Used Boge C 20 F for sale (86,034)

Condition: new, Year of construction: 2025, ∗JCB TM220 SV C New Vehicle∗ - JCB Diesel by Kohler [55kW/74hp] - Emission Standard Stage V with DPF - Lifting Height: 4.56 m - Rated Load Capacity: 2,200 kg - 2-Speed Hydrostatic Drive - 20 km/h - Tyres: GOODYEAR POWERLOAD 300/70R20 - Comfort Cabin (ROPS/FOPS) - Radio Preparation - Adjustable Steering Wheel - Fully Opening Windows - Heating - Limited Slip Differential Front and Rear Hodpfx Aksyfvztjrsnu Front Axle = 45% Rear Axle = 25% - Single-Lever Servo Control - Euro Quick Coupler - Fork Carrier with 1,345 mm Pallet Fork - LED Work Lights Front/Rear/Boom - Amber Beacon - Armrest Right & Left - Roof-Mounted Windscreen Wiper Immediately operational, many additional attachments in stock. Appointments for inspection are expressly desired. On request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Mihm (Tel. …) will be happy to assist you. For further information, please visit our website. Subject to errors and prior sale! BSS, Quick Coupler System, Road Approval = Further Information = Please contact Tobias Ebert for more information.

Condition: new, functionality: fully functional, !!! We have two pcs in stock. Price is for one pc only !!! Performance & Measurement • Measurement Principle: Thermal mass flow bypass sensor with a laminar flow element. • Flow Range (10K Sub-code): Configured for low to mid-range capacities, nominal 0.08 to 10 ln/min (up to 15 ln/min max depending on the specific gas calibration). • Accuracy: ±0.5% of Reading plus ±0.1% of Full Scale (standard for dry/clean gases). • Repeatability: < ±0.2% of Reading. • Settling Time: Standard 1 to 2 seconds. • Turndown Ratio: 1:50 in analog mode (digitally extendable up to 1:187.5). Mechanical & Environmental • Ingress Protection: IP65 dust-tight and water-jet proof rugged housing. • Pressure Rating: Up to 64 bar abs (PN64). • Operating Temperature: -10°C to +70°C. • Wetted Materials: Stainless steel 316L or equivalent. • Weight: 1.4 kg. Electrical & Communication • Power Supply: +15…24 Vdc (±10%). • Power Consumption: Max 320 mA (approx. 3.5 W typical at 24V). • Analog I/O: 0…5 (10) Vdc or 0 (4)…20 mA. • Digital Interfaces: Standard RS232 with configurable fieldbus options (e.g., PROFIBUS DP, DeviceNet, Modbus RTU, EtherCAT, PROFINET). Model code breakdown: • AGD: Represents the precise hardware configuration configuration, internal control valve size, and basic orifice profile. • 44: Specifies the primary electrical connection setup (typically an 8-pin DIN male connector for power/analog/RS232 plus secondary M12 fieldbus options optimized for IP65 environments). • V: Denotes Viton (FKM) internal elastomer seals and plunger materials. Hnjdoz Hq Rbopfx Akrju Brand new never used. Please check out our other listings as well.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 20645, Offer 24309 Hnodpfst Tad Hjx Akrsu Technical data: - Table size 710 x 315 mm - Working range of the axes - X (longitudinal) mechanical / manual 400 / 420 mm - Z (vertical) 350 / 370 mm - Y 220 / 228 mm - Distance milling spindle - table surface 50 - 465 mm - Tool holder ISO 40 - Spindle speeds horizontal in 16 steps regul. 56 - 1800 rpm - Spindle speeds vertical in 16 steps regul. 56 - 1800 rpm - 16 feed speeds 11 - 355 mm/min - FAGOR digital display - Drive 400 V / 2.2 kW - Space requirement approx. W 1600 x H 1900 x D 1600 mm - Weight approx. 1300 kg

Condition: used, functionality: unexamined, Ferwood Code: RU0011869 - Manufacturer Code: SP075S-MF2-20-1C1-2S - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer a refurbishment service, please contact us. 4KG 36X26X21 Hnedpeymd Iwofx Akrsu

Condition: new, Year of construction: 2025, Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute; max. packaging size: L(80-1000)xW(80-400)xH(5-180) mm; sealing blade length: 500mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L5405xW1780xH1380 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hodpfx Aev Nl Hpskrsnu

Condition: new, Year of construction: 2025, Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute; max. packaging size: L(80-1000)xW(100-500)xH(5-180) mm; sealing blade length: 630mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L6350xW1950xH1380 mm. Hnodpev Nl Hvofx Akreu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, axle configuration: 2 axles, first registration: 06/1974, color: other, Year of construction: 1974, Empty weight: 3.200 kg Axle 1: left 12 12 mm right 12 12 mm Hnedpeyf Eluefx Akrou Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm We have the possibility to stack trailers!

Condition: ready for operation (used), Step-Tec HVCS230-S-20-1.2/15-3FD-HSK-A63 high-speed spindle Id. 6014.058.A.10e removed from Norte VS500 Speed, the thread on one of the connectors is damaged, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hnsdoul Ipnjpfx Akreu

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 01/2006, total length: 6,900 mm, total width: 2,500 mm, suspension: air, wheelbase: 5,500 mm, color: blue, Year of construction: 2006, Axle configuration Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Weights Empty weight: 3.230 kg Carrying capacity: 29.270 kg GVW: 32.500 kg Condition Technical condition: good Hnodez Rqf Uspfx Akrsu Visual appearance: good Identification Registration number: OS-48-HV Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Twist-locks = Remarks = Krone SZC 20 / 20FT / Container chassis

Condition: used, axle configuration: 3 axles, first registration: 08/2006, total length: 9,770 mm, total width: 2,450 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,790 mm, Year of construction: 2006, Equipment: ABS, = Additional options and equipment = - Lift axle - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 15%; Tyre tread right: 15% Rear axle 2: Tyre tread left: 15%; Tyre tread right: 15% Rear axle 3: Tyre tread left: 15%; Tyre tread right: 15% Weights Unladen weight: 3,850 kg Payload: 35,150 kg Gross vehicle weight: 39,000 kg Condition Damages: none Identification Registration number: OJ-20-KK Hsdpfxozb Hl Ij Akrenu

Condition: ready for operation (used), power: 205.2 kW (278.99 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2002, From our readily available stock of used vehicles, we offer you: Fire engine HLF 20 ALL-WHEEL DRIVE 4x4 on MB ATEGO 1328 AF General data: • First registration 09/2002 • Mileage: approx. 41,000 km • Unladen weight: 9,460 kg • Permissible total weight: 14,500 kg Hjdpez R S Hzjfx Akrsnu • New TÜV/MOT inspection Chassis: • MB 1328 AF 4x4 with 279 hp (205 kW) • Automatic transmission • Twin-tired rear axle Cab: • Standard crew cab (1:7) in RAL 3026 • Crew leader's seat with PA mounting • Shelf instead of operator's seat • Mountings for 2 compressed-air breathing apparatuses facing against the direction of travel in the crew compartment • Mountings for 2 compressed-air breathing apparatuses facing in the direction of travel in the crew compartment Superstructure: • Manufacturer Ziegler • HLF20 superstructure according to DIN • Two generous side equipment compartments • Fold-out steps for side equipment compartments • Mounts for standard equipment • Mountings for 2 additional compressed-air breathing apparatuses • Deployment device for 2 single-person reels Vehicle pump/fire extinguishing agent tank: • Ziegler fire extinguishing centrifugal pump • Foam proportioning system • Water tank 1,400 l • Foam tank 150 l Safety and lighting • Ambient lighting on the superstructure • Pneumatic light mast • Rear warning device We will gladly provide you with a specific offer and give you a detailed presentation of the vehicle at our location in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: used, fuel type: diesel, axle configuration: 4x4, fuel: diesel, gearing type: automatic, Year of construction: 2004, From our immediately available stock of used vehicles, we offer you: Firefighting vehicle HLF 20 ALL-WHEEL DRIVE 4x4 on MB ATEGO 1328 AF General data: • First registration 03/2004 • Mileage: approx. 144,500 km • Unladen weight: 9,450 kg • Permissible total weight: 14,500 kg • New TÜV/MOT inspection Chassis: • MB 1328 AF 4x4 with 279 hp (205 kW) • Allison automatic transmission • Twin-tire rear axle Cabin: • Standard crew cabin (1:8) in RAL 3000 (fire engine red) • Mounting points for 2 compressed air breathing apparatus facing forward Superstructure: • Manufacturer: Schlingmann • HLF20 superstructure according to DIN standard • Three generously sized side equipment compartments on each side • Fold-out steps for the front and rear side equipment compartments • Mounting points for standard equipment • Mounting points for 2 additional compressed air breathing apparatus • Deployment system for 2 single-person reels Vehicle pump/fire extinguishing agent tank: • Firefighting centrifugal pump Schlingmann FPN 2000-10 • Output: 2,000 l/min at 10 bar • Water tank: 1,800 l • Foam tank: 150 l Firefighting equipment: • Fixed quick-attack hose, 50 m long, located on top • Monitor on the vehicle roof Safety and lighting • Ambient lighting on the superstructure • Pneumatic lighting mast • Rear warning device Hnsdpfoz Dq U Iex Akrju We will gladly provide you with a detailed offer and show you the vehicle in Berlin. All information is provided to the best of our knowledge and belief, without guarantee for completeness and accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: used, axle configuration: 3 axles, first registration: 06/2001, color: other, Year of construction: 2001, Empty weight: 6.000 kg Axle 1: left 8 mm right 6 mm Axle 2: left 7 mm right 7 mm Axle 3: left 8 mm right 12 mm Hjdpjzum T Dofx Akrjnu We have the possibility to stack trailers!

Condition: repair required (used), Year of construction: 2014, machine/vehicle number: AA2/002546, number of slots in tool magazine: 24, overall weight: 6,600 kg, table length: 5,200 mm, table width: 1,300 mm, TECHNICAL DETAILS Table length: 5,200 mm Table width: 1,300 mm Number of milling spindles: 1 Type of milling table: Beam table Tool changer positions: 24 MACHINE DETAILS Voltage: 400 V Current consumption: 64 A Hnedjy Nybtspfx Akrou Dimensions & Weight Dimensions (L x W x H): 10,300 x 2,450 x 2,800 mm Net weight: 6,600 kg Transport packages: 1 EQUIPMENT Drilling tool Vacuum pump Tools Becker Vtlf 250 vacuum pump: - Year of manufacture: 2008 - Main motor power: 5.5 kW - Connection diameter: 70 mm - Oil-free: Yes Note: The machine requires repair. There is an issue with the CAN bus system.

Condition: used, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 20' container with glass windows - 2x available Built by the company Baumann Container The price is per unit. 20' container with glass windows - 2x available Built at company Baumann Container The price is per unit. Internal dimensions mm (LxWxH) 5,898 x 2,352 x 2,390 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hodpfx Aeubz Emskrsnu - .

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2006, total length: 7,600 mm, total width: 2,550 mm, suspension: air, wheelbase: 6,280 mm, color: other, Year of construction: 2006, Axle configuration Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.370 kg Carrying capacity: 35.630 kg GVW: 39.000 kg Identification Registration number: OS-76-KY Hjdjy Ulwkopfx Akrenu

Condition: used, Grundfos CR 60 20 A-F-A-BBUE Model B500002P39447 16 bar max. 110 degrees Celsius 60m3/hour 20.2m height n 2900 rpm Hedpouif Iujfx Akronu The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: excellent (used), axle configuration: 2 axles, first registration: 04/1999, suspension: steel, color: white, Year of construction: 1999, 2X AVAILABLE LEAF SPRING SUSPENSION DUAL TIRES = Further information = Axle brand: ROR Suspension: Leaf spring suspension Rear axle 1: Dual tires Rear axle 2: Dual tires Technical condition: very good Hnedpfx Akjzif Ivjrou Optical condition: very good Please contact Thierry Leemans for further information.

Year of construction: 2002, condition: used, fuel type: electric, Control, control part, interface, driving control, driving current control -Manufacturer: Jungheinrich, drive control from picking truck type: ECE 20 -Type: AS 2412/1 F -Mat no.: 50059236 -Voltage: 24V -Number: 1x control unit available -Price per piece -Dimensions: 250/190/H100 mm Hedpfx Aoi Dudrskrenu -Weight: 4.2 kg/pc.

Condition: used, Year of construction: 2000, Control unit for electric forklifts, control system, control unit, interface, motor control, motor controller, control, drive control, drive current control Hnedezg A R Aspfx Akrsu -Handover: in its current condition as inspected -Connector plug: Damaged, see photos -Manufacturer: Linde, control unit from electric forklift E15Z-02 -Type: LDC-20/15-FE02 -Mat-No.: 390 360 53 97 -Dimensions: 185/120/H65 mm -Weight: 0.6 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 250 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Software: QVPAK V10.005 Hnsdou Sqmdopfx Akrsu

Condition: used, -Used -Wind and waterproof -available immediately -The price is ex-depot Duisburg (also available in other regions on request) -We are happy to take care of delivery and crane unloading (costs on request) Our 20-foot storage container is the perfect solution for your storage needs. It offers you a safe, flexible and cost-effective way to store your goods and materials. Whether for use on construction sites, in industry or for private purposes - this container meets the highest standards of quality and functionality. Product features: - Dimensions: 20 feet (6.06 m) long, 2.44 m wide and 2.59 m high - Volume: Approx. 33 m³, ideal for storing large quantities of goods - Material: Robust steel construction that guarantees durability and resistance - Security: Equipped with a reliable locking system and reinforced doors to optimally protect your stored goods - Weatherproof: Weatherproof and corrosion-resistant coating that protects your goods from rain, sun and other environmental influences Hnedpfx Akjvyabverou - Ventilation: Strategically placed ventilation openings prevent the accumulation of moisture and ensure an optimal storage climate Applications: The 20 foot storage container is ideal for storing tools, machines, materials, furniture and much more. It can be used both temporarily and permanently and is ideal for construction sites, warehouses, events or as additional storage space for your company. Additional benefits: - Easy handling: Thanks to the standardized dimensions, the container is easy to transport and place. - Flexibility: The container can be used in different locations and is mobile, so you can move it if necessary. Customization: On request, we offer individual modifications to meet specific requirements, such as shelving systems or additional ventilation. Rely on our new 20-foot storage container for safe and efficient storage of your goods!

Condition: used, axle configuration: 3 axles, first registration: 07/2000, color: other, Year of construction: 2000, Empty weight: 3.940 kg Axle 1: left 6 mm right 6 mm Axle 2: left 5 mm right 5 mm Axle 3: left 6 mm right 6 mm Hedpfjwycwrex Akrjnu We have the possibility to stack trailers!

Condition: used, fuel type: diesel, axle configuration: 4x4, fuel: diesel, gearing type: automatic, Year of construction: 2004, From our immediately available stock of used vehicles, we offer you: Firefighting vehicle HLF 20 ALL-WHEEL DRIVE 4x4 on MB ATEGO 1328 AF General data: • First registration 03/2004 • Mileage: approx. 144,500 km • Unladen weight: 9,450 kg • Permissible total weight: 14,500 kg • New TÜV/MOT inspection Chassis: • MB 1328 AF 4x4 with 279 hp (205 kW) • Allison automatic transmission • Twin-tire rear axle Cabin: • Standard crew cabin (1:8) in RAL 3000 (fire engine red) • Mounting points for 2 compressed air breathing apparatus facing forward Superstructure: • Manufacturer: Schlingmann • HLF20 superstructure according to DIN standard • Three generously sized side equipment compartments on each side • Fold-out steps for the front and rear side equipment compartments • Mounting points for standard equipment • Mounting points for 2 additional compressed air breathing apparatus • Deployment system for 2 single-person reels Vehicle pump/fire extinguishing agent tank: • Firefighting centrifugal pump Schlingmann FPN 2000-10 • Output: 2,000 l/min at 10 bar • Water tank: 1,800 l • Foam tank: 150 l Firefighting equipment: • Fixed quick-attack hose, 50 m long, located on top • Monitor on the vehicle roof Safety and lighting • Ambient lighting on the superstructure • Pneumatic lighting mast • Rear warning device We will gladly provide you with a detailed offer and show you the vehicle in Berlin. Hsdpfozv Eqkox Akronu All information is provided to the best of our knowledge and belief, without guarantee for completeness and accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: used, axle configuration: 3 axles, first registration: 07/2005, color: other, Year of construction: 2005, Empty weight: 4.200 kg Axle 1: left 4-8 mm right 10-10 mm Axle 2: left 10-10 mm right 12-12 mm Hjdszxz Iwopfx Akronu Axle 3: left 4-8 mm right 4-4 mm We have the possibility to stack trailers!