Used Bulk Feeder for sale (3,109)

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Hfodjxf Up Ujpfx Aqgon Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063530, Technical Characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable, made of Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Offers rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system allows axial or radial displacement up to 600 mm for lathe servicing. - Automation: Fully PLC controlled with brushless motor and digital pneumatic valves for speed and thrust regulation. - Bar Storage: Single-level magazine with a 235 mm load capacity. Bar Feeder: TOP Automazione Model: FU 352 Hedpfxsxx R Nqe Aqgofn - Dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI digital controller for manual operations. Machine Status: WORKING - Set of guide channels and accessories for bar clamping worn - Set of bearings for pusher head worn

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063528, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Hsdsxx Si Ejpfx Aqgefn Machine status: - In working condition

Condition: used, RETSCH Ultra Centrifugal Mill / Laboratory Mill / Fine Grinding RETSCH ZM 200 Ultra Centrifugal Mill incl. DR 100 dosing unit and extensive accessories For sale is a used ultra centrifugal mill from the manufacturer RETSCH, including a DR 100 dosing unit and extensive accessories as shown in the pictures. The ZM 200 is suitable for rapid fine grinding of various materials and for use in laboratories, research, development, and quality control. Technical data ZM 200: Manufacturer: RETSCH GmbH Type: ZM 200 Equipment type: Ultra Centrifugal Mill Power connection: 1~ 200–240 V Frequency: 50/60 Hz Power according to nameplate: 1100 W Current consumption: 12 A Dimensions (L × W × H): approx. 515 × 410 × 365 mm CE marking Dosing unit: RETSCH DR 100 Dosing unit for controlled material feed with adjustable dosing speed Interfaces ZM 200: Connection for DR 100 RS232 RS485 Equipment: RETSCH ZM 200 Ultra Centrifugal Mill RETSCH DR 100 dosing unit Digital control and display panel Feeding hopper Collection container Rotor / grinding tool as shown in the pictures Numerous ring sieves / sieve inserts in various designs Several hoppers and stainless steel parts Further extensive original RETSCH accessories as shown in the pictures Application areas: Laboratory and research Fine grinding Sample preparation Material testing Quality control Research and development Scope of delivery: 1 × RETSCH ZM 200 Ultra Centrifugal Mill 1 × RETSCH DR 100 dosing unit 1 × Operating manual ZM 200 1 × Operating manual DR 100 Feeding hopper Collection container Rotor / grinding tool as shown in the pictures Numerous ring sieves / sieve inserts Various hoppers, containers and accessories Further accessories as shown in the pictures Weight approx. 45 kg Condition: Used Signs of wear The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. Hjdozxqhyepfx Aqgofn We are happy to answer further questions by telephone.

Year of construction: 2003, operating hours: 18,000 h, condition: used, functionality: fully functional, Bar feeder with automatic bar feeding system for bars with a diameter of 3 to 32 mm. It was functioning perfectly until it was replaced with a newer model. It is not possible to see it in operation because it is not connected to the CNC machine. Hedpfxozrw Dus Aqgsfn For information on troubleshooting and maintenance, please contact Italmatic, which is the product’s representative in Spain.

Condition: new, This offer is for a new ‘BDT VX 370’ long-sheet feeder Item for sale: 1 x BDT VX 370 for the following machines: Canon imagePRESS V1350 incl. S-Bridge Hjdeyuuc Iopfx Aqgefn Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: excellent (used), functionality: fully functional, KUVERTANLEGER Wahli Feeder . Hjdpoupmzqefx Aqgsfn

Condition: good (used), Year of construction: 1999, functionality: fully functional, 1 x Bar feeder Iemca CH 220/32 Year of manufacture: 1999 Bar machining diameter: 2 - 20 mm Bar length: 3200 mm Built-in channel: 16 mm Previously used with a CNC long turning lathe Star SA 16 The bar feeder can be inspected at our warehouse at any time. Hedsz Hpnfjpfx Aqgofn

Condition: used, all stainless steel nett width 600 mm 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 power: 2 x 0,95 kW Grill opening: dia. 14-22 mm Hfedpfx Aqez Rl Htsgsn dimensions : ± 2.700 x 1.400 x 1.000 mm

Condition: excellent (used), Year of construction: 1974, Catalog number: 7685 TECHNICAL DATA - inlet width: 440mm - inlet height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen dimensions: 50x50mm - toothed drive shaft, top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (with adjustable speed) - with conveyor belt - length of feed belt: 4006mm - width of feed belt: 380mm - belt feed direction: forward/reverse Hsdpfezruc Uox Aqgjfn - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight: approximately 2000kg ADVANTAGES - German-made - with conveyor belt - auto-reverse - used shredder, very good condition Net price: 76,900 PLN Net price: 17,880 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Year of construction: 1997, operating hours: 30,000 h, condition: used, functionality: fully functional, OVERHAUL in 2022 New reinforced table – 660x960mm No support leg /it is available for mounting, but the program needs to be updated/. It has a new controller and can operate in sheet feeding mode. Price: 80,000 PLN Below are the specifications: Effective forming area 650 x 950mm Table stroke 300 mm Film width Up to 700 mm Hedpfszt Sukjx Aqgsfn Installed power 15 kW Heating panel power 13 kW Pneumatic table lifting 0.4 MPa Compressed air consumption 5 m3/h Thickness of forming material 0.15-6mm Performance in cycles per hour 40 - 100 Weight approx. 250kg Dimensions: depth x width x height 1250mm x 2230mm x 2040mm

Condition: used, functionality: fully functional, We offer 20-foot bulk containers. A 20-foot bulk container is a standard ISO container that has been modified for the transport of free-flowing bulk goods. It has loading hatches in the roof and discharge flaps at the end. This allows it to be filled from the top and emptied by tilting, without the need to package the goods in bags. It is particularly suitable for grain, seeds, and similar dry bulk goods (wheat, corn, barley, rice, soybeans, etc.). ✅ CONTAINER TYPE: 20-foot bulk container ✅ DELIVERY CONDITION: used, wind and watertight, cargo worthy, original images ✅ COLOR: Gray ✅ DIMENSIONS L x W x H: According to ISO standard External dimensions: 6,058 x 2,438 x 2,591 mm, internal dimensions: 5,898 x 2,352 x 2,390 mm, door dimensions: 2,338 x 2,280 mm, volume: approx. 33 m³, weight: depending on the design, 2,200 – 2,400 kg ✅ ADVANTAGES: Bulk containers save on packaging, can be loaded and unloaded quickly, and are still stackable and can be used in multimodal transport (ship, rail, truck) in regular container traffic. ✅ TRANSPORT: Please provide us with your postal code so that we can prepare a free and non-binding offer for containers including delivery and, if necessary, unloading from the truck. ✅ VARIETY: You can also find a wide range of sea containers in all common sizes (20DV, 40DV, 20HC, 40HC, etc.) and for every need. Whether for storage, construction projects, logistics solutions, or sea transport. We look forward to hearing from you! Hfjdpfx Aqoz R Nz Nogon NAUTEXA GmbH

Condition: new, New Conveyor with overhead feeder hopper Both units are mobile on castors Feeder hopper with opening end door, adjustable exit gate to conveyor Feeder hopper dimensions 800mm x 740mm x 600mm deep Conveyor belt dimensions 1800mm x 230mm W x 1260mm H Conveyor height is adjustable Hsdpewd Nthjfx Aqgjfn VFD on conveyor drive

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 770155, spindle bore: 42 mm, spindle speed (max.): 7,000 rpm, We are offering this very well-maintained INDEX C100 multi-spindle automatic lathe with an Index MBL bar feeder and fine cleaning system, manufactured in 2009. If you have any questions or require further information, please do not hesitate to contact us via message or by phone. Hfsdpfx Aqjz E Ikpjgsn

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, bar length: 4,000 mm, bar diameter (max.): 42 mm, 4m feeder and 5 sets of bushings Hfedpfx Aqev Im Uljgen

Condition: good (used), functionality: fully functional, units span 1350mm Hodpfx Aqezz Nizogofn two motors 5,5kW feeding from magazine hydraulic feeder manual regulation of top pressure

Condition: ready for operation (used), 3-roller feed mechanism Manufacturer: Vegoma Hedpfxoz Iz Iyo Aqgsfn Type: Vario 3 3-4 revolutions/min Left/right rotation

Condition: ready for operation (used), Year of construction: 2008, bar length: 3,200 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Bar change time 27 sec. Feed rate 150 mm/sec. adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 900 kg Hedpfx Aqjw Rfiwsgjfn

Condition: used, functionality: fully functional, type of input current: AC, input voltage: 230 V, Non-STOP envelope feeder StenzFeeder for printing machines in the quarter-sheet format segment with bar or suction head feeder. Fully functional. Includes delivery belt. Hfedpfjw Ix Insx Aqgjn

Condition: used, Year of construction: 2012, functionality: fully functional, control type: PLC-controlled, actuation type: electric, bar diameter (min.): 6 mm, bar diameter (max.): 50 mm, power: 2 kW (2.72 HP), input voltage: 400 V, Bar feeding system by Irco Breuning Simag 50.1R 3000 bar lengths up to 3000 mm maximum capacity 50 mm guide rods of 15, 22, 30, 45 mm various collets Hfsdezz Hubepfx Aqgsn

Condition: excellent (used), Year of construction: 2004, MAIN INFORMATION Capacity and Working Area • Model: Mazak Integrex 200 MkIII • Control: Mazatrol PC Fusion 640 MT Pro • Year: 2004–06 • Serial No.: 169996 • Network: LAN connection • Condition: The machine is in very good technical condition and has been very well maintained. • Mainly used for machining aluminium and plastic. • Max. turning diameter: 530 mm • Max. turning length: 1,000 mm • Bar capacity: 65 mm • Spindle bore: 76 mm Axis Travels • X-axis: 580 mm • Y-axis: 160 mm • Z-axis: 1,045 mm Spindles and Axes Main Spindle • Speed: 5,000 rpm • Power: 15 kW • C-axis: 360° full interpolation Milling Spindle • Speed: 12,000 rpm • Tool holder: Capto C6 • Through-spindle coolant B-axis • Angular range: -30° to -190° • Full indexing Tooling and Magazine • Tool magazine: 40 positions • Tool measuring arm: Yes • Tailstock: MT5 Auto • Chuck: Kitagawa B-210, 10-inch 3-jaw chuck • Collet chuck: SMW AUTOBLOK KSB-MB-A60 • Smartshift BASE quick coupling for robot • Parts catcher: Yes Hfedpfx Aqezwhdcegon • Parts collector: Yes • Chip conveyor: Mayfran • Bar feeder: STC Super 65 Included Documentation • Photos of the machine • Video of the machine in operation • Service history (photo) • Manuals • Electrical diagrams • Complete machine manuals • Complete programming manuals • Complete maintenance manuals Machine Strengths • Multitasking machine with both turning and milling capabilities • Full 5-axis interpolation (C + B) • Capto C6 milling spindle with 12,000 rpm • Large machining capacity: 530 mm diameter / 1,000 mm length • 40 tool positions • Through-spindle coolant • Integrated robot interface (Smartshift BASE) • STC Super 65 bar feeder

Condition: excellent (used), Year of construction: 2003, Haver & Boecker SWA/MECII-20 Loading System Haver & Boecker SWA/MECII-20 bulk loading system with weighing scale for loading trucks or wagons with bulk materials. Suitable for free-flowing, non-dusty bulk materials. Description: Brand: Haver & Boecker Type: SWA/MECII-20 Year of manufacture: 2003 Temperature range: -10 °C / 40 °C Voltage: 230V Hjdpfx Aqsg Sfa Tegefn Frequency: 50 Hz Pneumatic pressure: 5 bar; Max 40 kg, Min 10 kg Dimensions: Section I: L2.43 x W187 x H310 Section II: L240 x W240 x H310 Haver net weighing system with frame Weighing and discharge electronics MEC II-20 for controlling weighing and/or machine functions Advantages: • High level of operating comfort • Simple programming • PTB and OIML approval • 99 product type memories • Operator guidance via clear text display in 6 selectable languages Operator terminal BT 15 For automatic remote adjustment of product types, including motorized adjustment of sack length/width parameters. You can find more new and used items in our shop! International shipping costs available upon request!

Year of construction: 2005, condition: excellent (used), diameter: 1700 mm Hfjdofd E R Aspfx Aqgsn Stainless steel

Condition: like new (used), functionality: fully functional, Hydraulic feeder type 814 300 Hjdpfeyi Afmex Aqgsfn 80 m/min. Motor power: 5.5 kW Control panel Year of manufacture: 1991

Condition: used, Year of construction: 2013, overall weight: 5,000 kg, FANUC Series 32i-MODEL B control unit, with TOP AUTOMAZIONI XF365 linear guide. Workholding devices and tools not included. Hfodpfx Aszxrz Usqgjn AVAILABLE: November 2026