Used Cormak Fan-Blower for sale (4,699)

Condition: used, functionality: unexamined, machine/vehicle number: RHE E 180 MF, input voltage: 380 V, suction capacity: 1.692 m³/h, HVB Hansa Blower / Fan Manufacturer: Hansa Ventilatorenbau Model: RHE E 180 MF Lsdpfxexixqws Acfsaf Capacity m3/h: 1,692 Power kW: 1.5 Voltage: 380 Volt.

Condition: used, Axial high-performance fan, Axial fan AEG Wall-mounted fan for extraction or ventilation Type AG 80 NY6 No. 4268465 Airflow approx. 11,000 m³/h 6-blade fan Ø 600 mm Internal mounting frame Ø 645 mm External mounting frame Ø 900 mm Installation depth 190 mm Motor power 0.55 kW Power supply 400 Volt, 50 Hz - 6-bladed profiled impeller with bionic blade geometry Lsdsxciw Ijpfx Acfjaf - Fan blades made of aluminium - Fan housing made of metal with wall mounting ring (galvanized sheet metal) - Metal stand with protective guard, custom-built - Mobile Dimensions L x W / H: 1200 x 870 x 1520 mm Weight approx. 90 kg The high-performance fan is in very good condition.

Condition: used, Radial fan with sheet metal housing, type H15 /400-M Lajdoxcitvspfx Acfsf Serial no. 27265 Year of manufacture 1977 Inlet pipe Ø 200 mm Outlet pipe Ø 110 mm Impeller diameter approx. Ø 700 mm Impeller width approx. 90 mm Airflow 0.25 m3/s = 900 m3/h Total pressure difference 4000 N/m2 = Pg: 400 kg/m2 Specific gas weight at 20°C 1.2 kg/m3 Temperature range max. 70°C Motor speed 2850 rpm Motor power 2.2 kW Mains connection 400 V, 50 Hz - Sheet metal housing - sturdy metal base Required space (L x W x H) 740 x 520 x 1540 mm Weight approx. 80 kg in good condition

Condition: used, Radial fan, KASTRUP Manufacturer's No. 27688/1, Year of manufacture approx. 1985 Airflow rate: approx. 4000 m3/h Intake pipe: Ø 250 mm Laodpfsdz Sqwox Acfjf Exhaust outlet: 400 x 120 mm Motor speed: 1440 rpm Motor power: 5.5 kW Power connection: 380 volts, 50 Hz - Metal housing Space requirement L x W x H: 1100 x 900 x 1220 mm Weight: approx. 150 kg Good condition

Condition: used, Radial Fan REITZ Type: MAE Serial No.: 601475 Year of manufacture: 2017 Airflow: 4,260 m³/h = 71 m³/min. Pressure p: 1.2 kg/m³ Air inlet: Ø 250 mm (connection diameter in the base plate) Air outlet: 245 x 195 mm Motor speed: 2,915 rpm Motor power: 7.5 kW Power supply: 400 Volt, 50 Hz Laedpfer H Sqyox Acfof - Impeller with 9 blades - Directly flange-mounted drive motor - Flange dimensions for air outlet: 310 x 260 mm - Robust metal housing made of 5 and 6 mm steel Space requirement (L x W x H): 1,390 x 1,030 x 600 mm Radial fan weight: 200 kg In excellent condition, only test run.

Condition: ready for operation (used), Year of construction: 1999, Schuko K350 Ledpfx Aeyx Uxfjcfoaf 10,000 m³/h 11 kW

Condition: new, Year of construction: 2026, The most powerful centrifugal fan, the FAN5.5, achieves a capacity of up to 7419 m3/h. The design of the new technology line has enabled us to develop the LineWind metal turbine system. This is the most important feature of the radial fans, enabling them to extract all sorts of pollutants with increased vacuum power, thanks to a special blade system that has been profiled at an appropriate angle. The Radial Ventilator can transport air chips sawdust dust and other substances such as smoke or harmless gases. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. Lsdpfjvugh Esx Acfsaf APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of shavings, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities Technical parameters: MAX. AIR CAPACITY max. 7419 m3/h inlet diameter 300 mm discharge diameter 250 mm PRESSURE 2014 - 1320 Pa DIMENSIONS 750x750x830 mm MOTOR POWER / VOLTAGE 5.5kW WEIGHT 110kg

Condition: new, Year of construction: 2026, CORMAK FAN 11 High-Pressure Material Handling Fan – Premium Industrial Blower for Dust and Sawdust Extraction The CORMAK FAN 11 is a premium industrial high-pressure material handling fan designed for demanding dust extraction and pneumatic conveying applications. Delivering an airflow of up to 15,445 m³/h and powered by an 11 kW three-phase motor, it efficiently removes sawdust, wood chips, dust, and other dry particles generated during the processing of wood, metal, plastics, and composite materials. Its robust construction and high static pressure make it an ideal solution for large-scale industrial dust collection systems. Key Advantages High airflow capacity up to 15,445 m³/h for efficient extraction from multiple machines Powerful 11 kW motor for reliable continuous industrial operation Heavy-duty steel housing resistant to mechanical damage and corrosion Versatile application for sawdust, wood chips, dust, and other dry bulk materials Energy-efficient and low-noise operation optimized for long production cycles Flexible installation options for integration into customized extraction systems Construction and Technology The CORMAK FAN 11 utilizes a high-efficiency centrifugal impeller engineered to generate substantial airflow while maintaining high static pressure. The dynamically balanced impeller provides smooth operation with minimal vibration, while the welded heavy-gauge steel housing ensures excellent durability in demanding industrial environments. Designed for continuous-duty operation, the fan offers long service life with minimal maintenance requirements. Performance and Efficiency A precision-balanced impeller, industrial-grade electric motor, and optimized cooling system enable the FAN 11 to maintain outstanding performance during prolonged operation without overheating. Its high airflow and strong suction pressure make it ideal for extracting sawdust, wood chips, and fine dust from large woodworking machines, centralized collection systems, silos, and automated production lines. Applications The CORMAK FAN 11 is ideal for: Woodworking shops and furniture manufacturing plants Metalworking, plastics, and chemical processing industries Agricultural storage facilities and grain drying installations Automated production lines with centralized dust extraction Pneumatic conveying systems for dry industrial materials Standard Equipment Complete centrifugal fan assembly with 11 kW motor Heavy-duty steel housing with inlet and outlet flanges Industrial centrifugal impeller designed for continuous operation Optional Equipment Inlet and outlet diameter reducers Installation and mounting kits Cyclone separators and filtration systems Technical Specifications Parameter Value Ledpfx Acovugfwjfeaf Maximum Airflow 15,445 m³/h Inlet Diameter 350 mm Outlet Diameter 350 mm Static Pressure 3187–2019 Pa Motor Power 11 kW Power Supply 400 V Dimensions (L × W × H) 920 × 1050 × 1060 mm Weight 170 kg

Condition: new, Year of construction: 2026, FAN 7.5 Material Handling Fan – High-Capacity Industrial Dust and Chip Extraction by CORMAK The CORMAK FAN 7.5 is a high-performance industrial material handling fan designed for efficient extraction and pneumatic transport of wood chips, sawdust, dust, and other dry bulk materials. Equipped with a powerful 7.5 kW motor and delivering an airflow of up to 10,562 m³/h, it is an ideal solution for large woodworking shops, furniture manufacturers, agricultural facilities, and industrial production plants requiring reliable dust extraction. Key Advantages Airflow up to 10,562 m³/h – suitable for servicing multiple woodworking machines simultaneously High-pressure centrifugal impeller – generates suction pressure up to 2554 Pa Powerful 7.5 kW motor – designed for continuous industrial operation Versatile application – transports sawdust, wood chips, dust, and other dry particulate materials Heavy-duty steel construction – built for demanding industrial environments Construction and Technology Lsdpjvugrdsfx Acfsaf The FAN 7.5 centrifugal fan features a robust steel housing designed for long-term industrial use. The dynamically balanced steel impeller ensures smooth operation with minimal vibration, even under continuous load. Its stationary design allows seamless integration into custom dust extraction and pneumatic conveying systems, making it suitable for a wide variety of industrial installations. Performance and Efficiency The CORMAK FAN 7.5 maintains strong and consistent airflow, ensuring efficient removal of sawdust, chips, and airborne dust without clogging extraction ducts. Its high static pressure enables reliable transport of heavier wood waste particles, improving workplace cleanliness, protecting machinery, and enhancing overall production efficiency. Applications The FAN 7.5 is suitable for: Woodworking shops and furniture manufacturing plants CNC machining centers, panel saws, spindle moulders, and planers Agricultural facilities handling grain, feed, and biomass dust Metalworking and industrial production plants requiring dry material extraction Centralized dust collection and pneumatic conveying systems Standard Equipment 7.5 kW / 400 V three-phase electric motor Heavy-duty steel centrifugal impeller 340 mm inlet connection 350 mm outlet connection Industrial steel housing for stationary installation Optional Equipment Flexible extraction hoses and quick-connect fittings Cyclone separators Final-stage filtration systems Automatic machine start/stop control modules Technical Specifications Parameter Value Maximum Airflow 10,562 m³/h Inlet Diameter 340 mm Outlet Diameter 350 mm Static Pressure 2554–1673 Pa Motor Power 7.5 kW Power Supply 400 V Dimensions (L × W × H) 810 × 900 × 980 mm Weight 125 kg

Condition: new, Year of construction: 2026, CORMAK ZX 40BPC is a solid metal drilling and milling machine. Possibility of head rotation +/- 90 degrees of spindle, possibility of head rotation +/- 90 degrees, automatic spindle feed, right and left rotation, large table, liquid cooling, automatic table feed in the x axis, powerful engine, ability to drill up to 40 mm. Rotational speed up to 2500 rpm Machine characteristics HEAVY STABLE CAST IRON AUTOMATIC SPINDLE FEED ADJUSTABLE HEAD HEIGHT MASSIVE CROSS TABLE WITH PRECISELY GRINDED SURFACE DOVtail-shaped guides QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATIONS ROTATING HEAD +/- 90° Lsdpfsvxhfmox Acfjaf Technical data Max. drilling size (steel/cast iron) 32/40mm Face milling width 80mm End milling width 22mm Spindle extension 125mm Spindle taper MT4 Spindle speed (1400 rpm motor) 50～2500min-1 Maximum distance of the spindle tip from the table 735mm Maximum distance of the spindle tip from the base 1245mm Distance of the spindle from the column surface 272 mm Dimensions of the work table 730x210mm Base dimensions 690x520mm Engine 1.3/1.8kW Cooling engine 40W Dimensions 1200x1000x1910mm Weight 440 kg

Condition: new, Year of construction: 2026, The ZX 7045E 230V milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Ledpswnb T Isfx Acfsaf Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 230V Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Condition: new, Year of construction: 2026, CORMAK PD0700 Tilting Rocking Circular Saw The CORMAK PD0700 is a professional tilting rocking circular saw designed for efficient and safe cutting of firewood and various wooden materials. Equipped with a powerful 400 V motor and a large Ø700 mm carbide-tipped saw blade, the machine delivers high cutting accuracy, repeatability, and reliable performance. Thanks to its compact design and mobile chassis, the PD0700 is ideal for both workshop applications and private farm use. Key Features Professional Ø700 mm carbide-tipped blade with 64 teeth – enables fast and precise cutting of logs with diameters up to 280 mm. Heavy-duty steel construction – ensures durability, stability, and safe operation even under intensive working conditions. Large transport wheels and transport lock – allow easy movement of the machine and provide stability during operation. Electronic motor brake – significantly reduces blade stopping time, improving operator safety. Phase converter/switch – simplifies machine start-up in three-phase installations without requiring modifications to the power supply system. Fully assembled and ready for operation upon delivery – no time-consuming installation required. Construction and Technology The PD0700 rocking saw is built on a rigid steel frame designed to withstand deformation and dynamic loads during operation. The rocking cradle-type cutting system minimizes vibration and provides excellent control over the movement of the material being cut. A stable work table and integrated safety supports ensure accurate positioning of timber while preventing unwanted movement. The large carbide-tipped blade, mounted on a robust spindle assembly, minimizes power losses and provides extended tool life. Precision and Performance High cutting accuracy is achieved through smooth material guidance and optimized operating parameters, including a blade speed of 1,400 rpm. The powerful motor (S6: 6.1 kW) enables efficient cutting of both hardwood and dry timber without loss of performance. Operational efficiency and user safety are further improved by the integrated electronic brake and factory-installed blade guards. Lodpfx Aowtp Rlecfjaf Applications The CORMAK PD0700 rocking circular saw is suitable for: Preparing firewood in private households and farms Carpentry workshops and craft businesses Municipal and service companies involved in wood processing Agricultural and forestry applications requiring fast and safe timber cutting Standard Equipment Ø700 mm original carbide-tipped saw blade Blade replacement tools Transport lock Electronic motor brake Phase converter/switch Optional Equipment Adjustable length stops for cutting specific timber lengths Transport and storage covers Technical Specifications Specification Value Maximum Blade Diameter / Bore 700 × 30 mm Maximum Timber Diameter 280 mm Maximum Timber Width 290 mm Blade Speed 1,400 rpm Total Motor Power S6: 6.1 kW / S1: 5.0 kW Power Supply 400 V Weight 98 kg Dimensions (H × W × L) 1170 × 770 × 1070 mm Wheel Track Width 650 mm CE Declaration Yes

Condition: new, Year of construction: 2026, CORMAK ZX7016 is a versatile drilling and milling machine that combines compact dimensions with impressive functionality. Designed to meet the requirements of DIY enthusiasts, it is perfectly suited for precision metalworking. Thanks to the MK2 spindle taper, the machine provides exceptional stability and accuracy during operation. Additionally, the digital readout of the spindle quill extension allows full control over the process, resulting in repeatable and precise results — both in a home workshop and when supporting production processes. The machine has been manufactured in accordance with applicable European Union standards and is CE marked and supplied with an EC Declaration of Conformity. The control panel and safety systems comply with current occupational health and safety requirements. The spindle and gear cover is equipped with a microswitch, providing additional safety during operation. KEY ADVANTAGES OF THE MACHINE: Digital readout of drilling/milling depth Lodpjwvhmwsfx Acfsaf Built-in workshop light integrated into the machine body Durable and professional construction ensuring a long service life Multifunctionality: drilling and milling capabilities in one machine Drive transmission via a reliable belt drive Spindle mounted on precision ball bearings Adjustable spindle height for different applications Through spindle with a thread for mounting work heads IP54-rated safety switch for enhanced user safety Quiet and efficient electric motor ensuring comfortable operation ✔ All mechanical components, including pulleys, are made entirely of metal for maximum durability and reliability ORIGINAL ZX7016 – PRECISION AND STABILITY AS STANDARD The machine is equipped with a solid, heavy-duty cross table, ensuring smooth and precise movement along two axes (X/Y), allowing accurate control of the machining process. A vice can be mounted directly onto the worktable (vice available as optional equipment). The cross worktable is an integral part of the machine's construction, ensuring rigidity and reliability during operation. Technical Specifications: Specification Value Max. drilling diameter 16 mm Max. vertical milling diameter 12 mm Max. face milling width 40 mm Motor S1/S6 0.55 kW / 0.75 kW Motor speed 1420 rpm Voltage / frequency 230 V / 50 Hz Table dimensions (L × W) 420 × 152 mm Table travel along Y-axis 115 mm Table travel along X-axis 230 mm Distance from column to spindle 180 mm Spindle nose height above table 155–355 mm Spindle quill travel 77 mm Spindle taper MK2 Spindle speeds 320, 400, 500, 650, 800, 900, 1350, 1450, 1800, 1900, 2700, 3300 rpm T-slot width and spacing 12 × 80 mm Weight 75 kg Note: The operating parameters provided are for reference only and may vary depending on the type of material being machined, the tool used, and its technical condition (e.g. degree of wear or bluntness). Standard Equipment Drill chuck 1–16 mm Drill chuck arbor Cross worktable Basic hand tools DTR / operating manual

Condition: new, Year of construction: 2026, MRS Cleaner – cleaning and degreasing concentrate MRS Cleaner is a professional alkaline concentrate for cleaning and degreasing parts, machines, equipment, vehicles and metal surfaces. Its low-foaming formula makes the product ideally suited for use in industrial, pressure and automatic washers, as well as equipment with heated cleaning solution. The product is designed for effective removal of grease, oils and other contaminants generated during the operation of machines, vehicles and equipment. MRS Cleaner contains corrosion inhibitors and is recommended, among other applications, for cleaning engines, components and metal parts. Alkaline concentrate for professional cleaning and degreasing MRS Cleaner has been developed for applications requiring effective and efficient industrial cleaning. The alkaline formula facilitates the removal of stubborn dirt, while its low-foaming properties allow convenient use in equipment designed for cleaning parts and components. The product can be used, among other applications, for: Lajdpfszvaygsx Acfof degreasing parts and metal components, cleaning engines and components, cleaning industrial machinery, cleaning agricultural equipment and machinery, cleaning road machinery, cleaning passenger cars and lorries, cleaning forklift trucks, cleaning tractors, cleaning conveyor belts, cleaning containers, cleaning tarpaulins, removing dirt from metal surfaces. Which washers can MRS Cleaner be used in? The concentrate is intended for use, among other applications, in washers with a closed-loop working solution system. It can be used in: automatic washers, pressure washers, washers with heated working solution, equipment for industrial parts cleaning. The best cleaning results are achieved using an aqueous cleaning solution at a temperature of 40–80°C. Recommended concentration The working solution concentration should be adjusted to the type and degree of contamination, the sensitivity of the surface being cleaned and the selected cleaning method. Cleaning method Recommended concentration Immersion cleaning 5–10% Low-pressure cleaning 2–10% High-pressure cleaning 2–5% Concentrate pH value: 12.8 Recommended working solution temperature: 40–80°C 10% concentration – how much ready-to-use solution can you prepare? When preparing a 10% MRS Cleaner cleaning solution, 1L of concentrate can produce up to 10L of ready-to-use working solution. The high concentration of the product allows a large quantity of working solution to be prepared, making MRS Cleaner an economical solution for regular cleaning and degreasing of parts, machines and equipment. Key advantages of MRS Cleaner alkaline concentrate for cleaning and degreasing, low-foaming formula suitable for professional washers, contains corrosion inhibitors, concentrate pH value: 12.8, designed for cleaning parts and metal surfaces, recommended for cleaning engines and components, suitable for automatic and pressure washers, suitable for use in equipment with heated working solution, recommended operating temperature 40–80°C, wide range of applications in industry, automotive, agriculture and transport, at a 10% concentration, 1L of concentrate can be used to prepare up to 10L of ready-to-use working solution.

Condition: new, Year of construction: 2026, The CORMAK Q15E16-2 electric stacker is a compact warehouse machine designed for transporting, lifting, and handling loads weighing up to 1,500 kg. Its maximum lifting height of 1,600 mm enables efficient pallet handling, loading and unloading of goods, and placing loads on low-level racks and platforms. The stacker is operator-controlled and equipped with electric drive and lifting systems, reducing physical effort and increasing the efficiency of daily material-handling operations. Its compact dimensions, overall width of 780 mm, and turning radius of 1,350 mm make it easy to maneuver in warehouses, production halls, and other areas with limited space. Key advantages of the Q15E16-2 stacker 1,500 kg load capacity – enables handling of heavier pallets and warehouse loads. 1,600 mm lifting height – suitable for loading, unloading, and placing goods on elevated surfaces and lower rack levels. Electric drive – the 0.75 kW motor improves load transport and reduces operator effort. Electric lifting – the 2.2 kW lifting motor ensures efficient load handling. Compact design – the 780 mm width and 1,350 mm turning radius facilitate operation in narrow aisles. 2 × 12 V / 85 Ah batteries – provide power for the electric drive and lifting systems. Polyurethane wheels – well suited for typical warehouse and industrial floors. Electromagnetic brake – supports safe stopping and control of the stacker during operation. 1,150 mm forks – designed for standard pallet-handling and transport operations. Efficient warehouse operation The CORMAK Q15E16-2 is designed for everyday internal material transport. Its 1,500 kg load capacity combined with a 500 mm load center allows efficient handling of loads while maintaining the machine's compact dimensions. The travel speed is 3.5 km/h with a load and 4 km/h without a load, making the stacker suitable both for precise maneuvering and for transporting goods between workstations. The Q15E16-2 uses two independent drive systems: 0.75 kW travel motor, 2.2 kW lifting motor. Equipment and key components electric drive system, electric lifting system, 1,150 mm forks, 2 × 12 V / 85 Ah batteries, polyurethane wheels, electromagnetic braking system, mast with a maximum lifting height of 1,600 mm. Technical specifications Parameter Specification Lodozu I Ngspfx Acfjaf Maximum lifting height 1,600 mm Load capacity 1,500 kg Load center 500 mm Fork length 1,150 mm Outer fork width 560 mm Height with forks lowered 2,090 mm Height with mast raised 2,090 mm Minimum fork height 80 mm Overall width 780 mm Overall length 1,770 mm Ground clearance 20 mm Turning radius 1,350 mm Travel speed with / without load 3.5 / 4 km/h Lifting speed with / without load 85 / 110 mm/s Lowering speed with / without load Not specified Gradeability with / without load 3 / 10% Service brake type Electromagnetic Drive motor power 0.75 kW Lifting motor power 2.2 kW Battery capacity 12 V / 85 Ah, 2 pcs. Wheel material Polyurethane Weight 390 kg

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Pressure Parts Washer – Precision Cleaning with a Closed-Loop System The MP160 pressure parts washer is a professional machine designed for intensive cleaning of industrial, workshop, and automotive components. The enclosed working cabinet, operating pressure of 5–8 bar, and the ability to heat the detergent to 70°C ensure effective removal of oils, grease, carbon deposits, process residues, and other stubborn contaminants. The closed-loop system allows the cleaning solution to be reused, reducing detergent consumption and helping maintain a cleaner, more organized workplace. The MP160 is ideal for cleaning components with complex shapes, narrow channels, recesses, and other hard-to-reach surfaces. Key Advantages of the MP160 Parts Washer 5–8 bar operating pressure – enables effective removal of stubborn contaminants from components with complex geometries. Detergent heating up to 70°C – improves the effectiveness of the cleaning solution and helps reduce cleaning time. Closed-loop cleaning solution system – reduces detergent consumption and the amount of waste generated during operation. Dual-function cleaning gun – allows the application of cleaning solution with compressed air or blow-off cleaning using compressed air alone. Component drying function – after cleaning, components can be blown dry using compressed air. Operating pressure gauge – allows continuous monitoring of operating pressure. Lasdpfx Aeztwkdecfsf Clear control panel – provides independent control of the power supply and heating system. Steel cabinet construction – designed for regular use in workshops and industrial facilities. Adjustable leveling feet – ensure stable positioning and proper leveling of the workstation. Parts Cleaning Concentrate Included The MP160 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Effective Cleaning of Hard-to-Reach Surfaces The pressure spray system allows the cleaning solution to be directed precisely onto contaminated areas. This makes the MP160 suitable for cleaning gaps, recesses, openings, channels, and components with irregular shapes. After cleaning, the operator can switch the gun to compressed-air-only mode. This makes it easier to remove residual cleaning solution from the component's surface and prepare parts for further servicing, inspection, assembly, or refurbishment. Standard Equipment Dual-function gun for spraying cleaning solution and blow-off cleaning with compressed air Cleaning solution heating system Control panel Operating pressure gauge Adjustable stabilizing feet 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 160 l Maximum detergent temperature 70°C Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Overall dimensions 770 × 600 × 1,330 mm Weight 47 kg

Condition: new, Year of construction: 2026, functionality: fully functional, 140L Parts Washer The 140L parts washer is a professional workshop cleaning machine designed for the effective removal of oil, grease, deposits, and other stubborn contaminants from mechanical parts and components. The closed-loop cleaning solution system allows for efficient use of the cleaning fluid while reducing consumption. The large tank capacity, robust construction, and convenient working area make the 140L workshop parts washer an excellent choice for mechanical workshops, automotive service centers, manufacturing facilities, and maintenance departments. Key Advantages of the 140L Workshop Parts Washer 140-liter tank capacity – provides ample space for cleaning larger parts and components. Up to 90 liters of cleaning solution – the large working fluid capacity allows for longer operation without frequent refilling. Efficient 2.7–3.6 l/min pump – enables precise application of the cleaning solution to the components being cleaned. Closed-loop system – allows the cleaning solution to be reused and helps reduce consumption. Automatic lid lock – improves operator safety and convenience. Stable four-leg construction – provides excellent stability during operation. Practical work surface – provides a convenient place to put tools, parts, and accessories. Parts Cleaning Concentrate Included The MP140 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Parts Washer Construction and Operating Principle Ledpfeztwh Aox Acfoaf The 140L parts washer is equipped with a flexible hose fitted with a spray nozzle. The cleaning solution is drawn from the tank and delivered through the pump to the hose, allowing the operator to precisely direct the stream onto contaminated surfaces. For proper operation, the pump inlet must be completely submerged in the cleaning solution. This ensures an adequate flow of cleaning fluid during operation. The tank lid opens conveniently and automatically locks in the raised position, improving operator safety. The entire unit is mounted on a robust steel frame with four legs, providing stability even during intensive use. With dimensions of 1,130 × 540 × 885 mm, the parts washer can be installed in most workshop environments while still providing a large and practical working area. Standard Equipment Working tank with automatically locking lid Pump with flexible hose and spray nozzle Steel frame with four legs Work surface beneath the tank Assembly and operating instructions 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Tank capacity 140 l Maximum cleaning solution capacity 90 l Pump flow rate 2.7–3.6 l/min Power supply 230 V Overall dimensions 1,130 × 540 × 885 mm Working tray dimensions 800 × 500 mm Weight 43 kg

Condition: new, Year of construction: 2026, functionality: fully functional, AURORA MP150 Pressure Parts Washer The AURORA MP150 pressure parts washer is a compact workshop cleaning machine designed for cleaning mechanical parts, tools, and components. The enclosed working cabinet helps reduce liquid splashing, while the operating pressure of 5–8 bar makes it easier to remove oil, grease, carbon deposits, and other stubborn contaminants. The parts washer uses a closed-loop cleaning solution system, allowing the cleaning fluid to be reused during ongoing work. The dual-function pneumatic gun enables both cleaning with a mixture of cleaning solution and compressed air and subsequent blow-off and drying of cleaned components. AURORA MP150 Workshop Parts Washer – Key Advantages 5–8 bar operating pressure – effectively removes oil, grease, carbon deposits, and other contaminants, including from hard-to-reach areas. Dual-function pneumatic gun – enables cleaning with cleaning solution and compressed air, as well as blow-off cleaning using compressed air alone. Closed-loop cleaning solution system – helps reduce cleaning agent consumption during regular operation. Working cabinet lighting – provides better visibility of cleaned surfaces, openings, and hard-to-reach areas. Integrated work gloves – make it easier to handle components without opening the cabinet. Lid support cylinders – make opening and closing the working chamber easier. Cabinet ventilation – supports air circulation while the machine is operating. Compact benchtop design – the parts washer can be placed on a stable and sufficiently strong table or workbench. Parts Cleaning Concentrate Included The MP150 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Parts Washer with Dual-Function Pneumatic Gun The AURORA MP150 is equipped with a pneumatic gun featuring two operating modes, allowing a single device to perform both thorough cleaning and blow-off drying of components. In cleaning mode, a mixture of cleaning solution and compressed air is discharged from the nozzle. The pressurized stream helps remove contaminants from openings, channels, recesses, and surfaces with complex shapes. After cleaning, the gun can be switched to blow-off mode. Compressed air removes residual cleaning solution from surfaces and hard-to-reach areas, making it easier to prepare components for further use, inspection, repair, or assembly. The AURORA MP150 Parts Washer Comes as Standard With Dual-function pneumatic gun Integrated work gloves Interior cabinet lighting Ventilation system Lid support cylinders Compressed air supply adjustment 2 liters of concentrate for workshop parts washers Laodpeztwg Sefx Acfjf Technical Specifications Specification Value Cabinet capacity 150 l Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Dimensions 770 × 610 × 700 mm Weight 29 kg Gun Dual-function pneumatic Cabinet lighting Yes Ventilation Yes

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MP180 Pressure Parts Washer The CORMAK MP180 pressure parts washer is a professional industrial cleaning machine designed for the effective removal of heavy dirt from mechanical, metal, and industrial components. The combination of high pressure, heated cleaning solution, and a stainless steel construction ensures excellent cleaning performance, durability, and convenience in everyday operation. The closed-loop cleaning solution system allows for economical use of the cleaning agent, while the ability to heat the liquid to a temperature of up to 70°C increases the effectiveness of removing stubborn contaminants such as oils, grease, fats, carbon deposits, and other residues. The MP180 parts washer has been designed for professional workshops, service centers, and industrial facilities where precision, durability, and cleaning efficiency are essential. Key Advantages of the MP180 Parts Washer Closed-loop cleaning system with heated cleaning solution – effective removal of stubborn contaminants thanks to an operating temperature of up to 70°C. High operating pressure of up to 8 bar – enables thorough cleaning of hard-to-reach surfaces and heavily soiled components. Stainless steel construction – provides excellent resistance to corrosion, moisture, and intensive use. Dual-function cleaning gun – allows operation using compressed air alone or a mixture of air and cleaning solution, as well as drying components after washing. Adjustable leveling feet – ensure stable positioning of the machine even on uneven surfaces. Parts Cleaning Concentrate Included The MP180 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 MP180 Construction and Technology The MP180 parts washer is equipped with a spacious working chamber and a cleaning solution heating system. The elevated liquid temperature increases the effectiveness of the cleaning process and helps remove stubborn contaminants more quickly. The robust stainless steel construction provides excellent resistance to moisture, dirt, and demanding working conditions. This makes the machine suitable for regular use in workshops, service centers, and industrial facilities. Standard Equipment Dual-function gun – air / liquid + air Cleaning solution heating system 180-liter working chamber Stainless steel construction Adjustable leveling feet 2 liters of concentrate for workshop parts washers Technical Specifications Parts washer capacity 180 l Voltage 230 V Frequency 50 Hz Weight 56 kg Height with legs 1,450 mm Height without legs 920 mm Internal width 740 mm Internal height to open lid 410 mm Internal depth 500 mm Loading height 360 mm Lsdpfeztwa Sex Acfoaf Loading width 700 mm

Condition: new, Year of construction: 2026, Heavy-Duty Lever Jack – 5000 kg Capacity The heavy-duty lever jack is a reliable tool designed for professionals who require strong and durable equipment for everyday use in demanding environments. With an impressive lifting capacity of up to 5,000 kg, this tool is ideal for a wide range of industries, including manufacturing, construction, logistics, and automotive services. It is an excellent solution for lifting and moving heavy machinery, steel structures, pallets, and other bulky objects. One of the key advantages of this jack is its well-designed construction, combining durability with functionality. The total length of 1,540 mm provides an optimal operating range, allowing the user to operate the tool precisely and safely, even in confined or challenging spaces. The ergonomic lever design and appropriately shaped handle ensure comfortable operation while minimizing the effort required to lift even the most demanding loads. Despite its high strength and durability, the jack is relatively lightweight, weighing approximately 10 kg, which makes it easy to transport and operate. This is a significant advantage, particularly in situations where mobility and quick response to changing operational requirements are essential. Thanks to the use of high-quality materials and precision manufacturing, the jack offers a long service life, excellent resistance to damage, and reliable performance even under intensive use. The device has been designed with safety and work efficiency in mind. The two-wheel base provides stability and easy maneuverability, which is particularly important when moving heavy loads over short distances. In addition, the robust construction of the jack minimizes the risk of failure, ensuring trouble-free operation over an extended period of time. In summary, the 5,000 kg capacity lever jack, with a total length of 1,500 mm and a weight of approximately 10 kg, is an essential tool for any professional who needs reliable equipment for handling heavy loads. Its versatility, durability, and ease of use make it an excellent choice for businesses and individuals who refuse to compromise on quality and workplace safety. Technical Specifications Lifting capacity: 5,000 kg Overall length: 1,540 mm Tube diameter: 40 mm Nose plate thickness: 11 mm Nose plate width: 64 mm Weight: approx. 10 kg Lajdovxrt Iopfx Acfof

Condition: new, Year of construction: 2026, functionality: fully functional, LUFT 1000 COMPACT Screw Compressor with Refrigerated Air Dryer and 500 L Compressed Air Tank The LUFT 1000 COMPACT screw compressor with an integrated refrigerated air dryer and a 500 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 1000 COMPACT screw compressor with refrigerated air dryer 500 L horizontal compressed air receiver Lsdpforh E Dqsx Acfsaf Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 1000 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 1000 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 3/4" Dimensions 1840 × 650 × 1675 mm Weight 400 kg

Condition: new, Year of construction: 2026, MDC750 Metal Dust and Chip Extractor – 230V is a high-performance extraction unit designed for metalworking stations where effective removal of contaminants such as metal chips, filings, and dust is essential. Thanks to its compact design, durable motor, and high extraction efficiency, it is a reliable solution for professional metalworking workshops, production plants, and workstations equipped with belt, bench, and disc grinders. This metal extraction system provides a clean and safe working environment while maintaining stable extraction performance. Main advantages of the machine High extraction efficiency – airflow capacity up to 1800 m³/h without a bag, ensuring effective removal of even fine metal dust and filings. Compact design – a stable, well-balanced housing allows operation in limited workshop spaces. Quick access to the collection container – simplifies regular emptying and reduces downtime. Easy filter replacement – minimizes maintenance time. Suitable for various machines – an ideal metal chip extractor and grinder dust extraction system for small and medium-sized workshops. Design and technology The MDC750 has been designed for intensive operation in industrial environments. The construction is based on a durable steel housing and an efficient filtration system that effectively separates metal dust and chips. The suction unit is powered by a 0.75 kW motor, providing appropriate airflow parameters. The 350 mm diameter impeller generates stable suction pressure, allowing efficient removal of even heavier metal particles. The machine is equipped with a 1 × 100 mm suction port, making it compatible with the most common metalworking stations. The large collection container ensures long operating periods without frequent emptying. Precision and work efficiency The applied design solutions ensure constant performance during both metal chip extraction and fine dust removal. The extraction capacity of 1520 m³/h with a bag allows efficient operation of both single and multiple workstations. The compact dimensions make the unit easy to relocate and integrate into existing workshop layouts. Applications The MDC750 metal extractor is designed for professional applications, especially: bench, belt, and disc grinding stations, small and medium-sized metalworking workshops, metal component preparation and finishing stations, processes requiring effective removal of metal chips and dust. Standard equipment Basic filter Chip and metal filing collection container 100 mm suction port Set of mounting components and consumable elements Technical specifications Parameter Value Motor power 0.75 kW Lodpfx Acoztn Sfsfoaf Voltage 230V / 50 Hz Suction ports 1 × 100 mm Extraction capacity without bag 1800 m³/h Extraction capacity with bag 1520 m³/h Impeller diameter 350 mm Dimensions 870 × 560 × 1170 mm Weight 31 kg

Condition: new, Year of construction: 2026, MDC1500/400 Metal Chip Extractor The MDC1500/400 metal chip extractor is an industrial machine designed for intensive use at grinding and welding stations, as well as wherever effective removal of metal chips and dust is required. This model provides high extraction performance, stable airflow and filtration adapted to the demanding conditions typical of metal production and processing. Key Advantages Two-stage filtration – quick, tool-free replacement of the two filter cartridges improves chip separation efficiency. High extraction performance – up to 2,200 m³/h without a bag, ensuring stable operation even when handling large quantities of metal chips. Mobile design – the compact wheeled housing makes it easy to move the unit between workstations. Large collection container – extends operating time without the need for frequent emptying. Dual suction inlet, 2 × 100 mm – allows two machines to be connected simultaneously. Design and Technology Ledpfx Acovuq Amofeaf The MDC1500/400 is equipped with a high-performance motor operating at S1 100%: 1.5 kW and S6 40%: 2.1 kW, ensuring stable extraction performance even during extended operation. The 400 V / 50 Hz power supply provides reliable operation and consistent impeller performance. The dual-inlet system, 2 × 100 mm, enables efficient extraction from two sources. The optimised suction system design allows an airflow rate of up to 2,200 m³/h without a bag. When operating with a bag or hose, the extraction capacity is 1,500 m³/h, which is still fully sufficient for workstations generating large quantities of metal dust and chips. Precision and Performance The MDC1500/400 metal chip extractor has been developed to maintain a stable, linear airflow. Its robust housing minimises vibrations, while the precisely designed filtration system ensures optimal capture of dust generated during grinding, deburring and welding. As a result, the unit effectively helps keep the workstation clean and improves the working conditions for the operator. Applications The MDC1500/400 is a versatile, professional extraction unit for grinders and machining workstations operating in continuous-duty conditions. It is ideally suited for: grinding tables, welding tables, bench, belt and disc grinders, manual and mechanical processing workstations where metal chips and swarf are generated. Standard Equipment two filter cartridges, large container for metal chips and swarf, compact and mobile housing, dual suction inlet, 2 × 100 mm. Technical Data Parameter Specification Motor S1 100%: 1.5 kW; S6 40%: 2.1 kW Voltage 400 V / 50 Hz Suction inlets 2 × 100 mm Extraction capacity without bag 2,200 m³/h Extraction capacity with bag/hose 1,500 m³/h Dimensions 850 × 670 × 765 mm Weight 72 kg

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Ledpeua Eu Nefx Acfoaf Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h

Year of construction: 2026, condition: new, CORMAK Refrigerated Compressed Air Dryer is a professional industrial device designed for effective removal of moisture, water vapour, and oil particles from compressed air systems. Using efficient refrigeration technology, the refrigerated air dryer ensures stable operation of compressed air-powered equipment, extending their service life and improving reliability. It is an ideal solution for companies looking for modern compressed air treatment methods in pneumatic installations. Main advantages of the CORMAK compressed air dryer Advanced refrigeration system — the two-stage air cooling process down to the dew point ensures effective separation of moisture and oil particles. Stable operation in systems up to 10 bar — the device is designed for use in standard industrial compressed air installations. High efficiency — capacity of up to 7000 l/min makes the dryer an effective solution for medium and large compressed air systems. Energy-saving design — the use of a variable-speed fan reduces power consumption to only 1.37 kW. Automatic condensate drain valve — ensures reliable condensate removal without the need for operator supervision. Compact dimensions and easy installation — ideal for upgrading existing pneumatic systems. Design and technology Laedomt Dcxjpfx Acfef The refrigerated compressed air dryer has been designed for maximum efficiency and long-term durability. Its main structural components include: 1. Air-to-air heat exchanger During the first stage of the process, incoming compressed air passes through a heat exchanger, where it is pre-cooled by colder air leaving the evaporator. The counterflow design improves heat recovery and increases the overall energy efficiency of the system. 2. Refrigeration system evaporator During the second stage, compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This causes the water vapour and oil particles contained in the air to condense. 3. Condensate separator After cooling, the mixture of air and condensate enters a high-efficiency separator, where condensed water and oil are separated and automatically discharged outside the unit. 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity according to actual operating requirements. This reduces energy consumption and extends the service life of system components. Equipment included Automatic condensate drain valve Integrated water and oil separator Variable-speed fan with automatic adjustment to operating conditions Electronic control system ensuring stable operating parameters Compact and durable housing resistant to industrial environments Technical specifications Parameter Value Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Capacity 7000 l/min Power consumption 1.37 kW Supply voltage 230 V Dimensions (L × W × H) 1000 × 550 × 920 mm Weight 95 kg Refrigerant type and quantity R410a, 900 g