Used Blohm Profimat Mc 610 S for sale (70,460)

Condition: new, total length: 5,540 mm, Year of construction: 2023, load capacity: 18,000 kg, - Funkfernbedienung für alle Kran- und Auslegerbewegungen. Falls vorhanden auch Bewegungen von hydraulischen Anbauteilen - Vorderachse Antrieb mit Gegenläufer Bewegung - Abnehmbare Kontergewichte - Proportional ausfahrbarer hydraulischer Ausleger - Frontabstützungen - Vorderradantrieb Nr. 2 Elektromotoren AC 8,5 kW 80V. Isolationsklasse H - Eigengewicht 21.610 kg Iisdpfxjy Hxwbs Ab Nob - Abnehmbare Kontergewichte 6.110 kg - Batterie: 96 V - 1.035 Ah - Gewicht Batterie: 3030 kg - Reifen: Vorne: Nr.4 superelastich 355x50-20” / Hinten: Nr.2 superelastich 355x50-20 - Reifen Hersteller: Trelleborg - Farbe: grau - Lenkung: über die Hinterachse / Lenkwinkel 90°/90 - Elektronische Lastbegrenzung - Automatisches Bremssystem an allen Rädern - Hergestellt aus vorgefertigten und verschweißten Stahlplatte - Auslegerwinkel +65°/-6° - Elektromotor N° 2, 23 kW - 96 V AC, 16 kW - 96 V Isolationsklasse - Radstand: 3100 mm - Bodenfreiheit Mitte: 170 - Höhe Kabine: 2100 mm

Condition: used, machine/vehicle number: 005711, Max. panel width: 4500 mm Max. panel length: 2200 mm Main saw blade projection: 95 mm No of Rip saw Grippers: 5 No of Cross Cut Grippers: 8 Second flexible pusher: yes Isdpfxjy Nk Dfe Ab Neib

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 368 h, Equipment: cabin, front power take-off, front-end loader, lighting, For sale: Claas Arion 610 Hexashift Stage V agricultural tractor in the CIS version, type A96 100. Year of manufacture: 2022, operating hours: 368. The tractor is practically like new, very little used, fully functional, immediately ready for use, and requires no further investment. Equipped with a six-cylinder John Deere DPS engine with 6.8 l displacement, compliant with the Stage V emission standard (SCR, DPF, DOC, AdBlue). Maximum output of 145 hp, rated output of 135 hp, homologated at 139 hp. Hexashift 24/24 transmission without creeper gears, featuring electrohydraulic power shuttle and automatic powershift. Maximum speed 40 km/h. Four-wheel drive (4x4), differential lock, PROACTIV front axle suspension. Load-sensing hydraulics providing 110 l/min, four spool valves (2 mechanical, 2 electrohydraulic). Rear linkage Cat. III, PTO: 540 / 540 ECO / 1000 / 1000 ECO. No front PTO. Claas front linkage with 3.0 t lifting capacity and suspension fitted. Reinforced chassis for front loader. ALO Quicke Q6M front loader with shock absorption, quick coupler, Euro frame, bucket, and pallet fork. Suspended cab, air conditioning, air-suspended seat, CIS terminal with color display, Bluetooth radio with hands-free function, complete work lighting. Standard roof (without skylight). Tyres: front 480/70 R28 Mitas, rear 580/70 R38 Mitas – excellent condition. Inspection and collection in Germany possible by prior arrangement. Ijdsy E Ndiepfx Ab Njib

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 5,000 rpm, bar diameter (max.): 26 mm, total width: 2,200 mm, total height: 2,200 mm, travel distance X-axis: 78 mm, travel distance Y-axis: 210 mm, overall weight: 2,900 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D with EMCO specials, number of axes: 4, This EMCO Turn 420 MC Plus was manufactured in 2005. It features a maximum turning diameter of 100 mm and a maximum part length of 600 mm. The machine is equipped with a powerful spindle speed range of 0–5000 rpm and a tool changer with 24 stations. If you are looking to get high-quality turning capabilities, consider the EMCO Turn 420 MC Plus multi-spindle turning machine we have for sale. Contact us for further details. • Condition: Very good; connected and ready for testing • Tech specs: • Swing above slide: 160 mm • Main spindle to counter-spindle: 408 mm • Max. turning diameter: 100 mm • Max. part length: 600 mm • Max. bar-stock diameter: 26 mm • Travel: • X/Z: 78 mm • Main spindle: • Max. torque: 38 Nm • Spindle adapter: 70 h5 • Spindle bearing (front ID): 60 mm • Spindle bore: 38 mm • Counter-spindle: • Speed range: 0–5000 rpm • Torque: 38 Nm • Spindle adapter: 70 h5 • Spindle bearing (ID): 60 mm • Clamp length (Ø26 mm): approx. 100 mm • Travel (Z2): 233 mm • C-axis: • Resolution: 0.001° • Rapid traverse: 1000 rpm • Positioning: 3° • Drive power: • Power: 9 kW • Tool changer: • Tool stations: 2 × 12 • VDI shaft: VDI 16 • Tool size (square): 16 × 16 mm • Boring bar diameter: 25 mm • Indexing time: 0.4 sec • Driven tools: • Speed range: 0–5000 rpm • Max. torque: 3 Nm • Max. power: 1.6 kW • Number of tools: 2 × 4 • Feed drives: • Rapid traverse X/Z; X1/Z1: 12/20 m/min • Feed force X: 3000 N • Feed force Z: 3000 N • Acceleration time: 0.1 sec • Coolant system: • Tank capacity: 200 L • Pump power: 0.57 kW • Power consumption: • Connected load: 15 kVA • Supply pressure: 6 bar • Supply rate: 300 L/h • Dimensions: • Center height (top/bottom): 1179 / 1030 mm • Footprint (W × D): 2200 × 1386 mm Additional equipment • Set of accessories and tool holders included Ijdpfx Aoy E Sp Uob Neib Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, Year of construction: 2026, neu 2026 070217 Juni 2026, Zwischenverkau Türkei 4800 € 500 kg 1200 mm 400 mm 550 mm 300 mm 50 mm 80 mm 0.55 kW 1400 mm 1200 mm 1550 mm 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times Iiodpswirz Ssfx Ab Njb photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 19100 € 366.72 € 4000 kg 1300 mm 450 - 550 mm 600 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times Iedpfxjwirz Eo Ab Noib photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 8200 € 158.26 € 1250 kg 1300 mm 450 - 550 mm 400 mm Iijdpfx Abewirp Ae Neb 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: ready for operation (used), Year of construction: 1997, Travel X/Y/Z: 1600mm/400mm/350mm, quill stroke: 350mm, max. workpiece weight: 2100kg, table dimensions X/Y: 2100mm/430mm, table height: 908mm, tool positions: 78, tool holder: SK40, max. torque: 70Nm, rapid traverse: 30m/min, feed force: 7kN. Machine dimensions X/Y/Z: approx. 4700mm/2950mm/2700mm, weight: approx. 9300kg, control: Siemens 840C. The spindle of the machine must be overhauled and was removed as well. Documentation available. An on-site inspection is possible. Ijdpjy E S Ecsfx Ab Nsib

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Iiodpfx Absy Ehrxo Nob Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 12100 € 232.32 € 2500 kg 1300 mm 450 mm 550 mm 600 mm 50 mm 80 mm Iijdpfxowirqao Ab Nob motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (PRICES ON REQUEST): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 11800 € 226.56 € 2500 kg 1300 mm 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times Iodpfx Abswirp Ne Neib photoelectric proximity ensor SICK for sag control ALTERNATIVES (PRICES ON REQUEST): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: excellent (used), Year of construction: 1990, Coordinate Measuring Machine MC 850 08/12/06 UHING Year of manufacture: 08/1990 Control: C98 Data system: Unix Workstation B2000 Dongle available: no Software: UMESS Unix 8.21 Iisdpfxsy Hrbyo Ab Nob

Condition: ready for operation (used), Year of construction: 2000, operating hours: 2,981 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,035 mm, spindle motor power: 18,500 W, overall weight: 5,600 kg, controller manufacturer: FANUC, controller model: MSG-501 MAPPS, number of axes: 3, This 3-axis MORI SEIKI SL-253B MC/1000 was manufactured in 2000. It features a maximum turning diameter of 260 mm and a turning length of 1,035 mm. The machine is equipped with a spindle speed range of 35–3,500 RPM and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-253B MC/1000 horizontal turning machine we have for sale. Contact us for further details. • Max turning diameter: 260 mm • Max turning length: 1035 mm • Spindle nose/bore: JIS A2-8 / 86 mm • Bar capacity: 74 mm • Rapid traverse (X/Z): 18 / 24 m/min • Live tooling (BMC): 3,000 RPM / 6.5 kW • Tailstock: MT 5, 150 mm stroke • Control: MSG-501 MAPPS (Fanuc) • Turret: 12 station VDI 40 Technical Specification Iodjy D Rnyepfx Ab Noib Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2014, machine/vehicle number: 9911832, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 10,600 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 740 mm, total height: 2,760 mm, total length: 11,900 mm, total width: 4,500 mm, overall weight: 10,500 kg, spindle motor power: 10 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 60 m/min, spindle nose: HSK F63, tool diameter: 20 mm, tool length: 150 mm, tool weight: 3,000 g, Equipment: chip conveyor, documentation/manual, MECAL MC302 GEOS-5 5-AXIS MACHINING CENTRE, manufactured in 2014 in Italy, is designed for milling, drilling, tapping, and cutting of profiles made from aluminium alloys and plastics. The machine, equipped with top-quality components and innovative solutions, can process both on a single workspace and within two separate working zones, which significantly increases speed and production efficiency. Simultaneous machining in two working areas is possible thanks to the longitudinal worktable with a sliding machining station and chip conveyor. The MECAL machining centre for aluminium profiles achieves high structural rigidity due to its base made from high-grade steel tubes. During operation, the profile is held in place by special clamps with an independent power supply system, allowing for positioning and automatic repositioning of each individual clamp in a very short time. All 5 axes (X, Y, Z, A, C), driven by motors with digital systems, move along automatically lubricated precision guides. The MECAL GEOS-5 machining centre is offered with 3D software, providing a high level of programming flexibility, user-friendly operation, and an intuitive graphical interface. Technical specifications of the MECAL MC302 GEOS-5 profile machining centre: - Number of axes: 5 (X, Y, Z, A, C) - Y/Z axis travel: 1570/740 mm - Spindle tilt (A axis): ±120° - Spindle rotation (C axis): ±210° - Rapid traverse (X/Y/Z axis): 70/60/40 m/min - 3D graphical software - Tool magazine capacity: 18 - Maximum electrospindle speed: 24,000 rpm - Electrospindle power: 12 kW - Maximum blade diameter: 500 mm - Maximum diameter of side and end mill: 200 mm Iedsu Dl R Uspfx Ab Neib - Centralised lubrication

Condition: new, total length: 4,630 mm, Year of construction: 2026, load capacity: 13,000 kg, Crane JMG MC 130S Drive Electric Iiodpjy Eh Rusfx Ab Njb Year built 2026 Lifting weight (kg) 13,000

Condition: new, total length: 6,042 mm, Year of construction: 2026, load capacity: 40,000 kg, Crane JMG MC 400S Drive Electric Year built 2026 Lifting weight (kg) 40,000 Isdpfx Aey Eh Rnob Neib

Condition: used, total length: 5,600 mm, Year of construction: 2023, load capacity: 18,000 kg, - Funkfernbedienung für alle Kran- und Auslegerbewegungen. Falls vorhanden auch Bewegungen von hydraulischen Anbauteilen - Vorderachse Antrieb mit Gegenläufer Bewegung - Abnehmbare Kontergewichte - Proportional ausfahrbarer hydraulischer Ausleger - Frontabstützungen - Vorderradantrieb Nr. 2 Elektromotoren AC 8,5 kW 80V. Isolationsklasse H - Eigengewicht 21.610 kg - Abnehmbare Kontergewichte 6.110 kg - Batterie: 96 V - 1.035 Ah - Gewicht Batterie: 3030 kg - Reifen: Vorne: Nr.4 superelastich 355x50-20” / Hinten: Nr.2 superelastich 355x50-20 - Reifen Hersteller: Trelleborg - Farbe: grau - Lenkung: über die Hinterachse / Lenkwinkel 90°/90 - Elektronische Lastbegrenzung - Automatisches Bremssystem an allen Rädern - Hergestellt aus vorgefertigten und verschweißten Stahlplatte - Auslegerwinkel +65°/-6° - Elektromotor N° 2, 23 kW - 96 V AC, 16 kW - 96 V Isolationsklasse - Radstand: 3100 mm Ijdpfxoy Eh Nks Ab Njib - Bodenfreiheit Mitte: 170 - Höhe Kabine: 2100 mm

Condition: used, total length: 4,500 mm, Year of construction: 2023, load capacity: 13,000 kg, - Vorderradantrieb Nr. 2 Elektromotoren AC 8,5 kW 80V. Isolationsklasse H - Eigengewicht Kg. 14.640 Abnehmbare Kontergewichte 4.000 Kg. - Batterie: 80 V - 900 Ah = 8 Arbeitsstunden - Räder: Vorne: Nr.2 superelastich 300-15” Hinten: Nr.2 superelastich 250-15 - Lenkung: über die Hinterachse Lenkwinkel 90°/90° - LMI - Elektronische Lastbegrenzung - Automatisches Bremssystem an allen Rädern - Auslegerwinkel +60°/-5° - Elektromotor 17 kW - 80 V AC, Isolationsklasse - Hydrauliksystem: Angetrieben durch leise Zahnradpumpe (17kW), Isolationsklasse H - Hydraulikbedienung über Joystick und Hebel an der Funkfernsteuerung - Filter und Sicherheitsventile - Maximaler Betriebsdruck 22MPa. - Hergestellt aus vorgefertigten und verschweißten Stahlplatten - Abnehmbare Kontergewichte: Entwickelt für schnelle De- und Remontage, um jederzeit die Boden- und Achsbelastungen zu optimieren - Kran Klassifizierung nach UNI ISO 4301-1 Ijdpfsy Eh Iyjx Ab Neib

Condition: new, total length: 6,690 mm, Year of construction: 2026, load capacity: 65,000 kg, Crane JMG MC 650S Drive Electric Iijdsy Eh Itepfx Ab Neb Year built 2026 Lifting weight (kg) 65,000

Condition: used, functionality: fully functional, High-precision industrial multi-wire cutting machine designed for cutting hard and brittle materials. Iisdpfx Ajy Ey I Sob Nsb

Year of construction: 2013, operating hours: 20 h, condition: like new (used), functionality: fully functional, We are offering this like-new Olympus Gold Expert spectrometer, S/N:610030, year of manufacture 2013. Certificate of preventive maintenance and operational stability testing dated 20.4.2026 is included. Iiodpfx Aoy Ev Riob Njb If you have any questions or need further information, feel free to send us a message or contact us by phone.

Year of construction: 2020, operating hours: 1,400 h, condition: excellent (used), functionality: fully functional, X axis 7435 mm Y axis 530 mm Z axis 410 mm A/A1 axis ± 125° Electrospindle power: 8.5 kW Max. speed: 24,000 rpm Tool holder: HSK F63 10-position tool changer 8 individually motorized standard vices Pendulum machining Iisdpfxoy E S Rlo Ab Neb Four retractable standard stops Tool length measuring device Workpiece length probe

Condition: repair required (used), Year of construction: 2000, For sale: Elumatec cutting and machining centre, model SBZ 610. The machine has been preliminarily commissioned. Requires refurbishment. Iisdpfx Ajy Avyljb Neb

Condition: used, functionality: fully functional, Fully operational printer. Model material licences for model materials type : ABS , PC, Ultem 9080 Iodpfx Abeyzzmbj Neib

Condition: excellent (used), functionality: fully functional, working width 230 mm working height 120 mm Iedpfxsyz U D Tj Ab Noib 5 heads + 6th universal head head adjustment in two axes spindle diameter 40 mm variable feed speed regulation electric adjustment of pressure beam