Used Chisel Grinder, Chisel Sharpener for sale (1,763)

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, grinding width: 240 mm, Knife grinding machine WEINIG Rondamat 168 Bedpfx Ajufcnqod Aswl Max. tool diameter 3500mm Disk diameter 150mm Tool length 240 mm Main cutting edges up to 25° Motor 1, 1 kW

Year of construction: 2023, condition: new, Mill for fine grinding of flour, coffee, dried vegetables, spices and more.. grinding range from 20-120mesh. capacity 100-400kg per hour. engine speed 3400 per min. machine weight 600kg. The power needed to operate the machine is 11kW. The machine has an additional dust filtration extraction. The whole machine is made of SUS304 stainless steel. PayPal payment available!!! Bwodpfek S Rpusx Ad Aol

Condition: excellent (used), Year of construction: 2009, grinding length: 1,200 mm, grinding width: 600 mm, total length: 3,500 mm, total width: 1,875 mm, feed length X-axis: 1,320 mm, feed length Y-axis: 730 mm, feed length Z-axis: 480 mm, feed rate X-axis: 1,320 m/min, feed rate Y-axis: 730 m/min, grinding wheel diameter: 350 mm, table length: 1,200 mm, table load: 1,400 kg, table width: 700 mm, Surface grinder LGB France - R12070SM MACH-ID 9600 Make: LGB France Type: R12070SM Year: 2009 X - Travel: 1320mm Y - Travel: 730mm Z - Travel: 480mm Table Length: 1200mm Table Width: 700mm Table load: 1400 Bjdpfxoy Edcto Ad Ajwl Grinding stone dimensions:350 x 50 x 127mm Power: 16kW Speeds: 1500Rpm Length: 3500mm Width: 1875mm Height: 2250mm Weight: 4500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1973, Storage location: Nattheim Bsdpfxovvkt Uj Ad Ajwl

Condition: used, Swiveling aggregate, chain width 10 mm Bwedpjvvku Eofx Ad Ajl Storage location: Nattheim

Condition: excellent (used), Year of construction: 2007, grinding length: 1,200 mm, grinding width: 200 mm, total height: 2,750 mm, total length: 5,200 mm, total width: 2,700 mm, feed length X-axis: 2,200 mm, feed length Y-axis: 1,240 mm, feed length Z-axis: 630 mm, table length: 2,000 mm, table load: 3,000 kg, table width: 1,200 mm, overall weight: 9,800 kg, power: 20 kW (27.19 HP), grinding wheel speed: 1,200 rpm, Surface grinder LGB France - R-12020 MACH-ID 9599 Make: LGB France Type: R-12020 Year: 2007 X - Travel: 2200mm Y - Travel: 1240mm Z - Travel: 630mm Table Length: 2000mm Table Width: 1200mm Table load: 3000 Grinding stone dimensions:450 x 80 x 127mm Power: 20kW Speeds: 1200Rpm Length: 5200mm Bodpfxey Ec Ihe Ad Aewl Width: 2700mm Height: 2750mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, Model: Mechanical or CNC with touch panel Bwsdpfxsyz St Sj Ad Ael Circular saw with stellite or alternate set teeth Sharpening in one pass with a large amount of water!! Tooth profiles: All standard tooth profiles Blade diameter: Circular saw blades up to 1000 mm Blade thickness: 0.6 - 6.0 mm Tooth pitch: 0 - 60 mm Tooth height: 0 - 25 mm Clamping angle: 0 - 40°

Condition: new, Year of construction: 2026, Model: Electrical, Option with swingarm Tooth form: All common tooth forms Saw blade width: 25 - 350 mm (double Side teeth and variable pitch) Teeth:0-60 Z/Pm Bwsdoyz Supepfx Ad Asl Coolant:150-300 l/min Tooth pitch: 10 - 60 mm Tooth height: 6 - 30 mm Tooth angle: 0 - 40° Sharpening speed: 6 - 10 teeth/min Grinding wheel: 300x30mm, 8 - 13mm thick Grinding wheel motor: 2,8 kW E-Motor Water tank volume: 165 liter

Condition: new, Year of construction: 2026, Model: Mechanical with touch panel Tooth profiles: All common tooth profiles Bedpfoyz Srbox Ad Aowl Blade width: Band saws up to 230mm Blade thickness: 0.6 - 6.0 mm Tooth pitch: 0 - 60 mm Tooth height: 0 - 25 mm Clamping angle: 0 - 40°

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, Wet sharpening machine for Frame Saws Bedpfjyz Srnox Ad Aowl

Condition: new, Year of construction: 2026, Model: Electrical, Option with swingarm Tooth form: All common tooth forms Saw blade width: 25 - 350 mm (double Side teeth and variable pitch) Teeth:0-60T/min Coolant:150-300 I/min Tooth pitch: 10 - 60 mm Tooth height: 0 - 30 mm Tooth angle: 0 - 40° Sharpening speed: 0-60 teeth/min Grinding wheel: 300x30mm, 8 - 13mm thick Bjdpfxoyz Srue Ad Ajwl Grinding wheel motor: 3.0 kW E-Motor Water tank volume: 265 liter

Condition: refurbished (used), Year of construction: 2010, The machine is in the process of overhaul. Delivery time on request. Information: Hopper capacity: 380L Weight:1200KG Width:1380 mm Depth:1040 mm Height:1330 mm Frequency:50 Hz Rated power:19 kW Total rated current:40 A Fuse protection (recommended) 3 x 50 A gL. Speed working auger:180/360 rpm Speed feeder screw:19/38 rpm Speed mixing shaft:9.5/19 rpm Errors excepted and subject to prior sale. All information is non-binding. The correctness and accuracy of the information and prices contained are not guaranteed. A warranty and / or liability is excluded. Bedpfx Ash Rdz Hod Aswl Until full payment, the machine remains our property.

Condition: refurbished (used), K+G Wetter WW130 Bsdpfx Asp Auaujd Aowl The machine has been fully overhauled by us. The machine is available on site. Errors and prior sale reserved. All information is non-binding. The correctness and accuracy of the provided information and prices cannot be guaranteed. Warranty and/or liability are excluded. The machine remains our property until full payment is received.

Condition: used, Professional meat grinder Duker Rex is designed for fast and efficient grinding of fresh and slightly frozen products with high capacity and reliable performance. This model is equipped with an automatic feeding worm system that enables continuous and even product transfer to the grinding unit, ensuring stable operation and high productivity. The large 120 liter hopper allows processing of bigger product quantities without frequent refilling, while the production capacity of up to 2000 kg/h makes this machine an excellent solution for intensive professional use. It is suitable for processing meat, poultry, fish, vegetables and other food products. The model uses the Unger cutting system with a 130 mm plate diameter, ensuring precise and high-quality grinding with a uniform final product texture. Stainless steel construction provides long service life, high hygiene standards and easy maintenance. Robust industrial design, powerful 11 kW motor and stable construction guarantee safe and reliable operation in demanding working conditions. Technical specifications: Machine type: Meat grinder Manufacturer: Duker Rex Capacity: up to 2000 kg/h Hopper capacity: 120 L Power: 11 kW Voltage: 400 V / 3+N Frequency: 50 Hz Cutting system: Unger Plate diameter: 130 mm Loading height: 1300 mm Output height: 680 mm Dimensions: 800 x 1200 x 1370 mm Net weight: 674 kg Material: Stainless steel Operation: Stable, powerful and reliable Maintenance: Easy and simple Bodpfx Aoy Izlksd Aewl

Condition: used, Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25 30 0000 100 01, For sale is this Deckel S11 tool grinding machine. Comprising: Bwedpfx Adsyq Nris Aol - 1 Deckel S11 universal tool grinding machine, year of manufacture 1988, machine no. 1115, painted green RAL 6011 - 1 dividing head SK40 - 1 thread and clearance grinding attachment - 1 grinding wheel dressing device - 1 machine lamp - 1 dust extraction unit - 1 IPM video measuring system, consisting of color camera, zoom lens with 10–110x magnification, screen with digital readout of travel paths, backlight, incl. software - 1 optoelectronic measuring device, prepared for the video measuring system - 1 set of collets, 20 mm shank, 1–18 mm clamping diameter - 1 set of collets, 10 pcs, 6–25 mm - 1 collet sleeve - 1 tooth rest - 3 grinding wheel safety covers - 1 setting gauge The machine is in limited working condition: - Occasional spindle speed fluctuations - The precision of the tool holding device should be checked and possibly overhauled

Condition: refurbished (used), K+G Weather angle grinder 114 Motor power 12 kW, 28 a stainless steel with feed ring screw, 2 speeds weight:615 kg Machine size 70x100x128cm Bedpfx Adsnp Hqdj Aewl Of course it is possible to visit the machine by appointment. Errors and prior sale reserved. All information is non-binding. The correctness and accuracy of the information and prices are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Condition: good (used), Seydelmann GW 300 Frozen Meat Grinder Thanks to their robust construction and their extremely strong power of motor, Seydelmann Frozen Meat Grinders guarantee a perfect cutting image even when grinding whole frozen meat blocks down to -25 °C (-13 °F). A very high hourly output and a very uniform grain size is achieved with any material. Seydelmann Frozen Meat Grinders can be integrated ideally into production lines. The machine frame is made of stainless steel and completely closed so that all pipes, motors and other parts are integrated into the machine. All edges are rounded and all surfaces on the machine are polished very precisely and designed with a slope so that cleaning water will drain completely from all surfaces. Thanks to embedded covers and the closed bottom of the machine frame water cannot enter the machine and pollution is prevented. The first stage of the size reduction process takes place in the hopper with the worm of the Frozen Meat Grinder. With its extended profile and relief grinding windings, the worm cuts off approximately 8 cm (3.2 in) of the frozen meat block with every rotation, and carries the meat to the cutting set for grinding. The GW 300 is equipped with a two-speed drive. The first speed is for deep-frozen blocks of meat or when using hole plates with small holes and the second speed is suitable for reduction with hole plates with bigger holes. Manufacturer: Seydelmann Model: GW 300 Hole plate diameter: 300 mm Capacity: Up to 10.000 kg/h Power of motor: 78/105 kW Power of AC-6 motor: 140 kW Hopper capacity: 450 Liters Machine dimensions LxWxH: 2.700x1.500x2.400 mm Conveyor dimensions LxWxH: 2.500x900x2.100 mm Bwjdpfxjy Dquyo Ad Aol Total weight: 3.300 kg.

Condition: used, Year of construction: 2006, functionality: fully functional, center height in crank: 1,100 mm, workpiece weight (max.): 180,000 kg, grinding length: 11,000 mm, grinding wheel diameter: 1,066 mm, total length: 11,700 mm, quill travel distance: 11,700 mm, workpiece weight between centers: 180,000 g, distance between centers: 11,700 mm, POMINI CNC Roll Grinder Model HD-425-2-7L Siemens 840D, 12 Axes. Built in 2006. Two flatbed system grinding and workpiece ways are separate. Machine accuracy. Straightness 0.001-0.002 mm/m. Roundness 0.001-0.002 mm. Eccentricity 0.002 mm. Profile for crown height up to 0.1 mm ±0.002 mm/m. Surface finishing without chatter marks and no feed marks after finishing grinding stage. On an independent bed: Auto Caliper Diameter 870 - 2,250 mm. Eddy current crack and bruise detector probe. Ultrasound depth probe up to 180 mm. Bodpfx Adswdmy So Aewl High Pressure wheel cleaner. Wheel dynamic balancing electromagnetic automatically or manually. Wheel dressing device with diamond. 2 Hydrostatic Steadies. 2 Hydrodynamic Steadies. 4 Soft landing for roles. Wheel quick change device incl motor. Jib crane. Vibration Measurement, recording on: Headstock base Neckrests Foot stock Wheel head Wheel head back Carriage Lateral side. Working Capacity. Grinding length 11,000 mm Max diameter with 1,066 mm Grinding wheel 2,200 mm Min diameter with 1.066 mm Grinding wheel 800 mm Center distance 11,700 mm Max Roll weight 80 Tons Max Roll weight with Steadies 180 Tons Min distance between wheel center and roll axis 845 mm Max distance between wheel center and roll axis 1,635 mm Carriage Axis Z, Hydrostatic Feeds, Infinitely variable 0-6,000 mm/min Oil film thickness 0.020 mm Distance between carriage ways 1,500 mm Ways width 160 mm Total length of the carriage on ways 3,385 mm Wheelhead on Carriage Axis X, Wheel Probe Axis A, Inspector Axis A1, Wheelhead cross travel Ballscrew, Axis X 940 mm Resolution axis X 0.0001 mm Wheel Spindle length 1,695 mm Spindle bearing, hydrostatic, diameter 254 mm Resolution Infeed micrometer handwheel, Axes X 0.00001 mm / division Continuous wheel infeed, U axis on radius 0 - 0.35 mm/min Rapid wheel indeed, axes X 0-830 mm/min Wheel motor, AC 130 kW Wheel Speed 400-1,100-1,600 rpm Wheel Cutting Speed infinitely variable Surface speed wheel diameter 1,066 mm 45 m/sec Surface speed wheel diameter 670 mm 45 m/sec Wheel hole, diameter 508 mm Wheel thickness 76 - 152 mm Wheel diameter 670 - 1,066 mm Crowning, Axis U. Max crown on the diameter 10 mm Max concavity on the diameter 10 etc Head stock Workpiece rotating speed 5 - 50 rpm Headstock motor 200 kW Max transmissible torque 76.5 kNm Faceplate control system V Belts Max Center diameter, metric type 160 mm Stroke of Quill 150 mm Length of headstock 3,110 mm Tail stock Quill diameter 260 mm Stroke of quill 750 mm Maximum center diameter, metric type 160 mm Taper Metric 5% on the diameter Tailstock length 1,300 mm Stroke of tailstock 8,000 mm Caliper, Arm Axis C, Carriage Axis V, Rotation Axis B. Max measurable diameter 2,250 mm My measurable diameter 870 mm Machine Dimensions. Machine weight 130 tons Length 19.5 m. Width 5.5 m. Height 3.2 m. Foundation depth 3.8 m.

Condition: used, Year of construction: 1996, functionality: fully functional, total height: 2,120 mm, total length: 1,360 mm, total width: 1,965 mm, spindle speed (min.): 5,200 rpm, feed length X-axis: 400 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 1,850 kg, center height: 210 mm, grinding spindle motor power: 1,500 W, workpiece diameter (max.): 400 mm, input voltage: 380 V, We offer this used Schneeberger NORMA NC4 tool grinding machine, year of manufacture 1996. CNC-controlled X Y Z A axes. ISO50 dividing head. Bedpfx Aeyw Tz Aod Aowl Complete with coolant tank and pump. If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), HSS saw grinder SCHMIDT TEMPO model ECE45, 4 axis, diameter up to 630 mm Bjdpfjy H Egcsx Ad Aewl

Condition: good (used), total width: 3,500 mm, total length: 19,000 mm, total height: 2,100 mm, workpiece weight (max.): 6,000 kg, grinding diameter: 850 mm, grinding length: 6,000 mm, center height: 425 mm, Cylindrical grinder Schmaltz - RM 82/6000 MACH-ID 9492 Make: Schmaltz Type: RM 82/6000 Centre height: 425mm Grinding Ø: 850mm Bwjdpfx Adjy Dr Eae Ael Grinding length: 6000mm Grinding stone dimensions:1100 x 80 x 560mm Grinding stone speeds: 700Rpm Table inclasement: -5 to +5° Tailstock: 160 x 100Mk Length: 19000mm Width: 3500mm Height: 2100mm Weight: 31000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0000025, center height: 315,425 mm, workpiece weight (max.): 3,000 kg, grinding length: 3,000 mm, grinding wheel diameter: 750 mm, total width: 2,700 mm, total length: 11,000 mm, total height: 2,200 mm, grinding diameter: 630,850 mm, workpiece weight between centers: 3,000 g, distance between centers: 3,000 mm, grinding wheel width: 100 mm, feed length Z-axis: 3,300 mm, grinding spindle speed: 1,000 rpm, overall weight: 17,000 kg, rotational speed (min.): 2 rpm, rotational speed (max.): 250 rpm, warranty duration: 24 months, rapid traverse X-axis: 3 m/min, rapid traverse Z-axis: 6 m/min, input voltage: 400 V, workpiece spindle speed (max.): 250 rpm, Equipment: rotational speed infinitely variable, Cylindrical grinding machine BUC63/3000 CNC new in 100% condition with Sinumerik ONE control system, or INTRONIX TOS CNC. Bsdpfx Adou U Ewgs Aowl It is possible to expand with additional equipment for superfinishing SUPFINA, or for grooving equipment for rubber or plastic rollers.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, We are selling the EMS 10 U machine, year 1988, no. 187. It is in good condition – see photos! The technical specifications can be found in the operating manual; please refer to the documents at the link below! The machine was used in our facility for frame saw blades. Bwedpfjycfy Hjx Ad Ael The original operating manual is included as well. Please feel free to make us an offer! Pickup in 6858 Schwarzach.

Condition: excellent (used), Automatic straight knife grinder REFORM model AR25 with tilting magnet mm 2500x150, 5,5 kW grinding wheel motor Bodpoy Hxmvofx Ad Aewl

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, The UFS-155 is a universal cutter grinder, ideal for manually regrinding straight and helical cutting tools. It offers a reliable and precise solution for regrinding work in workshops and manufacturing facilities. Main features: • Simple and user-friendly operation • Backlash-free spiral grinding device • Infinitely variable helix adjustment from 0 - ∞, quickly and easily left or right • Grinding length up to 155 mm • Quick and easy assembly • Suitable for HSS and carbide tools Scope of delivery includes: • 3 SK40 reducing sleeves Bedpfxod Hhhpj Ad Aowl • 1 control unit • 3 index plates