Used Bizerba Glm-I 150 for sale (60,285)

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 1,820 h, load capacity: 15,000 kg, lifting height: 1,980 mm, free lift: 1,980 mm, fuel type: diesel, mast type: simplex, construction height: 3,450 mm, fork carriage width: 1,800 mm, fork length: 1,400 mm, empty load weight: 23,000 kg, total length: 3,860 mm, drive type: Diesel, construction width: 1,800 mm, Compact forklift – Diesel Load center: 600 Blodszwh D Nspfx Aqwel Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Bandage Front tire size: 40x16x30 Rear tire type: Bandage Rear tire size: 28x12x22 Description: In addition to this autumn model, we have approximately 200 heavy-duty forklifts, compact forklifts, and reach trucks in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-purchase and financing options are available at favorable terms. We would also be happy to purchase your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this ATAIR IV D150CV. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We will also gladly offer your vehicle for sale on consignment in our showroom. Side shifter, fork positioner, Heater, soot filter, full cabin, full free lift.

Condition: used, Year of construction: 2007, 2007 Extrude Hone OrbiTEX 150 Orbital Abrasive Flow Polishing & Finishing Machine With Advantech Controls Control Bodpfx Aqjzt N Dpowjll Maximum Workpiece Ø198mm, Maximum Workpiece Length 300mm. Voltage 400V. S/No. ORB06-1451 (2007). Weight 2,100kg.

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY VC 650/150 Tech injection molding machine ENGEL ERC 13/1-F robot – SET 1 Year of manufacture: 2005 Clamping unit design: ENGEL tie-bar-less Clamping force: 1,500 kN / 150 t Control system: ENGEL CC200 – color touchscreen Injection unit: 650 Screw diameter: Ø45 mm Screw stroke: 200 mm Screw L/D ratio: 20 Injection volume: 318 cm³ Injection shot weight: approx. 290 g PS Maximum injection pressure: 2,040 bar Maximum screw speed: approx. 315 rpm Bodpfxozxqyco Aqwoll Maximum injection flow rate: approx. 179 cm³/s Mold opening stroke: approx. 500 mm* Maximum distance between platens: approx. 700 mm* Nozzle stroke: 350 mm Nozzle clamping force: 67 kN Cylinder heating power: approx. 13.3 kW Number of heating zones including nozzle: 5 Hopper capacity: approx. 80 l Machine weight: 9,500 kg Robot: ENGEL ERC 13/1-F Robot manufacturer: ENGEL Robot year of manufacture: 2005

Condition: good (used), functionality: fully functional, mileage: 125,000 km, power: 110 kW (149.56 HP), first registration: 07/2011, fuel type: diesel, color: white, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, Used truck ISUZU M 50 C 150 3-sided tipper, year 2011, engine 3000 150 hp, automatic transmission, tipper body length 3,300mm, wheelbase 2,500mm. total length of the truck 5,100mm, total weight 5000 kg (C license), payload 2,500 Kg, air conditioning, ABS, Euro 5, 70% tires, mechanical spring suspension, electric mirrors + windows, radio, Km 125,000, good condition. INFO ENG: Used truck ISUZU M 50 C 150 3-sided tipper, first registration 2011, engine 3000 150 hp, automatic transmission, tipper body length 3,300mm, wheelbase 2,500mm. total length of the truck 5,100mm, total weight 5,000 kg (license C), payload 2,500 kg, air conditioning, ABS, Euro 5, 70% tyres, mechanical leaf spring suspension, electric mirrors + windows, radio, 125,000 km, good condition. Bodpfeuiyalex Aqwsll

Condition: new, Year of construction: 2026, Heavy-duty machine stand guarantees high torsional rigidity and vibration-free operation. Improved sanding results through sanding belt oscillation via a separate geared motor. Oscillation can be switched on or off as desired. Veneer edge sanding device with fine adjustment included as standard. Grooved infeed guide rail for sanding veneer overhangs. Quick changeover from veneer to solid wood sanding. Height-adjustable sanding table to utilize the full sanding belt width. Height adjustment of the sanding table and swiveling of the sanding unit via handwheels. Height-adjustable auxiliary table with dust extraction for sanding radii. Optimal chip removal through dust extraction at the unit and the cross table. Automatic compensation of belt length differences through spring-loaded belt tension. Dimensions and weights Length approx. 1900 mm Width/Depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Dust extraction nozzle diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Power consumption 3 kW Bedoff Ed Topfx Aqwoll Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Swivel range 0 – 45 ° Oscillation stroke 20 mm Availability: Short-term

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 90° right 610-550 with 2x straight piece RA1282 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Length straight frame: 1 x 300 mm + 1 x 150 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.37 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 110kg Scope of delivery: with supports 670 mm total high Bledpjk Aa Ryefx Aqwjl Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 1996, Transnorm curved belt conveyor right 150°-780-600-IR600 RA2002 Technical data: Manufacturer: Transnorm Year of manufacture: 1996 Condition: good (used) Motor: will be changed Bledpfjk Abr Sex Aqwjl conveying angle: 150° nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1996, Transnorm curved belt conveyor left 150°-780-600-IR600 RA2017 Technical data: Manufacturer: Transnorm Year of manufacture: 1996 Condition: good (used) conveying angle: 150° nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: will be changed Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Bjdsk Abubepfx Aqwsll Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, all stainless steel nett width 600 mm 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 power: 2 x 0,95 kW Grill opening: dia. 14-22 mm dimensions : ± 2.700 x 1.400 x 1.000 mm Blodpfx Aezvbyzsqwsl

Condition: new, empty load weight: 108 kg, maximum load weight: 642 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 1,475 mm, loading space width: 1,063 mm, loading space height: 300 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Car trailer Garden Trailer 150 KIPP with tiltable drawbar with a maximum permissible total weight of 750 kg. Here below we offer a brand new type of our former model Garden Trailer 150. As UNITRAILER we offer you a versatile trailer with a very good price-performance ratio. If you want to buy a new car trailer in our store, you do not have to worry about documents. During the order process, we will provide you with an invoice, EC certificate of conformity, vehicle registration document, assembly instructions, warranty book (2-year warranty) and our certificate. All you need to drive this trailer is a car with a hitch and a class B driver's license. You do not need any additional training or qualifications. You can easily register the trailer at your nearest registration office in Germany and Austria. Bsdpfet I Erxox Aqwoll Why Garden Trailer 150 KIPP? -Open tailgate makes loading and unloading goods quick and convenient -The wheels on the side of the loading area provide excellent driving characteristics - no bouncing or rocking -Plastic mudguards are stable and do not rust, so they can be used for much longer than metal mudguards. All components used in the trailer come from reputable manufacturers -Delivery to your home or company without you having to leave your home. The trailer is delivered directly to the specified location, together with the registration documents.

Condition: new, empty load weight: 104 kg, maximum load weight: 646 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 1,526 mm, loading space width: 1,116 mm, loading space height: 777 mm, loading space volume: 1.8 m³, tire size: 13, wheelbase: 155 mm, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004173 Bledpeir H Sbjfx Aqwjl Low-loader garden trailer 150 with high drawbar and high cover for cars, 150 x 106, 750kg This low-loader with high drawbar and high cover can be connected to any car with a class B driver's license. The low-loader has a tilting drawbar, which makes loading and unloading of goods, especially bulk goods, easier. The compact size of the loading area (150x106 cm) makes maneuvering with the low-loader attached to the hitch a breeze. Larger purchases, new furniture, or household appliances or consumer electronics will no longer be a challenge for you if you have a low-loader. If you buy a low-loader with a high drawbar and high cover from UNITRAILER, you will receive the following: * Fully foldable drawbar to store it on the rear panel in a low garage or under the house * Vehicle with very comfortable loading and unloading of goods, which is made possible by tilting the loading area * GVM documents adapted to your vehicle * Simple and problem-free registration process thanks to all the necessary documents - invoice, EC certificate of conformity, vehicle registration document, warranty booklet (2 years warranty) and our certificate * Possible additional equipment - support wheel, additional side panels, anti-theft device * Support from our experts, who are happy to answer any questions you may have. Possibilities of the low-loader Garden Trailer 150: * Storage on the rear panel - the low-loader in a vertical position takes up very little space, and the folded drawbar means that it does not need a high ceiling * High cover with high drawbar 80 cm - protect the load from rain, snow, wind and sun and ensure safety in all seasons * Mudguards made of plastic - very high durability without corrosion * GVM values up to 750 kg - loading area of the low-loader with compact dimensions * Corrosion resistance - made of galvanized sheet steel ensures the long-term corrosion resistance of all metal elements used in the low-loader * Transport independence - you can carry what you want and where you want, without having to rent a car or damage your own car Delivery costs will be charged separately.

Condition: new, empty load weight: 118 kg, maximum load weight: 632 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 1,475 mm, loading space width: 1,063 mm, loading space height: 700 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Car trailer New Garden Trailer 150 KIPP with additional drop sides, support wheel and gray flat cover New Garden Trailer 150 KIPP trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. The ordered goods with enclosed documentation will be delivered to the address you specify in Germany/Austria within 6 to 8 working days. Once you have received the car trailer, all you have to do is register it. Advantages of a Garden Trailer 150 KIPP car trailer Bjdot Id Skjpfx Aqwjll If you decide to purchase our new car trailer, you will receive a 2-year warranty. Each product comes with a user manual and a warranty booklet. All the most important documents come with the purchased trailer. In addition, you can purchase accessories in the form of drop sides, support wheels or anti-theft protection at any time. If you have any questions or doubts while using the car trailer, you can contact our specialists at any time. You can also use the tiltable drawbar to tilt your car trailer. This makes loading and unloading goods that you would normally have to lift or lower much more convenient. This solution is also most commonly found on more expensive car trailers, which contributes significantly to a better user experience. Another advantage of this solution is that the car trailer can be stored vertically, with the folded drawbar resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in your garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or wherever you want!

Condition: new, Year of construction: 2026, spindle bore: 38 mm, turning diameter: 178 mm, turning diameter over bed slide: 300 mm, center height: 178 mm, center width: 914 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,700 mm, total width: 750 mm, total height: 1,270 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, quill mount: MK 3, incl. 3-axis position display incl. RÖHM lathe chuck incl. quick-change toolholder 'set', Multifix system Blodpfx Ajy Iy H Hjqwsl for further details see data sheet ELMAG warranty: 3 years (upon online registration after purchase) Delivery throughout Germany: FREE OF CHARGE NOT THE RIGHT MACHINE? WE ARE AN ELMAG AUTHORIZED PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE ELMAG RANGE! REQUEST A QUOTE!

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h Bjdpfx Ajzvz Tbeqwjll - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: good (used), Technical data for the pallet racking beam: Racking system: Stow Type: Pal Rack NS The beams have 2 holes each on the top, bottom, and front, with a diameter of approximately 16 mm. These are used for the diagonal bracing. Included in the scope of delivery: 01x Pallet racking beam, used Material color: orange Bjdelgzqcepfx Aqwoll U-profile: 150 x 50 x 3.00 mm Design: End beam Agraffe: 4 HK (hooks) Clear width: approx. 1,400 mm 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting out General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 2003, operating hours: 2,180 h, * Unladen weight: 7,090 kg * Power: 3.6 kW * Year of manufacture: 2003 * Working height: 15 m * Electric drive -----Internal vehicle number: 10013----Subject to errors and prior sale. WhatsApp support available! If you have questions about the vehicle or for further information, feel free to contact us conveniently via WhatsApp. Bedpfx Aqeumrvbowjll WhatsApp WhatsApp

Condition: used, functionality: fully functional, machine/vehicle number: B40400693, Year of construction: 2019, operating hours: 8,037 h, load capacity: 16,000 kg, lifting height: 4,000 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,695 mm, power: 160 kW (217.54 HP), fork carriage width: 2,500 mm, fork length: 2,500 mm, drive type: Diesel, Heavy Duty Forklift - Diesel Bsdozwrgzspfx Aqwell Chassis Number: B40400693 Load Center: 600 mm Fork Width: 250 mm Fork Thickness: 100 mm Mast Type: Duplex Condition: Refurbished with Warranty Technical Condition: Very Good Front Tyres Type: Pneumatic Front Tyres Size: 12.00 x 20 Front Tyres Condition: New Rear Tyres Type: Pneumatic Rear Tyres Size: 12.00 x 20 Rear Tyres Condition: New Description: TOP CONDITION!!! - COMPLETELY OVERHAULED by KALMAR!!! Only 3,500 mm wheelbase (250 mm shorter than a DCG 160-12), as this unit is a DCG 150-12 upgraded to a 16,000 kg lifting capacity!!! Sideshifter, fork positioner, third valve, fourth valve, fork positioner with sideshifter, fork carriage with central level adjustment, width B = 2,500 mm, Kalmar comfort cabin with air conditioning and radio, central lubrication system for mast and steering axle, road traffic approved lighting, LED headlights front and rear, as well as on the mast, front camera. THE LIFT MAST IS FACTORY NEW!!!

Condition: used, mileage: 4,500 km, power: 110 kW (149.56 HP), first registration: 04/2026, fuel type: diesel, overall weight: 2,830 kg, color: white, gearing type: automatic, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Your direct contact: Andreas Kawa, Head of Sales, Commercial Vehicles – Phone: | Email: Special equipment: Trailer coupling, removable without tools Reinforced LED cargo area lighting (5W + 10W) Cargo area floor protection made of wood (9mm, non-slip) CONNECT PACK LED headlights, LED daytime running lights WINTER PACK Partition wall, glazed and insulated Double passenger seat incl. Moduwork COMFORT PACK Additional equipment: Airbag driver/passenger side, audio controls on the steering wheel, RCC DAB audio system (radio/CD player, MP3 compatible), double passenger seat, on-board computer, parking assistance system (rear), driver assistance system: emergency call and assistance system (CITROEN Connect), rear hinged doors without glazing, body/superstructure: van, steering column (steering wheel) mechanically adjustable in height/length, headlight range adjustment, engine 2.0 L - 106 kW Blue-HDI FAP, safety package, low emissions according to Euro 6d emission standard, halogen headlights, sliding door on the right side without window, SCR system (AdBlue technology), front left seat adjustable in height, seat cover/upholstery: fabric Curitiba, stop-start system Errors, changes, and interim sales: The information regarding the equipment provided in this advertisement does not constitute a guaranteed characteristic in the legal sense and serves solely for general information purposes. Binding equipment features are exclusively subject to the purchase contract. Blodpeyxuw Uefx Aqwel SAMPLE PHOTOS

Condition: ready for operation (used), TRUMPF 150 MQ VIS focusing optics SN:1277242-00769 + SN:1277243-00865, used, normal signs of use, 100% functional, scope of delivery as per photos. Bodszu Hlmopfx Aqwjll

Condition: ready for operation (used), Trumpf 150 MQ VIS focusing optic 22-43-69-00, used, in good condition, 100% functional, scope of delivery as per photos. Bodpfozu Hltjx Aqwoll

Year of construction: 2015, condition: ready for operation (used), machine/vehicle number: Nº 6 Y Nº 7, Equipment: CE marking, WINDLASER LS1626 Plus 150 W Industrial CO₂ Laser Machine Approximate working area: 2,600 × 1,600 mm – Complete equipment, ready for production Unit price per machine: €7,900 + VAT For sale: WINDLASER LS1626 Plus 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before dismantling. The machine is being sold exclusively due to a technological upgrade, following the introduction of new, state-of-the-art RF industrial laser equipment. It is equipped with a professional Ruida DSP controller, RDWorks software, and comes with a computer, fully configured for immediate operation. Its large working area of approximately 2,600 × 1,600 mm allows for the comfortable machining of entire MDF, HDF, plywood, acrylic, cardboard, leather, foams, rubbers, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube, and is also supplied with a brand new 150 W RECI laser tube, providing the buyer with a significant reduction in future maintenance costs. Included equipment The price includes: • WINDLASER LS1626 Plus 150 W industrial laser machine. • Approximate working area of 2,600 × 1,600 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • S&A CW-6000 industrial chiller. • Installed and functioning RECI 150 W laser tube. • Brand new RECI 150 W replacement laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. _____ Materials that can be processed Ideal for cutting and engraving: • MDF • HDF • Plywood • Acrylic (PMMA) Bedpfjzmqa Ejx Aqwoll • Cardboard • Leather • Rubber • Technical foams • Non-metallic plastics • Other materials compatible with CO₂ laser technology A purchase with guarantees The machine can be seen in operation before dismantling. The buyer can personally verify its operation, precision, speed, and cutting quality, acquiring industrial equipment ready to continue producing from day one. _____ More than just a used machine It is delivered as a complete industrial production system, including strategic spare parts and high-value accessories that significantly reduce future maintenance costs, minimize the risk of production downtime, and allow you to start manufacturing from day one with complete confidence.

Year of construction: 2008, condition: used, A Demag all-electric injection molding machine with Wittmann 3-axis robot and safety enclosure is offered. Clamping force: 1500kN, locking force: 1650kN, max. mold opening stroke: 495mm, min./max. mold height: 275mm/585mm, max. distance between mold platens: 1080mm, mold platens X/Y: 770mm/770mm, clear distance between tie bars X/Y: 520mm/520mm, max. mold weight: 1700kg, max. mold weight on the movable mold platen: 1150kg, ejector stroke: 125mm, ejector force: 35kN, ejector retraction force: 35kN, screw diameter: 35mm, L/D ratio: 20, max. injection pressure: 2430bar, stroke volume: 166cm³, shot weight: 146g, max. metering stroke: 173mm, max. nozzle stroke: 400mm, nozzle immersion depth: 20mm, nozzle contact force: 30kN, installed barrel heating capacity: 9.4kW, material hopper capacity: 35l, control: CDIAS, operating hours: approx. 76000h, machine weight: approx. 7400kg. Including WITTMANN 3-axis robot, year of manufacture: 2006, travel X/Y/Z: 550mm/1200mm/2000mm, robot weight: approx. 240kg as well as safety enclosure and 1 × core pull preparation AS. Documentation available. An on-site inspection is possible. Bjdpezvginofx Aqwjll

Condition: used, functionality: fully functional, Micro and mini plasma welding generator, complete with torch and power cables. Blodpfx Aqjzlud Eswjl Suitable for welding stainless steel with thicknesses ranging from 0.5 to 1.00 mm. Power supply: 380-41.5V (12A). Maximum welding current: 150A, with a welding speed of 5 to 10 mm/sec.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Very precision machine nearly no used after purchasing. Blsdpfx Aqozvh Ekswol

Condition: used, Year of construction: 2013, 1 unit of W.Z. DYNAMIK 150 metal belt grinder on a pallet Color: as shown in the images, according to the pictures and inspection Year of manufacture: 2013 Condition: used Location of the goods: Production Hall 2 Payment method: prepayment by bank transfer Shipping: Self-collection only from the Osterburken location Bedjzvdbzepfx Aqwell