Used Bernard Controls Deufra Type Sq10 for sale (68,297)

Condition: used, Year of construction: 2001, center height over bed 500 mm centre distance 6.000 mm bed width 670 mm turning diameter over bed 1.030 mm turning dia. over face-slide 640 mm Max. workpiece weight between centers 5.000 kg Max. workpiece weight between centers (collet) 6.000 kg feed speeds x- and z-axis 6.500 mm/min spindle head ASA 15" spindle turning speed range 4 - 830 U/min Torque 6.224 Nm total power requirement 70 kW weight of the machine ca. 11,3 t Headstock: - Front bearing, inside diameter: 235 mm - Rear bearing, inside diameter: 216 mm - Diameter of hole through spindle: 170 mm - Morse taper in spindle sleeve: 6 MK Gujdezt Szkepfx Abfof Tailstock: - Quill diameter: 150 mm - Quill travel: 400 mm - Quill morse taper: 6 MK Saddle and cross slide: - Torque AC axes drive motors (X and Z): 17/22 Nm - Max. feed force, X and Z (continuously rated): 2500 daN - Recirculating ballscrew diameter X-axis: 40 x 5 mm - Max. travel, X-axis: 650 mm

Condition: used, Radial drilling machine REFORM, type RB 50-16 Year of manufacture: 2002 Drilling capacity in steel: max. 50 mm Tool holder: MK 5 Nominal overhang: 1600 mm Maximum overhang of the spindle to the column: 1600 mm Maximum overhang of the spindle to the column base: 1500 mm Minimum overhang of the spindle to the column: 340 mm Minimum overhang of the spindle to the column base: 240 mm Travel of the drilling head: 1260 mm Height adjustment of the arm: 600 mm Distance between clamping surface and drilling quill: max. 1100 mm Spindle speed: 25-2000 rpm Quill stroke: 300 mm Quill diameter: 80 mm Feed rate: 0.04 to 3.2 mm/rev (16 steps) Clamping surface of the base plate: 1750 x 980 mm (1650 x 840 mm) Column diameter: 350 mm Motor power, spindle drive: 4 kW Mains connection: 400 volts, 50 Hz - Spindle speed controlled via 16 gear stages with speed preselection and hydraulic gear shifting - Right and left rotation of the drilling spindle - Automatic feed via 16 gear stages with feed rate preselection and hydraulic gear shifting Gedpozupamofx Abfeuf - Electro-mechanical height adjustment of the arm, with hydro-mechanical arm clamping - Hydro-mechanical central clamping of the head and column via push buttons - Coolant system in the machine base Machine height with drilling head at the top: max. 2840 mm Space requirement L x W x H: 2400 x 1000 x 2650 mm Weight: 3.5 tons Good condition

Condition: good (used), Year of construction: 2007, Pinacho CNC lathe, Rayo 180 model, built in 2007, with Fanuc control. Distance between centers: 750 mm, turning diameter: 360 mm, chuck diameter: 200 mm, bed width: 250 mm, main spindle bore: 42 mm, speed range: 100 to 4,000 rpm, motor power: 5.5 kW, automatic 8-tool turret. Guedsv T Tvyspfx Abfjf

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Guodpfx Abevzln Rjfof Special chuck is available

Condition: good (used), CNC control, operator panel, logic unit, path control Gedpfeztvqisx Abfouf -Manufacturer: Heidenhain, logic unit path control from CNC machining center Mikron VC500D -Type: LE 407 A 264 430 99 -Individual components: see photos -Dimensions: 475/325/H140 mm -Weight: 9.4 kg

Condition: good (used), CNC control, operator panel, logic unit, path control -Manufacturer: Heidenhain, logic unit railway control -Type: LE 407 A 236 484 10 -Individual components: see photos Gujdpfopz Sf Ejx Abfsf -Dimensions: 480/330/H140 mm -Weight: 9.5 kg

Condition: ready for operation (used), Bosch stator for SE-LB3.000 servo motor, serial number 471, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gjdpfx Abszt H D Hofouf

Condition: ready for operation (used), Bosch rotor for SE-LB3 .000 servo motor, serial number 471, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Godpfx Aszt H Dysbfeuf

Condition: ready for operation (used), Rexroth MDD071C-N-060-N2S-095GB0 Permanent Magnet Motor, without encoder, serial number 4226, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gjdpozt H D Tjfx Abfsuf

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: serie nr 3149, overall weight: 11,800 kg, total width: 6,615 mm, total length: 8,890 mm, total height: 2,050 mm, spindle diameter: 50 mm, type of input current: three-phase, space requirement length: 16,000 mm, space requirement width: 8,000 mm, milling spindle length: 650 mm, compressed air connection: 8 bar, spindle speed (min.): 3,500 rpm, spindle speed (max.): 3,500 rpm, length stop: 3,450 mm, input voltage: 125 V, power: 65 kW (88.38 HP), main saw diameter: 450 mm, corner unit for window and door frames, including tools. controlled from the office (Groeneveld). interpolation (angled pins). barcode laser. return transport. documentation available. complete sets of spare blades/saws, including router bits, linked to Groeneveld. automatic counter-piece. maximum workpiece length 6000. sticker printer for barcode. automatic waxelite pump. automatic central lubrication. connections for pin holes and counter-molds. automatic length stop and rotation for workpieces. including extraction pipes with automatic valve. thicknesses from 38 to 150 mm. Gsdpfx Abeztptqefouf pin bank: 1x saw blade 40mm. 2x pin shaft 50x650. 2x edge breaker 30x40. router: 1x rounding router 30x40. 3x router bits 50x600. machine can be picked up here; in conjunction with Bos Machines (dismantling and transport not included in the price). price excludes VAT.

Year of construction: 2015, condition: excellent (used), Very well-maintained Kek Kemutech Gardner K650 C. Gjdpfxoyy N U Rj Abfsuf Includes platform, valve housing, and magnet. 1 unit available.

Condition: good (used), Year of construction: 1998, Circulation/rotation Ø over bed 475 mm Rotation/rotation Ø via cross slide 260 mm Sledge path plan 260 mm centre distance 1500 mm Guodpfewgn Agsx Abfsf power capacity 22 kW Gear stages. m= manual / e= electric. 2 e Spindle head DIN 55026 / DIN 55027 A6 / 6 Spindle Ø in front bearing 115 mm spindle bore 78 / 70 mm turning speed range (V-constant) 1 - 3.000 U/min feed range flat 1µ - 1.000 mm/U feed range lengthwise and thread 1µ - 2.000 mm/U Rapid traverse plan/longitudinal 5 / 10 m/min diameter of quill 70 mm quill travel 120 mm quill inner cone 5 MK This machine is used for the production of individual parts and small batches from simple to the most complex contours. It is characterised by: --> Ease of operation Precision Working range

Year of construction: 2016, condition: ready for operation (used), A high-temperature water temperature control unit for injection molding tools, extrusion systems, die-casting tools and industrial temperature control processes up to 200°C is offered. Temperature range: 0°C to 200°C, circulating medium: water, heating capacity: 45kW, cooling capacity: 120kW, filling volume main unit: 32l, filling volume valve unit: 2l, weight: approx. 300kg, dimensions X/Y/Z: approx. 700mm/900mm/1900mm, weight of the valve unit: 37kg. Equipped with control via touch-screen visualization, separate control cabinet and external valve unit for high-temperature applications. Documentation available. Inspection possible by appointment. Godezfp Huspfx Abfouf

Year of construction: 1996, condition: ready for operation (used), A complete liquid egg and egg product pasteurization plant by Südmo/KMA is available. Main processes: egg breaking, filtration, pasteurization, cooling, homogenization. 1) Sanovo Type 3000 egg breaking machine, year of manufacture: 1991. 2) Südmo/KMA K21-FS/4235 pasteurization plant, year of manufacture: 1996, medium: liquid egg, throughput: 1500l/h, temperature profile: 15°C/64°C/6°C, cooling medium: ice water, ice water temperature: 1°C, ice water demand: 7500l/h, heating medium: hot water, hot water temperature: 65°C, hot water demand: 5000l/h, heat recovery: 70%, holding time: 360s. 3) APV Gaulin homogenizer. 4) Terlet process tank, volume: 10m³. 5) Clivet WSAT-XIN 30.2 water chiller, year of manufacture: 2018, refrigerant: R-410A, refrigerant charge: 9kg. Including pumps, agitators, tanks and additional accessories. Documentation available. An on-site inspection is possible. Guedpfxozidh Ie Abfof

Year of construction: 1988, condition: ready for operation (used), A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible. Guedpfx Absvmq Tiofof

Year of construction: 2007, condition: ready for operation (used), Max. turning diameter: 12mm, max. turning length: 200mm, rated current: 40A, mains voltage: 200V, connected load: 8kVA, weight: 2.1t, with sub spindle, driven tools. An on site inspection is possible. Gusdpfx Abszcfhksfef

Year of construction: 2000, condition: ready for operation (used), Controls: Mitsubishi, weight: 2.2t. Equipment: main spindle with guide bush system, counter spindle, two C axes, several driven tools, front machining and rear side machining, tool block for cross machining, automatic parts catcher, bar feeder connection, tool cabinet with original setting tools, spindle monitoring EWL 4444, high pressure coolant supply, extraction connection. An on site inspection is possible. Guodpfxezcfh Rj Abfof

Condition: ready for operation (used), Travel X/Y/Z: 1400mm/1000mm/1000mm, table dimensions X/Y: 1600mm/850mm, max. table load: 2500kg, speed: 4000rpm, spindle power: 22kW, feed: 20m/min, spindle taper: ISO50. Machine dimensions X/Y/Z: approx. 4300mm/2500mm/2600mm, weight: approx. 10000kg. An on-site inspection is possible. Gsdpfx Ajy Hk Ulebfeuf

Condition: ready for operation (used), Year of construction: 2022, Stitch type: double lockstitch, number of needles: 2, max. stitch length: 12mm, sewing speed: 2500stitches/min, presser foot lift height: 9mm, clearance A/B: 10mm/20mm, needle spacing range: 3mm-30mm, needle system: 134-35. Machine dimensions X/Y/Z: approx. 1100mm/600mm/1700mm, weight: approx. 75kg. On-site inspection is possible. Guodjyg Nvgspfx Abfof

Condition: ready for operation (used), Year of construction: 2020, Cooling output: 420kW, connected load: 7.1kVA, weight: 4.9t, with Cooling Tower Baltimore Aircoil International TXV 237R and Desalination Control System Chemie + Wasser Lohbeck DS6, with documentation, an inspection is possible. Guodpfxou Rn Ago Abfsf

Year of construction: 2000, condition: ready for operation (used), Controls: Mitsubishi, weight: 2.53t. Equipment: counter spindle, tool turret with driven tool stations, linear slide with driven tools, bar feeder interface, tool set and setting tools, spindle monitoring EWL 4444. An on site inspection is possible. Guodjzcfhqspfx Abfsf

Year of construction: 1979, condition: ready for operation (used), Components: headstock, main spindle, faceplate flange, taper, table, guideway, longitudinal guide, cross guide, tailstock, workpiece holder, tailstock taper, workpiece spindle. With documentation and records. An on-site inspection is possible. Gujdpfsyln Dtsx Abfsf

Condition: ready for operation (used), Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible. Gedpszukt Ijfx Abfjuf

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm Gedpfxjwdta Ej Abfeuf y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 650 mm, spindle bore: 106 mm, turning length: 2,130 mm, turning diameter: 650 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 4,290 mm, total width: 2,553 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 11,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 400 V, drill spindle diameter: 106 mm, nominal power (apparent): 20 kVA, number of spindles: 1, spindle nose: A1-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 119,500.00!!!!! The machine is immediately available and NEW. Delivery of the machine in overseas packaging from our warehouse. (Transport of the machine at the buyer’s expense) Operating materials to be provided by the buyer. Commissioning and training by Milltronics: EUR 5,000.00 Leasing possible (subject to creditworthiness) Machine Details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automatic sequences • Custom macros available • Override potentiometers for axes and spindle • Spindle load monitoring • Key switch to lock EDIT function • Lights to indicate operating status Guodpfx Asztrkljbfsf • Additional “M” function with CNC wait channel • Constant cutting speed • Rigid tapping • Spindle speed 30 – 1,600 rpm • Spindle motor 18 / 11 kW, 2-stage electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 positions 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One tool holder for boring bars 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list and circuit diagrams in digital format • Operating manual and maintenance manual in digital format • Transformer for standard industrial power supply 400 volts, 3 phase • Lifting brackets for crane transport Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in combination with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Travelling steady rest with brass pads, range 20 mm - 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Foot mat with Milltronics logo