Used Comaca Var 250/6 for sale (61,723)

Condition: used, Year of construction: 2002, CNC machining center Deckel Maho DMF 250 linear, year of manufacture 2002, and DMC 63 H, year of manufacture 2002 Pgjdpfjyphl Eox Ai Tsu

Condition: new, Material number 16 Cr Mn 5 Width of centering groove: 32 mm Pgsdpob Rmx Hofx Ai Tou Length: 90 mm Width: 60 mm Height: 54 mm

Condition: ready for operation (used), Heidenhain ROD 250 18000 . 21311601 Serial number: 3654376C / L3, fully refurbished with 6 months warranty, 100% functional, delivery as per photos. Pgjdpoy Nqn Defx Ai Teu

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, power: 132 kW (179.47 HP), Drum chipper, Rudnik & Enners. Type TH 250-300/650/5 Drive motor 132 kW Infeed height 300 mm Lower infeed rollers: 3 pcs. Upper infeed rollers: 2 pcs. Including vibrating screen, 8 m long, with drive, overhauled; 1 screen, 7.5 m long, and 1 screen, 10 m long, not overhauled. Pgedpfxey R Nbls Ai Tsu Metal detector. The machine has been out of service since 2014 and has been completely overhauled. Ready for immediate use. Control system available.

Year of construction: 1974, condition: ready for operation (used), Offered is a single-column eccentric press, manufacturer Schuler. Press force: 63t, throat depth: 250mm, max. stroke: 8mm-100mm, max. stroke rate: 160strokes/min, bed area X/Y: 710mm/500mm, slide area X/Y: 450mm/280mm, slide adjustment: 63mm, max. distance between bed and slide: 415mm, including a safety screen at the working area. Machine weight: approx. 3900kg. Inspection possible by arrangement. Pgodpfxjzrzp Ij Ai Tsu

Condition: new, Year of construction: 2026, Müthing side mulcher MU-L/S 250 Vario Rear and side mulcher Pgedpj Afvr Ujfx Ai Teu for tractors from 75 to 130 HP Year of manufacture: 2026 Standard equipment • Made of fine-grained steel QSt/E for rear mounting with a wide three-point linkage, category 2 • Hydraulic side adjustment via swivel arm, adjustment range 171 cm • Total working width up to 421 cm • Working angle from 90° upwards to 60° downwards • Gearbox with freewheel for 540 rpm • V-belt guard with inspection opening • Patented automatic safety device for starting, with mechanically acting linkage • Transport locking in 90° position with shut-off valve • High-strength M-hammer flails DURAX, forged from special steel • Smooth-running rotor with specially shaped, spiral-arranged tool holders • Screw-on short shredding bar system: "Shark Fin" – Müthing patent • Large support roller for adjusting the working height of the mulcher • Robust Starinth® support roller bearing • Adjustable Vario cutting bar for adjusting the degree of shredding • Hardox wear plates with segmented effect, screwable • High-strength pivoting protective flaps made of spring steel • 2 support legs • Required hydraulic connections: 2 x DW, including 1 x DW with floating position • PTO shaft with hardened inner tube and bearing lubrication – heavy-duty design • Operating manual Price applies to the current condition. Subject to prior sale, changes and errors. Illustrations may show optional accessories not included. No liability for errors in the product description and technical data. You can find more interesting offers on our website at

Condition: good (used), Year of construction: 2008, Working width: 250 cm Roller: Cage roller Ø 440 mm Working depth: Up to approximately 26–28 cm, depending on the model and roller adjustment. (10 rotors with 2 tines each). More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Pgjdjz Rgicopfx Ai Tju Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: DN-HB160-250KG, ABUS HB overhead crane system with dimensions of approximately 19 x 4 m (4 m span) Extending the runway rails is possible! Load capacity / lifting capacity: 250 kg - 0.25 tons - increasing the load capacity up to 1000 kg is possible! Technical data of the system: Crane system with ABUS HB160 rails The system is delivered complete: HB rails, rail connectors, carriages, travel drive in the span, end plates, supports/hangers, etc. Including a 250 kg ABUS chain hoist - lifting height approximately 4 m The crane is disassembled and immediately available. Used condition, see pictures. Pjdpfxozv Ea Se Ai Tjgu The item is located in 75053 Gondelsheim. Shipping via freight forwarder or collection by appointment only. Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity: 125 kg - 1600 kg. Please request a non-binding quote for your crane system, specifying the load capacity and dimensions.

Condition: good (used), Year of construction: 2020, operating hours: 2,640 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, Equipment: air conditioning, hydraulics, soot filter, KÄRCHER MC-250 Vacuum Sweeper Technical Data: Drive type: Diesel Drive: Two-wheel drive Engine manufacturer: VM Engine power (kW): 75 Emission standard: Euro 6e Travel speed (km/h): 60 Working width with 2 side brushes (mm): 2,625 Maximum working width with 3 side brushes (mm): 2,710 Hopper capacity (l): 2,500 Fresh water tank (l): 200 Optional fresh water tank (l): 390 Permitted total weight (kg): 6,000 Dimensions (L × W × H) (mm): 4,491 x 1,300 x 1,999 Particle filter Comfort seat Heating and air conditioning Heating Hopper: 2,500 l Radio system Rotating warning beacon Water tank: 120, 400 l Year-round use This KÄRCHER MC250 was built in 2020, has only 2,640 total operating hours and 1,820 sweeping hours according to the counter, and is in good overall condition with typical signs of use and wear, immediately ready for operation. Comparable new price: €200,000! - Gross price: €59,900 // Net price: €50,336 - Viewing / test drive possible by arrangement - Nationwide shipping can be organized. Shipping costs depend on distance! - Attractive leasing/financing offers available through our leasing partner—contact us for details! Psdpfx Aijwzwaks Tsgu

Year of construction: 1988, condition: excellent (used), machine/vehicle number: TRHE, 1 Demag wall jib crane 250 KG payload / lifting capacity 5 units available, lengths 1x5 - 1x5.8 - 1x6 - 2x7m Price from 1950 for a 5m crane, 250Kg payload with steel chain hoist payload 250 + 500Kg Weight including wall bracket approx. 350 Kg Complete with wall brackets, boom, chain hoist, cable drag, chassis and small parts Swivel range 270° Item location is 75053 Gondelsheim System is completely dismantled and immediately available See pictures Used condition Shipping by freight forwarder or collection Please enquire about shipping costs according to postcode Pgedpfsmqf I Esx Ai Teu

Year of construction: 2021, operating hours: 2,235 h, condition: used, used screwcompressor immediately available: variable RENNER RSF 250 D - (6 to 8 bar) frequency-controlled, direct-driven screw compressor with RENNERtronic control with REflex control - adjustable pressure range 6 to 8 bar Hours: 2235 h Pressure: 6 to 8 bar Nominal output: 250 kW Quantity delivered: at 6 bar: 12.13 to 49.30 m³ / min at 7 bar: 11.80 to 44.50 m³ / min Sound level: 84 dB (A) Compressed air outlet: DN 100 Dimensions length x width x height: 3663 x 2100 x 2338 mm Weight: 5530 kg Podpfx Aijh Rvpko Tjgu Year: 2021 Visit our shop. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: used, Year of construction: 1969, press capacity 250 t spindle diameter 160 mm ram stroke range 180 mm stroke speed 71 Hub/min column daylight 450 mm table surface area 560x450 mm ram surface 450x400 mm total power requirement 12 kW weight of the machine ca. 9 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Psdpfx Ajyt R Epji Togu If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Podpfewlkcasx Ai Tsgu Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net

Condition: used, mileage: 586,000 km, power: 184 kW (250.17 HP), first registration: 10/2016, fuel type: diesel, overall weight: 15,990 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro6, loading space length: 7,318 mm, loading space width: 2,497 mm, loading space height: 2,647 mm, Year of construction: 2016, Equipment: ABS, air conditioning, Manufacturer Iveco Model EuroCargo 160-250 Side opening 7,3 m / Euro 6 Year 2016 Condition Good Serial Number ZCFA71MJ202640989 Ref. nr. 248154 Reg. date: 28-10-2016 Hk: 250 Km: 586000 Gearbox: Manual Eurotype: 6 Diesel tank: 1 Pgjdpfx Aezvuc Noi Tju Tank liter: 150 L Air conditioning: ? Cabin type: Euro Cargo Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 285/70R17,5 - 285/70R17,5 Cover% left 60% - 60% Front suspension: Parable Suspension rear: Air Wheelbase: 5175 mm Total weight: 15990 Kg Net weight: 7820 Kg Load capacity 8170 Kg Inside length: 7318 mm Internal width: 2497 mm Interior height: 2647 mm Lift Brand: Zepro Lift capacity: 2500 Kg

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm Podpjzrpn Sofx Ai Tegu ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws Pedpfxouxfu Ne Ai Tsgu - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: Prism block for marking plate, clamping plate, straightening bench ... 6 pieces Psdou T Tp Ujpfx Ai Tsgu -Prism width: 100 mm -Dimensions: 6x 250/140/H63 mm -Dimensions: see photo technical drawing -Delivery/Price: complete -Transport dimensions: 250/280/H190 mm -Total weight: 75.1 kg

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Delivery time: by arrangement Podpfxswz R Iue Ai Tegu Freight basis: ex-works

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.239, 🛠️ Heavy-Duty Portal Milling Machine WALDRICH SIEGEN Type V/H-FR A heavy-duty and powerful portal milling machine from WALDRICH SIEGEN is offered for sale, ideally suited for machining large and heavy workpieces. The machine comes from a renowned German manufacturer and impresses with its extremely robust construction, high base precision, and excellent suitability for modernization. 💡 Special Feature The machine is sold as-is (not overhauled) and therefore offers an ideal opportunity for customer-specific modernization (e.g. new CNC control, electrics, measuring systems) – perfect for buyers who want to implement their own solution. ⚙️ Highlights ✅ Portal design with fixed cross rail for maximum rigidity ✅ High performance: 58 kW main drive ✅ Speed range up to 1,800 rpm ✅ Two machine tables with automatic coupling ✅ Extremely high load capacity up to 100 tons ✅ Ideal for retrofit / CNC upgrade ✅ Perfect for heavy-duty machining 📊 Technical Data 🔹 Clamping surface per table: 2,500 x 4,000 mm 🔹 Clamping surface (coupled): 2,500 x 8,700 mm 🔹 Max. workpiece weight: ➡️ per table: 50 t ➡️ coupled: 100 t 🔹 X-axis travel: up to 9,503 mm 🔹 Y-axis travel: 5,515 mm 🔹 Z-axis travel (ram): 1,000 mm 🔹 Spindle power: 58 kW 🧰 Equipment ✔️ Tool changer (chain magazine, 60 positions) ✔️ Angle heads (RAA), including universal angle head ✔️ Spindle extension ✔️ Chip conveyor ✔️ Automatic accessory changing system 📍 Location Germany 👁️ Inspection Inspection possible at any time by appointment Pgodpfxedkmihe Ai Tsu 📦 Availability Available at short notice 📩 Contact Contact us now for further information, pictures, or a customized offer!

Condition: excellent (used), mileage: 899,950 km, first registration: 12/2014, fuel type: diesel, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,400 mm, Year of construction: 2014, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, spoiler, = Additional options and accessories = - Aluminum fuel tank - iso tray - Low noise - Remote central locking - Roof Spoiler - Spoilers - Sun visor = Remarks = XLRAEL2700L438953 Cool unit brand: Carrier = More information = Empty weight: 7.920 kg Carrying capacity: 8.080 kg GVW: 16.000 kg Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Pjdpfxoymrt Io Ai Tsgu Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), Year of construction: 1984, - 6 rows of bottle cages - WITHOUT OZONE GENERATOR Pgjdpfx Asralr Hoi Teu - Machine in working condition - Machine available immediately - Video available on request

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 505591, SCHMALZ Vacuum Lifter Lifting capacity: 250 kg Psdpfx Aiszhigmo Tsgu Maximum panel dimensions: 560 x 250 cm

Condition: like new (used), Grundfos NB65-250/254 Centrifugal volute pump Unused in box, Single stage non self priming centrifugal volute end suction pump, 5.5Kw, 1470 RMP, flow rate 69.5 m3h, 3Ph Pgsdps Ad Rg Rjfx Ai Tou

Condition: new, Year of construction: 2023, New mulching equipment, year of manufacture 2023 Standard equipment: - Made of high-strength steel for rear mounting with a wide three-point linkage, Cat. 2 - Hydraulic side shift via pivoting arm, shift range 175 cm - Total working width up to 425 cm - Working range from 90° upwards to 60° downwards - Gearbox with freewheel for 540 rpm - V-belt guard with inspection opening - Patented automatic overload protection via mechanically acting linkage - Transport locking in 90° position with shut-off valve - High-strength M – hammer flails DURAX, forged from special steel - Smooth-running rotor with specially shaped, spirally arranged tool holders - Screwable short mulching bar, "shark fin" system - Large support roller for working height adjustment - Robust support roller bearing - Lateral sliding runners with dividing effect - High-strength, spring steel pendulum guard flaps - Support strut - Required hydraulic connections: 2 x DW, one of which is a DW with floating position - PTO shaft with hardened inner tube and bushing base lubrication – heavy-duty design Optional equipment: - Heavy-duty PTO shaft, wide-angle on both sides, inner tube coated with Rilsan - Adjustable Vario cutting bar for adjusting the degree of shredding - Wear plate in the housing (installed) - Hardox wear runners with dividing effect, screwable Technical data: - Working width: 250 cm - Overall width: 345 cm - Max. tractor power: 130 hp - Weight: 950 kg - M – hammers: 22 pieces - Min. tractor weight: 3,500 kg Pjdpfx Ao Af N Hrei Togu Working and shifting range: - to the left: 70 cm - to the right: 105 cm - transport length to the rear: 200 cm - total range including equipment width: 425 cm - overall width: 345 cm - upwards: 90° - downwards: 60° Harald Bruhns GmbH Postliner Straße 18 H 19357 Karstädt Tel: Mobile: Errors and prior sale excepted.

Condition: excellent (used), Coating and packaging line with thermo-shrinkable film, consisting of: a) Double conveyor belt (mm 3000 x mm 1100) for application of corner protections. - Adjustable feeding speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt Psdpjgp Diaofx Ai Tsgu - Total length of the machine (with motorised belt) mm 7600 approx. - Reel holder (6 upper reels max width mm 2450 + 6 lower reels max width mm 1450) - Slitter and transversal welding machine (mm 2500) - Max useful height mm 700 - Installed power KW 12 - With automatic device to pack light pieces (from 1 to 5 Kg) by welding bar c) Shrinking tunnel total length about 4700 mm (of which about 3700 mm are of the tunnel) with hot air circulation (heating by electric resistances and fan), total installed power KW ? - conveyor with metal rods (width mm 1500 approx.) - Max useful height mm 700 - Adjustable feed speed from 4 to 20 m/min d) Outlet roller conveyor "ELME" (idle rollers) for cooling (mm 3000 x 1500 ca.)