Used Bright Beer Cellar for sale (680)

Condition: used, Year of construction: 2018, Overview These fermenters (iso tank) were manufactured in 2018 by Germany BrauKon GmbH. The equipment consists of 3 fermenters, designed for beer fermentation. The tanks are still installed and connected to energy and are available immediately. The equipment can be visited in production on request. Technical data  - Capacity: 10 hl each - Application: Beer fermentation Lhsdpfxjywn Sve Amzsn - Configuration: 3 × iso fermenters  

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. Lhodoz Ru Iyopfx Amzon The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: excellent (used), functionality: fully functional, tank capacity: 120,500 l, total height: 20,000 mm, inner diameter: 3,000 mm, outer diameter: 3,300 mm, wall material: stainless steel, wall structure: single-walled, number of chambers: 1, operating temperature: 20 °C, operating pressure: 3 bar, Stainless steel pressure vessel, vertical, insulated Technical data / Dimensions Available quantity: 8 Volume: approx. 120,000 liters Vessel type: Pressure vessel Condition: used Food-grade: yes Design: vertical Internal diameter: approx. 3,000 mm External diameter: approx. 3,300 mm Overall height: approx. 20,000 mm Specific gravity of the medium: 10.00 t/m³ Operating pressure: Overpressure Operating overpressure: 3.00 bar Wall thickness, bottom: approx. 6.0 mm Wall thickness, top: approx. 4.5 mm Wall thickness, shell / cylinder: approx. 3.5-5 mm Operating temperature: 20°C Material / Properties Material, inner shell: Stainless steel Material grade: V2A-1.4301 (AISI 304) External surface: Ground, welded seams passivated Welded seams, internally ground: Yes Insulation Insulation present Insulation thickness: approx. 120 mm Insulation material: Mineral wool Material, insulation jacket: Aluminum Insulation jacket: Trapezoidal sheet Equipment Base type: Foot ring / base ring Quantity: 1 Mounting: fixed Bottom type, top: Dished end Bottom type, bottom: Dished end Top: Lhodpfozvh Dtex Amzjn 1 x Insulated dome DN 900 1 x Access opening with dome cover DN600 1 x Valve dome cover with the following connections: 1 x Cleaning-ventilation-valve combination (RLV) DN 50 1 x Vacuum valve, spring-loaded with 2 heating elements and thermostat 1 x Safety valve 1 x Burst disc 1 x Thread DN 50 for probe Shell: 1 x Condensate pipe DN 25 1 x Cable protection pipe DN 32 1 x CIP pipe DN 50 1 x Base ring made of Cr-Ni steel (1.4301) with access opening 600 x 600 1 x Spray pipe with protruding ball head Bottom: 1 x Outlet cup DN 300 1 x Outlet with cover cap, chain, and eyelet DN 80 1 x Connection fitting for sampling tap DN10 Documentation Drawing Inspection log Inspection certificate

Condition: ready for operation (used), functionality: fully functional, Used in-line filler, 6-position, manufactured by ALWID. Lodezfwkhopfx Amzehn

Condition: used, Year of construction: 2019, Overview This lot comprises two VIG pressure tanks of 5,000 litres each, built in 2019 by VIG Vertrieb Industrieller Güter (Kreuztal, Germany). The vessels are CE-marked pressure vessels according to EC pressure equipment directive 2014/68/EU and were last used as activated carbon filters in a brewery’s water treatment. Each tank is fitted with a filter star; the filter candles show light damage. The tanks are interconnected with DN 65 piping and come with butterfly valves for cleaning, draining and shut-off as well as vacuum/check valves. With their young year of construction and availability as a pair, the vessels suit filtration and pressure-holding duties in breweries and beverage plants alike. Lhsdpozpaiusfx Amzon Technical data - Manufacturer: VIG Vertrieb Industrieller Güter (Kreuztal, Germany) - Year of manufacture: 2019 - Number of tanks: 2 - Volume: 5,000 l per tank - Max. operating pressure (PS): 6 bar - Test pressure (PT): 7.8 bar - Operating temperature (TS): 0 - 50 °C - Pressure vessel per EC directive 2014/68/EU, CE-marked - Front manhole on each tank Equipment - Filter star with filter candles in each tank (candles with light damage) - Interconnecting piping DN 65 - 3x M&S butterfly valves (cleaning, draining, shut-off) - 2x vacuum / check valves Condition Used - good overall condition in line with the young year of construction. The filter candles of the filter stars show light damage. The tanks are installed indoors. Availability Immediately. Location: Germany.

Condition: used, Year of construction: 2015, Overview  This tank package was manufactured between 2015 and 2025 by Spanish manufacturers Inox GC and Magusa, as well as German company Linde AG. It includes multiple isobaric and atmospheric fermenters, an electric lifter and a hop torpedo for pressure dry hopping. Technical data & Scope of Delivery  - Isobaric Fermenter (Unit 1) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket - Isobaric Fermenter (Unit 2) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Lhsdpfxsyb S Dve Amzen - Isobaric Fermenter (Unit 3) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket - Isobaric Fermenter | Inox GC | — | 2019 | 2,000 L; cylindro-conical; isobaric; dual glycol jacket - Isobaric Fermenter | Inox GC | — | 2021 | 3,000 L; cylindro-conical; isobaric; dual-wall cooling - Isobaric Fermenter | Inox GC | — | 2024 | 4,800 L; cylindro-conical; isobaric; Double jacket for glycol circulation; carbonation stone in the cone - Atmospheric Fermenter (Unit 1) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket - Atmospheric Fermenter (Unit 2) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket - Electric Lifter | Linde AG | L14 | — | Electric; 1,400–1,700 kg load capacity - Isobaric Hop Torpedo | Inox GC | — | 2025 | Approx. 50 L; vertical isobaric dry hopping vessel; new

Condition: used, Year of construction: 2005, Overview These 8 isobaric pressure tanks (500 hl each) manufactured by Sirio Aliberti in 2005 originate from the wine industry and were previously used for sparkling wine production. With a working pressure of up to 6 bar and full insulation, the tanks are well suited for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, combined with polyurethane insulation and stainless steel external cladding. This design represents a traditional and cost-efficient alternative to stainless steel tanks, which became standard in later years. Thanks to their large volume and isobaric capability, these tanks are particularly suitable for high-capacity production environments. As with all epoxy-coated vessels, regular inspection and renewal of the internal coating is required, depending on operating conditions. TECHNICAL DATA - Manufacturer: Sirio Aliberti - Year of Manufacture: 2005 - Quantity: 8 units - Type: Isobaric pressure tank - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 500 hl per tank Ljdoy Hkkaopfx Amzjhn - Material: Base: Carbon steel Internal coating: Food-grade epoxy Insulation: Polyurethane External cladding: Stainless steel sheet - Working Pressure: 6 bar - Dimensions (per tank): Internal Diameter: approx. 3,200 mm External Diameter: approx. 3,450 mm Cylinder Height: approx. 5,250 mm Leg Height: approx. 1,200 mm Total Height: approx. 7,800 mm

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 35/1997, Beer pasteurizer - Heat exchanger Lhedpfx Amsquuxujzsn Manufacturer APV TYPE / Year 35 / 1997 Capacity 8000 Kg /h Working Pressure 16 bar Max working temp 95 *C

Condition: used, Year of construction: 1985, Overview These 5 insulated pressure tanks (100 hl each) manufactured by TMCI Padovan in 1985 originate from the wine industry and were previously used for sparkling wine production. Due to their pressure rating and full cooling jacket design, they are suitable for fermentation, maturation, and storage of carbonated products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used in the industry before stainless steel became standard. While not as common today as stainless steel vessels, these tanks offer a cost-effective alternative, particularly for producers with lower investment budgets. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. It should be noted that the epoxy coating requires periodic renewal, depending on usage and product type. Technical Data - Manufacturer: TMCI Padovan - Year of Manufacture: 1985 - Quantity: 5 units - Type: Pressure tank with full cooling jacket - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 100 hl per tank - Material:Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding - Pressure Rating: 6 bar Lhsdpfx Amoy Hkkyozsn - Dimensions (per tank):Outer Diameter: approx. 2,200 mm Cylinder Height: approx. 4,000 mm

Condition: used, Year of construction: 1983, Additional title: lying tank in container Capacity: 32 hl Operating pressure: 2 bar Operating temperature: 20 °C Length: 4,65 m Width: 2,3 m Height: 1,95 m Ledpfx Aexbqrqsmzohn Weight: 2500 kg Features: Beer pump, thermometer, gas measurement, flow meter (Diessel), 2 cable drums, hose reel, safety valve, cleaning and filling connection, spray head, manometer, empty detection electrode Control cabinet, compressed air compressor (AltasCopco), pallet for 4 CO2 bottles, valves, pressure reducer

Condition: used, Year of construction: 1992, Overview These 4 isobaric pressure tanks (200 hl each) manufactured by TMCI Padovan in 1992 originate from the wine industry and were previously used for sparkling wine production. With their full cooling jacket design and pressure rating of up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and related products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used before stainless steel became the industry standard. They represent a cost-effective alternative to stainless steel tanks, particularly for producers seeking lower capital investment. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. Due to the coating system, regular inspection and renewal of the epoxy lining is required, depending on usage and product type. Technical Data - Manufacturer: TMCI Padovan - Year of Manufacture: 1992 - Quantity: 4 units - Type: Isobaric pressure tank with full cooling jacket Ljdpfx Amsy Hkl Djzjhn - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 200 hl per tank - Material: Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding - Pressure Rating: 6 bar - Dimensions (per tank): Outer Diameter: approx. 2,200 mm Cylinder Height: approx. 7,000 mm Total Height: approx. 9,000 mm

Condition: used, Year of construction: 2004, machine/vehicle number: DEPAL41, Used ACMI RASAR D200 depalletizerTechnical Specifications & Performance DataThis ACMI RASAR D200 depalletizer is a reliable solution for high-efficiency bottle handling within a used bottling line or second hand industrial packaging environment. Engineered for beverage production and general industrial packaging, it processes layers of bottles from standard pallets with precise and gentle handling. Designed for glass and PET bottle applications, it offers stable performance for multiple beverage categories, ensuring dependable operation in demanding production schedules.Manufacturer: ACMIModel: RASAR D200Year: 2004Machine type: DepalletizerMaximum speed: 16,200 bph (application dependent)Container materials: Glass, PETPallets handled: EPAL 800x1200 mmWorking height: 1200 mmOperating pressure: 6 barSupply voltage: 400 V (3PH + N)Frequency: 50 HzRated current: 51 AAuxiliary voltage: 24 V DCShort-circuit rating: 6 kAElectrical schematic code: EOC3691Approx. layout dimensions: length 14,367 mm; width 4,915 mmAdvanced Automation & Control SystemsThe ACMI RASAR D200 features an industrial-grade automation package centered on a Siemens PLC, delivering robust control, diagnostic capability, and stable operation. The control system supports automatic layer handling with coordinated movements for layer separation and transfer to downstream conveyors. Electrical architecture uses a 400 V three-phase supply with 24 V DC auxiliaries for sensors and control devices, ensuring safe and reliable low-voltage control.Siemens PLC-based control for dependable automation24 V DC auxiliary circuits for instrumentationClear operator interface and status signaling for quick troubleshootingIntegrated interlocks for safe operation and process controlProduction Line Integration CapabilitiesThe depalletizer integrates seamlessly into beverage production lines and broader packaging machinery systems. It interfaces with infeed/outfeed conveyors and can operate as a standalone depalletizing cell or as part of a complete bottling line. The RASAR D200 handles EPAL 800x1200 mm pallets and can be set up for multiple bottle patterns and sizes within glass and PET ranges, supporting flexible changeovers for different end products.Inline or standalone operation modesCompatible with upstream pallet handling and downstream bottle conveyorsDesigned for Glass and PET bottle handling across various sizesSuitable for Water, CSD, Wine, Beer, Spirits, Milk, and Oil applicationsMachine Condition & Maintenance HistoryThis unit is ready for operation and presented in excellent working order. It has been overhauled and is supplied with compatible spare parts. A warranty support period of 6 months is indicated, reinforc... Lhsdpfxs Adtz Re Amzon

Condition: used, Year of construction: 2007, machine/vehicle number: PAL53, Used COMACO PA4B palletizer 10800 BPHTechnical Specifications & Performance DataThe Comaco PA4B is a second hand, overhauled palletizer engineered for reliable end-of-line handling in beverage production and industrial packaging. Built in 2007 and professionally refurbished, this unit delivers robust performance with a maximum throughput of up to 10,800 bottles per hour (3x2 configuration), making it a strong fit for used bottling line upgrades where efficiency and footprint matter.Model: PA4BManufacturer: ComacoYear: 2007Maximum speed: 10,800 bottles per hour (3x2 pattern)Container materials supported: Aluminum cans, PET bottles, Glass bottlesPallet formats: Eur-Epal 800x1200 mm; 1000x1200 mmInstalled power: 1.4 kWElectrical supply: 400 V, 50 HzWorking pressure: 6 barApproximate footprint: 8165 x 7777 mmLayout note: Working height H = 1100 mm (as indicated on layout)Configuration: Conventional automatic palletizer with automatic layer-pad inserterAdvanced Automation & Control SystemsDesigned for dependable automation, the PA4B integrates proven Siemens control technology for stable operation and easy diagnostics. A Siemens Simatic HMI provides intuitive operator interaction, while the Siemens S7 PLC ensures precise motion control and sequencing.HMI: Siemens SimaticPLC: Siemens S7Operational mode: Conventional automatic palletizing with layer-pad applicationChangeover: Practical adjustments for varying pack patterns and container typesProduction Line Integration CapabilitiesThe Comaco PA4B integrates smoothly with upstream packaging machinery such as shrink wrappers, wrap-around case packers, and conveyors. It handles a wide range of secondary packaging units, including bundles, cases, and tray-packs, supporting both PET and Glass bottle lines as well as Aluminum cans.Inline/standalone: Suitable for inline integration or standalone operationHandled units: Bundles, cases, tray-packsMulti-product flexibility: Compatible with water, CSD, beer, wine, milk, oil, and spirits workflowsPallet formats: Eur-Epal 800x1200 mm; 1000x1200 mmMachine Condition & Maintenance HistoryThis palletizer is overhauled, tested, and ready for operation. Supplied in excellent working order with a commercial guarantee, it is an ideal choice for facilities seeking a reliable second hand upgrade with minimized commissioning risk.Status: Ready for immediate useCondition: Overhauled and guaranteedWarranty: 6 monthsSpare parts: Compatible spare parts availableOperational Performance & VersatilityThe PA4B addresses diverse end-of-line need... Lhjdpe Adtzqofx Amzon

Condition: used, Year of construction: 1985, Beer drive transport tank built into trolley, with CIP spray head and manhole. Includes measuring system (max. flow: 120 l/min). Additional title: horizontal tank in container Capacity: 7200 l Operating pressure: 2 bar Ledpfx Amsxbqhxozjhn Operating temperature: 20 °C Length: 7,25 m Width: 2,4 m Height: 2 m Features: control, pump, hose reel, flow meter, cable drum, fittings, CIP spray head, manhole

Condition: used, mileage: 85,643 km, power: 62 kW (84.30 HP), first registration: 07/2013, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2013, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI is a used panel van with initial registration in July 2013 and a mileage of 85,643 km. It features a 2.0-liter diesel engine meeting Euro 5 emissions standards, with an output of 62 kW (84 hp). The manual transmission transfers power to the front wheels. With its bright yellow color, the van offers a distinctive appearance. The vehicle offers practical features for commercial use, such as two side sliding doors and a robust wooden floor in the rear area. The truck registration facilitates commercial use. The combined fuel consumption is 7.2 l/100 km, which is moderate for this vehicle class. The overall dimensions of 4,892 mm in length, 1,904 mm in width, and 1,970 mm in height provide ample cargo space with compact exterior dimensions. Lhsdj Ad R Riopfx Amzen This transporter is suitable for businesses that need a reliable and functional vehicle for their daily tasks. With an environmentally friendly green emissions sticker and a maximum payload of 2,800 kg, it meets many requirements in the commercial vehicle segment. An inspection is possible at any time during business hours without prior arrangement. Sale only to businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, Year of construction: 2016, Overview  This compact filling line for cans and bottles consists of equipment from Wildgoose, Slowbeer, Enos Euro and Millipore and is designed for craft beverage production with flexible batch sizes. The line combines isobaric and atmospheric filling technologies and includes semi-automatic and manual machines for filling, capping, labeling, and product filtration. The core component is a Wildgoose WG1-CE filler (2021), capable of handling both cans and bottles with integrated seaming functionality. With its modular setup, the line is particularly suitable for small to medium-scale producers, pilot production, or specialty beverages such as craft beer, kombucha, cider, or soft drinks. Technical Data  - Capacity: - Up to 24 units per minute (atmospheric – Wildgoose) - Up to 16 units per minute (isobaric – Wildgoose) - Additional manual / semi-automatic filling capacity depending on configuration - Formats: - 20 cl – 1.5 L (depending on machine) - Container types: Lsdpfxoyxr Ans Amzohn - Cans and glass bottles - Application: - Beer - Craft beverages - Kombucha - Cider - Soft drinks - Filling technologies: - Isobaric filling (carbonated products) - Atmospheric filling - Manual filling - Filtration: - 3-stage microfiltration system (Millipore) - Configuration: - Modular / semi-automatic line - Condition: used, good condition Scope of Delivery - Can / Bottle Filler | Wildgoose | WG1-CE | Isobaric and atmospheric filling with integrated seaming; 16 cpm (isobaric) / 24 cpm (atmospheric); formats 33 cl / 50 cl | 2021 - Manual Bottling Machine | SCH | SCHPK6 | 6-spout manual filler; approx. 250 bottles/hour; formats 20 cl – 1.5 L | 2016 - Bottling Machine | Slowbeer | RI4 | 4-spout filler; approx. 350 bottles/hour; formats 22 cl – 1.5 L | 2012 - Labeling Machine | Enos Euro | Base | Semi-automatic labeler; approx. 28–30 units/min; formats 22 cl – 1.5 L | 2017 - Crown Capper (2x) | Slowbeer | Tap Air Corona | Pneumatic crown cappers; crown sizes 26 / 29 mm | 2012 - Microfiltration System | Millipore | 3-stage | Stainless steel construction; 3-stage filtration system | 2016 Additional Information - Seaming unit is integrated in the Wildgoose WG1-CE filler - The line allows flexible switching between can and bottle filling - Ideal for craft production with frequent product or format changes - Compact footprint and modular design  

Condition: used, Year of construction: 2000, Overview These HERPASA self-emptying stainless steel tanks, designed as 30,000 liter autovaciante tanks, are suitable for wine production and similar beverage processing applications. The tanks are installed as a group of vertical stainless steel vessels and are equipped with bottom cone discharge systems for efficient product emptying and solids handling. The tanks are manufactured from AISI 304 / AISI 316 stainless steel and feature a 45° bottom cone, rectangular access doors, cooling jackets, temperature monitoring, product connections, and an internal mechanical extraction / rotating discharge system. The available drawings and photos show a robust industrial tank configuration with cooling surfaces, lower discharge equipment, and external piping for wine circulation or transfer. The tanks are particularly suitable for applications such as fermentation, storage, cooling, wine processing, and controlled product discharge, especially where self-emptying functionality is required. The visible installation includes at least four tanks of similar construction. Technical Data - Manufacturer: HERPASA - Year: 2000 - Tank Type: Self-emptying vertical tank / autovaciante tank - Application: Wine / beverage processing - Capacity: 30,000 liters - Material: Stainless steel AISI 304 / AISI 316 - Tank Diameter: approx. 2,800 mm - Total Height: approx. 7,050 mm - Bottom Cone Angle: 45° - Cooling System: Upper and lower cooling jackets - Upper Cooling Jacket Surface: approx. 8.35 m² - Lower Cooling Jacket Surface: approx. 4.4 m² - Cooling Jacket Connections: R 3/4" water inlet / outlet - Temperature Measurement: Thermometer, range 0 to +60°C Ljdpfx Amoy Uc A Rszshn - Probe Connection: R 1/2" sleeve - Discharge System: Bottom discharge with extraction system - Internal Equipment: Rotating wine diffuser / internal extraction or sweeping mechanism - Access Doors: Rectangular manways / inspection openings - Connections: NW50 and NW65 product connections - Safety Equipment: Safety valves 2 1/2" - Installation: Group of vertical stainless steel tanks with external pipework - Condition: Used, installed in industrial winery environment

Condition: used, maximum load weight: 27,200 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2017, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, loading space volume: 88 m³, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, * Orten SafeServer sliding tarpaulin Lhedpfx Amj Ad Su Aozen * Dekra certified according to VDI 2700 and DIN EN 12642 Code XL * Beverage certificate * Draught beer certificate * Chemical certificate (IBC) * Waste paper certificate * 4 rows of cargo securing * 2,500 kg Bär folding loading platform * Portal doors at the rear * BPW axles * Lift axle * Disc brakes * Fully air-suspended

Condition: used, maximum load weight: 27,200 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2017, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, loading space volume: 88 m³, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, * Orten SafeServer sliding tarp system * DEKRA certified according to VDI 2700 and DIN EN 12642 Code XL * Beverage certificate * Draught beer certificate * Chemical certificate (IBC) * Waste paper certificate * 4 rows of load securing * 2,500 kg Bär under-folding tail lift Lhodpfxs Ad Supe Amzjn * Portal doors at the rear * BPW axles * Lift axle * Disc brakes * Fully air-suspended

Condition: used, Year of construction: 1994, Overview These 2 isobaric pressure tanks (150 hl each) manufactured by TMCI Padovan in 1994 originate from the wine industry and were previously used for sparkling wine production. Designed with a full cooling jacket and pressure resistance up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated products, including beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, representing a widely used technology before stainless steel tanks became the industry standard. They offer a cost-efficient alternative to stainless steel vessels, especially for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, allowing temperature-controlled processing. As with all epoxy-coated vessels, periodic renewal of the internal coating is required depending on usage and product conditions. TECHNICAL DATA Lhodpfjy Hknxex Amzon - Manufacturer: TMCI Padovan - Year of Manufacture: 1994 - Quantity: 2 units - Type: Isobaric pressure tank with full cooling jacket - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 150 hl per tank - Material: Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding - Pressure Rating: 6 bar - Dimensions (per tank): Outer Diameter: approx. 2,400 mm Cylinder Height: approx. 4,000 mm

Condition: used, Year of construction: 2014, Overview Complete 10 hl craft brewery around an Eco Brew Tech 10-20 HL steam-heated two-vessel brewhouse from 2014. One package from milling to bottling: malt mill, brewhouse with wort cooling and oxygenation, hot and cold water tanks, steam generator, three 20 hl unitanks, filtration, an atmospheric filler-capper monoblock, a self-adhesive labeller and a microchiller. 10 hl of cast wort per brew at 12.5 °P, up to 4 brews in 24 hours. Technical data - Brew length: 10 hl cast wort at 12.5 °P; 20 hl in 12 hours, up to 4 x 10 hl per 24 hours - Brewhouse: 2 vessels, AISI 304, steam-heated, PLC with touchscreen and recipe memory - Fermentation: 3 x 20 hl unitanks, AISI 304, 0.49 bar - Bottling: 800-1,000 bottles/h, crown cap - Year: 2014 (microchiller 2018) Scope of Delivery - Malt mill | Robix | ROPPI-1100 | two fluted rollers, adjustable and lockable gap, protective magnets, 1,100 kg/h, 4.8 kW, 400 V / 50 Hz - Brewhouse | Eco Brew Tech | 10-20 HL | mash/lauter tun 1,557 L gross with false bottom, grant, sparging and 1.1 kW bidirectional rake with variable speed; kettle/whirlpool 1,890 L gross with tangential inlet and bottom steam jacket; rock wool insulation, platform and stairs | 2014 - Wort pumps | 2 sanitary pumps for hot and cold wort, 2 kW and 3 kW - Water mixing station | hot and mains water, flow meter and in-line thermometer - Plate heat exchanger | AISI 316 plates, NBR gaskets, wort cooling with hot-water recovery - Wort oxygenation | in-line, porous stone, flow control valve, outlet thermometer - Hot water tank | Eco Brew Tech | HWT | 20 hl working (2,869 L gross), steam jacket, PT100 thermostat, 0.75 kW pump 80 L/min, 24 L expansion vessel | 2014 - Cold water tank | Eco Brew Tech | CWT | 20 hl working (2,869 L gross), glycol jacket, PT100 thermostat, 0.75 kW pump 80 L/min | 2014 - Steam generator | Thermindus | GV INSIEME | 150 kg steam/h, diesel burner, feed-water unit and boiler control panel | 2014 - Unitanks, 3 units | Eco Brew Tech | 20 hl working (2,731 L gross) each, AISI 304, 0.49 bar, 2 independent cooling jackets (side and cone), PT100, pressure gauge, safety valve, CIP spray ball | 2014 - Mixing tank | Eco Brew Tech | 2,200 L, AISI 304 | 2014 - Mobile pump on trolley | 1.5 kW, 200 L/min at approx. 15 m, AISI 316 pump, AISI 304 trolley, for CIP and beer transfer - Cartridge filter | AISI 304 housing, up to 2,000 L/h, cartridges not included - Process pump | EP MINI | 0.37 kW, 3/4" connection Lodpfxoz Sk Aqe Amzehn - Filler-capper monoblock | Idrotecnica | I8C | atmospheric filling, crown capping, 800-1,000 bottles/h | 2014 - Self-adhesive labeller | STS | S2/Z | automatic, 1,000 bottles/h, batch coder | 2014 - Microchiller | Keyter | KWF2009 | process cooling | 2018 Condition Used, still installed. Inspection on site is possible. Availability Immediately. Location: Spain.

Condition: used, Standing stainless steel tank: Nozzles and connections: In the bottom: 1 x outlet nozzle extended to the front, ending in 2 x DN 50 threaded connections In the top: 2 x threaded nozzles DN 25 On the shell: 1 x oval manway with swing bolt 1 x nameplate 1 x threaded nozzle Nominal capacity: approx. 8,500 l Internal diameter: 1,900 mm Cylindrical height: approx. 2,500 mm Total height: approx. 3,590 mm with 700 mm ground clearance Perm. operating overpressure: 1.5 bar Perm. operating temperature: 20 °C Material: Stainless steel V2A (1.4301) Wall thickness (bottom): 3 mm Wall thickness (top): 3 mm Wall thickness (shell): 3 mm Tank standing on three robust legs Lodpfx Amjxxknajzehn Otherwise as per images

Condition: used, Year of construction: 2013, Overview  This complete brewhouse was manufactured between 2011 and 2013 by various European manufacturers, including spanish manufacturer SlowBeer. It is for sale as the current owner is unable to dedicate sufficient time to its operation due to other business commitments. The brewhouse is currently dismantled and stored in Spain. Optional services such as dismantling, transport, and installation are available upon request. Technical data  - Brewhouse capacity: 250 liters per batch - Production cycle: approx. 2 weeks per batch - Bottling cycle: 1 day per batch - Production months/year: 10 months Lhjdpjwcyc Defx Amzsn - Shelf life of beer: 18 months - Heating method: Electric (1 Hot Liquor Tank used), Butane option available (unused) - Fermentation tank capacity: 500 liters each (3 tanks) - Brewing system power: 15 kW - Cooling system power: 2.3 kW - Labeling power: 2 kW Scope of Delivery  - 1 x Brewing Unit | SlowBeer | MB 250 E | 2013 - 1 x Plate Heat Exchanger | Sondex Italia | S4A-IG16 | 2013 - 3 x Fermentation Tanks | — | — | — (500 L each, atmospheric) - 1 x Cooling Unit | Winus | C2-W3R 4T | 2012 - 1 x Isothermal Hot Water Tank | Industrias Céspedes | — | 2011 - 1 x Labelling Machine | CDA | R1000 | — - 1 x Filling Machine | Toscana | — | — - 1 x Manual Capping Machine | — | P0085 | — - 1 x Coder | — | MC150V | 2013 - 1 x Electric Mill | SOMMER | 11717 | — - 1 x Compressor | FINI | — | — - 1 x Compressor | MADER | YL90S-2 | 2012 (100 L tank) - 1 x Steel Water Heating Tank | — | — | — (900 L) - 2 x Water Softeners | — | — | — - 2 x Hot Liquor Tanks | — | — | — (1 electric, 1 butane-based – unused) Optional Services: Dismantling, transport, and installation – available upon request.  

Condition: used, Year of construction: 2002, Overview  This tank package was manufactured in 2002 by Spanish company Parcitank S.A., a recognized producer of stainless steel tanks for the wine and food industry. The nine tanks are suitable for fermentation or storage depending on their configuration. The set is offered as three packs, each consisting of one 20,000 L fermentation tank, one 15,000 L storage tank, and one 10,000 L storage tank. On request, single packs can also be purchased. All tanks are made of AISI 304 stainless steel and are in good condition. Technical data  - Fermentation tanks - 200hl (3 units): - Capacity: 20,000 L - Diameter: 2,500 mm - Cylindrical height: 4,000 mm Lodpfx Amexbua Sjzohn - Type: Atmospheric with cooling jackets - Storage tanks - 150hl (3 units): - Capacity: 15,000 L - Diameter: 2,500 mm - Cylindrical height: 3,000 mm - Type: Atmospheric - Storage tanks - 100hl (3 units): - Capacity: 10,000 L - Diameter: 2,000 mm - Cylindrical height: 3,000 mm - Type: Atmospheric - Material: AISI 304 stainless steel Scope of Delivery - 9 stainless steel tanks (3 × 200 hl, 3 × 150 hl, 3 × 100 hl) - Optional: Sale in complete set or in 3 individual packs (1 × 200 hl + 1 × 150 hl + 1 × 100 hl)

Year of construction: 2009, condition: used, machine/vehicle number: ISP18, Used HEUFT empty bottle inspector 72000 BPHTechnical Specifications & Performance DataThis Empty Bottle Inspector (EBI) is engineered for high-speed beverage production and industrial packaging environments. Manufactured by HEUFT, the system combines a HEUFT InLine reflexx Release 9 inspector with a HEUFT Spectrum SX TB 72 pre-selection unit, networked for complete bottle flow control. Designed for integration in a used bottling line, it offers robust inspection performance for returnable glass bottles at line speeds up to 72,000 bottles per hour.Manufacturer: HEUFTPrimary model: InLine reflexx Release 9Pre-selection unit: Spectrum SX TB 72 (with Gateway II network interface)Additional platform reference: Spectrum TXYear of manufacture: 2009Maximum capacity: 72,000 bottles/hourBottle formats: Compatible with 0.33L and 0.5L bottle formatsContainers: Designed for Glass bottle handling (green, brown, flint)Closures handled (format identification): Crown cap, screw-cap threading, mechanical swing-topElectrical supply (InLine): 3-phase 400/415 V; 230/240 V phase voltage; 50/60 HzElectrical supply (plate data): 3-phase + N + PE 400/230 V, 20 A; 1-phase 230 V, 4 APower (Spectrum TX): 3.3 kW (continuous active power) at up to 72,000 containers/hPneumatics: 6–10 bar operating pressureIncluded handling: Infeed/outfeed conveyor sections and reject accumulation/discharge tableAdvanced Automation & Control SystemsThe inspector leverages HEUFT reflexx image processing with comprehensive optical inspection and residual liquid detection. The Spectrum SX TB 72 pre-selector verifies bottle geometry upstream, ensuring only conforming containers enter the main EBI. The Gateway II interface enables network connectivity for line data exchange and coordinated rejection logic.Full sidewall inspection at infeed and dischargeNeck and mouth integrity verification, including thread check for screw-cap bottlesResidual liquid detection via IR and HF technologiesSupplementary neck-area sensor to identify trapped labelsTest-bottle recognition for continuous rejection accuracy monitoringOperator control via integrated unit controller with synchronized pre-selectionProduction Line Integration CapabilitiesDesigned for seamless integration into high-speed beverage production, the system supports inline operation with existing conveyors and accumulation. Its pre-selection and main inspection units communicate over the network to optimize rejection precision and minimize false rejects, making it an excellent fit for second hand bottling equipment upgrades or complete used bottling line retrofits.Inline or stand-alone deployment with included conveyor interfacesNetworked pre-selection and main inspection for coordinated controlCompatible with standard glass beer formats (0.33L, 0.5L) Lhjdpfx Ams Adt I Rjzjn