Used Busch Mm 1324 A V03 for sale (110,276)

Condition: new, For sale: high-quality BOA compensating (flexible) hose made of stainless steel, designed for industrial applications. 📋 Technical data: Manufacturer: BOA Type: SP20 (Ringwellschlauch) Nominal diameter: DN50 Length: 1100 mm Working pressure: PN16 Connections: flanged Material: stainless steel (INOX) Construction: corrugated hose + steel braid Certifications: DIN / VdS ⚙️ Applications: industrial installations water and gas systems heating and steam systems compensation of vibrations and thermal expansions protection of pumps and fittings 📦 Condition: Lsdpfoyzixljx Akyjrk New – old stock (NOS) Possible minor storage marks (visible in the photos). Product fully functional, unused. ✅ Advantages: high resistance to temperature and pressure very good flexibility durable stainless steel construction reduction of vibration and noise in the installation 📸 Included in the offer: Exactly what is shown in the photos.

Condition: new, For sale: High-quality steel compensator (compensating hose / Ringwellschlauch) from the renowned brand BOA, designed for industrial applications. This component is used for: - compensation of thermal expansion - vibration and noise damping - reduction of stresses in piping systems Manufactured from stainless steel 1.4404 (INOX), it is perfectly suited for demanding operating conditions (water, gas, industrial, and process installations). ⚙️ Technical Specifications Manufacturer: BOA Nominal diameter: DN125 Length: 1500 mm Pressure rating: PN16 Material: stainless steel 1.4404 (INOX) Type: compensating hose / steel compensator Connections: flanged Construction: corrugated hose with stainless steel braid Standards: ISO 10380 / DIN 📏 Dimensions Approx. internal diameter: 125 mm Total length: approx. 1500 mm ✅ Benefits ✔ reputable manufacturer BOA ✔ excellent corrosion resistance ✔ long service life ✔ vibration and stress damping ✔ flexible design Lodpfx Akjyzirxsyork ✔ fast installation (flanged) 📦 Scope of delivery 1x compensator DN125 (as shown in the photos)

Condition: used, Rotary vane vacuum pump Manufacturer: Busch Type: R5 RA 305 D Voltage: 50/60Hz 400V Nominal suction capacity: 300m³/h Ultimate pressure: 0,5hpa(mbar) Status: Refurbished Warranty- 12 months Ljdedbbzdepfx Akyjrk Included: Motor re-storage, repainting, electrical check Delivery time: ex stock

Condition: used, Waelz piston pump booster Manufacturer: Busch Type: Panda WV 0500 C/B and Panda WV 1000 C/B available Suction capacity: 500 - 1000 m³/h Warranty: 12 months Lredpfxob Rgxns Akysk Status: Refurbished Delivery time: by arrangement

Condition: as good as new (ex-display), Rotary vane vacuum pump Oil lubricated Manufacturer: Busch Lrjdpfxjc Sy Tqo Akyek Type: RA 0016C Included: Oil filling Status: Feed unit Warranty: 12 months Delivery time: after arrangement

Year of construction: 2016, condition: as good as new (ex-display), Rotary vane vacuum pump oil circulation lubricated Manufacturer: Busch Lrjdpfx Aec S D Dhekyek Type: R5 RA 250D Status: Feeding device Warranty: 12 months Fuel: Mineral oil Accessories: Intake filter Delivery time: ex stock

Condition: good (used), Rotary vane vacuum pump Status: Refurbished; As good as new Warranty: 12 months Delivery time: ex stock Manufacturer: Busch Type: R5 RA 255D Motor: 400V Operating medium: mineral oil Nominal suction capacity: 250m³/h Ultimate pressure: 0,5 mbar (abs.) Accessories: Operating instructions; Oil filling (mineral oil); Vacuum suction filter Ljdpfx Akocipmusyjrk Delivery time: ex stock (subject to prior sale) If you have any questions about vacuum technology, please do not hesitate to contact us.

Condition: used, Rotary vane vacuum pump Manufacturer: Busch Ljdpfx Aksdbbzijyork Type: R5 RA 302 D Voltage: 50/60Hz 400V Nominal suction capacity: 300m³/h Ultimate pressure: less than 0,5hpa(mbar) Status: Refurbished Warranty- 12 months Included: Motor re-storage, repainting, electrical check Delivery time: ex stock

Year of construction: 2010, condition: used, Waelz piston pump booster vacuum pump Ljdpfjdnvgtsx Akyjrk Manufacturer: Busch Type: Puma WP 1000 D2 Status: used, tested A complete overhaul can be offered as an alternative. Then with 12 months warranty on the device.

Condition: used, Rotary vane vacuum pump & oil lubricated Quantity: 5 pcs Status: Overhauled Warranty: 12 months Manufacturer: Busch Type: RA160D Voltage: 50/60Hz 400V Motor rated power: 4KW Nominal suction capacity: 160m³/h Ultimate pressure: 0,5hpa(mbar) Included: Operating manual, spare parts list Lrodsbdgdljpfx Akyjk Delivery time: ex stock

Condition: good (used), Rotary vane vacuum pump oil circulation lubricated Manufacturer: Busch Type: RA 1600 B Status: Refurbished or tested and serviced available Ledpsd Hh Nkjfx Akyork Warranty: up to 12 months Suction capacity: approx.1000m³/h Ultimate pressure: approx. 0,5 mbar Operating fluid: Mineral oil (Included) Delivery time: 1-2 Wo.

Condition: like new (used), Rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Busch Type: R5 RA 0630 B Status: Waiting, very good condition, second-hand Warranty: 6 months suction capacity: 630 m ³/h Beriebsmittel: Mineral oil Accessories: inlet filter Delivery time: In stock Ljdpfx Akjdf Ikdjyerk

Condition: used, Rotary vane vacuum pump Lrodpfedf Imvox Akysk Oil lubricated Manufacturer: Busch Type: RA 0100F Status: Feeding device Warranty: 12 months Delivery time: after arrangement

Year of construction: 2008, condition: excellent (used), Screw pump Manufacturer: Busch Ledpfx Ajd Rafbekysrk Type: Cobra DS 600 E Status: very good condition Delivery time: from stock

Year of construction: 2016, condition: like new (used), screw vacuum pump Manufacturer: Busch Type: Cobra NC 0400 B Status: As good as new Warranty: 6 months Lrjdpfx Asfbmnaekyjk

Condition: like new (used), Year of construction: 2012, Pump Stand Screw Vacuum Pump & Roots Vacuum Pump Manufacturer: Busch Type: Cobra NC 0630 B + WV 2000 C Status: As New, Refurbished Warranty: 6 Months Lrodpfx Aksv I Ak Neyok

Condition: as good as new (ex-display), Manufacturer: Busch Type: Mink MV 0312B Engine: DS 400V Lredpfefbl Dfox Akysk suction power: 290 m³/h Ultimate pressure: approx. 150 mbar (abs.) Delivery time: short-term

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: Lrjdpfxomhhype Akyjk 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Lodemhh Dhjpfx Akysrk - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Lredpjmhh Dzjfx Akyok We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Lodpfx Aomhhx Iskyerk - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard Lodpfx Akemhhyasyerk - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Ljdpfx Ajh Ek Daskyjrk When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: Lsdpfx Aksmhh Anjyjrk 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) Lodpfx Akjmidyfeyork - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.