Used Cartacci 7 V 0 for sale (105,923)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: 996294, battery capacity: 625 Ah, battery voltage: 48 V, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 830 x 630 x 630 mm Weight: 1,500 kg Battery voltage: 48 V Battery capacity: 625 Ah Battery type: 5PzS625 Battery performance: measured at 51.38 V EQUIPMENT Battery from former Linde service Dodpfx Aoyk Ecwjdrscn All dimensions are rounded figures. No guarantee is given for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on site, at buyer’s own risk. Collection ONLY with email payment confirmation! Collection WITHOUT prior appointment Monday to Friday, 7:00–16:30. If the mast is too high for transport, removal can be arranged on request. In case of late collection, a storage fee of €20 per machine per day will apply (payment due before pickup).

Condition: good (used), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Djdpfxozg Tl Ro Adrocn Test chamber volume: approx. 1000 L Test chamber dimensions (W x D x H1/H2): 1400x800x800/1020 mm Door opening dimensions (W x H): 1300x680 mm Housing external dimensions (W x D x H): 2162 x 995 x 2080 mm Operating temperature range: 5°C > ambient temperature to +80°C Heavy-duty design for a load capacity of up to 350 kg Process control: Beckhoff PLC, color touch screen display, 50 memory locations for test procedures, 50 memory locations for test segments, ramps: Humidity and temperature control over the entire working area, Ethernet connection Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar, tap connection 3/4" external thread for connecting an ion exchange cartridge Compressed air: 7-8 bar Wastewater: siphon / 30 mm ID hose nozzle Exhaust: pipe end AD 75 mm Operating modes: Salt spray Condensation water (CWC) Ventilation with ambient air Warm air Controlled humidity

Condition: like new (used), Looks like new, with no signs of use. Comes from surplus stock of a closed factory, therefore we cannot guarantee that it is completely brand new. Dcedpfoydpxiox Adron

Condition: as good as new (ex-display), Demonstration machine Standard equipment: Solid machine frame Long feed table Optimal price/performance ratio Noise protection hood Dcjdpfjvrvxbex Adrsn Digital display of width and height settings 100% Made in EU (developed, built, quality-tested) Technical data: Planing width (finished size) min./max. 25 - 180 mm Planing height (finished size) min./max. 10 -105 mm Min. workpiece length (individual workpiece) 350 mm With group feed 250 mm Feed table length 1700 mm Cutter shaft speed 6000 rpm Spindle diameter 40 mm Planer head diameter 120 mm Clamping length of vertical spindles 120 mm Clamping length of horizontal spindles 190 mm Feed speeds 6/12 m/min Feed roller diameter 120 mm Motor power feed 0.8/1.1 kW Motor power horizontal spindles 4 kW + 4 kW Motor power vertical spindles 4 kW + 4 kW Motor output at 100% duty cycle 17.1 kW Extraction connection: 2 x 120 + 1 x 150 mm Weight approx. 950 kg Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, This vertical machining center, including the "Clamex unit," is for sale and has seen only a few hours of operation. The machine is being sold because we have switched to a nesting machine. In 2021, the machine was upgraded with a more powerful vacuum pump (16.3 m³). The machine also includes various vacuum clamps; we purchased several larger plates in addition to the standard equipment. Workpiece size: X = 200 - 3200 mm (longer with additional support) Y = 70 - 1200 mm (= max. opening) Material thickness: Z = 8 to 70 mm Max. contour milling dimension in X-direction without clamping: X = 1500 mm Max. contour milling dimension in Y-direction: Y = 985 mm, less milling cutter radius Max. drilling dimension horizontally in X-direction: H = 1168 mm Z-axis stroke: Z = 240 mm Maximum programmable speed: Vector speed: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Milling spindle 7830, power: 7.5 kW (S6), air-cooled with HSK-F 63 tool holder n(max.) = 1000 - 24,000 min-1, continuously adjustable with collet chuck with HSK shank, ceramic ball bearing (hybrid bearing), tool weight max. 6 kg (incl. holder) Tools: max. Ø 110 mm, tool length max. 80 mm Tool changer 7887, 6-position magazine - pick-up system, pneumatic, max. Ø tool: Ø 110 mm Maximum tool weight: > 5 kg per tool or 30 kg when fully loaded Can be equipped with collet chuck with HSK shank Tool changer 7874, 1-position aggregate magazine, swiveling in X and Y directions, only for special bevel gear 7869 with HSK holder Vertical spindles can be activated individually Arrangement in L-shape, 5 in X and 4(5) in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end Dedpfx Aez In Ugodrscn (depending on plate thickness) Spindle extension stroke: 70 mm Direction of rotation: alternating right/left n(max.) 1000 - 4400 min-1, continuously adjustable Holder: M 10 thread - parallel seat 11 mm without tool, without holder 6 horizontal spindles 2 double drilling spindles in X-direction 1 double drilling spindle in Y-direction Holder: M 10 thread, parallel seat 11 mm Total drill length max. 63 mm from mounting end without tool, without holder Sawing unit Integrated sawing unit for sawing/grooving in X-direction n(max.) 1000 - 5650 min-1, continuously adjustable Tool holder: A max Ø = 120 mm, I Ø = 20 mm, B = max. 4.0 mm 4-axis “CLAMEX” tool set - Incl. original tool set consisting of 2 pcs. P-system slot milling cutter, DP (diamond) 100.4x7x30mm, Z3, NLA 4/6,6/48mm 1 pc. Milling arbor for P-system slot milling cutter S20x50mm, d=30, L=102, DTK 48mm 1 pc. Milling arbor for P-system slot milling cutter S16x55mm, d=30, L=68, DTK 48mm 1 pc. CNC drill 6mm for Clamex P, L= 57.5 / shank 10x27 / left 1 pc. Adapter for drill with shank d= 10 mm (left) 1 pc. Collet DIN 6388 form B, double slit, size 25 Clamping diameter 20, for HSK-F 63 holders

Condition: used, WE NEED SPACE: Direct from mold making: MACHINE LID MAHO DMC 70 V Control system Heidenhain TNC 426, manual control panel HR 410, X/Y/Z 700x550x500, spindle taper 40, 18000 rpm, tool changer with 30 positions, direct path measurement, internal coolant system 40 bar, enclosed cabin, Dedezwdfvepfx Adrscn chip conveyor, LTA emulsion mist extraction, year of manufacture 1999, only 14,400 spindle hours * Machine from the first owner, has only been used as a standby machine for some time, test runs and geometric measurements possible at any time. * Price ex works plus VAT, internal transport and loading included.

Year of construction: 2020, condition: new, Exhibition machine with AD 2000 Year of construction 2020 Compressor system HOS Suction capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation Filling capacity at 6 bar working pressure Maximum pressure 10 bar Tank capacity 270 l Number of cylinders 2 Number of compression stages 2 PU 1 Dimensions and weights Dedpfx Ajxg Ux Ejdrscn Length approx. 720 mm Width/depth approx. 720 mm Height approx. 1770 mm Weight approx. 160 kg Electrical data Output power 4 kW Supply voltage 400 V Mains frequency 50 Hz Noise emission Sound pressure level Lp 80 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Availability: short term Storage location: Flörsheim

Condition: new, Unit from surplus stock of closed factory Dcedpfsydp Ecjx Adrsn

Condition: good (used), Year of construction: 2021, Becker VTLF2.500/0-79 Vacuum pump 2021, speed 950 min -1, Power 11Kw, Inlet capacity 490 m3/h, Max vacuum 250 mbar, 3Ph Dcjdpfx Adsz E S Dasren

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.239, 🛠️ Heavy-Duty Portal Milling Machine WALDRICH SIEGEN Type V/H-FR A heavy-duty and powerful portal milling machine from WALDRICH SIEGEN is offered for sale, ideally suited for machining large and heavy workpieces. The machine comes from a renowned German manufacturer and impresses with its extremely robust construction, high base precision, and excellent suitability for modernization. 💡 Special Feature The machine is sold as-is (not overhauled) and therefore offers an ideal opportunity for customer-specific modernization (e.g. new CNC control, electrics, measuring systems) – perfect for buyers who want to implement their own solution. ⚙️ Highlights ✅ Portal design with fixed cross rail for maximum rigidity ✅ High performance: 58 kW main drive ✅ Speed range up to 1,800 rpm ✅ Two machine tables with automatic coupling ✅ Extremely high load capacity up to 100 tons ✅ Ideal for retrofit / CNC upgrade Dcsdpfsdkmihex Adron ✅ Perfect for heavy-duty machining 📊 Technical Data 🔹 Clamping surface per table: 2,500 x 4,000 mm 🔹 Clamping surface (coupled): 2,500 x 8,700 mm 🔹 Max. workpiece weight: ➡️ per table: 50 t ➡️ coupled: 100 t 🔹 X-axis travel: up to 9,503 mm 🔹 Y-axis travel: 5,515 mm 🔹 Z-axis travel (ram): 1,000 mm 🔹 Spindle power: 58 kW 🧰 Equipment ✔️ Tool changer (chain magazine, 60 positions) ✔️ Angle heads (RAA), including universal angle head ✔️ Spindle extension ✔️ Chip conveyor ✔️ Automatic accessory changing system 📍 Location Germany 👁️ Inspection Inspection possible at any time by appointment 📦 Availability Available at short notice 📩 Contact Contact us now for further information, pictures, or a customized offer!

Condition: excellent (used), Manufacturer: ARBURG Type: Allrounder 375 V 500-170 Control system: Selogica-direkt Year of manufacture: 2013 Operating hours: 36163 h Technical data, clamping unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum mold thickness: 302 mm Opening stroke: 225 mm Rotating platen diameter: 900 mm Ejector force: 70 kN Centering of moving platen diameter: 125 mm Mold weight: 230 kg Technical data, injection unit Screw diameter: 25 mm Injection volume: 59 cm³ Injection pressure: 2500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 Nm Number of heating zones: 5 Dimensions & Weight Machine dimensions L x W x H: 3m x 1.6m x 3.48m Total weight: 3540 kg Equipment • Screen text in German • Rotating platen • Hydraulic core pull (1x) • Machine with water manifold • Machine without material hopper • Leveling elements • EUROMAP 67 handling interface • EUROMAP 73 interface • Interface for ejector plate locking Djdpjzyn Exsfx Adrjcn

Condition: used, Year of construction: 2021, operating hours: 6,500 h, * Hitachi ZX250 LCN-7 * Year of manufacture: 2021 * 6,500 hours * 140 kW Isuzu engine * 28,300 kg * Variable boom extension * OQ80SW, fully hydraulic quick coupler * Air conditioning * Central lubrication system Dodpoznq T Ujfx Adrjcn * 270° camera * GPS preparation

Condition: good (used), Year of construction: 1998, Chassis, electric motor, DC motor, traction motor, drive motor, steering valve, control block, steering motor -Manufacturer: Sichelschmidt, control block from electric forklift M 1510 V -Base block: Hawe SK 7650-HST3-Rö4 -Dimensions: 210/110/H130 mm -Weight: 4.2 kg Djdpfsi Dbzgex Adrocn

Condition: new, Type MX5117B+V-380 Work table dimensions 1130x670 mm Spindle speed diameter 30 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Dsdpfx Aeqxtfkedrjcn Transport dimensions 1650x700x1600mm Weight 391 kg Price 2360 Eur (EXW Jonava, Lithuania)

Condition: new, Type MX5117B+V-480 Work table dimensions 1130x670 mm Spindle speed diameter 30 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Number of wheels(pcs)-4 Dcsdpfxsqxtdxs Adrsn Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 394 kg Price 2490 Eur (EXW Jonava, Lithuania)

Condition: used, Year of construction: 2014, functionality: limited functionality, machine/vehicle number: 10257-1, Technical characteristics: # Payload Capacity: Basket size 670 x 480 x 300 # Tank capacity: 3 tanks x 2300 L # Washing chamber capacity: 1100 L Dedpfxsxwm Dbj Adrecn # Ultrasonic equipment: 4000W, 25kHz # Average load weight approx. 100 kg; maximum 150 kg # Machine weight: 6000 kg Electrical Equipment # Operating voltage: 400Vx3 # Connected load: 80 kVA / rated current 152A Dimensions # Machine dimensions (L×W×H): 2000 × 2850 (With Sonowatt 4500) × 2500 mm Equipment consists of: # Main machine LPW / Automation conveyor + Ultrasonic SONOWAT unit Machine status: Main machine WORKING – vacuum pump needs replacement (in stock), safety switch on operator panel needs replacement Ultrasonic Sonowat NOT WORKING – ball screw of 2nd rinsing bath worn out

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving platform Load capacity of the moving platform: 50 kg for VT3 7012 S2 All-round grids in the moving platform secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The hot chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Dedpjx Exmtjfx Adrocn Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Refrigerating unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation | Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_2K in the steady state in the moving platform Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2015, operating hours: 6,105 h, load capacity: 2,000 kg, fuel type: diesel, mast type: duplex, construction height: 2,150 mm, Linde H20D-01 Duplo 315 Sideshift, 6105 hours, VW Diesel, 2015, inspection valid until 7-2027. Dcedpfxszr Ei Es Adren A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call beforehand, as we are not always available. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 4, This 3-axis HAAS VF 7/50 was manufactured in 2017, featuring extensive axis travels with X-Axis at 2,134 mm, Y-Axis at 813 mm, and Z-Axis at 762 mm. It supports a maximum workpiece weight of 1,814 kg and includes a spindle speed up to 7,500 rpm. Ideal for robust machining tasks, consider the opportunity to buy this HAAS VF 7/50 vertical machining centre. Contact us for more information about this machine. • Spindle-to-table distance: 127–889 mm • Table • Dimensions: 2,134 × 711 mm Dsdpfjx Imrpjx Adrjcn • T-slots: 5 • T-slot width: 125 mm • Max workpiece weight: 1,814 kg • Spindle • Tool holder taper: CT 50 • Tool magazine • Tool capacity: 30 + 1

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Dcsdpfx Ajqa Txqedren Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: new, Bernardo belt grinder MS 75 x 2000 DC-2 / 400 V Technical specifications belt dimensions 75 x 2000 mm Dsdpjpag Tdjfx Adrscn Belt speed 18 / 36 m/sec. contact wheel Ø x W 200 / 75 mm surface grinding table 500 x 75 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 520 mm Height 1130 mm Weight approx. 104 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12931*19911, Year of construction: 2020, This forklift is a returned lease vehicle. The technical data corresponds to the original invoice; the seller assumes no liability for this information. Box-frame chassis Box frame, bolted tanks, mudguards, 2+2 crane lugs – step on the left side, handrail on the left side – external rearview mirrors on the fender, high-mounted, per pair – driver protection roof, steel construction – mudguards front/rear Drive system (diesel engine, transmission, drive/steering axles) – standard engine air filter, 2-stage element, with insert & indicator – wheel nut protection (10–25 t) – ZF automatic transmission 4WG-191-B – Volvo TAD-881-VE (requires ZF-191), 185 kW/1175 Nm/1600 rpm / 7.7 L / 6 cylinders EU Stage V – engine pre-heater 220 V, electric – Turbo II heavy-duty air filter – Kessler drive axle D91 (W = 4600 mm) Load-sensing hydraulic system with pressure and flow control (low energy consumption) Variable displacement piston pumps, return filter (10 µm) – hydraulic functions for lifting, tilting, and spreader, 1 joystick, power steering – pressure accumulator for lift mast 60 bar/2L (shock absorbing) – Hydraulic Long Life Filter (HLL), 12,000 h, 3 µm, change every 4,000 h – hydraulic oil tank pre-heating (I) – additional hydraulic oil cooler Electrical system 24 V electrical system, monitoring system, CAN-Bus, 7” color display MD4 – LED lights (position/indicator/headlights) & LED work lights (2 on fenders, 2 on mast, 2 rear lights) – additional LED work lights (3000 lumen) on lamp console – qty 4 – Additional LED work lights (3000 lumen) on the boom – qty 2 – additional LED work lights (3000 lumen) on the front fenders – qty 4 – lamp console on the cab roof – reverse alarm – LED beacon (on lamp console) – one (1) 400V/3-phase power outlet for all heaters Electronic machine control (EMC) EMC Master incl. MD4 controller, 7" touch color display (A) – EMC 106 complete monitoring (engine, transmission, hydraulics, levers/joystick & service) – EMC 114 electronic joystick with RPM ramp-up – EMC 123 ECO drive module (fuel functions & settings) – EMC 124 driver login (up to 20 logins) – EMC 125 data logging module (alarm+error) – EMC 129 hour meter – EMC 122 maximum speed (specified 20 km/h) Dcsdpfeylyi Isx Adron OPTIMA – Driver's Cabin Cabin Optima (L x W x H = 1605 x 1480 x 1620 mm) – solid cab, 1 joystick, ventilation, 3 wipers – opening window (right+left), interior rearview mirror (right) – Electrical 24V / 10A / 12.5mm socket / front right – coat hooks (2x) on rear wall of cabin (left and right) – additional trainer seat, 2-point belt, left side – driver seat Isringhausen ISRI 6830KA/870 (air suspension, heating, ventilation, 3-point belt) – DAB/analog radio with Bluetooth, MP3, AUX, USB, 2 speakers – variable wipers front/roof/rear window – ACC air conditioning – electrical 24V / 10A / 12.5mm socket / cab roof right – electrical 12V / 10A / 21.4mm socket / front right – electric cab heater including power socket – long sun visors (roof and front window) – additional rearview mirror (left side) –

Condition: used, axle configuration: 3 axles, first registration: 02/2008, color: other, Year of construction: 2008, Empty weight: 7.353 kg Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right 10 mm Dodpoz A Ifusfx Adrocn

Condition: new, Extraction capacity of filter unit at spigot*: 600/720* m³/h Total power consumption*: 0.42 kW Operating voltage: 230 V, 50/60 Hz,1Ph+N+PE Noise level*: 67 db(A) Dimensions L/W/H in mm: approx. L 800 / W 493 / H 415 Colour: RAL 7035 Weight: 53 kg Manufacturer: ISI Industrieprodukte GmbH * Depending on the filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for small to medium-sized machine workrooms. Your advantages: - Compact dimensions - High-efficiency EC fan as standard - Adjustable speed and air output (optional) - Washable pre-filter - H13 particulate air filter separation rates of up to up to 99.95%. - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With our TEBARON, we offer a compact air filtration unit which meets today's diverse possibilities of processing and the possibilities of machining and the resulting pollutant profiles. The TEBARON is a compact air filtration unit for small to medium to medium-sized machine workrooms for the separation of emulsion mist. Our main development goals were compact dimensions with maximum energy efficiency economical operation due to low follow-up costs and maximum sustainability. To achieve these goals, we use highly efficient, controllable EC fans in the TEBARON-series we use highly efficient, controllable EC fans. The standard, integrated pre-filter package consists of three parts and is completely washable! It is highly effective against liquids and large to medium particles to protect the main filter and maximise its and maximise its service life. The main filter can be individually adapted to the adapted to the application application. In the standard version, we use an H13 HEPA filter to achieve a filtration efficiency of 99.95% against particles of of 0.3 μ. Dsdoh Rynqepfx Adrocn

Condition: new, Extraction capacity of filter unit at spigot*: 600/720* m³/h Total power consumption*: 0.42 kW Operating voltage: 230 V, 50/60 Hz,1Ph+N+PE Noise level*: 67 db(A) Dimensions L/W/H in mm: approx. L 800 / W 493 /H 415 Colour: RAL 7035 Weight: 53 kg Manufacturer: ISI Industrieprodukte GmbH, Germany * Depending on the filter equipment Special voltage or special colour on request Your advantages: - Compact dimensions - ISI-TRONIC as standard - Electronically controlled EC fan as standard - Adjustable speed and air flow - Washable pre-filter - H13 particulate air filter provides separation rates of up to up to 99.95%. - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life Dcsdpfx Aeh Rynujdren - Quality Made in Germany With our TEBARON, we offer a compact air filtration unit which meets today's diverse possibilities of processing and the possibilities of machining and the resulting pollutant profiles. pollutant profiles. The TEBARON is a compact air filtration unit for small to medium to medium-sized machine workrooms for the separation of emulsion mist. Our main development goals were compact dimensions with maximum energy efficiency economical operation due to low follow-up costs and maximum sustainability. To achieve these goals, we use highly efficient, controllable EC fans in the TEBARON- -series we use highly efficient, controllable EC fans. The standard, integrated pre-filter package consists of three parts and is completely washable! It is highly effective against liquids and large to medium particles to protect the main filter and maximise its and maximise its service life. The main filter can be individually adapted to the adapted to the application application. In the standard version, we use an H13 HEPA filter to achieve filter to achieve a filtration efficiency of 99.95% against particles of of 0.3 μ.