2013. Swing 400mm x 760mm B.C. Spindle speeds & bore 150- 2500rpm & 54mm. C/w 3jaw chuck, quick change tool-post.