Used Clamping Jaws Height Adjustable for sale (51,854)

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Todomck Ryjpfx Antjb Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: good (used), Year of construction: 2020, machine/vehicle number: 164390-0000-Z2724, Offer 24059 Technical data: Tsdpfx Anerwmkaotsb - Jaw design stepped jaws - Jaw width 125 mm - Jaw height 40 mm - Clamping width 1 0 - 216 mm - Clamping width 2 97 - 312 mm - Clamping force 40 kN - Total height 140 mm - Weight 33 kg - Min. Space requirement L 463 x W 126 x H 145 mm

Condition: as good as new (ex-display), Year of construction: 2023, Welding rotary table Protec KT 5000 HV Complete set including hand-held and dual-pedal remote control Digital display for speed Hydraulic height adjustment Dimensions: minimum tilted height: 800 mm maximum tilted height: 1900 mm minimum horizontal height: 1050 mm maximum horizontal height: 2000 mm diameter of the clamping disc: 1500 mm length: 2900 mm, width: 1400 mm weight: 3200 kg Tjdpfxeficr Uo Antjb speed: from 0.01 to approximately 0.7 RPM.

Condition: used, functionality: fully functional, 4 used adjustable wheel clamps for recovery crane, etc., fully functional. No shipping possible. Please do not send email enquiries! If you have any questions, you can reach us by phone. Viewing and collection only by prior telephone appointment. Subject to changes, prior sale, and errors. Tsdezwk Ttspfx Antob We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Condition: new, Year of construction: 2026, The WP600 self-centering three-jaw chuck is a precise and highly durable solution designed for use with welding positioners and welding rotators. Thanks to its advanced construction and wide clamping range, it enables fast and accurate clamping of cylindrical or hexagonal workpieces with considerable weight. It is ideal for professional production and workshop applications where stability and process repeatability are essential. Key Features of the WP600 Chuck High clamping force – up to 1,200 kg, ensuring secure and reliable clamping even for very large workpieces. Clamping range of 300–600 mm – ideal for large-diameter pipes and components. Load capacity of 1,000 kg – designed for heavy workpieces being welded or machined in rotation. Self-centering three-jaw mechanism – ensures precise axial positioning of the workpiece. Versatile applications – suitable for pipes, square and hexagonal profiles, as well as irregularly shaped workpieces. Construction and Technology The WP600 is equipped with three robust self-centering jaws made of tool steel with increased wear resistance. The jaws are synchronized by a precision mechanical system, ensuring stable and accurate clamping. The Ø360 mm central through-hole allows long pipes to pass through the chuck, significantly expanding its range of applications in welding and assembly processes. Precision and Operating Efficiency The WP600 chuck reduces workpiece setup time for welding or machining while ensuring high positioning accuracy. The repeatability and precision of clamping directly contribute to the quality of welds and machining operations. It is an ideal solution for facilities requiring efficient integration with welding rotators and the highest possible production quality. Applications The WP600 chuck is perfectly suited for use with welding rotators and welding positioners. It is designed for clamping large and heavy workpieces, including: Pipes Flanges Tanks Frames Specialized structural components Tsdozwmtijpfx Antjb It is particularly suitable for structural steel fabrication, the power industry, tank manufacturing, and companies performing circumferential welding and precision assembly. Technical Specifications Specification Value Model WP-600 Maximum clamping force 1,200 kg Maximum load capacity 1,000 kg Through-hole diameter Ø360 mm Clamping range Ø300–600 mm

Condition: good (used), Year of construction: 2020, Hydraulic 3-jaw chuck, manufacturer: SCHUNK, type: TFH 500-160, year of manufacture: approx. 2020, in good condition. Includes 2 chuck keys and 3 pairs of jaws. Diameter: 500 mm, height: 150 mm. Bore in the front area of the chuck: diameter 160 x 65 mm, depth. Short taper DIN A 8 in the flange, thread in the chuck for tensioning rod (approx. M 100 x 2). Weight approx. 180 kg without jaws. Tsdpszty Rgefx Antjb The chuck is in good condition. The chuck was previously installed in a MORI SEIKI SL 6 or SL 603.

Condition: used, Cast iron clamping cube 2 faces Length: 1000 mm Height: 600 mm Depth: 800 mm T-slots dimensions: 38 x 22 mm Todpfjzwxh Sex Anteb Weight: approx 600 kg

Condition: excellent (used), Soft clamping jaws Manufacturer: Schunk Type: SFA 400 (28320) Tjdpjivzb Rofx Antjb Length: 180 mm Width: 50 mm Height: 73 mm Groove width: 18 mm Web width: 30 mm

Condition: new, Year of construction: 2026, The WP500 self-centering three-jaw chuck is a professional clamping component designed for use with welding positioners and welding rotators in industrial environments. Thanks to its wide clamping range and robust construction, it provides fast, safe, and precise clamping of pipes and workpieces with various shapes. It is an ideal solution for facilities requiring high reliability in welding and machining processes. Key Features of the WP500 Chuck Wide clamping range – securely clamps workpieces with diameters from 200 to 500 mm. High clamping force – up to 800 kg, ensuring stability even when clamping heavy and irregular components. Maximum load capacity of 600 kg – designed for handling large components for rotational welding or machining. Self-centering three-jaw mechanism – ensures precise alignment of the workpiece with the rotational axis of the welding positioner. Versatile applications – suitable for clamping pipes, sleeves, square profiles, and hexagonal profiles. Construction and Technology The WP500 chuck has been designed for operation in demanding industrial environments. It features a reinforced mechanical system with three self-centering jaws that move synchronously toward and away from the center axis. The jaws are made of hardened steel, providing high wear resistance and ensuring long service life. The Ø235 mm through-hole allows workpieces such as pipes to pass through the chuck, expanding the technological capabilities of the positioner. Precision and Operating Efficiency The WP500 chuck mechanism enables rapid workpiece clamping while maintaining precise axial alignment. This significantly reduces setup time and improves the repeatability of production processes. Secure clamping directly contributes to the quality of the weld or machining operation by preventing workpiece movement and errors caused by inaccurate positioning. Applications The WP500 chuck is designed for use with welding positioners, welding rotators, and other welding turning devices used in both serial and custom production. It is particularly recommended for welding: Pipes Flanges Tanks Frames Non-standard components requiring precise axial clamping Tjdpezwmrxsfx Anteb It is ideally suited for heavy industry, structural steel fabrication, power generation, and tank manufacturing. Technical Specifications Specification Value Model WP-500 Maximum clamping force 800 kg Maximum load capacity 600 kg Through-hole diameter Ø235 mm Clamping range Ø200–500 mm

Year of construction: 2021, condition: excellent (used), Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment dimensions: height tilted min: 800mm height tilted max: 1900mm Tedpfxjm Ew Sts Anteb height horizontal min: 1050mm height horizontal max: 2000mm diameter of the clamping disc 1500mm length 2900mm, width 1400mm weight 3200 Kg speed from 0,01 to approx. 0,7 rpm.

Condition: new, Year of construction: 2025, 3 axis welding rotary table Protec KT 10 000 HV with height adjustment Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Tilting range 0 to 130 dimensions: Tsdpsmk T Rbsfx Antjb height tilted min: 1050mm height tilted max: 2200mm height horizontal min: 1360mm diameter of the clamping disk 2000mm length 3250mm, width 1700mm speed from 0,05 to approx. 0,6 rpm.

Condition: new, Year of construction: 2022, Welding rotary table Protec KT 5000 HV Complete set including hand-held and dual-pedal remote control Digital display for speed Hydraulic height adjustment Dimensions: minimum tilted height: 800 mm maximum tilted height: 1900 mm minimum horizontal height: 1050 mm maximum horizontal height: 2000 mm Tedpfxjig T Eaj Antsb diameter of the clamping disc: 1500 mm length: 2900 mm, width: 1400 mm weight: 3200 kg speed: from 0.01 to approximately 0.7 RPM.

Condition: new, Year of construction: 2024, Welding positioner Protec KT 10 000 HV Complete set including hand-held and dual-pedal remote control Tedpfx Ajk S D N Esntob Digital display for speed Hydraulic height adjustment Tilting range from 0 to 130° Dimensions: minimum height when tilted: 1080mm maximum height when tilted: 2200mm minimum height in horizontal position: 1400mm diameter of the clamping plate: 2000mm length: 3250mm, width: 1780mm speed from 0.05 to approximately 0.6 RPM.

Condition: used, functionality: fully functional, Year of construction: 2006, load capacity: 900 kg, Cardboard clamp Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Todpfx Aszigt Hsnteb Technical condition: good Description: ISO 2A (41 cm), Year 2006, Capacity 900 kg, Sideshift, Opening range 480-2200 mm, Clamp length 1100 mm, Clamp height 1000 mm, Width 1600 mm, ID OS1977

Condition: used, Year of construction: 2014, total length: 3,400 mm, total width: 1,200 mm, total height: 2,880 mm, Colour: White Tedpfszgbugsx Antjb Empty weight: 1.500 kg - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 183610114 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. clamping width [mm]: 3000 - Max. clamping height [mm]: 1710 - Max. clamping depth [mm]: 100 - Number of cylinders [pcs]: 4 - Cylinder stroke [mm]: 1200 - Options: Horizontal/vertical cylinders separately controlled, Remote control - Voltage [V]: 400 - Current consumption [A]: 3.5 - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 3400mm x 1200mm x 2880mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Complete set including hand and double-foot remote control Digital speed display Hydraulic height adjustment Dimensions: Todpfx Asl Dq U Uentob Tilt height min: 800mm Tilt height max: 1900mm Horizontal height min: 1050mm Horizontal height max: 2000mm Clamping disc diameter 1500mm Length 2900mm, width 1400mm Weight 3200 kg Speed from 0.01 to approx. 0.9 rpm. CE certified

Condition: used, Year of construction: 1980, load capacity: 1,000 kg, Cardboard clamp ISO class: ISO class 2 = 1,000 - 2,500 kg Tjdpfx Anet S Ntusteb Technical condition: good Description: ISO 2A (41 cm) Capacity 1000 kg Year 1980 Opening range 500-1680 mm Clamp length 1300 mm Clamp height 1200 mm Width 900 mm ID OS913

Condition: new, functionality: fully functional, working height: 600 mm, Mitutoyo 192-614-10 Digimatic is a high-precision digital height gauge with a rigid double-column design for accurate and stable measurements. It offers a 0–600 mm measuring range, switchable 0.005/0.01 mm resolution and ±0.05 mm accuracy. Equipped with a clear LCD display, fine/coarse adjustment and Digimatic data output. New, in original package. Two are available. Tsdpfx Anszulbaetob

Condition: excellent (used), overall weight: 60 kg, Three-jaw chuck Manufacturer: Forkhardt Model: F 315 Diameter: 315 mm Height: 120 mm Tedszw U Stepfx Antsb Jaw height: 175 mm Weight: 60 kg

Condition: like new (used), Year of construction: 2018, Rated Loading: 3000 Kg Rotating speed: 0,05 ~ 0,6 U/min Tilting speed: 0,5 rpm Worktable size: 1200mm Tilting angle: 0~120° Rotating Power: 1,5 Kw Hydraulik Motor Power: 3 KW Speed adjusting way: VFD Todpfx Ansdt Rhgotob Worktable height: 960mm ~ 1910mm Hydraulik system pressure 10 MPa

Condition: used, Technical details: table length: - mm table width: - mm table load: - t height: 1250 mm width: 1000 mm depth: 800 mm weight of the machine ca.: 1200 kg Tedpfxezuzr Ie Anteb 2 units available (price per unit) According to DIN 650: 6 × T-slots When making your inquiry, please specify the number of clamping angles required. *

Condition: new, Year of construction: 2026, functionality: fully functional, Pneumatic Hold-Down for a Sliding Table Saw – Essential Equipment for Maximum Material Stability A pneumatic hold-down for a sliding table saw is an essential piece of equipment for facilities that require maximum stabilization of the material being cut. The two-section model with a length of 3,200 mm ensures secure and even pressure against the worktable, eliminating problems commonly associated with working without a hold-down – chipping, material waste, and inaccurate cuts. Key Advantages Pneumatic hold-down with two independent sections – each equipped with two cylinders, allowing flexible control of the pressure applied to different areas of the table. Extended 3,200 mm beam – provides full coverage of a typical sliding table saw table length and is ideal for processing large-format panels. Optimal working force at low pressure – effective operation from just 2.0 bar, resulting in lower energy consumption and simpler installation. Improved operator safety – securing the material reduces the risk of panel movement and uncontrolled shifting during cutting. Reduced material waste – stable positioning eliminates cutting errors and reduces the amount of waste. Higher edge quality – with no material vibration or movement, cuts are clean and free from burrs and fraying. Tedpjvxtcqsfx Antjb Construction and Technology The hold-down beam is made of a durable steel profile, ensuring long service life and resistance to deformation. The pneumatic cylinders are arranged in two independent sections, providing even pressure along the entire length of the material being cut. The separation of the pressure zones makes it possible to adjust the clamping force to different panel sizes and thicknesses. The entire system is designed for quick installation on most sliding table saw worktables, making it easy to integrate into existing production lines without modifying the machine's structure. Precision and Work Efficiency Using a pneumatic hold-down on a sliding table saw directly improves cutting efficiency and dimensional repeatability. Even when cutting thin or laminated panels with finished surfaces, the operator can be confident that the material will remain securely in position. This has a direct impact on the quality and appearance of the finished component. Applications The two-section hold-down for sliding table saws is suitable for: furniture manufacturing facilities specializing in cutting laminated panels and MDF, production of structural components from wood and wood-based materials, precision applications where excellent cutting quality and defect-free edges are required, workstation automation, as a component supporting serial cutting processes. Standard Equipment 3,200 mm hold-down beam 4 pneumatic cylinders (2 per section) Set of connectors for connection to the pneumatic system Mounting brackets for installation on the worktable Optional Equipment Quick-release air connection module Additional safety valve Foot control system (pneumatic pedal) Integration with the saw's control panel Technical Specifications Parameter Specification Hold-down length 3,200 mm Maximum material height 100 mm Number of cylinders 4 Operating pressure 2.0 bar

Condition: good (used), Clamping jaws, clamping clamps, clamping devices, clamping irons, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps -Manufacturer: Lenzkes, clamping jaws, machine table clamps -Type: 100-20L -Groove width: 27 mm -Number: 2x tensioners available -Price: per piece -Dimensions: 270/80/H150 mm Tedpexup I Rsfx Antob -Weight: 4.4 kg/piece

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Handover: in its current condition as inspected -Condition: see pictures -Clamping angle: for workpiece clamping -Table surface: 730x610 mm, height 1595 mm -Wall thickness: 35/42 mm -Oblong hole: 25x150/25x105 mm Tsdpfx Aozav Hrsnteb -Dimensions: see photos -Number: 4x mounting brackets available -Price: per piece -Dimensions: 610/730/H1595 mm/piece -Weight: 658 kg/piece

Condition: good (used), diameter 250 mm amount 1 STK weight 37 kg Pratt Burnerd 6-jaw self-centring chuck (6 Jaw Griptru Scroll Chuck), Ø 250 mm – catalogue number 1260-02505. Tedpfjzupmtox Antob -->> Special feature of the 6-jaw chuck: Technical data – Specifications Type: 6-jaw self-centring chuck --> Model: l1260-02505 --> Outer diameter: 250 mm --> Number of jaws: 6 --> Through bore: approx. 75.9 mm --> Centring recess: 200 mm --> Mounting: 3 × M12 on 224 mm bolt circle --> Design: Rear mounting / Plain Back --> Clamping system: Scroll chuck (self-centring) --> About the model number