Used Bluhm Systeme Thermal Inkjet Printer Printing System for sale (38,880)

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Ksdov Si Szjpfx Afvjdl Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, Bosch CHP Complete System (1 Set) – CHP CE 140 N (Year 2016) including Cabero Heat Exchanger/Dry Cooler (Year 2017) For sale is 1 complete, homogenous CHP unit consisting of 1× Bosch CHP Module CE 140 N (gas-powered CHP) including the corresponding peripherals as well as 1× Cabero heat exchanger/dry cooler. The unit is operational and in very good condition. Sale only as a complete package. 1) CHP / CHP Module Manufacturer: Bosch KWK Systeme GmbH Model: CHP CE 140 N Year of manufacture: 2016 Engine: MAN 2867 E 218 (gas-powered Otto engine) Performance data (CE 140 NA / typical as per datasheet series): Electrical output (nominal, 90/70°C): 70 – 140 kWel Thermal output (nominal, 90/70°C): 106 – 212 kWth Gas input: 192 – 384 kW Modulation range: 50 – 100 % Net efficiency: electrical 36.5 %, thermal 55.2 %, total 91.7 % Power supply: 400 V / 50 Hz, 3-phase Own energy consumption (electrical): 2,500 W Max. operating pressure (heating circuit): 6 bar Acoustics / emissions (CE series): Module noise level: 71 dB(A) NOx (dry, 5% O₂): ≤ 0.250 g/Nm³ CO (dry, 5% O₂): ≤ 0.300 g/Nm³ Dimensions (CE 140 NA – indicative values): Width W ≈ 1,160 mm Length L ≈ 3,850 mm Required room height min. ≈ 2,900 mm Wall clearance A > 900 mm 2) Cabero Heat Exchanger / Dry Cooler (1 unit) Manufacturer: Cabero Designation / Item No.: GCDD099MB-2X7-64-S D (EB) EC AXI A Version / Standard: PED / DIN EN 14276-2:2011 Year of manufacture: 2017 Heating surface: 2,742.65 m² Medium: Ethylene glycol 34% / Water 66% Fluid Group: 2 Max. allowable pressure (PS): 12 bar Test pressure (PT): 17.16 bar Permitted temperature range (TS): −40 / +60 °C Volume: 439.5 L Kedpfx Afjycl Abovjdl Pressure test date: 03./04.07.2017

Condition: excellent (used), Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high power AC and DC load in one unit and provides an ideal test solution for UPS, AVR and D/A inverters, especially for DUTs with step or square waveforms Each high power series AC&DC load has its own control and display panel and 5-state recall/memory, allowing for more efficient load setup Adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment Built-in GO/NG gauge test function provides short test result diagnosis for production and QC test throughput Features Voltage, current, wattage and VA variable display. CC, Linear CC, CR and Crest Factor modes. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W and ℃. Dual 4 1/2 meter display for voltage, current, watts and VA. Suitable for sine, square and step waves. Width 600 mm Height 1506 mm Depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used / used Kdedpfx Asm Tvyxefvjl Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, functionality: fully functional, Alsident System Extraction Arms. The extraction arm of the Alsident System brand is designed to keep the breathing atmosphere clean during work. This extraction arm is suitable for both ceiling mounting and for the wall of a work table. Good working condition. Please check out our other listings as well. Kdodpfx Aoupv U Hofvel

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, We have here a HSA systems HS1000 vacuum mailtable with 2 inkjet heads available. Year 2017 but was a demo machine so is not being used much, like new! Has never seen production. Kedpfoy R Dhaex Afvodl Complete with a streamfeeder V1000 friction feeder and the TIPC15 touchscreen together with 2 cartridge printheads, one with 3 cartridges and the other with 2 cartridges you are able to print envelopes and documents very ease with high speed

Condition: good (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, total height: 4,820 mm, total width: 15,000 mm, total length: 20,000 mm, type of input current: AC, input voltage: 400 V, SOCO SYSTEM End-of-Line Packaging Line with Robotic Palletizer, Carton Erectors & Sealers (Year of manufacture: 2020) This offer includes our complete SOCO SYSTEM shipping and end-of-line packaging line, exactly as installed in our facility. The system is fully operational, well-maintained, and was used until recently for pallet dispatch. This line is ideal for companies with high shipping or packaging volumes that value automated, efficient, and modular packaging processes. The system can be taken over in full or in part – we are happy to advise you on the optimal configuration. Technical Equipment / Components - 2 x Carton Erectors BE-2300 ATS and BE-2200 ATS Automatic carton erectors for folding and sealing bottom flaps (self-adhesive tape, width = 50 mm). - Long Flap Spreader For precise feeding and alignment of cartons onto the main conveyor line. - Powered Conveyors & Labelling Sections Roller conveyors, curves, and distribution lines with integrated label transport. - Carton Sealer T-4000 with Tape Alarm Automated top carton sealing with self-adhesive tape. - Labeller LOGOPAK Logomatik 415-T (integration ready) Transfers cartons for automatic labelling and verification via scanner. - Palletizing Robot SOCO PRS-LRS-1218-H3 Industrial robot for fully automated palletizing according to customer-specific patterns. - Pallet magazine for 14 pallets Automatic provision of empty pallets. - Safety Features: Swing doors / light curtains, emergency stop interlinking, Type 2 control, controller, CE certification. - Additional Modules: T-55 with conveyor system and ball table, F-100 + T-2000 conveyor system, RAL 9006 special colour. Complete assembly, factory testing, installation, and commissioning included (original system price according to SOCO SYSTEM offer: €243,700). Function Description The line automatically erects cartons, seals the bottoms, conveys them on the main packaging conveyor, closes and seals the tops, labels and inspects them. Error-free cartons are then picked up by the robotic palletizer and stacked according to defined pallet layouts. The entire system is modular and can be integrated into existing production or shipping operations. General Information Year of manufacture: 2020 Manufacturer: SOCO SYSTEM A/S Condition: used / very good / immediately operational Kedpfx Asxdb Saofvjdl Location: Norderstedt (near Hamburg) Scope of delivery: complete shipping line including robot, sealer, and conveyor technology.

Condition: used, functionality: fully functional, Year of construction: 2014, The printer was rarely used and was located at a university. It is no longer in use. Kdsdpfxjw Inpnj Afvel

Condition: used, mileage: 603,000 km, power: 300 kW (407.89 HP), first registration: 03/2008, fuel type: diesel, tire size: 385/65 r 22.5, axle configuration: 8x4, wheelbase: 5,750 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, total length: 8,150 mm, total width: 2,550 mm, Year of construction: 2008, Equipment: ABS, AdBlue, air conditioning, central locking, electric window regulation, trailer coupling, = Additional Options and Equipment = - Leaf suspension - Digital tachograph - Hub reduction - PTO (Power Take-Off) - Radio/CD player - Towing hitch = Further Information = Technical Data Number of cylinders: 6 Engine displacement: 12,902 cc Axle Configuration Front axle 1: Tyre size: 385/65 R 22.5; Steered; Tyre tread left: 70%; Tyre tread right: 70%; Suspension: Leaf spring Front axle 2: Tyre size: 385/65 R 22.5; Steered; Tyre tread left: 70%; Tyre tread right: 70%; Suspension: Leaf spring Rear axle 1: Tyre size: 315/80 R 22.5; Twin tyres; Left inner tread: 55%; Left outer tread: 55%; Right inner tread: 55%; Right outer tread: 55% Rear axle 2: Tyre size: 315/80 R 22.5; Twin tyres; Left inner tread: 60%; Left outer tread: 60%; Right inner tread: 60%; Right outer tread: 60% Weights Unladen weight: 17,690 kg Payload: 19,310 kg Gross vehicle weight: 37,000 kg Condition Damages: none Kdjdjy N Uf Hepfx Afvel

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 16, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Sprinter 515/517 Front Low-Floor Entry M2 Permissible Gross Weight 5,000 kg / Capacity 19 passengers Optionally available as M3 with up to 6,400 kg / up to 30 passengers Interior conversion as follows: - Fare collection counter instead of co-driver seat - Double-width electric passenger door with 1,250 mm opening width Kjdpsy Rhrijfx Afvjdl - Manual wheelchair ramp - 13 city bus seats / sleeper seats optional (can be fixed upon request) - Wheelchair/pram space - 6 standing places (including 3 folding seats) additionally --> Total capacity 19 plus driver (additional standing spaces available on request) - Passenger compartment air conditioning (Webasto 12 kW) plus MB front A/C 7 kW at driver’s area - Convectors heating in passenger compartment (up to behind the last seat row), thermostatically controlled - Length 7,367 mm with original rear twin doors --> longer versions up to 7,500 mm or more available upon request - Double glazing, VIP black, in original cut-outs (optional panoramic glazing available) - Optional extra-large windscreen with electric sun blind and route display preparation - Eligible for funding in most federal states (contact us for details) - Complies with §30d paragraph 4 of the StVZO Base vehicle, e.g., equipped as follows: In standard MB specification with 150 HP (optional 170 HP), incl. comfort driver’s seat (optional air-suspended seat), optional auxiliary heater, front A/C, MB radio, cruise control, 9-speed automatic, optional park package, ... GSR 3 systems included as standard: - Reversing camera - Blind spot assist - Turn assist - MBUX 10-inch (radio with Bluetooth, CarPlay, touchscreen) - Tire pressure sensors - Attention assist - Active lane keeping assist - Starting information assistant - Intelligent speed assist - Distance assist - Rain sensor - Electric exterior mirrors This is a sample vehicle. This model is not in stock. Delivery time is approximately 4 months. Base price without destination displays in above-mentioned configuration from €104,990.00. Net export possible.

Condition: new, Year of construction: 2026, power: 50 kW (67.98 HP), motor manufacturer: Battery System: LIFePO4, Field of application: Construction Empty weight: 1.600 kg Dimensions of cargo space: 142 x 135 x 170 cm Frequency: 50 Ksdpfxsy Evlgo Afvodl Voltage: 400 Please contact Team DPX for more information

Condition: used, mileage: 147,708 km, first registration: 02/2014, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 06/2026, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,321 mm, total width: 2,100 mm, total height: 2,600 mm, loading space length: 3,550 mm, loading space width: 2,050 mm, loading space height: 390 mm, Equipment: ABS, air conditioning, navigation system, soot filter, Mercedes Benz 516CDI SPRINTER DAUTEL ALU-3SKIPPER System 2050 Kdodpfx Aexb Hmkjfvsl DAUTEL ALU-3SKIPPER System 2050 Equipment: - Rear work lights - Roof-mounted beacons - Tow bar - 3-seater - Tachograph - Radio navigation - Fog lights - Electric windows - Electrically adjustable mirrors - Reversing camera - Small toolbox We are happy to assist you with financing/leasing solutions in cooperation with our partners. All information is provided without guarantee. Subject to error and prior sale.

Condition: good (used), mileage: 361,600 km, power: 309 kW (420.12 HP), first registration: 02/2017, fuel type: diesel, axle configuration: 8x2, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: AdBlue, Coming soon; MAN TGS 35.420 8x2*4 – HMF container system – Euro 6 – Automatic Year: 27-02-2017 Mileage: 361,600 km VIN: WMA90SZZ8HM732811 HMF container system Side tipper Euro 6 = Further information = Front axle 1: Steered Front axle 2: Steered Number of cylinders: 6 Unladen weight: 12,150 kg Payload: 19,850 kg Gross vehicle weight: 32,000 kg Technical condition: good Visual condition: good Kdjdpoyxdupjfx Afvol Stock status: Expected soon

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Detailed Description For sale: Complete aisle OSR Automated Storage System (Knapp) An ideal package for integrators and logistics operators looking to boost their automated storage capacity. Sold as-is, full set ready for installation. Less than 100 hours of operation! Lot contents: • 10 OSR units (Knapp shuttles) – Shuttles for automated storage and handling • 2 lifts (for vertical level transfer) • Infeed and outfeed conveyors included (for easy integration into existing material flow) • 2,200 SILVERLINE European-standard plastic totes (or equivalent) + dividers provided • Uprights, beams, and crossbars for racking (structural storage elements) • Safety mesh (for production area protection) • No picking stations included Condition: Equipment barely used. Inspected and fully functional. Sold as-is. Kedpsxtfa Hsfx Afvjdl Numerous spare parts available! Delivery and installation possible, contact us! No control or installation software provided. Advantages: • High-capacity automated storage (2,200 totes) • Modular Knapp OSR solution, compatible with modern automated environments • Conveyors included to simplify material flow integration Price: €400,000 (complete lot, excl. VAT). ⚠️ Important: ISC Recycle is responsible for equipment sale only. No integration or commissioning services are offered.

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Kjdpsxwp Nyofx Afvodl Changes and errors in the technical data and information as well Subject to prior sale!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SLM250182820, Year of construction: 2018, total length: 110 mm, total width: 100 mm, laser power: 250 W, laser wavelength: 1,070 nm, type of cooling: air, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser System Laser type: Fiber laser Kdjdsy Sm D Hjpfx Afvel Laser power: 250 W Wavelength: 1,070 nm Spot size: 40 µm Cooling: Air cooling Process Chamber Process atmosphere: Low-oxygen environment Shielding gas: Argon / Nitrogen Max. extraction system flow rate: 190 m³/h Coating System Coater: Precision coater with rotary guide Coating blade: Steel, rubber, or brush system Micrometer screws: For optical alignment of the coater MACHINE DETAILS Printing Process: SLM (Selective Laser Melting) process Operation Control model: 12" Microsoft Surface Pro 3 tablet Control type: Tablet-based control and monitoring Build Volume and Powder Reservoir Build volume: 100 mm x 110 mm Reservoir volume: 110 mm x 200 mm EQUIPMENT Integrated extraction system Cartridge system for quick and safe metal powder replacement Monitoring and adjustment of process parameters Cloud manufacturing technology Accessories as shown in the images

Condition: excellent (used), Year of construction: 2021, 2021 DELTA WASP 3MT Large Format Industrial 3D Printer Print Volume Ø 1000 x h 1000 mm. Max Output 3.8 kg/h with ABS WASP and 5mm Nozzle. Standard Nozzle Ø 3 mm. Compatible Nozzle diameter 2 mm / 3 mm / 5 mm. Layer Resolution Min 0,5 mm (with a 2 mm nozzle) – Max 2,5 mm (with a 5 mm nozzle). Print Speed 100 mm/s. Travel Speed 200 mm/s. Connectivity WiFi, LAN, USB. Hotend Temperature Max 350°C. Chamber Temperature Max 150°C. S/No.212640124 (2021) Printer Dimensions 215 cm x 235 cm x 305 cm. Printer Weight 350 Kgs. Required Space for Assembly 5,5 m x 2.5 m x H 3.60 m. Packaging Dimensions 310 x 132 x 116 cm. Weight with Packaging 670 Kgs. Please Note: Feeder Is Currently Jammed So May Need Attention. Kdjdpfey Sy U Sex Afvjl

Condition: new, SLS Materials for Industrial & Compact SLS 3D Printers Kedpfxjy Til Ae Afvsdl High-performance SLS powders for professional additive manufacturing – compatible with a wide range of industrial and compact SLS 3D printers, including EOS, Formlabs, Sinterit, Sintratec, Nexa3D, and Raise3D systems. Our SLS powders undergo extensive in-house testing to ensure reliable processing, excellent mechanical properties, and consistent print quality across multiple machine platforms. Designed for both industrial production and compact SLS systems, IM3D materials deliver professional performance without restricting you to a specific ecosystem. Available Materials PA12 Balance – €45/kg Cost-effective, all-purpose PA12 powder with excellent refresh behavior and reliable mechanical properties. PA12 Performance – €49/kg Enhanced PA12 material with improved elongation at break and increased impact resistance for demanding functional applications. PA12 Glass Filled (PA12-GF) – €44/kg Stiff, dimensionally stable PA12 material reinforced for tooling and engineering parts. TPU88A – €45/kg Flexible SLS material with excellent elasticity, durability, and impact resistance. Machine Compatibility Compatible with a broad range of SLS systems, including: EOS / EOSINT: P100, P110, P350, P360, P380, P385, P390, P395, P396, P450, P500, P700, P730, P760, P770 Formlabs: Fuse 1, Fuse 1+ Sinterit: Lisa, Lisa Pro, Lisa X, Suzy Sintratec: Kit, S1, S2, S3 Nexa3D: QLS230, QLS236, QLS260 XYZ Systems: MfgPro230 xS, MfgPro236 xS Raise3D: RMS220 SLS4All Innova MK1 Loopzizo K-100 More compatibility information: im3d.shop/printer-compatibility OEM Material Alternatives We offer alternatives and/or drop-in replacements for materials from Formlabs, Sinterit, Sintratec, and Raise3D, including: Formlabs PA11, PA12, PA12 Tough, PA12-GF, TPU90A Sinterit Flexa Performance, PA11 Onyx, PA11.5, PA12 Eco, PA12 Industrial, PA12 Smooth Sintratec PA12, PA12-GF, TPU88A Raise3D PA Next, PA Next GB, PA11, PA12, PA12 GB, TPU86A, TPU90A OEM comparison overview: im3d.shop/compare/oem Why Choose IM3D SLS Materials? Broad compatibility across industrial and compact SLS systems Excellent refresh rates and low cost per part Stable processing and consistent print quality Industrial-grade performance without vendor lock-in In-house tested and production validated Technical onboarding and support available Fast shipping from the Netherlands

Condition: used, This listing is for the Sartorius MSA225S + YDP10 Analytical Balance/Printer The unit is in full working condition and is ready for immediate use This premium laboratory weighing system features a Cubis analytical balance paired with a dedicated printer. It delivers ultra-precise measurements and instant documentation for compliance-driven environments. Ideal for advanced research, pharmaceutical dosing, and quality control applications. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) [[1]()] Ksdjxv Du Ijpfx Afvodl Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. [[1](), [2]()] Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Year of construction: 2014, operating hours: 4,000 h, condition: used, Operational machine with low hours! Ask for additional information! Ksdpsy R Dc Dsfx Afvsdl

Condition: good (used), functionality: fully functional, machine/vehicle number: J5500144, Year of construction: 2020, operating hours: 5,336 h, Stratasys J55 Prime professional full-color PolyJet 3D printer available due to upgrade to a larger production system. The machine was professionally maintained during operation and is suitable for design studios, prototyping labs, universities, and research environments requiring high-quality multi-material and full-color models. Specifications Total printing hours: approx. 5,336 h Printheads recently replaced (approx. 250 h use) Professionally serviced during operational period Machine idle approx. 1 year so technical inspection recommended prior to use Original system value > €120,000 Stratasys ProAero Air Extractor (PolyJet air filtration unit) included Stratasys Scale / Scanner included Standard cables and connections included Available service history documentation Kdodpfxjytg Rzj Afvol Typical applications Industrial design & product development Architecture and design prototypes Medical and educational models Multi-material and full-color prototyping Additive manufacturing research Machine available for inspection by appointment. Collection location: Belgium. Please contact us for additional information, photos, or inspection arrangements.

Condition: used, offer for central drum flexo press FLEXOTECNICA NG10 from year 2009 with 1280 mm web width Kdodpfoy Sfcnsx Afvol

Condition: good (used), At least 10 Sato SP40 label printers - 203 dpi, thermal printing, USB, fast, compact - used - : Price per unit from location: only €159 (net)! Manufacturer: Sato Type: SP40 Year of manufacture: unknown Print technology: thermal printing (direct) Print resolution: 203 dpi, for razor-sharp and easy-to-read labels Maximum print width: 104 mm, perfect for common label formats Maximum print speed: Up to 152 mm per second for fast print jobs Media: Suitable for labels, tags and paper rolls with a width of 25 to 110 mm User-friendly: Easy operation thanks to a clear LCD display and simple button control Compatibility: Supports common label software and a variety of barcodes such as Code 128, EAN, UPC and many more Connections: USB, serial (RS-232) and optional LAN - flexible in integration into your existing system Kdjdpfxsvx E R He Afvjl Compact and robust: The space-saving design ensures a long service life and fits into any work environment The Sato SP40 label printer is the perfect choice for anyone looking for a reliable and easy-to-use printer for labels and search for barcodes. With its compact design, it fits into almost any office or work environment and offers fast and precise printing performance. Ideal for small and medium-sized businesses, it helps you efficiently create labels for products, shipping or warehouse management. Condition: good Available: immediately Location: Braunschweig

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,733 h, total length: 260 mm, total height: 340 mm, total width: 300 mm, type of input current: AC, overall weight: 90 kg, input voltage: 230 V, PRODUCT DESCRIPTION & TECHNICAL DATA For sale is a professional industrial 3D printer, model 3DGence INDUSTRY F340. The machine was used in a controlled environment, regularly maintained, and has very low operating hours for an industrial system. The printer is characterized by its robust construction (approx. 90 kg), highest mechanical precision, and the ability to process demanding technical plastics without warping. Thanks to the actively heated build chamber (up to 85 °C), materials such as nylon (PA) or polycarbonate (PC) can be printed reliably and with excellent layer adhesion. KEY DATA: Manufacturer: 3DGence Model: INDUSTRY F340 Operating hours: 1,733 h Build volume: 260 x 300 x 340 mm (X/Y/Z) Weight: approx. 90 kg (heavy-duty industrial mechanics with ball screws) Connection: 230V SCOPE OF DELIVERY & PRINT MODULES: 3DGence INDUSTRY F340 base machine PRO module: Standard module for PLA, ABS, PETG, etc. HT module: High-temperature module up to 340 °C nozzle temperature for warp-free processing of PA, PC, or PA-CF, unused/in original packaging. Original price: €3500 Kdsdpfsy Tng Sox Afvsl Integrated, actively heated filament drying chamber (up to 70 °C) for moisture-sensitive materials. CONDITION & MAINTENANCE NOTE: The machine is in very good and well-maintained condition, both visually and mechanically.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, total length: 1,450 mm, total height: 1,800 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 3,000 kg, warranty duration: 12 months, table width: 1,450 mm, tank capacity: 19 l, table length: 1,100 mm, workpiece weight (max.): 150 kg, PRICE 95,000 EUR (excl. VAT) SERVICES INCLUDED IN THE PRICE: Wooden crate suitable for international container shipping Inspection and demonstration under power prior to payment, at our facility in Belgium Sample print during inspection, upon request On-site installation and commissioning by personnel with previous certified experience on Massivit systems, included for EU destinations. (For non-EU installation, availability is subject to location and prior agreement — please enquire.) On-site operator training by personnel with previous certified experience on Massivit systems at the buyer's premises (EU destinations included; non-EU subject to prior agreement), or alternatively at the seller's facility in Belgium (max. 2 persons, max. 5 days) — available for all buyers 6-month warranty on refurbished mechanical components: dispensers (stators, bearings, couplings), pump stator, dispenser seals, gel filtration system 12 months remote technical assistance via WhatsApp, email or video call, including operation support, g-code guidance, print parameter optimisation and general technical advice DESCRIPTION Large-scale industrial 3D printer Massivit M1800 Pro, model year 2018, professionally refurbished and operational and testable under power. The machine can be inspected and tested under power by appointment at our facility in Belgium. Sample prints available upon request. On-site installation and operator training are included for EU destinations and delivered by personnel with previous certified experience on Massivit systems, supporting setup, calibration and commissioning. For non-EU destinations, please enquire. Training at the seller's facility in Belgium is available for all buyers (max. 2 persons, max. 5 days), covering installation procedures, operation, routine maintenance, software usage and basic troubleshooting. Post-sale remote technical assistance included for 12 months. The machine is equipped with dual independent printheads and offers a build volume of 145 × 111 × 180 cm, making it suitable for the production of oversized parts, moulds, master models and display elements. The system operates with GDP (Gel Dispensing Printing) UV-cured technology, enabling high-speed manufacturing of large components with reduced support requirements, lower material consumption and reduced post-processing time. REFURBISHMENT DETAILS Dispensers refurbished: new stators, bearings and couplings Hydraulic pump refurbished: new stator installed Kdsdjxx S Diopfx Afvol Dispenser seals and rubber wear components replaced Gel filtration system refurbished: new filters installed UV curing modules tested and calibrated XYZ belt tensioning and full table alignment performed DisplayPort cables and left head camera replaced Software updated to Massivit Smart Printer v5.0.3, BIOS/OS verified Complete system alignment, calibration and functional testing performed before sale Standard equipment included: 2 × nozzles 2.6 mm, 2 × nozzles 1.8 mm, grease gun Software license dongles included (Massivit Printer + Massivit Slicer) Machine available for collection in Belgium (EXW — Ex Works). Loading, handling and transport are at the buyer's cost.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, total length: 1,740 mm, total height: 1,960 mm, total width: 1,425 mm, overall weight: 200 kg, input voltage: 230 V, Modix Big Meter 3D Printer for Sale Ksdpfsy R U Nhsx Afvjdl Professionally assembled and fully built up. Purchased for a large-format print project, which has now been successfully completed, making the printer surplus to our requirements. Currently equipped with a Titan Aero extruder and an E3D Super Volcano hot-end upgrade, along with additional cooling enhancements. The printer supports dual extrusion and includes a second Titan Aero extruder. The current configuration can print up to 6kg per 24 hours per nozzle with 1.75mm PLA filament. The printer is fully enclosed and features a heated bed divided into three individually controlled sections. PEI bed surface sheets are in very good condition, and a new spare set of PEI sheets is also included. A selection of 1.4mm spare nozzles for the upgraded Super Volcano hotend is provided. Software package includes slicer profiles and macros. Additional upgrades and equipment: - Integrated CCTV camera for remote monitoring - Automatic fire extinguisher system with thermal cut-out for unattended operation - Power consumption meter installed - 7-drawer tool cabinet with tools and spare parts included The printer is located in Zaandam (near Amsterdam) and ready for collection. Delivery of the fully assembled printer can be arranged within the Netherlands and neighboring countries at an additional cost of €1 per kilometer each way. Price excludes VAT / BTW (where applicable).