Used C&U Ball Bearing for sale (74,669)

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Nodpfx Asz Dvfxsgrjlg Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Condition: ready for operation (used), Year of construction: 1973, functionality: fully functional, machine/vehicle number: 162 026, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, table load: 15,000 kg, TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 2,000 mm Travel range, Z-axis: 1,250 mm Travel range, W-axis (spindle stroke): 700 mm Table size: 2,000 × 1,500 mm Table load capacity: 15,000 kg Table rotation: 360° Table indexing: 1° Spindle speed: 8–800 rpm MACHINE DETAILS Position measuring system: Heidenhain linear scales EQUIPMENT Nljdpfxsz Ahabj Agrog Heidenhain linear scales

Condition: good (used), Year of construction: 2023, operating hours: 972 h, machine/vehicle number: 0223, Offer 26174 Technical data: - Bending capacity - Pipe at 45 kg / mm² Ø 6 - 48 mm - Wall thickness up to 3.25 mm - Max. bending radius 180 mm - Bending speed 20 °/sec. - Drive 400 V / 2.4 kW Nedpfx Aszh Elxjgrjlg - Space requirement approx. W 6200 x H 1200 x D 1000 mm - Weight approx. 1100 kg - Operating hours recorded 972 h - with - Digital bending angle display + fine adjustment of bending angle - with SIEMENS SIMATEC control panel with touch screen - Mandrel bending unit 4.5 m with hydraulic retraction - Saw unit - Deburring unit for internal and external deburring - Pipe positioning system - Bending tools without mandrels - 6, 8, 10, 12, 16, 20, 22, 28, 30 mm - Partially, possibly incomplete

Year of construction: 2019, condition: new, Brand NXZ Model: 6316, 6318, 6319, 6320, 6326, 6328, 30224, 30315, 30316, 30324, 30328, 30330, 32221, 32315, 32316, 32317 Year of construction: Unused Weight (kg) approx 11360 Njdpfjqa An Uex Agrjlg Made in China Comments Single packed or wrapped, packed in cartons by multiple pieces Selling condition Selling as full quantity only

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 602/02, center width: 4,000 mm, center height: 415 mm, spindle speed (max.): 1,600 rpm, controller model: Control System Euro Turn, TECHNICAL DETAILS Maximum turning height: 415 mm Turning diameter over bed: 830 mm Turning diameter over slide: 540 mm Distance between centers: 4,000 mm Spindle bore: 130 mm Spindle speed: 2–1,600 rpm MACHINE DETAILS Control method: Teach-in Control system brand: Monforts Control system type: Control System Euro Turn Nsdpfx Agoz Ebbzerjlg Power: 55 kW Dimensions & Weight Dimensions (L x W x H): 6,750 x 2,100 x 2,020 mm Net weight: 7,500 kg Transport packages: 2 units EQUIPMENT Documentation CE marking

Year of construction: 2019, condition: used, For sale: a partial injection molding cell consisting of a hydraulic press, a linear Cartesian robot, and a perimeter safety fence. This system is ideal for those seeking a ready-to-use package for molding and automatically unloading parts. The package includes only the 3 items listed below: 1. HYDRAULIC INJECTION MOLDING MACHINE Brand and Model: ARBURG ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN (200 tons) Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Machine weight: approximately 6,500 kg 2. LINEAR CARTESIAN ROBOT Brand and Model: STAR AUTOMATION XW-1000VI 2V Year of manufacture: 2019 Configuration: 3 servo-assisted linear axes (brushless motors), space-saving telescopic vertical arm. Included: Control cabinet, original operating keyboard (remote control) for programming, and manuals. Nedpfxozw H Dbj Agrslg 3. PERIMETER SAFETY FENCE Manufacturer: Star Automation Europe Features: Modular structure with a metal mesh to protect the work area. Access door equipped with safety microswitches and an interlocked electric lock. Included: External control panel for access requests and emergency chain reset.

Condition: used, functionality: fully functional, operating hours: 1,733 h, overall weight: 150 kg, PRODUCT DESCRIPTION & TECHNICAL DATA For sale is a professional industrial 3D printer, model 3DGence INDUSTRY F340. The machine was used in a controlled environment, regularly maintained, and has very low operating hours for an industrial system. The printer is characterized by its robust construction (approx. 90 kg), high mechanical precision, and the ability to process demanding technical plastics without warping. Thanks to the actively heated build chamber (up to 85 °C), materials such as nylon (PA) or polycarbonate (PC) can be printed reliably and with excellent layer adhesion. Furthermore, unlike conventional desktop or prosumer systems, the INDUSTRY F340 meets all thermal and mechanical requirements for processing high-performance plastics such as PEEK (polyetheretherketone). The combination of high extruder temperature and the actively heated build chamber ensures controlled cooling behavior and prevents thermal stresses (warping) in the component. The system is therefore ideally suited for replacing metal components. It enables the additive manufacturing of components with extreme continuous use temperatures (up to 250 °C), excellent chemical resistance, and outstanding mechanical strength values – making it ideal for highly stable applications in the aerospace, automotive, and medical technology industries. KEY DATA: Manufacturer: 3DGence Model: INDUSTRY F340 Operating hours: 1,733 h Build volume: 260 x 300 x 340 mm (X/Y/Z) Weight: approx. 90 kg (heavy-duty industrial mechanics on ball screw spindles) Connection: 230V SCOPE OF DELIVERY & PRINT MODULES: 3DGence INDUSTRY F340 base machine PRO module: Standard module for PLA, ABS, PETG, PA, carbon fiber reinforced material... HT module: High-temperature module up to 340 °C nozzle temperature for warp-free processing of PC-ESD, PC or CF-PC, unused/in original packaging. Original price was €3500. Integrated, actively heated filament drying chamber (up to 70 °C) for moisture-sensitive materials. CONDITION, SERVICE & MAINTENANCE INFORMATION: The machine is in very good and well-maintained condition, both visually and mechanically. Future-proof and investment protection: The long-term availability of original spare parts, consumables and system components (such as the interchangeable print modules) is fully guaranteed, which ensures a high level of operational safety and reliability in productive use. Njdpjzrt Agefx Agrolg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,446 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle motor power: 22,000 W, table load: 300 kg, number of slots in tool magazine: 41, number of axes: 5, This 5s HAAS UMC 750 was manufactured in 2013. It features a spindle speed of 12,000 rpm and a tool capacity of 41 tools, making it suitable for various machining tasks. The machine offers a maximum table load of 300 kg and includes advanced coolant systems for efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS UMC 750 universal machining center we have for sale. Contact us for further details. • Spindle type: Inline direct drive • Tool holder: SK40 • Tool changer: SMTC • Rotary technology: 2 axes with support bearing • B-axis range: −35° to +110° • C-axis range: 360° • Clamping surface: Ø 630 × 500 mm • Coolant system: standard coolant, P-Cool, through-spindle coolant (TSC) • Renishaw probing: WIPS system with workpiece probe and tool measurement • Control functions: 8M functions, rotate and scale • Memory: 16 MB • HSM: High Speed Milling • Rigid tapping: yes • Cycle time hours: 5,446 h • Power-on hours: 21,246 h Nodpfxoyid Hvs Agrelg Technical Specification Taper Size SK 40

Condition: refurbished (used), Year of construction: 2014, overall weight: 25,000 kg, Doppstadt DW 3060 Buffalo type C - Year of construction 08/2014 - Operating hours 7275 - Engine Mercedes Benz 430 HP - AD Blue - Roller : 21 teeth Nsdpsygnk Aofx Agrjlg - Overband magnet - Remote control - Hydraulic drive ( self drive) Machine is overhauled and immediately available

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available - Njdoy Ehrxepfx Agrjlg

Condition: used, Axial deep groove ball bearings, axial deep groove ball bearings, thrust ball bearings, thrust bearings Nsdpjf S Nclofx Agrolg -Manufacturer: FAG, axial deep groove ball bearing 51164PM, OVP -Outer diameter: 400 mm -Dimension: Ø 400 x 65 mm -Weight: 18.4 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMU 80 P duoBlock Year of construction: 2011 Control system: Heidenhain iTNC 530 Technical data: Travel ranges: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 800 mm Main spindle: Max. spindle speed: 18,000 rpm Rotary table: Table diameter: d 900 x 700 mm Tool changer: Tool holder: HSK-A63 Nledpfx Ajz Ebzuegreg Number of tool positions: 60 Operating hours: approx. 49,285 h Spindle hours: approx. 15,380 h Technical features & accessories: - Universal milling head with controlled B-axis - Coolant tank 500 l - Internal coolant supply 40 bar - Chip conveyor with integrated fabric band filter - Rotating viewing window - Infrared measuring probe, manufacturer Heidenhain TS 649 (if available) - Preparation for 3D quickSET - Signal tower, 4 colors - Flushing gun - Cooling system with compressed air through the spindle center - Electronic handwheel (if available) - Operating mode 4 Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: BE 05.20.1920, SHRINK TUNNEL KALLFASS COMPACT 650 S WITH FOIL PACKAGING MACHINE UNIVERSA 500 Commission No.: 25.156.72 Equipment / Additional information: WITH FOIL PACKAGING MACHINE UNIVERSA 500 (M. No.: M 05.20.1614 // Commission No.: 25.156.72) Technical Specifications Adjustable working height: 800 – 900 mm Tunnel opening width and height: 650 mm, 200 / 400 mm Length of heated tunnel hood: 1200 mm Power supply: 208 – 480 V Temperature: continuously adjustable up to 190°C Conveyor speed: 5 – 17.5 meters/minute Installed heating power: 13.5 kW Nedpfsz D U N Asx Agrolg Advantages Suitable for PE and PO films Maintenance-free plastic modular belt Consistent heat transfer for perfect packaging results Efficient energy recirculation via ring-nozzle heating technology High-quality insulation and compact design for rapid heat-up times Easy adjustment of basic parameters Constant operating temperature without extreme fluctuations Easy maintenance thanks to carefully selected components

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 300 h, Equipment: ABS, The printer is in almost new condition and has been used very little. Nodpfez Ep Dkex Agrelg

Condition: used, Year of construction: 2008, Wire erosion / EDM Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 310 mm max. workpiece size X: 1050 mm max. workpiece size Y: 820 mm max. workpiece size Z: 300 mm max. workpiece weight: 1000 kg with AWF ( Automatic Wire Feeding ) U / V axis: 200 / 200 mm submerged cooling unit FANUC Series 310iS-WA5 control Automatic Wire Feeding (AWF) Additional precision rotary/indexing unit by Detlev Hofmann 6 axes according to the machine control Chiller included Work area lighting Nedpfx Agoz D U H Ujrjlg Glass scales on X/Y axes Touch probe Work tank interlock and wire break detection Machine weight: approx. 3,000 kg Connected load: 13 kVA

Condition: new, Partially unpacked for photography – unused item from a warehouse clearance. FAG Schaeffler Deep groove ball bearing Nedpfxezgbu Hs Agrslg DIN 625-61864-M

Year of construction: 2019, operating hours: 61 h, condition: good (used), Brotech Graphics Co., Ltd. Model: CDF Plus 330 Year of manufacture: August 2019 Working width: 330 mm LED UV LAMP: ONLY 61 hours of operation Maximum web width: 340 mm Electrical supply: 380 V / 3P + N + PE / 50–60 Hz / 45 A Condition: Very good / very low usage Availability: Immediately The machine has only a few hundred operating hours. The exact operating hours can be confirmed once the engineer is on site. _____ MACHINE CONFIGURATION UNWINDING & WEB HANDLING • Professional unwinding system • Maximum web width: 340 mm • Maximum unwind diameter: 800 mm • 3" pneumatic spindle • Electronic web guiding system • Edge-reading web guide sensors Njdpfxjz Ea E So Agrslg • Adjustable roll-diameter monitoring • Automatic slowdown / stop at roll end • Web-break monitoring • NIP roller • Waste spindle • Rewinding system The complete machine layout incorporates an Unwinder, Rewinder, NIP Roller, unwind spindle, rewind spindle and waste spindle. _____ ROTARY FLEXO PRINTING UNIT Integrated professional rotary Flexo printing station suitable for: • Spot colors • Varnishing • Coatings • Primers • Special applications • Cold foil applications • Lamination applications Flexo Specifications Maximum web width: 340 mm Minimum web width: 100 mm Maximum printing width: 330 mm Substrate thickness: 40–250 microns Maximum speed: up to 120 m/min Repeat range: 60T / 190.5 mm up to 184T / 584.2 mm The Flexo unit includes: • Ink tray • Ink roller • Anilox roller • Doctor blade system • Plate cylinder • Lamination unit • UV curing system • Chilling roller The technical documentation confirms the 330 mm printing width, substrate range and maximum production speed of up to 120 m/min. _____ LED UV CURING SYSTEM The machine is equipped with an integrated LED UV drying / curing system, offering an efficient solution for UV Flexo inks, coatings and varnishes. The LED UV technology offers advantages such as: • Immediate curing • Lower heat transfer to the substrate • Suitable for heat-sensitive materials • Reduced energy consumption compared with conventional UV systems • Stable production at higher speeds • No conventional UV lamp warm-up time _____

Condition: good (used), Year of construction: 2007, Universal machining center Machine type: DMG DMU 80 P duoBLOCK Control: Heidenhain iTNC 530 Year: 2007 SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 800 mm Y-Axis: 800 mm Z-Axis: 800 mm B-Axes C-Axis Panning head Rapid motion: (X/Y/Z): 60 m/min. Spindle speeds: 12.000 rpm Spindle power: 28 / 19 kW Tool: SK 40 Toolchanger Tool capacity: 60 NC rotary table Table size: 900 x 700 mm Max. Table Load: 1.400 kg Nlodsz Dkunspfx Agrsg Equipment Internal cooling: bar Chip conveyor Electronical handwheel

Condition: used, Year of construction: 2008, For sale is a vertical CNC machining center, MAZAK VCN-510C-II, manufactured in 2008. The machine comes from an industrial facility and is offered including the accessories and tool holders shown in the pictures. Technical data: Manufacturer: MAZAK / Yamazaki Mazak Model: Vertical Center Nexus VCN-510C-II Year of manufacture: 2008 Serial/Part No.: C22U5630050 Control: Mazatrol Matrix Nexus Travel distances X/Y/Z: approx. 1,050 / 510 / 510 mm Table size: approx. 1,300 × 550 mm Tool magazine: 30 positions Spindle speed: up to approx. 12,000 rpm Tool holder: SK40 Power supply: 3-phase, 400 V / 50 Hz Control circuit: AC 100 V / DC 24 V Rated connected power according to the nameplate: 33.1 kVA Weight: approx. 7,100 kg Dimensions: approx. 2,750 × 2,800 × 3,800 mm (W × H × L) Various tool holders and other accessories shown in the photos are included. Please refer to the pictures to determine the scope and exact assignment of the accessories, or check during an inspection. The machine shows signs of wear and tear due to age and use. Inspection is possible by arrangement. Nedpfxjz D Dg Do Agrolg Loading, transport, and disassembly must be coordinated with the buyer in advance. Sale preferably to commercial enterprises. Subject to errors and prior sale.

Condition: used, Year of construction: 2005, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.000 mm Control 840 D Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A63 swivellable B: -30 / +180 ° swivle time 1,2 s numbers of pallets 2 size of pallet 1.000 x 800 mm max. workpiece weight 1.500 kg rotatable C: 360 ° Nedpfxswf Rgfs Agrelg number of toolpositions 180 pos. tool taper HSK-A63 total power requirement 78 kVA weight of the machine ca. 27,0 t dimensions of the machine ca. 8,0 x 7,0 x 3,4 m 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rotary (C-Axis) - pallet changer - 180-pos. tool-changer - WITHOUT zero point clamping system - WITHOUT RINGLER exhaust - WITHOUT tools

Condition: like new (used), Year of construction: 2014, ROBOT BRAND: ABB MODEL: IRB 1600-6/1.45 TECHNICAL DESCRIPTION PAYLOAD: 6 KG MAXIMUM REACH: 1450 MM YEAR OF MANUFACTURE: 2014 CONTROLLER: IRC 5 SOFTWARE: 6 WELDING EQUIPMENT FRONIUS TPS 4000 WITH WATER COOLING Nlodpfx Aez Erdyegrog 3-AXIS ABB IRBP R 300

Condition: used, Year of construction: 2017, overall weight: 120 kg, Equipment: documentation/manual, ABB IRB 360-8/1130 FlexPicker Nlodjz Euakopfx Agrjg Manufacturer: ABB Model: IRB 360-8/1130 FlexPicker Robot type: Delta/Parallel robot, 4-axis Design: High-speed pick-and-place industrial robot Payload: up to 8 kg Reach: approx. 1,130 mm Application area: Pick & Place, sorting, packaging, assembly, and material handling Controller: ABB IRC5 Mounting: Ceiling mounting Drives: Servo motors Axes: 4 Protection class: depends on the specific design Application areas: Food industry, packaging technology, pharmaceutical industry, consumer goods industry, and general automation Description: 1 x ABB FlexPicker robot IRB360-8/1130 1 x IRC5 Single 1 x Handheld control panel FlexPendant DSQC679 1 x Gripper, Schunk GmbH 1 x Various spare parts The robot is disassembled. An inspection in Karlsruhe is possible. Description for the advertisement: The ABB IRB 360-8/1130 FlexPicker is a fast, 4-axis delta industrial robot for automated pick-and-place applications. The robot is designed for high cycle rates and precise handling and is particularly suitable for sorting, packaging, assembly, and transferring products. The design with a payload of up to 8 kg and a working range of approx. 1,130 mm enables its use in various automated production facilities.

Year of construction: 2022, condition: used, machine/vehicle number: B2212/041, Wavelengths, scan head aperture, marking head position, IP rating, power and much more can be configured to suit your application needs. Flexibility is built-in. With print speeds up to 2,000 characters/sec. and line speeds up to 900 m/min., these marking lasers address both simple and complex code requirements on a range of substrates including paperboard, glass, painted metals and many plastic materials. This flexibility makes the C-Series lasers well suited for laser marking applications in various industries: for automotive parts, electronic components, plastic parts, cables, and many more. Marking your products on-the-fly or when stationary, with simple date codes or complex graphics, the C.0102 and C.0302 offer cost effective solutions to your part marking challenges. Nedpfsym N Ipox Agrelg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 550 mm, turning length: 520 mm, turning diameter: 350 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 579 mm, spindle motor power: 18,500 W, total height: 1,700 mm, total length: 3,000 mm, total width: 1,600 mm, overall weight: 4,500 kg, chuck outer diameter: 250 mm, spindle nose: A2-6, bar diameter (max.): 76 mm, controller model: FANUC 18i-TB, Equipment: documentation/manual, CNC turning center with FANUC 18i-TB control. Main spindle with 10" chuck, equiped with subspindle and Live tool (C-axis) Nedpfxeyywufe Agrolg max turning diameter ~13.8" (350 mm), max turning length ~20.5" (520 mm), bar capacity ~3.0" (76 mm), and spindle bore ~4.0" (102 mm).

Condition: used, Year of construction: 2015, functionality: fully functional, KNOLL Chip Removal Central System with Pump Technology 25,000 Liters Systems with Pump Technology A conveying and filtering system with pump technology is suitable for the fully automatic transport of chips from several machining centers to a central filtration unit. The coolant serves as the carrier medium. This system is particularly advantageous in production areas with a large number of machines. It has a space-saving design and is flexible in terms of height. The user has all the options to freely arrange and rearrange their machine park. The maintenance and care effort is low. Areas of Application The closed-loop system is suitable for the fully automatic return of the chip/coolant mixture from several machining centers to a central separator/filter. This supplies the machines with cleaned coolant. The system is used in large production areas with a machine park of 30 or more machines and as an isolated solution (wet machining). Features • High flexibility in the installation or rearrangement of the machine park • Low space requirement due to above-ground pipelines • No system components within the floor of the hall • Low maintenance and care effort Nodpfxoz D Uz So Agrelg Main Components • Chip conveyor (optional) • Chip shredder (optional) • Return pump stations • Return line piping • Chip pre-separator (optional) • Dirty and/or clean tank • Coolant filter system (e.g., band filter or backwash filter) • Supply pump(s) • Supply line piping • Pressure boosting stations, central or decentralized (optional) • Control technology • Downstream chip processing system (optional)